Los intereses estratégicos de EEUU, Rusia, China y Japón como determinantes de la estrategia de mantenimiento de la Estructura en la Península Coreana. 2003-2013.

El propósito principal de esta monografía es ofrecer una perspectiva crítica sobre el conflicto latente en la Península Coreana, haciendo un acercamiento al mismo desde un marco teórico asentado en el realismo estructural de Kenneth Waltz. De este modo, se busca responder a cuestiones sobre los intereses estatales como fundamento básico de las estrategias de mantenimiento de la Estructura en regiones geopolíticamente sensibles. Al final, se llega a la conclusión afirmando que la Estructura ejerce una serie de funciones para garantizar su preservación mediante una acción de convergencia en la conducta de los Estados. Esta realidad ha mantenido a la Península Coreana sin un conflicto bélico en los últimos 50 años, muy a pesar de estar al borde del mismo en varias ocasiones, ya que de llegarse a presentar se rompería la estabilidad de la región, y por ende el Equilibrio de Poderes estaría en grave riesgo.

Síntesi, caracterització química i estudi de l'activitat biològica de nous complexos de Pt(II) amb lligands de tipus diaminocarboxílic i els respectius ésters i derivats peptídics

El cisplatí, PtCl2(NH3)2, ha estat una de les drogues més utilitzades en la quimioteràpia del càncer des del descobriment de la seva activitat. Però degut a la seva alta toxicitat i greus efectes secundaris, s'han sintetitzat nous compostos amb la finalitat de reduir aquests inconvenients. En aquest sentit, el treball desenvolupat en aquesta tesi doctoral ha estat la síntesi i caracterització de tretze complexos de Pt(II) amb la finalitat d'estudiar llur activitat antitumoral. Aquests complexos presenten unes característiques estructurals comunes: geometria cis, dos lligands làbils de tipus clorur i un lligand diaminoquelatant derivat dels àcids d,l-2,3-diaminopropiònic (Hdap) i d,l-2,4-diaminobutíric (Hdab). S'han dissenyat unes estratègies sintètiques a partir de les quals els lligands han estat funcionalitzats amb diferents grups de tipus éster, aminoàcid i peptídic: Etdap·2HCl, Etdab·2HCl, [(dap-Metala)·2CF3COOH], [(dab-Metala)·2CF3COOH], [(dap-phe)·2CF3COOH], [(dab-phe)·2CF3COOH], [(dap-Mettrp)·2CF3COOH], [(dab-Mettrp)·2CF3COOH], [(dap-ASTTTNYT-NH2)·2CF3COOH], essent Metala= éster metílic de L-alanina, phe= L-fenilalanina, Mettrp= éster metílic del L-triptofà. Aquests lligands diaminoquelatants s'han utilitzat per sintetitzar els corresponents complexos de Pt(II): PtCl2(Hdap), PtCl2(Hdab), PtCl2(Etdap), PtCl2(Etdab), PtCl2(dap-Metala), PtCl2(dab-Metala), PtCl2(dap-ala), PtCl2(dab-ala), PtCl2(dap-phe), PtCl2(dab-phe), PtCl2(dap-Mettrp), PtCl2(dab-Mettrp), PtCl2(dap-ASTTTNYT-NH2). A través de diferents tècniques i assaigs biològics (dicroisme circular, electroforesi en gel d'agarosa, microscopia de forces atòmiques, citometria de flux, assaigs de proliferació cel·lular) s'ha pogut demostrar l'activitat antitumoral d'aquests compostos. A través de la tècnica de dicroisme circular (DC) s'ha pogut demostrar que els lligands lliures no interaccionen covalentment amb el DNA de Calf Thymus i no modifiquen l'estructura secundària de la doble hèlix. En canvi, els respectius complexos han demostrat tenir capacitat per interaccionar amb el DNA i modificar la seva estructura secundària. Els complexos PtCl2(Hdap), PtCl2(Hdab) i PtCl2(dab-phe) mostren un comportament similar al cisplatí, generant adductes cis-bifuncionals que distorcionen la doble hèlix de forma no desnaturalitzant amb obertura de la doble cadena. Els complexos PtCl2(Etdap), PtCl2(Etdab), PtCl2(dap-ala), PtCl2(dab-ala), PtCl2(dap-Metala), PtCl2(dab-Metala), PtCl2(dap-phe), PtCl2(dap-ASTTTNYT-NH2) quan interaccionen amb el DNA generen un canvi en la conformació del DNA de la forma B a la forma C, produint-se un augment de la curvatura de l'hèlix per rotació de les bases nitrogenades. En aquests estudis s'ha comprovat que l'estructura del complex influeix en l'efecte generat sobre l'estructura secundària de l'àcid nucleic. En primer lloc, existeix una diferència en el comportament en funció del tamany del lligand diaminoquelatant, de manera que els complexos amb el lligand (dab) provoquen un efecte més remarcable. També s'observa aquest canvi de comportament al passar dels complexos que tenen el grup funcional esterificat als que el tenen protonat. D'aquesta manera, s'observa un major efecte sobre l'estructura secundària del DNA en aquells complexos que tenen el lligand diaminoquelatant de tres metilens (dab) i amb el grup carboxilat terminal protonat. Per tal de modelitzar la interacció d'aquests complexos amb el DNA, s'ha estudiat la interacció d'aquests compostos de Pt(II) amb 5'-GMP a través de RMN-1H, observant la variació dels senyals corresponents al H8 de 5'-GMP. Així s'ha pogut demostrar que aquests compostos interaccionen amb la 5'-GMP a través d'un enllaç covalent Pt-N7, de la mateixa manera a com interacciona el cisplatí. A través d'electroforesi en gel d'agarosa i microscopia de forces atòmiques (AFM) s'ha pogut determinar l'efecte que generen els lligands lliures i els respectius complexos de Pt(II) sobre l'estructura terciària del plasmidi pBR322. Els lligands provoquen un augment de l'agregació de les molècules de DNA i un lleuger augment de la compactació de l'estructura terciària. Aquests resultats s'atribueixen a la capacitat d'aquests compostos a interaccionar per pont d'hidrogen amb el DNA. Els corresponents complexos de Pt(II) provoquen un augment de l'agregació i una important compactació, degut per una banda a la capacitat de l'àtom de Pt a interaccionar covalentment amb el DNA, i per altra banda, a la capacitat del lligand a interaccionar per pont d'hidrogen amb l'àcid nucleic. Finalment s'ha estudiat l'activitat citotòxica d'aquests complexos de Pt(II) en diferents línies cel·lulars: A431 (línia de carcinoma epidermoide), HeLa (línia de carcinoma de coll d'úter) i HL-60 (línia promielocítica de leucèmia). Els complexos moderadament solubles en aigua, PtCl2(Hdap), PtCl2(Hdab), PtCl2(dap-ala), PtCl2(dab-ala), PtCl2(dap-phe) i PtCl2(dab-phe), han demostrat ser actius. L'activitat depèn de la concentració de complex, del temps d'incubació i de la línia cel·lular. Per temps d'incubació alts i concentracions de complex elevades s'observa la màxima activitat. Els complexos de l'alanina, PtCl2(dap-ala) i PtCl2(dab-ala), són els que mostren més activitat, mentre que els compostos de la fenilalanina són els menys actius, degut probablement a la voluminositat del lligand, la qual pot impedir o dificultar el transport del compost a través de la membrana cel·lular. L'activitat citotòxica dels complexos insolubles en aigua, PtCl2(Etdap) i PtCl2(Etdab), queda bloquejada per l'elevada concentració de DMSO (12%) necessària per solubilitzar els compostos. Aquests resultats permeten deduir que la presència d'un 12% de DMSO anul·la l'activitat d'aquests complexos, ja que el DMSO pot coordinar-se amb el Pt ocupant les posicions làbils del complex i evitant que es pugui coordinar amb el DNA. Els assaigs de proliferació cel·lular del complex PtCl2(dap-ASTTTNYT-NH2) i del pèptid lliure ASTTTNYT-NH2 han demostrat que ambdós compostos són actius. Tot i això, l'activitat del complex és superior a la del pèptid lliure, ja que el Pt pot interaccionar covalentment amb el DNA i augmentar l'efecte citotòxic. Per tant, el complex presenta un lligand portador biològicament actiu que pot transportar el metall a través de la membrana cel·lular i facilitar així la seva interacció amb el DNA. A través de la tècnica de citometria de flux s'ha comprovat que en tots els casos la mort cel·lular produïda pels complexos ha estat per apoptosi. Per últim, s'ha sintetitzat i caracteritzat un complex trinuclear de Pt(II), {[Pt(Me2Bpy)2][PtCl2(Me2Bpy)]2}, essent Me2Bpy= 4,4'-dimetil-2,2'-dipiridil. La resolució de la seva estructura per difracció de Raig-X ha permès determinar l'existència d'una interacció intramolecular Pt-Pt de 3.474 Å.

Probing the large-scale topology of the heliospheric magnetic field using Jovian electrons

Jupiter’s magnetosphere acts as a point source of near-relativistic electrons within the heliosphere. In this study, three solar cycles of Jovian electron data in near-Earth space are examined. Jovian electron intensity is found to peak for an ideal Parker spiral connection, but with considerable spread about this point. Assuming the peak in Jovian electron counts indicates the best magnetic connection to Jupiter, we find a clear trend for fast and slow solar wind to be over- and under-wound with respect to the ideal Parker spiral, respectively. This is shown to be well explained in terms of solar wind stream interactions. Thus, modulation of Jovian electrons by corotating interaction regions (CIRs) may primarily be the result of changing magnetic connection, rather than CIRs acting as barriers to cross-field diffusion. By using Jovian electrons to remote sensing magnetic connectivity with Jupiter’s magnetosphere, we suggest that they provide a means to validate solar wind models between 1 and 5 AU, even when suitable in situ solar wind observations are not available. Furthermore, using Jovian electron observations as probes of heliospheric magnetic topology could provide insight into heliospheric magnetic field braiding and turbulence, as well as any systematic under-winding of the heliospheric magnetic field relative to the Parker spiral from footpoint motion of the magnetic field.

Modelling fatigue damage distribution to inform slip and cut policy for riser tensioner ropes

The paper describes a method whereby the distribution of fatigue damage along riser tensioner ropes is calculated, taking account of heave motion, set tension, system geometry, tidal range and rope specification. From these data the distribution of damage along the rope is calculated for a given time period using a Miner’s summation method. This information can then be used to help the operator decide on the length of rope to ‘slip and cut’ whereby a length from the end of the rope is removed and the rope moved through the system from a storage drum such that sections of rope that have already suffered significant fatigue damage are not moved to positions where there is another peak in the distribution. There are two main advantages to be gained by using the fatigue damage model. The first is that it shows the amount of fatigue damage accumulating at different points along the rope, enabling the most highly damaged section to be removed well before failure. The second is that it makes for greater efficiency, as damage can be spread more evenly along the rope over time, avoiding the need to scrap long sections of undamaged rope.

Eye-movements aid the control of locomotion

Eye-movements have long been considered a problem when trying to understand the visual control of locomotion. They transform the retinal image from a simple expanding pattern of moving texture elements (pure optic flow), into a complex combination of translation and rotation components (retinal flow). In this article we investigate whether there are measurable advantages to having an active free gaze, over a static gaze or tracking gaze, when steering along a winding path. We also examine patterns of free gaze behavior to determine preferred gaze strategies during active locomotion. Participants were asked to steer along a computer-simulated textured roadway with free gaze, fixed gaze, or gaze tracking the center of the roadway. Deviation of position from the center of the road was recorded along with their point of gaze. It was found that visually tracking the middle of the road produced smaller steering errors than for fixed gaze. Participants performed best at the steering task when allowed to sample naturally from the road ahead with free gaze. There was some variation in the gaze strategies used, but sampling was predominantly of areas proximal to the center of the road. These results diverge from traditional models of flow analysis.

Uniqueness of signature for simple curves

We propose a topological approach to the problem of determining a curve from its iterated integrals. In particular, we prove that a family of terms in the signature series of a two dimensional closed curve with finite p-variation, 1≤p<2, are in fact moments of its winding number. This relation allows us to prove that the signature series of a class of simple non-smooth curves uniquely determine the curves. This implies that outside a Chordal SLEκ null set, where 0<κ≤4, the signature series of curves uniquely determine the curves. Our calculations also enable us to express the Fourier transform of the n-point functions of SLE curves in terms of the expected signature of SLE curves. Although the techniques used in this article are deterministic, the results provide a platform for studying SLE curves through the signatures of their sample paths.

Extractability and characteristics of proteins deriving from wheat DDGS

Wheat Distillers’ Dried Grains with Solubles (DDGS) and in-process samples were used for protein extraction. Prolamins were the predominant protein components in the samples. The absence of extractable α- and γ-gliadins in DDGS indicated protein aggregation during the drum drying processing stage. Prolamin extraction was performed using 70% (v/v) ethanol or alkaline-ethanol solution in the presence of reducing agent. DDGS extracts had relatively low protein contents (14-44.9%, w/w), regardless of the condition applied. The wet solids were the most suitable raw material for protein extraction, with recovery yields of ~ 55% (w/w) and protein content of ~58% (w/w) in 70% (v/v) ethanol. Protein extracts from wet solids were significantly rich in glutamic acid and proline. Mass balance calculations demonstrated the high carbohydrate content (~ 50%, w/w) of solid residues. Overall, the feasibility of utilising in-process samples of DDGS for protein extraction with commercial potential was demonstrated.

Kerb and urban increment of highly time-resolved trace elements in PM10, PM2.5 and PM1.0 winter aerosol in London during ClearfLo 2012

Ambient concentrations of trace elements with 2 h time resolution were measured in PM10–2.5, PM2.5–1.0 and PM1.0–0.3 size ranges at kerbside, urban background and rural sites in London during winter 2012. Samples were collected using rotating drum impactors (RDIs) and subsequently analysed with synchrotron radiation-induced X-ray fluorescence spectrometry (SR-XRF). Quantification of kerb and urban increments (defined as kerb-to-urban and urban-to-rural concentration ratios, respectively), and assessment of diurnal and weekly variability provided insight into sources governing urban air quality and the effects of urban micro-environments on human exposure. Traffic-related elements yielded the highest kerb increments, with values in the range of 10.4 to 16.6 for SW winds (3.3–6.9 for NE) observed for elements influenced by brake wear (e.g. Cu, Sb, Ba) and 5.7 to 8.2 for SW (2.6–3.0 for NE) for other traffic-related processes (e.g. Cr, Fe, Zn). Kerb increments for these elements were highest in the PM10–2.5 mass fraction, roughly twice that of the PM1.0–0.3 fraction. These elements also showed the highest urban increments (~ 3.0), although no difference was observed between brake wear and other traffic-related elements. All elements influenced by traffic exhibited higher concentrations during morning and evening rush hours, and on weekdays compared to weekends, with the strongest trends observed at the kerbside site, and additionally enhanced by winds coming directly from the road, consistent with street canyon effects. Elements related to mineral dust (e.g. Al, Si, Ca, Sr) showed significant influences from traffic-induced resuspension, as evidenced by moderate kerb (3.4–5.4 for SW, 1.7–2.3 for NE) and urban (~ 2) increments and increased concentrations during peak traffic flow. Elements related to regional transport showed no significant enhancement at kerb or urban sites, with the exception of PM10–2.5 sea salt (factor of up to 2), which may be influenced by traffic-induced resuspension of sea and/or road salt. Heavy-duty vehicles appeared to have a larger effect than passenger vehicles on the concentrations of all elements influenced by resuspension (including sea salt) and wearing processes. Trace element concentrations in London were influenced by both local and regional sources, with coarse and intermediate fractions dominated by traffic-induced resuspension and wearing processes and fine particles influenced by regional transport.

Physical analyses of compost from composting plants in Brazil

Nowadays the composting process has shown itself to be an alternative in the treatment of municipal solid wastes by composting plants. However, although more than 50% of the waste generated by the Brazilian population is composed of matter susceptible to organic composting, this process is, still today, insufficiently developed in Brazil, due to low compost quality and lack of investments in the sector. The objective of this work was to use physical analyses to evaluate the quality of the compost produced at 14 operative composting plants in the Sao Paulo State in Brazil. For this purpose, size distribution and total inert content tests were done. The results were analyzed by grouping the plants according to their productive processes: plants with a rotating drum, plants with shredders or mills, and plants without treatment after the sorting conveyor belt. Compost quality was analyzed considering the limits imposed by the Brazilian Legislation and the European standards for inert contents. The size distribution tests showed the influence of the machinery after the sorting conveyer on the granule sizes as well as the inert content, which contributes to the presence of materials that reduce the quality of the final product. (C) 2007 Elsevier Ltd. All rights reserved.

Students Working on Telephone Poles at the New York Trade School

A group of twelve students are learning how to work on telephone poles at the New York Trade School. Black and white photograph with some minor damage to the image in the bottom left hand corner.

Estudo de pelotização e briquetagem de finos de carvão mineral

O aumento da produção de carvão previsto para os próximos anos nas minas da CRM localizadas em Leão, Butiá, RS, originará uma considerável quantidade de finos beneficiados por ciclonagem autôgena. Estes finos caracterizam-se pelos seus altos teores de umidade e granulometria <1 mm o que onera e dificulta os processos de manuseio, estocagem e transporte. O presente estudo visa à análise comparativa dos processos de aglomeração, a briquetagem e a pelotização com o objetivo de obter um produto com melhores características de comercialização do que o atual. As principais variáveis estudadas na aglomeração por briquetagem foram: teor de umidade, tipo e concentração de agente ligante, relação massa/volume de carvão, tempo e pressão de moldagem. Os melhores resultados em termos de resistência à compressão, foram obtidos utilizando um resíduo de refinaria de petróleo - REVAC - como ligante numa concentração de 10% em peso, uma temperatura de cura de 120° C, um tempo de moldagem de 0,5 minutos e uma pressão de compactação entre 150 e 250 kgf/cm². A pelotização foi estudada utilizando um tambor e um disco de laboratório e as principais variáveis estudadas foram: umidade da alimentação, tipo e concentração de agente ligante, temperatura de cura e outras. Os melhores resultados foram obtidos utilizando como ligante MOGUL (amido de milho pré-gelatinizado em pó) numa concentração de 5% em peso, uma faixa de umidade ótima entre 30 e 40%, uma inclinação do disco entre 45 e 51° e uma temperatura de cura de 80 e 100°C. Os resultados obtidos para ambos os carvões (CE 5900 e CE 4700) são discutidos em termos dos diversos fenômenos que ocorrem na interface carvão-solução-ligante e algumas considerações econômicas são apresentadas.

Sistema de produção sincronizado : uma aplicação em processos produtivos de propriedade contínuos segundo a teoria das restrições

Este trabalho de conclusão investiga o efeito da geração de estoques intermediários nos indicadores principais empregados na Teoria das Restrições (Ganho, Despesa Operacional e Inventário) em uma unidade industrial de processo produtivo de Propriedade contínuo, que emprega embalagens, matérias-primas obtidas em larga escala e cadeias logísticas de longo curso. Este tipo de indústria produz bens de consumo imediato, com pouca variabilidade, de modo “empurrado”. A principal conseqüência é a perda do sincronismo na cadeia logística, resultando em uma grande quantidade de estoques intermediários e custos crescentes, relacionados principalmente ao custo de manutenção destes estoques. Através dos cinco passos de focalização e das ferramentas lógicas da Teoria das Restrições, propõe-se uma alternativa gerencial, que inclui o algoritmo Tambor-Pulmão-Corda e insere a organização em um processo de melhoria contínua, cujos impactos são avaliados por simulação computacional. Através de técnicas estatísticas e software apropriados, constrói-se um modelo de simulação computacional baseado em dados reais de uma planta produtora de cimento. A partir deste modelo, diferentes cenários são testados, descobrindo-se a condição ótima. Chega-se a uma conclusão, considerando a mudança na política de geração de estoques intermediários e seus impactos na redução de custos e riscos.

Utilização da teoria das restrições no ambiente de manufatura em empresas no Brasil

A Teoria das Restrições surgiu no início da década de 80 revolucionando a teoria da manufatura e tendo um desenvolvimento rápido em diferentes países como Estados Unidos, Reino Unido, Holanda, Israel entre outros. No Brasil a difusão dessa metodologia, inicialmente concebida para o ambiente de manufatura, não está suficientemente desenvolvida. Pelos resultados que se acredita poderem decorrer de sua aplicação, é objetivo desta pesquisa detectar empresas que implementaram o sistema TPC em nosso país, verificar quais as vantagens que podem ser obtidas do seu uso e mostrá-las no relatório final, para difundir uma metodologia que acredita-se ser de fácil aplicação nas empresas brasileiras, possibilitando melhorar a competitividade de nossos produtos.

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Colheita mecanizada e perdas quantitativas de sementes de crotalária

In mechanized harvesting of seeds can occur losses, which reduce productivity, decrease the profitability and can do serious damage to the producer. The objective of this work was to evaluate the quantitative seed losses of Crotalaria juncea depending on the harvester speed and the rotation of the threshing cylinder. The experiment was conducted in the area of Education, Research and Production Unesp/Jaboticabal, using a entirely casualized design on factorial away 2x3, with two-speed displacement of the machine (1.8 and 3.2 km h(-1)) and three rotations of threshing cylinder (750, 800 and 850 rpm), with 4 repetitions. It was concluded that the measures relating to the development of the plants showed homogeneous behavior, indicating little dispersion of the data. It was observed that the rate of displacement of the harvester and rotation of the drum track not affected the losses in the plataform of cutting. The largest losses of crotalaria seeds occurred on the plataform of cutting the harvester machine, in the form of pods not harvested. It was observed that the total losses in the harvest of crotalaria seed were high, and the losses in pods on the soil, responsible for almost all the losses encountered.