Study of polycyclic aromatic hydrocarbons emissions from burning of local wood species in Australia

Four kinds of Australian local wood species were burned in a domestic wood heater installed in a laboratory. The selected wood species include pine, red gum, yellow box and sugar gum, that are the most popular domestic fuel wood in Australia. Particulate matter emissions from burning of each load of wood were sampled isokinetically on filter media from the flue by standard stack emission sampling train. The particle laden filters then went for Gas Chromatography/ Mass Spectrometer (GC/MS) analysis to determine polycyclic aromatic hydrocarbons (PAHs) concentrations. The sampling was conducted under two different burning conditions – air inlet of the combustion chamber fully open and half open. Approximately 15 types of PAHs were detected. Emission factors were derived as microgram of PAHs /kg of wood burned. Total particulate emission factors were also obtained from gravimetric measurement before and after the sampling. PAH emission profiles for four species were generated from the results. Comparisons of emission factors have been conducted among different species of wood, as well as under different burning conditions, ie. fast burning and slowing burning. According to the derived emission factors, pine displayed the highest level of PAHs among the four species, followed by red gum and yellow box, whereas sugar gum showed the lowest level of PAHs. Emission factors were compared between each type of wood under two different burning conditions, the slow burning condition, which was air inlet half open, clearly showed higher PAH levels compared to the fast burning condition. Total PAH fractions on particulate matter were calculated and compared among wood types under two burning conditions. During the fast burning condition, red gum and pine have the higher percentage of PAH to total particulate matter emission than sugar gum and yellow box. When changed to slow burning, the PAH fraction on particulate matter are all increased with sugar gum having the largest increase.

Grain refinement in titanium alloys through thermomechanical processing

Qi developed a novel thermomechanical processing route for the grain refinement of titanium alloys. This leads to a well-balanced superior mechanical property, which is vital for modern air transport. The outcomes of this project are prospective to enhance titanium application and the long-term viability of Australian resources and manufacturing industries.

Inter-hospital 'patient expect' calls of clinical handovers for expected patients transferred from rural to metropolitan hospitals: a retrospective clinical audit

Patients requiring inter-hospital air transport across large geographical spaces are at significant risk of adverse outcomes. The aims of this study were to examine the characteristics of clinical handover conducted by telephone and subsequently transcribed in medical records during the inter-hospital transfer of rural patients, and to identify any deficits of this telephone clinical handover. A retrospective audit was conducted of transcribed telephone handovers ('patient expect' calls) occurring with inter-hospital transfers from two rural hospitals to a metropolitan tertiary hospital of all rural patients (n = 127) between January and June 2012. Patient transport between various sites occurred through the Royal Flying Doctor Service. For these hospitals, patient expect calls constituted the only handover record for clinicians during the time of patient transport. Information on patient identification stickers relating to patients' age or gender did not always correspond with details collected during patient expect calls. The name of a clinician at the receiving hospital authorising the transfer was provided in 14 calls (11.1%). It was difficult to determine who made and received calls, and who accepted responsibility for patients at the receiving site. Deterioration in a patient's condition was made in three calls. Actions to be taken after patients' arrival were included in 24 (19%) calls. Planning was restricted to identifying who to contact to review instructions. Inconsistent and overuse of abbreviations was likely to have affected the ability to accurately read back patient information. Crucial information was missing from calls, which may have contributed to delayed and inappropriate delivery of care.

O mercado doméstico de transporte aéreo de passageiros: modelo de escolha de capacidade empregada em função da ação do regulador e da estrutura da indústria

O presente tabalho apresenta um modelo destinado à análise do mercado doméstico de transporte aéreo de passageiros. O modelo analisado permite acompanhar as escolhas ótimas das companhias aéreas quanto ao número de vôos ofertados e passageiros transportados diante das alterações no valor das tarifas promovidas pelo reguldor, tanto em equilibrio competitvo quanto monopolista e, alternativamente, caso a indústria atue como um oligopólio. Neste último caso, o modelo analisado permite que o equilíbrio da indústria seja mensurado em conjunto com parâmetros conjecturais de comportamento das firmas.

A antinomia existente entre as Convenções de Varsóvia e Montreal e o Código de Defesa do Consumidor: a questão da limitação da responsabilidade do transportador aéreo

O presente trabalho objetiva analisar, sob o ponto de vista doutrinário e jurisprudencial, a discussão sobre a antinomia entre as Convenções de Varsóvia e Montreal, que estipulam um teto máximo de indenizatório às vítimas de acidentes aéreos, e o Código de Defesa do Consumidor que, ao promover a proteção do consumidor, estabelece a indenização integral pelos danos sofridos pelo fato do serviço. Inicialmente, analisa-se regulação internacional do transporte aéreo no tocante ao regime de responsabilidade, atentando-se para sua evolução e origem histórica. Em seguida, contextualiza-se a proteção do consumidor no ordenamento jurídico brasileiro, ressaltando o regime de responsabilidade pelo fato do serviço e o princípio da reparação integral dos danos. Por fim, passa-se para a análise da antinomia existente entre os diplomas, buscando-se a melhor solução diante da atual realidade da sociedade brasileira.

Alternativas del transporte en el Mercado Común Centroamericano

Incluye Bibliografía

An Assessment Of The Economic Impact Of Climate Change On The Transportation Sector In Montserrat

.--I. Introduction.--II. Literature review regarding climate change impacts on international transportation.--III. Economy of the Caribbean subregion and Monserrat.--IV. The international transportaion system in the Caribbean and in Monserrat.--V. Vulnerabilities of international transport system in Monserrat to climate change.--VI. Modelling.-- VII. Economic impact analysis of climate chage on the international transport.-- VIII. Approaches to mitigation and adaptation in the air and sea transportation sectors.-- IX. Conclusions

Identifying problems for choosing suitable areas for installation of a new landfill through GIS technology: A case study

Selecting a suitable place to install a new landfill is a hard work. Bauru is a Brazilian municipality where the local landfill currently in use has a life span that is almost over, and the selection of a new area for a future landfill is crucial and urgent. Here we use a geographic information system (GIS) approach to indicate possible suitable areas for installing the landfill. The considered criteria were: river network and the respective buffer zone, relief, urban areas and their respective buffer zone, existence of Areas for Environmental Protection (AEPs), occurrence of wells and their respective buffer zones, existence of airports and their buffer zones, wind direction, and the road network and its respective buffer zone. Due the facts that (1) Bauru has an urban area relatively large in relation to whole municipal area, (2) Bauru has two airports, and (3) this area encompasses parts of three AEPs, the model showed that there are few areas suitable and moderately suitable in Bauru, and the greater part of the municipality is unsuitable to install a new landfill. Due to this important finding reported here, the local policymakers should consider the suitable or even moderately suitable areas for analysis in situ or look for other creative solutions for destination of the solid waste. We highly encourage the use of GIS in studies that seek suitable areas for future landfills, having found that SIG was a tool that allowed fast and precise work and generated an outcome sufficiently clear of interpretation.Implications: Solid waste (SW) management is one of the main environmental concerns nowadays. Landfilling SW is still the main practice to disposal of such material. However, for many regions, suitable places for landfilling are getting scarce. This study proved this situation for a populous place in a southeastern Brazilian region. This study also showed how the decision makers should manage the problem in order to minimize the amount of SW generated and delivered for the landfill. Massive investment in education is a critical issue to reach the proposed aim.

Eficiência das companhias aéreas brasileiras: uma análise envoltória de dados

Studies about efficiency have gained dimension, in Brazil, since the early 90’s. Same decade that the Civil Aviation System suffers important changes in terms of regulations. Such transformations have echoed effects currently, with some significant trend for international standards. This paper focuses on one of the agents from the Brazilian Civil Aviation System, the airlines companies, which aimed on analyze and evaluate both passengers and cargo air transport, by using data envelopment analysis (DEA), during the period of 2005 to 2010. The yearbooks of ANAC, corresponding at the period from 2005 to 2010, were used as data base in this present study. The technique was applied to 14 companies, which through Stepwise process of variables validation was possible to compose a compact, but complete model, that could translate the reality of companies. This model was composed by one output, Total Income, and by four inputs, Total Costs, Total Domestic Passenger, Total Cargo and Total International Passengers. However, this approach has some flaws. Therefore in order to remedy it, it was required to apply the method Frontier Inverted, one of the alternatives proposed in the literature, which ensured an improvement in the context of efficiencies due to biggest discrimination of airlines. As a result of the DEA-BCC process, oriented by output, TAM 2005 was considered the most efficient company, however GOL and Webjet companies concentrated in 2007 their worst levels

Airport Bird Threat in North America from Large Flocking Birds (geese) (as Viewed by an Engine Manufacturer)--Part 1

In worldwide aviation operations, bird collisions with aircraft and ingestions into engine inlets present safety hazards and financial loss through equipment damage, loss of service and disruption to operations. The problem is encountered by all types of aircraft, both military and commercial. Modern aircraft engines have achieved a high level of reliability while manufacturers and users continually strive to further improve the safety record. A major safety concern today includes common-cause events which involve significant power loss on more than one engine. These are externally-inflicted occurrences, with the most frequent being encounters with flocks of birds. Most frequently these encounters occur during flight operations in the area on or near airports, near the ground instead of at cruise altitude conditions. This paper focuses on the increasing threat to aircraft and engines posed by the recorded growth in geese populations in North America. Service data show that goose strikes are increasing, especially in North America, consistent with the growing resident geese populations estimated by the United States Department of Agriculture (USDA). Airport managers, along with the governmental authorities, need to develop a strategy to address this large flocking bird issue. This paper also presents statistics on the overall status of the bird threat for birds of all sizes in North America relative to other geographic regions. Overall, the data shows that Canada and the USA have had marked improvements in controlling the threat from damaging birds - except for the increase in geese strikes. To reduce bird ingestion hazards, more aggressive corrective measures are needed in international air transport to reduce the chances of serious incidents or accidents from bird ingestion encounters. Air transport authorities must continue to take preventative and avoidance actions to counter the threat of birdstrikes to aircraft. The primary objective of this paper is to increase awareness of, and focus attention on, the safety hazards presented by large flocking birds such as geese. In the worst case, multiple engine power loss due to large bird ingestion could result in an off-airport forced landing accident. Hopefully, such awareness will prompt governmental regulatory agencies to address the hazards associated with growing populations of geese in North America.

Continuous measurements of methane mixing ratios from ice cores

This work presents a new, field-deployable technique for continuous, high-resolution measurements of methane mixing ratios from ice cores. The technique is based on a continuous flow analysis system, where ice core samples cut along the long axis of an ice core are melted continuously. The past atmospheric air contained in the ice is separated from the melt water stream via a system for continuous gas extraction. The extracted gas is dehumidified and then analyzed by a Wavelength Scanned-Cavity Ring Down Spectrometer for methane mixing ratios. We assess the performance of the new measurement technique in terms of precision (±0.8 ppbv, 1σ), accuracy (±8 ppbv), temporal (ca. 100 s), and spatial resolution (ca. 5 cm). Using a firn air transport model, we compare the resolution of the measurement technique to the resolution of the atmospheric methane signal as preserved in ice cores in Greenland. We conclude that our measurement technique can resolve all climatically relevant variations as preserved in the ice down to an ice depth of at least 1980 m (66 000 yr before present) in the North Greenland Eemian Ice Drilling ice core. Furthermore, we describe the modifications, which are necessary to make a commercially available spectrometer suitable for continuous methane mixing ratio measurements from ice cores.

GATS and the Regulation of Trade in Services

This collection of essays takes stock of the key challenges that have arisen since the entry into force of the General Agreement on Trade in Services in the mid-1990s and situates them in the context of the WTO's Doha Development Agenda and the proliferation of preferential agreements addressing services today. The multidisciplinary approach provides an opportunity for many of the world's leading experts and a number of new analytical voices to exchange ideas on the future of services trade and regulation. Cosmopolitan approaches to the treatment of labour mobility, the shape of services trade disciplines in the digital age and pro-competitive regulation in air transport are explored with a view to helping readers gain a better understanding of the forces shaping the changes. An essential read for all those concerned with the evolution of the rules-based trading system and its impact on the service economy.

Do international flights promote FDI? : the role of face-to-face communication

Air transportation facilitates face-to-face interactions across borders for the spatial expansion of manufacturing production. I investigate the impact of international flights on FDI entry by Japanese firms. I find that FDI entry significantly increases with the weekly frequency of flights from Japan, and the positive impact increases with a proxy for an intensity of face-to-face communication between the parent firm and foreign affiliate. The results are robust to estimation methods, additional control variables, and definitions of face-to-face communication. Thus, the results suggest that flights encourage FDI entry through a reduction in face-to-face communication costs.

Strategic Airline Alliances: Advantages for Major Airlines Being Aligned

SSome factors including the deregulation in the U.S and the liberalization in Europe of the airline industry are essential to understanding why the number of partnership agreements between airlines has increased during the last 25 years. These events, coupled with the continuous economic downturn and the 9/11 catastrophe seem to be the perfect framework for the tendency to develop airline strategic alliances. However, it has been observed that this trend was not followed during the period 2005-2008. The purpose of this paper is to analyze if a benefit was experienced by the major airlines who became a member of the current 3 big alliances compared to the major airlines that decided not to become a member or were not admitted into the alliances during 2005-2008. The methodology of this report includes an analysis of several airlines’ performance figures. These performance figures include the revenue passenger kilometers (RPKs), the passenger load factor (PLF) and also the market share (MS). The figures will be compared between the aligned airlines and others which have similar business models. The value of this paper is to reveal whether being aligned provides advantages to major airlines under a bearish airline market in a globalized environment.