Sintesi e caratterizzazione di nuovi monomeri cianoacrilici per applicazioni in embolizzazione arteriosa

Questo elaborato di tesi descrive l'attività scientifica svolta presso il Dipartimento di Chimica Industriale e dei Materiali della Facoltà di Chimica Industriale dell'Università degli Studi di Bologna, il cui scopo principale è stato la sintesi e la caratterizzazione di nuovi monomeri cianoacrilici ad uso biomedicale che auspicabilmente presentino elevata velocità di polimerizzazione e minima adesività. Mediante il metodo di protezione e deprotezione, con reazioni di Diels Alder, dell'etil-2-cianoacrilato (SuperAttackTM) sono stati sintetizzati tre monomeri cianoacrilici aromatici florurati e un monomero cianoacrilico alifatico iodurato. Successivamente i prodotti sono stati testati per valutarne i tempi di polimerizzazione e le proprietà adesive rispetto ad uno dei cianoacrilati maggiormente impiegati in chirurgia. Il risultato di questi studi e stato l'effettivo ottenimento di tre monomeri aventi elevata velocità di polimerizzazione e dotati di scarsa adesività. Il quarto monomero, a causa della sua spiccata tendenza alla polimerizzazione non è risultato testabile.

Acciaio COR-TEN esposto in ambiente urbano-costiero: studio del rilascio di metalli di lega

Il Cor-Ten è un acciaio micro-legato, detto anche acciaio patinabile, che garantisce una buona resistenza alla corrosione da agenti atmosferici. Proprio grazie a questa sua peculiare caratteristica sta conoscendo un vasto impiego in particolare nel campo dell’edilizia e delle infrastrutture. La corrosione infatti interessa tutti i settori produttivi e non, provocando ingenti danni economici. Stime effettuate negli ultimi 40anni da diversi enti internazionali indicano che l’entità di questi danni, pur variando da settore a settore, risulta compresa per i paesi industrializzati tra il 3 e il 4% del PIL. Da questi dati si evince la necessità di proteggere i materiali dalla corrosione; in genere per questo scopo si ricorre a trattamenti superficiali o a rivestimenti protettivi. Queste tecniche non rappresentano però l’unica strada, è possibile infatti agire sulla composizione della lega, come nel caso del Cor-Ten, in modo che l’interazione metallo-ambiente porti alla formazione di una patina protettiva di prodotti di corrosione relativamente stabili. La formazione di questo strato, cosiddetto passivante, protegge il metallo da un’ulteriore attacco corrosivo. Scopo di questo lavoro di tesi è studiare il comportamento di questo materiale in ambiente urbano-costiero in tre differenti stati di finitura in cui è commercialmente disponibile: grezzo, pre-patinato e pre-patinato cerato, focalizzando l’attenzione sugli aspetti ambientali legati al suo utilizzo e cercando di valutare in particolare il rilascio dei metalli di lega nell’ambiente, aspetto fino ad ora non considerato in letteratura. I risultati ottenuti indicano che sembrerebbe preferibile l’utilizzo del materiale grezzo rispetto ai pre-patinati, almeno per quanto riguarda il rilascio di metalli in ambiente. Sulla base dei risultati ottenuti è possibile fornire una stima, per i tre stati di finitura di Cor-Ten A considerati, del quantitativo totale (solubile + estraibile) dei metalli rilasciati in ambiente nei sette mesi di esposizione durante la stagione primaverile-estiva della sperimentazione condotta in questo studio. La quantità rilasciata stimata per il Fe oscilla tra i 0,5 g/m2 per i provini light e i 0,7 g/m2 per i provini dark e grezzi, per il Ni il range è compreso tra i 3,6 mg/m2 dei provini grezzi e i 5 mg/m2 per i light, nel caso del Mn il quantitativo varia dai 6,8 mg/m2 per i light ai 10 mg/m2 per i grezzi. Per il Cr la stima per i provini pre-patinati è simile e si attesta intorno a 1,7 mg/m2, risultando minore (anche se in maniera non rilevate) per i grezzi.

L'utilizzo di carbonati come reagenti per la sintesi "green" di derivati fenolici: l'esempio del 2-fenossi-1-etanolo

2-Phenoxyethanol (ethylene glycol monophenyl ether) is used as solvent for cellulose acetate, dyes, inks, and resins; it is a synthetic intermediate in the production of plasticizers, pharmaceuticals, and fragrances. Phenoxyethanol is obtained industrially by reaction of phenol with ethylene oxide, in the presence of an homogeneous alkaline catalyst, typically sodium hydroxide. The yield is not higher than 95-96%, because of the formation of polyethoxylated compounds. However, the product obtained may not be acceptable for use in cosmetic preparations and fragrance formulations, due to presence of a pungent “metallic” odor which masks the pleasant odor of the ether, deriving from residual traces of the metallic catalyst. Here we report a study aimed at using ethylene carbonate in place of ethylene oxide as the reactant for phenoxyethanol synthesis; the use of carbonates as green nucleophilic reactants is an important issue in the context of a modern and sustainable chemical industry. Moreover, in the aim of developing a process which might adhere the principles of Green Chemistry, we avoided the use of solvents, and used heterogeneous basic catalysts. We carried out the reaction by using various molar ratios between phenol and ethylene carbonate, at temperatures ranging between 180 and 240°C, with a Na-mordenite catalyst. Under specific conditions, it was possible to obtain total phenol conversion with >99% yield to phenoxyethanol in few hours reaction time, using a moderate excess of ethylene carbonate. Similar results, but with longer reaction times, were obtained using a stoichiometric feed ratio of reactants. One important issue of the research was finding conditions under which the leaching of Na was avoided, and the catalyst could be separated and reused for several reaction batches.

Chemical analysis and reactivity of biomass pyrolysis products. Application to the development of carbon-neutral biofuels and chemicals

In this dissertation the pyrolytic conversion of biomass into chemicals and fuels was investigated from the analytical point of view. The study was focused on the liquid (bio-oil) and solid (char) fractions obtainable from biomass pyrolysis. The drawbacks of Py-GC-MS described so far were partially solved by coupling different analytical configurations (Py-GC-MS, Py-GC-MIP-AED and off-line Py-SPE and Py-SPME-GC-MS with derivatization procedures). The application of different techniques allowed a satisfactory comparative analysis of pyrolysis products of different biomass and a high throughput screening on effect of 33 catalysts on biomass pyrolysis. As the results of the screening showed, the most interesting catalysts were those containing copper (able to reduce the high molecular weight fraction of bio-oil without large yield decrease) and H-ZSM-5 (able to entirely convert the bio-oil into “gasoline like” aromatic products). In order to establish the noxious compounds content of the liquid product, a clean-up step was included in the Py-SPE procedure. This allowed to investigate pollutants (PAHs) generation from pyrolysis and catalytic pyrolysis of biomass. In fact, bio-oil from non-catalytic pyrolysis of biomass showed a moderate PAHs content, while the use of H-ZSM-5 catalyst for bio-oil up-grading determined an astonishing high production of PAHs (if compared to what observed in alkanes cracking), indicating an important concern in the substitution fossil fuel with bio-oil derived from biomass. Moreover, the analytical procedures developed in this thesis were directly applied for the detailed study of the most useful process scheme and up-grading route to chemical intermediates (anhydrosugars), transportation fuels or commodity chemicals (aromatic hydrocarbons). In the applied study, poplar and microalgae biomass were investigated and overall GHGs balance of pyrolysis of agricultural residues in Ravenna province was performed. A special attention was put on the comparison of the effect of bio-char different use (fuel or as soil conditioner) on the soil health and GHGs emissions.

Bioanalytical applications of multicolour bioluminescence imaging: new tools for drug discovery and development

The subject of this thesis is multicolour bioluminescence analysis and how it can provide new tools for drug discovery and development.The mechanism of color tuning in bioluminescent reactions is not fully understood yet but it is object of intense research and several hypothesis have been generated. In the past decade key residues of the active site of the enzyme or in the surface surrounding the active site have been identified as responsible of different color emission. Anyway since bioluminescence reaction is strictly dependent from the interaction between the enzyme and its substrate D-luciferin, modification of the substrate can lead to a different emission spectrum too. In the recent years firefly luciferase and other luciferases underwent mutagenesis in order to obtain mutants with different emission characteristics. Thanks to these new discoveries in the bioluminescence field multicolour luciferases can be nowadays employed in bioanalysis for assay developments and imaging purposes. The use of multicolor bioluminescent enzymes expanded the potential of a range of application in vitro and in vivo. Multiple analysis and more information can be obtained from the same analytical session saving cost and time. This thesis focuses on several application of multicolour bioluminescence for high-throughput screening and in vivo imaging. Multicolor luciferases can be employed as new tools for drug discovery and developments and some examples are provided in the different chapters. New red codon optimized luciferase have been demonstrated to be improved tools for bioluminescence imaging in small animal and the possibility to combine red and green luciferases for BLI has been achieved even if some aspects of the methodology remain challenging and need further improvement. In vivo Bioluminescence imaging has known a rapid progress since its first application no more than 15 years ago. It is becoming an indispensable tool in pharmacological research. At the same time the development of more sensitive and implemented microscopes and low-light imager for a better visualization and quantification of multicolor signals would boost the research and the discoveries in life sciences in general and in drug discovery and development in particular.

Sintesi di nuovi derivati tri-componente per target photodynamic therapy della neoplasia prostatica

Therapies for the treatment of prostate cancer show several limitations, especially when the cancer metastasizes or acquires resistance to treatment. In addition, most of the therapies currently used entails the occurrence of serious side effects. A different therapeutic approach, more selective and less invasive with respect either to radio or to chemotherapy, is represented by the photodynamic therapy (PDT). The PDT is a treatment that makes use of photosensitive drugs: these agents are pharmacologically inactive until they are irradiated with light at an appropriate wavelength and in the presence of oxygen. The drug, activated by light, forms singlet oxygen, a highly reactive chemical species directly responsible for DNA damage, thus of cell death. In this thesis we present two synthetic strategies for the preparation of two new tri-component derivatives for photodynamic therapy of advanced prostate cancer, namely DRPDT1 and DRPDT2. Both derivatives are formed by three basic elements covalently bounded to each other: a specific ligand with high affinity for the androgen receptor, a suitably chosen spacer molecule and a photoactivated molecule. In particular, DRPDT2 differs from DRPDT1 from the nature of the AR ligand. In fact, in the case of DRPDT2 we used a synthetically engineered androgen receptor ligand able to photo-react even in the absence of oxygen, by delivering NO radical. The presence of this additional pharmacophore, together with the porphyrin, may ensure an additive/synergistic effect to the photo-stimulated therapy, which than may act both in the presence of oxygen and in hypoxic conditions. This approach represents the first example of multimodal photodynamic therapy for prostate cancer.

Organocatalytic tandem reactions of polyfunctional compounds for the synthesis of enantioenriched heterocycles. Reazioni tandem organocatalitiche di composti polifunzionali per la sintesi di eterocicli enantioarricchiti.

In questo lavoro di tesi sono state sviluppate reazioni domino, tandem e procedure one-pot per ottenere eterocicli enatioarricchiti. Lo sviluppo di queste metodologie sintetiche è molto importante perché permettono di ottenere molecole complesse partendo da prodotti semplici, senza effettuare ripetuti passaggi di purificazione (stop-and-go or step-by-step synthesis). Lo scopo di questo lavoro è di ottenere derivati tetraidrofuranici modificati e derivati ossoazzolinici enantioarrichiti tramite reazioni SN2-Michael o tramite reazioni aldolica-ciclizzazione-Michael usando la catalisi asimmetrica a trasferimento di fase (PTC). Come catalizzatori PTC per imprimere enantioselezione sono stati utilizzati sali di ammonio quaternario derivati dagli alcaloidi della Cinchona. Sono state ottimizzate le condizioni di reazione (base inorganica, temperatura, solvente, tempo di reazione) per i diversi substrati presi in considerazione. I prodotti target sono stati ottenuti con buone rese, ottime diastereoselezioni ma con bassa enantioselezione. I risultati ottenuti richiedono un’ulteriore ottimizzazione e dovranno essere valutate variazioni strutturali dei nucleofili utilizzati. In this thesis were developed domino, tandem reactions and one-pot procedures to obtained enantioenriched heterocycles. The development of these methodologies is very fundamental because they allow to obtain complex molecules starting from raw materials, without carrying out repeated purification steps (stop-and-go or step-by-step synthesis). The purpose of this work is to obtain enantioenriched tetrahydrofuran and oxazoline derivatives through a SN2-Michael reaction or a aldol- cyclization-Michael reaction using the phase-transfer asymmetric catalysis (PTC). For imprint enantioselection we used Cinchona alkaloids quaternary ammonium salts derivatives. The reaction conditions (inorganic base, temperature, solvent, reaction time) were optimised for the different substrates taken into account. The target products were obtained with good yields, excellent diastereoselections but with low enantioselections. The obtained results require further optimization and structural changes in the nucleophiles used must be evaluated.

Polymorphs solvates and co-crystals of molecular materials

The scope of my research project is to produce and characterize new crystalline forms of organic compounds, focusing the attention on co-crystals and then transferring these notions on APIs to produce co-crystals of potential interest in the pharmaceutical field. In the first part of this work co-crystallization experiments were performed using as building blocks the family of aliphatic dicarboxylic acids HOOC-(CH2)n-COOH, with n= 2-8. This class of compounds has always been an object of study because it is characterized by an interesting phenomenon of alternation of melting points: the acids with an even number of carbon atoms show a melting point higher than those with an odd one. The acids were co-crystallized with four dipyridyl molecules (formed by two pyridine rings with a different number of bridging carbon atoms) through the formation of intermolecular interactions N•••(H)O. The bases used were: 4,4’-bipyridine (BPY), 1,2-bis(4-pyridyl)ethane (BPA), 1,2-(di-4-pyridyl)ethylene (BPE) and 1,2-bis(4-pyridyl)propane (BPP). The co-crystals obtained by solution synthesis were characterized by different solid-state techniques to determine the structure and to see how the melting points in co-crystals change. In the second part of this study we tried to obtain new crystal forms of compounds of pharmaceutical interest. The APIs studied are: O-desmethylvenlafaxine, Lidocaine, Nalidixic Acid and Sulfadiazine. Each API was subjected to Polymorph Screening and Salt/Co-crystal Screening experiments to identify new crystal forms characterized by different properties. In a typical Salt/Co-crystal Screening the sample was made to react with a co-former (solid or liquid) through different methods: crystallization by solution, grinding, kneading and solid-gas reactions. The new crystal forms obtained were characterized by different solid state techniques (X-ray single crystal diffraction, X-ray powder diffraction, Differential Scanning Calorimetry, Thermogravimetric Analysis, Evolved gas analysis, FT-IR – ATR, Solid State N.M.R).

Photo- and redox-active supramolecular systems containing metal complexes

The aim of this Ph.D. project has been the photophysical and photochemical characterization of new photo- and redox-active supramolecular systems. In particular we studied two different classes of compounds: metal complexes and dendrimers. Two different families of bis-cyclometalated neutral Ir(III) complexes are presented and their photophysical properties are discussed. The first family of complexes contains two 2-phenylpyridyl (ppy) or 2-(4,6-difluorophenyl)pyridyl (F2ppy) cyclometalated ligands and an ancillary ligand constituted by a phenol-oxazoline (phox), which can be substituted in the third position with a fluorine group (Fphox). In the second part of this study, we present another family of bis-cyclometalated Ir(III) complexes in which the ancillary ligand could be a chiral or an achiral bis-oxazoline (box). We report on their structural, electrochemical, photophysical, and photochemical properties. Complexes containing phox and Fphox ancillary ligands show blue luminescence with very high quantum yield, while complexes with box ligands do not show particularly interesting photophysical properties. Surprisingly these complexes give an unexpected photoreaction when irradiated with UV light in presence of dioxygen. This photoreaction originates a stable, strong blue emitting and particularly interesting photoproduct. Three successive generations of a family of polyethyleneglycol (PEG)-coated Pd(II) tetrabenzoporphyrin (PdTBP)-based dendritic nanoprobes are presented, and their ability to sensitize singlet oxygen and inflict cellular photodamage are discussed. It was found that the size of the dendrimer has practically no effect on the singlet oxygen sensitization efficiency, that approximate the unity, in spite of the strong attenuation of the triplet quenching rate with an increase in the dendrimer generation. Nevertheless, when compared against a commonly used singlet oxygen sensitizer, as Photofrin, the phosphorescent probes were found to be non-phototoxic. The lack of phototoxicity is presumably due to the inability of PEGylated probes to associate with cell surfaces and/or penetrate cellular membranes. The results suggest that protected phosphorescent probes can be safely used for oxygen measurements in biological systems in vivo. A new family of two photoswitchable (G0(Azo) and G1(Azo)) dendrimers with an azobenzene core, two cyclam units as coordination sites for metal ions, and luminescent naphthalene units at the periphery have been characterized and their coordination abilities have been studied. Because of their proximity, the various functional groups of the dendrimer may interact, so that the properties of the dendrimers are different from those exhibited by the separated functional units. Both the naphthalene fluorescence and the azobenzene photoisomerization can be observed in the dendrimer, but it has been shown that (i) the fluorescent excited state of the naphthalene units is substantially quenched by excimer and exciplex formation and by energy transfer to the azobenzene units, and (ii) in the latter case the fluorescence quenching is accompanied by the photosensitized isomerization of the trans → cis, and, with higher efficiency, the cis → trans reaction. Complexation of these dendrimers, both trans and cis isomers, with Zn(II) ions shows that complexes of 1:1 and 2:1 metal per dendrimer stoichiometry are formed showing different photophysical and photochemical properties compared to the corresponding free ligands. Practically unitary efficiency of the sensitized isomerization of trans → cis and cis → trans reaction is observed, as well as a slight increase in the naphthalene monomer emission. These results are consistent with the coordination of the cyclam amine units with Zn(II), which prevents exciplex formation. No indication of a concomitant coordination of both cyclam to a single metal ion has been obtained both for trans and cis isomer.

Functional photoactive and electroactive nanodevices

Most of current ultra-miniaturized devices are obtained by the top-down approach, in which nanoscale components are fabricated by cutting down larger precursors. Since this physical-engineering method is reaching its limits, especially for components below 30 nm in size, alternative strategies are necessary. Of particular appeal to chemists is the supramolecular bottom-up approach to nanotechnology, a methodology that utilizes the principles of molecular recognition to build materials and devices from molecular components. The subject of this thesis is the photophysical and electrochemical investigation of nanodevices obtained harnessing the principles of supramolecular chemistry. These systems operate in solution-based environments and are investigated at the ensemble level. The majority of the chemical systems discussed here are based on pseudorotaxanes and catenanes. Such supramolecular systems represent prototypes of molecular machines since they are capable of performing simple controlled mechanical movements. Their properties and operation are strictly related to the supramolecular interactions between molecular components (generally photoactive or electroactive molecules) and to the possibility of modulating such interactions by means of external stimuli. The main issues addressed throughout the thesis are: (i) the analysis of the factors that can affect the architecture and perturb the stability of supramolecular systems; (ii) the possibility of controlling the direction of supramolecular motions exploiting the molecular information content; (iii) the development of switchable supramolecular polymers starting from simple host-guest complexes; (iv) the capability of some molecular machines to process information at molecular level, thus behaving as logic devices; (v) the behaviour of molecular machine components in a biological-type environment; (vi) the study of chemically functionalized metal nanoparticles by second harmonic generation spectroscopy.

An advanced analytical study on linseed oil paint binder

Drying oils, and in particular linseed oil, were the most common binding media employed in painting between XVI and XIX centuries. Artists usually operated some pre-treatments on the oils to obtain binders with modified properties, such as different handling qualities or colour. Oil processing has a key role on the subsequent ageing of and degradation of linseed oil paints. In this thesis a multi-analytical approach was adopted to investigate the drying, polymerization and oxidative degradation of the linseed oil paints. In particular, thermogravimetry analysis (TGA), yielding information on the macromolecular scale, were compared with gas-chromatography mass-spectrometry (GC-MS) and direct exposure mass spectrometry (DEMS) providing information on the molecular scale. The study was performed on linseed oils and paint reconstructions prepared according to an accurate historical description of the painting techniques of the 19th century. TGA revealed that during ageing the molecular weight of the oils changes and that higher molecular weight fractions formed. TGA proved to be an excellent tool to compare the oils and paint reconstructions. This technique is able to highlight the different physical behaviour of oils that were processed using different methods and of paint layers on the basis of the different processed oil and /or the pigment used. GC/MS and DE-MS were used to characterise the soluble and non-polymeric fraction of the oils and paint reconstructions. GC/MS allowed us to calculate the ratios of palmitic to stearic acid (P/S), and azelaic to palmitic acid (A/P) and to evaluate effects produced by oil pre-treatments and the presence of different pigments. This helps to understand the role of the pre-treatments and of the pigments on the oxidative degradation undergone by siccative oils during ageing. DE-MS enabled the various molecular weight fractions of the samples to be simultaneously studied, and thus helped to highlight the presence of oxidation and hydrolysis reactions, and the formation of carboxylates that occur during ageing and with the changing of the oil pre-treatments and the pigments. The combination of thermal analysis with molecular techniques such as GC-MS, DEMS and FTIR enabled a model to be developed, for unravelling some crucial issues: 1) how oil pre-treatments produce binders with different physical-chemical qualities, and how this can influence the ageing of an oil paint film; 2) which is the role of the interaction between oil and pigments in the ageing and degradation process.

Campionamento e determinazione di sostanze rilevanti per la valutazione della capacità ossidante dell’atmosfera e studio del loro effetto sui materiali ceramici

Carbonyl compounds are very important volatil organic compounds receiving increasing attention due to their critical role in tropospheric organic chemistry and to their effects on human health. They are first photo-oxidation stage of almost all organic compounds and originators of free radicals (OH, O3...). Therfore, continuous determination of their atmospheric concentrations is essential. Currently, field measurements are very limited mainly because of the analytical challenges posed by trace concentrations and interferences arising from atmospheric co-pollutants. Additionally, hydroxyl radical (OH) plays a central role in atmospheric chemistry processes. The measurement of atmospheric OH concentrations is essential for the comprehension of atmospheric chemical and photochemical processes. In this context, objectives of this work were: To perform a continuous survey of atmospheric concentrations of carbonyl compounds on different sites around the area of Bologna. For this purpose, an automatic instrument for the continuous measurement (one hour of time resolution) was developed and used. Additionally, the development of a complete and original analytical method was realised. To develop an original OH generation system in order to evaluate the effect of OH and the reactivity of solid and/or liquid materials of interest. This included the validation of an analytical method for the quantification of OH concentrations generated. Effect of OH on ceramic materials and reactivity of snow surface samples, involved as sink of OH in atmospheric chemistry, were evaluated.