Everything in di Dark Muss Come to Light: A Postcolonial Investigation of the Practice of Extra Lessons at the Secondary Level in Jamaica's Education System

Despite the vast research examining the evolution of Caribbean education systems, little is chronologically tied to the postcolonial theoretical perspectives of specific island-state systems, such as the Jamaican education system and its relationship with the underground shadow education system. This dissertation study sought to address the gaps in the literature by critically positioning postcolonial theories in education to examine the macro- and micro-level impacts of extra lessons on secondary education in Jamaica. The following postcolonial theoretical (PCT) tenets in education were contextualized from a review of the literature: (a) PCT in education uses colonial discourse analysis to critically deconstruct and decolonize imperialistic and colonial representations of knowledge throughout history; (b) PCT in education uses an anti-colonial discursive framework to re-position indigenous knowledge in schools, colleges, and universities to challenge hegemonic knowledge; (c) PCT in education involves the "unlearning" of dominant, normative ideologies, the use of self-reflexivity, and deconstruction; and (d) PCT in education calls for critical pedagogical approaches that reject the banking concept of education and introduces inclusive pedagogy to facilitate "the passage from naïve to critical transitivity" (Freire, 1973, p. 32). Specifically, using a transformative mixed-methods design, grounded and informed by a postcolonial theoretical lens, I quantitatively uncovered and then qualitatively highlighted how if at all extra lessons can improve educational outcomes for students at the secondary level in Jamaica. Accordingly, the quantitative data was used to test the hypotheses that the practice of extra lessons in schools is related to student academic achievement and the practice of critical-inclusive pedagogy in extra lessons is related to academic achievement. The two-level hierarchical linear model analysis revealed that hours spent in extra lessons, average household monthly income, and critical-inclusive pedagogical tents were the best predictors for academic achievement. Alternatively, the holistic multi-case study explored how extra-lessons produces increased academic achievement. The data revealed new ways of knowledge construction and critical pedagogical approaches to galvanize systemic change in secondary education. Furthermore, the data showed that extra lessons can improve educational outcomes for students at the secondary level if the conditions for learning are met. This study sets the stage for new forms of knowledge construction and implications for policy change.

Self-efficacy and task performance: An investigation from two levels of analysis and specificity

This research adopts a resource allocation theoretical framework to generate predictions regarding the relationship between self-efficacy and task performance from two levels of analysis and specificity. Participants were given multiple trials of practice on an air traffic control task. Measures of task-specific self-efficacy and performance were taken at repeated intervals. The authors used multilevel analysis to demonstrate dynamic main effects, dynamic mediation and dynamic moderation. As predicted, the positive effects of overall task specific self-efficacy and general self-efficacy on task performance strengthened throughout practice. In line with these dynamic main effects, the effect of general self-efficacy was mediated by overall task specific self-efficacy; however this pattern emerged over time. Finally, changes in task specific self-efficacy were negatively associated with changes in performance at the within-person level; however this effect only emerged towards the end of practice for individuals with high levels of overall task specific self-efficacy. These novel findings emphasise the importance of conceptualising self-efficacy within a multi-level and multi-specificity framework and make a significant contribution to understanding the way this construct relates to task performance.

Antecedents of task-specific goal orientation: An investigation of task practice, personality and global goal orientation

Goal orientation, a mental framework for understanding how individuals approach learning and achievement situations, has emerged as an important topic in organisational psychology. This study investigated the effects of task practice, personality (openness to experience and neuroticism), and global goal orientation (predisposition to adopt a certain response pattern across all domains) on participants’ task-specific goal orientation (response pattern adopted for a specific task). One hundred and three participants performed an air traffic control task and their task-specific goal orientation was measured prior to each of a total of thirty trials. Results revealed an effect of task practice such that individuals’ task-specific learning orientation decreased over time while their task-specific prove orientation increased over time. The results also showed that individuals’ personality can influence their task-specific goal orientation and further, that this relationship can be mediated by global goal orientation. Specifically, the positive relationship between openness to experience and task-specific prove orientation was mediated by global prove orientation. Similarly, the positive relationship between neuroticism and task-specific avoid orientation was mediated by global avoid orientation. Theoretical and practical implications of these findings are considered.

A theoretical and experimental account of n-tuple classifier performance

The n-tuple recognition method is briefly reviewed, summarizing the main theoretical results. Large-scale experiments carried out on Stat-Log project datasets confirm this method as a viable competitor to more popular methods due to its speed, simplicity, and accuracy on the majority of a wide variety of classification problems. A further investigation into the failure of the method on certain datasets finds the problem to be largely due to a mismatch between the scales which describe generalization and data sparseness.

Toward understanding inter-organizational knowledge transfer needs in SMEs:insight from a UK investigation

Purpose - External knowledge is generally believed to be of prime importance to small to medium-sized enterprises (SMEs). However, a review of the literature shows that no empirical research has looked at knowledge management issues at the inter-organizational level in SMEs. This paper seeks to report on an empirical investigation with UK SMEs in the service sector to identify their needs and practices regarding inter-organizational knowledge transfer, and thus provide empirical evidence to support the above belief. Design/methodology/approach - A two-tier methodology (i.e. using both questionnaire survey and interview approaches) is deployed to address the main research objectives. A questionnaire survey of SMEs is carried out to investigate their current inter-organizational knowledge transfer situation and managers' perception on various relevant issues. Then 12 face-to-face interviews with SME managers are conducted to further validate key findings drawn from the questionnaire survey. Findings - The empirical evidence collected from the survey and interviews confirms the general belief that external knowledge is of prime importance for SMEs, and demonstrates that SMEs have very strong needs for external knowledge and inter-organizational knowledge transfer. Research limitations/implications - The findings provide very strong underpinning for further theoretical research on inter-organizational knowledge transfer in SMEs. However, this study has certain limitations: its results may not be applicable to other industrial sectors or the same sector in other countries; or to micro or large companies; nor does it involve cross-cultural issues. Originality/value - By adopting a two-tier research methodology, this study provides more reliable understanding and knowledge on SMEs' inter-organizational knowledge transfer needs and practices, and fills the gap that exists in the empirical investigations on the subject. © Emerald Group Publishing Limited.

A qualitative investigation into leader behavioural flexibility

Purpose – The current research aims to determine to what extent Australian managers are behaviourally flexible and to identify what factors are associated with the development of leader behavioural flexibility (LBF) and its contribution to positive organisational outcomes. Design/methodology/approach – Because of the exploratory nature of the questions to be addressed, a qualitative approach to data collection was selected. In particular, the grounded theory methodology was utilised due to its ability to aid with the theory building process. Semi-structured interviews based on the critical incident interview technique were used as the data source. Findings – The findings illustrate that the Australian managers who participated in this study exhibited significant degrees of LBF. The results also suggest that education level and group size may be antecedents to LBF. In addition, it appears that leader-member exchange may mediate the relationship between LBF and positive organisational outcomes, while social intelligence may moderate this relationship. Research limitations/implications – The current research makes several contributions in terms of theoretical development and reveals a richer insight into the underlying processes associated with the relationship between LBF and positive organisational outcomes. Practical implications – As the current research was conducted in the field with 20 practising organisational managers, the findings also highlight some important practical applications regarding LBF. Originality/value – Although previous studies have been able to establish a relationship between LBF and positive organisational outcomes, they have explained very little about the processes associated with this relationship. The present study attempted to uncover some of these processes.

Investigation of the effects of low energy high dose ion bombardment in metals and compound semiconductors

The effect of low energy nitrogen molecular ion beam bombardment on metals and compound semiconductors has been studied, with the aim to investigate at the effects of ion and target properties. For this purpose, nitrogen ion implantation in aluminium, iron, copper, gold, GaAs and AIGaAs is studied using XPS and Angle Resolve XPS. A series of experimental studies on N+2 bombardment induced compositional changes, especially the amount of nitrogen retained in the target, were accomplished. Both monoenergetic implantation and non-monoenergetic ion implantation were investigated, using the VG Scientific ESCALAB 200D system and a d. c. plasma cell, respectively. When the samples, with the exception of gold, are exposed to air, native oxide layers are formed on the surfaces. In the case of monoenergetic implantation, the surfaces were cleaned using Ar+ beam bombardment prior to implantation. The materials were then bombarded with N2+ beam and eight sets of successful experiments were performed on each sample, using a rastered N2+ ion beam of energy of 2, 3, 4 and 5 keV with current densities of 1 μA/cm2 and 5 μA/cm22 for each energy. The bombarded samples were examined by ARXPS. After each complete implantation, XPS depth profiles were created using Ar+ beam at energy 2 ke V and current density 2 μA/cm2 . As the current density was chosen as one of the parameters, accurate determination of current density was very important. In the case of glow discharge, two sets of successful experiments were performed in each case, by exposing the samples to nitrogen plasma for the two conditions: at low pressure and high voltage and high pressure and low voltage. These samples were then examined by ARXPS. On the theoretical side, the major problem was prediction of the number of ions of an element that can be implanted in a given matrix. Although the programme is essentially on experimental study, but an attempt is being made to understand the current theoretical models, such as SATVAL, SUSPRE and TRIM. The experimental results were compared with theoretical predictions, in order to gain a better understanding of the mechanisms responsible. From the experimental results, considering possible experimental uncertainties, there is no evidence of significant variation in nitrogen saturation concentration with ion energy or ion current density in the range of 2-5 ke V, however, the retention characteristics of implantant seem to strongly depend on the chemical reactivity between ion species and target material. The experimental data suggests the presence of at least one thermal process. The discrepancy between the theoretical and experimental results could be the inability of the codes to account for molecular ion impact and thermal processes.

Experimental investigation and CFD simulation of insulation debris transport phenomena in water flow

The investigation of insulation debris generation, transport and sedimentation becomes important with regard to reactor safety research for PWR and BWR, when considering the long-term behavior of emergency core cooling systems during all types of loss of coolant accidents (LOCA). The insulation debris released near the break during a LOCA incident consists of a mixture of disparate particle population that varies with size, shape, consistency and other properties. Some fractions of the released insulation debris can be transported into the reactor sump, where it may perturb/impinge on the emergency core cooling systems. Open questions of generic interest are the sedimentation of the insulation debris in a water pool, its possible re-suspension and transport in the sump water flow and the particle load on strainers and corresponding pressure drop. A joint research project on such questions is being performed in cooperation between the University of Applied Sciences Zittau/Görlitz and the Forschungszentrum Dresden-Rossendorf. The project deals with the experimental investigation of particle transport phenomena in coolant flow and the development of CFD models for its description. While the experiments are performed at the University at Zittau/Görlitz, the theoretical modeling efforts are concentrated at Forschungszentrum Dresden-Rossendorf. In the presentation the basic concepts for CFD modeling are described and feasibility studies including the conceptual design of the experiments are presented.

Experimental investigation and CFD simulation of the behaviour of mineral wool in the reactor sump

The investigation of insulation debris generation, transport and sedimentation becomes important with regard to reactor safety research for PWR and BWR, when considering the long-term behavior of emergency core cooling systems during all types of loss of coolant accidents (LOCA). The insulation debris released near the break during a LOCA incident consists of a mixture of disparate particle population that varies with size, shape, consistency and other properties. Some fractions of the released insulation debris can be transported into the reactor sump, where it may perturb/impinge on the emergency core cooling systems. Open questions of generic interest are the sedimentation of the insulation debris in a water pool, its possible re-suspension and transport in the sump water flow and the particle load on strainers and corresponding pressure drop. A joint research project on such questions is being performed in cooperation between the University of Applied Sciences Zittau/Gorlitz and the Forschungszentrum Dresden-Rossendorf. The project deals with the experimental investigation of particle transport phenomena in coolant flow and the development of CFD models for its description. While the experiments are performed at the University at Zittau/Gorlitz, the theoretical modeling efforts are concentrated at Forschungszentrum Dresden-Rossendorf. In the current paper the basic concepts for CFD modeling are described and feasibility studies including the conceptual design of the experiments are presented. Copyright © 2008 by ASME.

Investigation of some critical aspects of on-line surface measurement by a wavelength-division-multiplexing technique

Some critical aspects of a new kind of on-line measurement technique for micro and nanoscale surface measurements are described. This attempts to use spatial light-wave scanning to replace mechanical stylus scanning, and an optical fibre interferometer to replace optically bulky interferometers for measuring the surfaces. The basic principle is based on measuring the phase shift of a reflected optical signal. Wavelength-division-multiplexing and fibre Bragg grating techniques are used to carry out wavelength-to-field transformation and phase-to-depth detection, allowing a large dynamic measurement ratio (range/resolution) and high signal-to-noise ratio with remote access. In effect the paper consists of two parts: multiplexed fibre interferometry and remote on-machine surface detection sensor (an optical dispersive probe). This paper aims to investigate the metrology properties of a multiplexed fibre interferometer and to verify its feasibility by both theoretical and experimental studies. Two types of optical probes, using a dispersive prism and a blazed grating, respectively, are introduced to realize wavelength-to-spatial scanning.

An investigation of the relationships between service quality, customer satisfaction, perceived value and behavioural intentions

Customer satisfaction and service quality are two important concepts in the marketing literature. However, there has been some confusion about the conceptualisation and measurement of these two concepts and the nature of the relationship between them. The primary objective of this research was to develop a more thorough understanding of these concepts, and a model that could help to explain the links between them and their relationships with post-purchase behaviour. A preliminary theoretical model was developed, based on an exhaustive review of the literature. Following exploratory research, the model was revised by incorporating "Perceived Value" and "Perceived Sacrifice" to help explain customer's post-purchase behaviour. A longitudinal survey was conducted in the context of the restaurant industry, and the data were analysed using structural equation modelling. The results provided evidence to support the main research hypotheses. However, the effect of "Normative Expectations" on "Encounter Quality" was insignificant, and "Perceived Value" had a direct effect on "Behavioural Intentions" despite expectations that such an effect would be mediated through "Customer Satisfaction". It was also found that "Normative Expectations" were relatively more stable than "Predictive Expectations". It is argued that the present research significantly contributes to the marketing literature, and in particular the role of perceived value in the formation of customers' post-purchase behaviour. Further research efforts in this area are warranted.

An Investigation into the adoption and implementation of computer aided production management systems:using the Rogers model of adoption and implementation and a social constuctionist account of technology

The research investigates the processes of adoption and implementation, by organisations, of computer aided production management systems (CAPM). It is organised around two different theoretical perspectives. The first part is informed by the Rogers model of the diffusion, adoption and implementation of innovations, and the second part by a social constructionist approach to technology. Rogers' work is critically evaluated and a model of adoption and implementation is distilled from it and applied to a set of empirical case studies. In the light of the case study data, strengths and weaknesses of the model are identified. It is argued that the model is too rational and linear to provide an adequate explanation of adoption processes. It is useful for understanding processes of implementation but requires further development. The model is not able to adequately encompass complex computer based technologies. However, the idea of 'reinvention' is identified as Roger's key concept but it needs to be conceptually extended. Both Roger's model and definition of CAPM found in the literature from production engineering tend to treat CAPM in objectivist terms. The problems with this view are addressed through a review of the literature on the sociology of technology, and it is argued that a social constructionist approach offers a more useful framework for understanding CAPM, its nature, adoption, implementation, and use. CAPM it is argued, must be understood on terms of the ways in which it is constituted in discourse, as part of a 'struggle for meaning' on the part of academics, professional engineers, suppliers, and users.

An investigation of the dynamic characteristics of a bolted-rotor system

A Jeffcott rotor consists of a disc at the centre of an axle supported at its end by bearings. A bolted Jeffcott rotor is formed by two discs, each with a shaft on one side. The discs are held together by spring loaded bolts near the outer edge. When the rotor turns there is tendency for the discs to separate on one side. This effect is more marked if the rotor is unbalanced, especially at resonance speeds. The equations of motion of the system have been developed with four degrees of freedom to include the rotor and bearing movements in the respective axes. These equations which include non-linear terms caused by the rotor opening, are subjected to external force such from rotor imbalance. A simulation model based on these equations was created using SIMULINK. An experimental test rig was used to characterise the dynamic features. Rotor discs open at a lateral displacement of the rotor of 0.8 mm. This is the threshold value used to show the change of stiffness from high stiffness to low stiffness. The experimental results, which measure the vibration amplitude of the rotor, show the dynamic behaviour of the bolted rotor due to imbalance. Close agreement of the experimental and theoretical results from time histories, waterfall plots, pseudo-phase plots and rotor orbit plot, indicated the validity of the model and existence of the non-linear jump phenomenon.

An investigation of the retail marketing mix and its effectiveness in small shops

The recent history of small shop and independent retailing has been one of decline. The most desirable form of assistance is the provision of information which will increase the efficiency model of marketing mix effeciveness which may be applied in small scale retailing. A further aim is to enhance theoretical development in the marketing field. Recent changes in retailing have affected location, product range, pricing and promotion practices. Although a large number of variables representing aspects of the marketing mix may be identified, it is not possible, on the basis of currently available information, to quantify or rank them according to their effect on sales performance. In designing a suitable study a major issue is that of access to a suitable representative sample of small retailers. The publish nature of the retail activities involved facilitates the use of a novel observation approach to data collection. A cross-sectional survey research design was used focussing on a clustered random sample of greengrocers and gent's fashion outfitters in the West Midlands. Linear multiple regression was the main analytical technique. Powerful regression models were evolved for both types of retailing. For greengrocers the major influences on trade are pedestrian traffic and shelf display space. For gent's outfitters they are centrality-to-other shopping, advertising and shelf display space. The models may be utilised by retailers to determine the relative strength of marketing mix variables. The level of precision is not sufficient to permit cost benefit analysis. Comparison of the findings for the two distinct kinds of business studied suggests an overall model of marketing mix effectiveness might be based on frequency of purchase, homogeneity of the shopping environment, elasticity of demand and bulk characteristics of the good sold by a shop.

Edge coding in human vision: a psychophysical and computational investigation

This thesis presents a study of how edges are detected and encoded by the human visual system. The study begins with theoretical work on the development of a model of edge processing, and includes psychophysical experiments on humans, and computer simulations of these experiments, using the model. The first chapter reviews the literature on edge processing in biological and machine vision, and introduces the mathematical foundations of this area of research. The second chapter gives a formal presentation of a model of edge perception that detects edges and characterizes their blur, contrast and orientation, using Gaussian derivative templates. This model has previously been shown to accurately predict human performance in blur matching tasks with several different types of edge profile. The model provides veridical estimates of the blur and contrast of edges that have a Gaussian integral profile. Since blur and contrast are independent parameters of Gaussian edges, the model predicts that varying one parameter should not affect perception of the other. Psychophysical experiments showed that this prediction is incorrect: reducing the contrast makes an edge look sharper; increasing the blur reduces the perceived contrast. Both of these effects can be explained by introducing a smoothed threshold to one of the processing stages of the model. It is shown that, with this modification,the model can predict the perceived contrast and blur of a number of edge profiles that differ markedly from the ideal Gaussian edge profiles on which the templates are based. With only a few exceptions, the results from all the experiments on blur and contrast perception can be explained reasonably well using one set of parameters for each subject. In the few cases where the model fails, possible extensions to the model are discussed.