Characterization of human heterophil hemolysins induced by Schistosoma mansoni infection

Heterophil antibodies could be detected in sera from normal or from patient with chronic schistosomiasis. Their hemolytic activities depend on the integrity of the complement classic pathway. The heterophil antibodies from patient sera presented a higher specificity for Schistosoma mansoni antigen preparations than those detected in normal sera. Most of the hemolytic activity observed in normal sera can be destroyed at 56ºC for 4 min. On the other hand, about 80% of the sera from infected patients are partially or totally resistant to this heat-treatment. The hemolytic activities of sera were eluted from a gel filtration column in different fractions of the first peak.

Behavior study of pipes after forming, coating and bending

A study of the main types of coatings and its processes that modern industry commonly apply to prevent to the corrosion due to the environmental effects to energetic market pipelines have been done. Extracting main time and temperature range values, coating heat treatment recreation have been applied to x65 pipelines steel grade samples obtained from a pipe which was formed using UOE forming process. Experimental tensile tests and Charpy V‐Notch Impact test have been carried out for a deeply knowledge of the influence on the steel once this recreations are applied. The Yield Strength and toughness have been improved despite lower values in rupture strain and ductile‐brittle temperature transition have been obtained. Finite Element Method have been applied to simulate the entirely pipe cold bending process to predict the mechanical properties and behaviour of the pipe made from x65 steel grade under different conditions.

Latex constituents from Calotropis procera (R. Br.) display toxicity upon egg hatching and larvae of Aedes aegypti (Linn.)

Calotropis procera R. Br. (Asclepiadaceae) is a well-known medicinal plant with leaves, roots, and bark being exploited by popular medicine to fight many human and animal diseases. This work deals with the fractionation of the crude latex produced by the green parts of the plant and aims to evaluate its toxic effects upon egg hatching and larval development of Aedes aegypti. The whole latex was shown to cause 100% mortality of 3rd instars within 5 min. It was fractionated into water-soluble dialyzable (DF) and non-dialyzable (NDF) rubber-free materials. Both fractions were partially effective to prevent egg hatching and most of individuals growing under experimental conditions died before reaching 2nd instars or stayed in 1st instars. Besides, the fractions were very toxic to 3rd instars causing 100% mortality within 24 h. When both fractions were submitted to heat-treatment the toxic effects were diminished considerably suggesting low thermostability of the toxic compounds. Polyacrylamide gel electrophoresis of both fractions and their newly fractionated peaks obtained through ion exchange chromatography or desalting attested the presence of proteins in both materials. When submitted to protease digestion prior to larvicidal assays NDF lost most of its toxicity but DF was still strongly active. It may be possible that the highly toxic effects of the whole latex from C. procera upon egg hatching and larvae development should be at least in part due to its protein content found in NDF. However the toxicity seems also to involve non protein molecules present in DF.

Estudi per calorimetria del recuit i la recristal·lització de coure trefilat

A la indústria de trefilatge de coure, el fil elèctric es fabrica per deformació en fred d'un alambró de secció considerable (uns 5 mm de diametre). Per tal d'aconseguir calibres inferiors al mm són necessaris multiples passos per sengles fileres on el gruix es redueix progressivament. La deformació plàstica en fred comporta una reducció de la ductilitat de tal manera que mes enllà d'una determinada reducció de secció el fil es trencaria. Per això, és necessari un recuit tèrmic amb el qual es recupera la ductilitat inicial. El procés microscòpic principal que explica el canvi de ductilitat és la recristal•lització de l'estructura deformada. L'optimització del procés requereix controlar la temperatura i la durada del recuit. Una tècnica que permet monitoritzar la recristal•lització és la calorimetria, ja que durant el recuit es desprèn calor. Per tant, l'estudi es proposa col laborar en l'optimització del procés amb la predicció de temperatures de recuit per a temps molt curts i per a temps molt llargs. L'estudi s'inicia amb mostres de fil de coure deformat a tracció. Aquestes mostres es recouen a diverses velocitats d'escalfament (des de 10 K/min fins a 80 K/min) per tal d'obtenir els paràmetres cinètics necessaris per a la predicci6 dels recuits isoterms. Aquests paràmetres corresponen a la cinètica de JMAK. Els resultats de la primera sèrie d'experiments s6n esperancadors, però es creu que la mostra comercial no es troba suficientment recuita abans de sotmetre-la a deformació

Anàlisi cinètica experimental d'una recuita de recuperació mitjançant una tècnica de calorimetria diferencial (DSC)

En l’àmbit de la indústria metal·lúrgica és molt freqüent l’ús de tècniques de conformació per deformació (treball en fred o en calent) per tal de donar forma, a metalls o aliatges metàl·lics. Mecànicament, el treball en fred provoca l’increment de la duresa i de la resistència a la tensió i, per contra, la reducció de la ductilitat, de la conductivitat elèctrica i de la resistència a la corrosió. Per tal de millorar les propietats mecàniques afectades per la reducció és on pren rellevància l’ús de la recuita. La recuita és un tractament tèrmic format per tres etapes: la recuperació, la recristal·lització i el creixement del gra. En el present projecte analitzem en detall la recuperació. El projecte té com a objectiu fer l’estudi experimental de la cinètica, durant la recuita de recuperació, d’un aliatge mecànic. Aquest estudi permetrà determinar els paràmetres més rellevants per tal de descriure com evolucionen l’estructura i les propietats del metall durant un tractament tèrmic, en funció del temps de tractament i la temperatura

Síntesi i propietats de vidres metàl•lics massissos i materials nanocomposites basats en Fe per aplicacions com a materials magnètics tous

Estudi realitzat a partir d’una estada a l’ Institut für Komplexe Materialien, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden, entre 2010 i 2011. S'ha explorat l'efecte de les condicions i influència dels elements d'aleació en la capacitat de formació de vidre, l'estructura i les propietats tèrmiques i magnètiques de vidres metàl•lics massissos i materials nanocristal•lins en base Fe. La producció d'aquests materials en forma de cintes de unes 20 micres de gruix ha estat àmpliament estudiada i s'ha vist que presenten unes propietats excel•lents com a materials magnètics tous. El propòsit general d'aquest projecte era l'obtenció de composicions òptimes amb alta capacitat de formar vidre i amb excel•lents propietats magnètiques com a materials magnètics tous combinat amb bones propietats mecàniques. El projecte prenia com a punt de partida l'aliatge [FeCoBSi]96Nb4 ja que és el que presenta millor capacitat de formar vidre i presenta una alta imantació de saturació i baix camp coercitiu. S'ha fet un estudi dels factors fonamentals que intervenen en la formació de l'estat vitri. La composició abans esmentada ha estat variada amb l'addició d'altres elements per estudiar com afecten aquests nous elements a les propietats, la formació de vidre i l'estructura dels aliatges resultants amb l'objectiu de millorar-ne les propietats magnètiques i la capacitat de formació de vidre. Entre altres s'ha usat el Zr, Mo, Y i el Gd per millorar la formació de vidre; i el Co i el Ni per millorar les propietats magnètiques a alta temperatura. S'han estudiat les relacions entre la capacitat de formació de vidre i la seva estabilitat tèrmica, la resistència a la cristal•lització i la estructura de l'aliatge resultant després del procés de solidificació. Per aquest estudi s'han determinat els mecanismes que controlen la transformació i la seva cinètica així com les fases que es formen durant el tractament tèrmic permetent la formulació de models predictius.

In vivo visualization of F-actin structures during the development of the moss Physcomitrella patens.

* The 'in planta' visualization of F-actin in all cells and in all developmental stages of a plant is a challenging problem. By using the soybean heat inducible Gmhsp17.3B promoter instead of a constitutive promoter, we have been able to label all cells in various developmental stages of the moss Physcomitrella patens, through a precise temperature tuning of the expression of green fluorescent protein (GFP)-talin. * A short moderate heat treatment was sufficient to induce proper labeling of the actin cytoskeleton and to allow the visualization of time-dependent organization of F-actin structures without impairment of cell viability. * In growing moss cells, dense converging arrays of F-actin structures were present at the growing tips of protonema cell, and at the localization of branching. Protonema and leaf cells contained a network of thick actin cables; during de-differentiation of leaf cells into new protonema filaments, the thick bundled actin network disappeared, and a new highly polarized F-actin network formed. * The controlled expression of GFP-talin through an inducible promoter improves significantly the 'in planta' imaging of actin.

Variacion del modulo de 'Young' con el tratamiento termico en aceros al carbono hipoeutectoides

En trabajos anteriores se ha constatado que varios aceros al carbono hipoeutectoides, en estado de temple, presentan valores del módulo de Young inferiores a los correspondientes en estado de revenido. En todos los casos la determinación se ha realizado mediante ultrasonidos. En concreto, para el acero C22E (EN 10083), el módulo se incrementa ligeramente desde 209 GPa (material templado) hasta 211 GPa (revenido a 650 °C), para el acero C45E el módulo aumenta desde 199 GPa hasta 211 GPa (revenido a 500 °C) y para el acero C55E el módulo varía desde 202 GPa hasta 209 GPa para el acero revenido a 650 °C. El presente trabajo se centra en la caracterización estructural de los tres aceros mencionados a los distintos estados de tratamiento térmico, utilizando las técnicas de microscopía óptica de reflexión y microscopía electrónica de barrido, y se propone una explicación de la variación del módulo a partir del comportamiento de las dislocaciones y su interacción con átomos de soluto y con otras dislocaciones.

Magnetic properties and martensitic transition in annealed Ni50Mn30Al20

We have studied the effect of heat treatment on the magnetic properties and on the martensitic transition of the Ni50Mn30Al20 alloy. A mixed L21+B2 state is obtained in the as-prepared sample, while no L21 order is retained in the sample quenched from high temperature. For the two heat treatments, the samples order antiferromagnetically, but there is evidence of coexisting ferromagnetic interactions. A martensitic transition occurs below the magnetic one for quenched samples. However, the martensitic transition is inhibited in the as-prepared sample.

Magnetic hardening mechanisms in Nd-Fe-B nanocrystalline material

Microstructural and magnetic measurements of the evolution by heat treatment of initially amorphous Nd16Fe76B8 alloys prepared by melt spinning are presented. Evidence of magnetic hardening above a threshold temperature induced by magnetic isolation of the Nd2Fe14B grains is provided. A thermodynamic and kinetic explanation of local melting of the intergranular nanostructured Nd¿rich eutectic phase at temperatures below 900 K based on capillary effects is presented. A subsequent Ostwald ripening process moves Nd to wet intimately the hard magnetic grains, becoming, on cooling, a real paramagnetic isolating thin film (~2.5 nm). By using a simple analogy, it is shown that the switching magnetization field in a single¿domain crystal can be drastically affected through the exchange coupling to neighboring grains with different orientation of the easy axis. This effect should be important enough to reinforce the coercive field of polycrystalline hard magnetic materials and explains the observed enhancement from 0.9 to 1.9 T.

Quality Control/Quality Assurance Testing for Joint Density and Segregation of Asphalt Mixtures, TR-623, 2013

Longitudinal joint quality control/assurance is essential to the successful performance of asphalt pavements and it has received considerable amount of attention in recent years. The purpose of the study is to evaluate the level of compaction at the longitudinal joint and determine the effect of segregation on the longitudinal joint performance. Five paving projects with the use of traditional butt joint, infrared joint heater, edge restraint by milling and modified butt joint with the hot pinch longitudinal joint construction techniques were selected in this study. For each project, field density and permeability tests were made and cores from the pavement were obtained for in-lab permeability, air void and indirect tensile strength. Asphalt content and gradations were also obtained to determine the joint segregation. In general, this study finds that the minimum required joint density should be around 90.0% of the theoretical maximum density based on the AASHTO T166 method. The restrained-edge by milling and butt joint with the infrared heat treatment construction methods both create the joint density higher than this 90.0% limit. Traditional butt joint exhibits lower density and higher permeability than the criterion. In addition, all of the projects appear to have segregation at the longitudinal joint except for the edge-restraint by milling method.

Dewaterability of sewage sludge by ultrasonic, thermal and chemical treatments

Sludges resulting from wastewater treatment processes have a characteristically high water content, which complicates handling operations such as pumping, transport and disposal. To enhance the dewatering of secondary sludge, the effect of ultrasound waves, thermal treatment and chemical conditioning with NaOH have been studied. Two features of treated sludges were examined: their rheological behavior and their dewaterability. The rheological tests consisted of recording shear stress when the shear rate increases and decreases continuously and linearly with time, and when it increases and decreases in steps. Steady-state viscosity and thixotropy were obtained from the rheological tests, and both decreased significantly in all cases with increased treatment intensity. Centrifugation of ultrasonicated and thermally treated sludges allowed the total solid content to be increased by approximately 16.2% and 17.6%, respectively. These dewatered sludges had a lower viscosity and thixotropy than the untreated sludge. In contrast, alkali conditioning barely allowed the sludge to be dewatered by centrifugation, despite decreasing its viscosity and thixotropy.

Teräsvalimon energia-analyysi

Teräksen valuprosessi kuluttaa runsaasti energiaa ja tuottaa merkittävästi lämpöä. Ylimääräinen lämpö on poistettava tuotantotiloista, sillä se sisältää yleensä myös paljon hiukkasia ja muita epäpuhtauksia. Lämmön talteenottaminen vähentää teräsvalimon energiankulutusta, mutta sen toteuttaminen ei ole ongelmatonta. Energia-analyysi selvittää yrityksen energian käytön ja tuotannon kehityksen sekä nykytilan. Analyysi pyrkii selvittämään kohteet, joissa energiaakuluu ja joissa sitä syntyy eniten. Tämä opinnäytetyö on sovellettu teollisuuden energia-analyysi, joka sisältää ehdotuksia energian käytöntehostamismahdollisuuksista ja säästömahdollisuuksista. Ehdotuksissa esitelläänviisi tärkeimmäksi katsottua ja kahdeksan muuta energiansäästökohdetta. Näiden lisäksi on annettu seitsemän ehdotusta muista tuotantoa ja energiansäästöä tukevista toimenpiteistä.

Different concentrations of Mg++ ions affect nuclear matrix protein distribution during thermal stabilization of isolated nuclei.

The nuclear matrix, a proteinaceous network believed to be a scaffolding structure determining higher-order organization of chromatin, is usually prepared from intact nuclei by a series of extraction steps. In most cell types investigated the nuclear matrix does not spontaneously resist these treatments but must be stabilized before the application of extracting agents. Incubation of isolated nuclei at 37C or 42C in buffers containing Mg++ has been widely employed as stabilizing agent. We have previously demonstrated that heat treatment induces changes in the distribution of three nuclear scaffold proteins in nuclei prepared in the absence of Mg++ ions. We studied whether different concentrations of Mg++ (2.0-5 mM) affect the spatial distribution of nuclear matrix proteins in nuclei isolated from K562 erythroleukemia cells and stabilized by heat at either 37C or 42C. Five proteins were studied, two of which were RNA metabolism-related proteins (a 105-kD component of splicing complexes and an RNP component), one a 126-kD constituent of a class of nuclear bodies, and two were components of the inner matrix network. The localization of proteins was determined by immunofluorescent staining and confocal scanning laser microscope. Mg++ induced significant changes of antigen distribution even at the lowest concentration employed, and these modifications were enhanced in parallel with increase in the concentration of the divalent cation. The different sensitivity to heat stabilization and Mg++ of these nuclear proteins might reflect a different degree of association with the nuclear scaffold and can be closely related to their functional or structural role.

Effect of temperature and carpel size during pre-anthesis on potential grain weight in wheat

The effect of environmental conditions immediately before anthesis on potential grain weight was investigated in wheat at the experimental field of the Faculty of Agronomy (University of Buenos Aires, Argentina) during 1995 and 1996. Plants of two cultivars of wheat were grown in two environments (two contrasting sowing dates) to provide different background temperature conditions. In these environments, transparent boxes were installed covering the spikes in order to increase spike temperature for a short period (c. 6 days) immediately before anthesis, i.e. between ear emergence and anthesis. In both environments, transparent boxes increased mean temperatures by at least 3n8 mC. These increases were almost entirely due to the changes in maximum temperatures because minimum temperatures were little affected. Final grain weight was significantly reduced by higher temperature during the ear emergence–anthesis period. It is possible that this reduction could be mediated by the effect of the heat treatment on carpel weight at anthesis because a curvilinear association between final grain weight and carpel weight at anthesis was found. This curvilinear association may also indicate a threshold carpel weight for maximizing grain weight.