Influência do tempo de adição do policarboxilato em pastas de cimento Portland para cimentação de poços petrolíferos

Cement pastes used in cementing oil wells operations are prepared according to the specific characteristics of each well. The physical properties requested for each folder formulation depend on the temperature and pressure of the well to be cemented. The rheological properties of the pulp are important control parameter for efficiency in transportation and positioning the folder during the cementing operation. One of the main types of additive used for the adjustment of rheological properties of cement pastes is the dispersant additive. This work aims to study the influence of variation of the time of addition of the polycarboxylate (0, 5, 10 and 15 minutes) in cement pastes, considering the initial periods of hydration of cement particles as fundamental point for better performance dispersant additive. Pastes were prepared with a density set at 15.6 lb/gal (1.87 g/cm3) and polycarboxylate concentrations ranging from 0.01 gpc to 0.05 gpc circulation temperature (BHCT) of 51°C and static temperature (BHST) of 76 C. The pastes were characterized from a rheological measurements, volume filtered, thickening time and resistance to compression formulations. Also were carried out tests Diffraction X-ray (XRD) and Scanning Electron Microscopy (MEV). The results showed that the addition of policaboxilato after 15 minutes decreased by 70% the values of rheological parameters. According to results of DRX and MEV, the addition of dispersant after 15 minutes did not affect the chemical reactions and subsequent formation of cement hydration products. A study of the economic feasibility to realize the financial benefits of the technique, which can be seen only with the use of the technique in this work to reduce the cost of production of cement paste was carried out, can get up to $ 1015.00 for each folder 100 barrels produced with said formulations.

Influência do tempo de adição do policarboxilato em pastas de cimento Portland para cimentação de poços petrolíferos

Cement pastes used in cementing oil wells operations are prepared according to the specific characteristics of each well. The physical properties requested for each folder formulation depend on the temperature and pressure of the well to be cemented. The rheological properties of the pulp are important control parameter for efficiency in transportation and positioning the folder during the cementing operation. One of the main types of additive used for the adjustment of rheological properties of cement pastes is the dispersant additive. This work aims to study the influence of variation of the time of addition of the polycarboxylate (0, 5, 10 and 15 minutes) in cement pastes, considering the initial periods of hydration of cement particles as fundamental point for better performance dispersant additive. Pastes were prepared with a density set at 15.6 lb/gal (1.87 g/cm3) and polycarboxylate concentrations ranging from 0.01 gpc to 0.05 gpc circulation temperature (BHCT) of 51°C and static temperature (BHST) of 76 C. The pastes were characterized from a rheological measurements, volume filtered, thickening time and resistance to compression formulations. Also were carried out tests Diffraction X-ray (XRD) and Scanning Electron Microscopy (MEV). The results showed that the addition of policaboxilato after 15 minutes decreased by 70% the values of rheological parameters. According to results of DRX and MEV, the addition of dispersant after 15 minutes did not affect the chemical reactions and subsequent formation of cement hydration products. A study of the economic feasibility to realize the financial benefits of the technique, which can be seen only with the use of the technique in this work to reduce the cost of production of cement paste was carried out, can get up to $ 1015.00 for each folder 100 barrels produced with said formulations.

U.S. Highway 20 Corridor Development Study, Report B: Improvement Alternatives, Costs and Traffic, 1992

In February the U.S. 20 Corridor Development Study's Steering Committee met to review Report A. At that meeting the Committee selected seven alternatives to be evaluated from a cost and traffic perspective. This report, Report B, presents the cost and traffic evaluation of these seven alternatives. This Report B and its cost and traffic estimates will be reviewed at the next Steering Committee meeting. At that time it is possible that, based on the traffic and cost estimates, one or more of the alternatives will be eliminated from further consideration. After that meeting the Consultant will initiate the more in-depth analyses, including the economic feasibility

U.S. Highway 20 Corridor Development Study, 1992

This study examines the feasibility of making a major financial investment in the improvement of U.S. 20 between Sioux City and Fort Dodge, Iowa. This 119-mile (191-km) highway segment of U.S. 20 currently includes 97 miles (156 km) of 2-lane highway and 22 miles (35 km) of 4-lane highway (on the west end near Sioux City and a short section near Holstein). This 119-mile (191-km) segment is predominantly rural in nature, and serves a region of Iowa that has not been economically prospering. Local business leaders and residents have long desired major improvements to this highway segment, not only because of the safety and travel efficiency implications, but also because of the belief that the highway, as mainly a two-lane facility, is retarding the corridor area's economic growth and well being. The study was divided into five sequential tasks: (A) Evaluation of Existing U.S. 20; (B) Improvement Alternatives, Costs and Traffic; (C) Screening of Alternative Candidate Improvements; (D) Economic Feasibility Analysis; and (E) Interpretation and Comparisons.

U.S. 63 Corridor Study, 1992

This report describes the U.S. 63 Corridor in terms of its economic and demographic features, the physical characteristics of the existing facility and the traffic it serves. Also, the various improvement alternatives are described and evaluated. These evaluations consider the traffic needs in the time period up to the year 2010, the travel benefits that would derive from alternative improvements to U.S. 63 and the economic development benefits that would be stimulated by such improvements. These benefits are related to the costs of the improvements and various indicators of economic feasibility are provided.

Recherche d’alternatives aux nitrates et nitrites dans les produits carnés

L’objectif principal de cette maîtrise était de développer des formulations d’épices capables de remplacer les nitrites et nitrates dans les produits carnés tout en gardant la même durée de conservation que ces derniers ainsi que leurs propriétés organoleptiques, antibactériennes et antioxydantes. Un criblage qualitatif puis quantitatif des épices a été réalisé et trois épices ont été sélectionnées, les clous de girofle, le cumin et la cannelle. Puis, des poudres de fruits ont été testées pour approcher la couleur rosée que donnent les échantillons contenant les nitrites. L’analyse sensorielle effectuée par la suite a fait ressortir le caractère sucré de la poudre de fruit et des propriétés très intéressantes de certaines formulations par rapport à l’ajout des nitrites. Enfin, une analyse technico-économique a été réalisée et a montré une très faible augmentation du coût de production des produits carnés en utilisant nos formulations d’épices et de poudre de fruit.

Protected cropping for specialty melons in North Queensland

Protective cropping could be an effective system for growing specialty melons in the dry tropics of North Queensland. The growing system could reduce outdoor risks for production loss, improve fruit quality, increase yield per m2, allow production offseason, and used for supplying niche markets in a segment of the larger melon market in Australia. First evaluations in Giru, Queensland, included seven cultivars of fruit types 'Galia', 'Hami', 'Charentais', small 'Canary', and 'Rockmelon', transplanted July 25, 2013 under a high polyethylene-covered tunnel. Plants were grown at a density of 2.8 plants m-2 in containers filled with volcanic rock and irrigated with a complete nutrient solution. Pruning and trellising was done to a single vertical stem, keeping lateral shoots on the main stem after the 7th leaf node. After bearing small fruit, lateral shoots were cut off after their second or third leaf node. To facilitate insect pollination, a screen window in the tunnel was left partially opened. On November 20 the cultivars had combined marketable yields that ranged from 2.8 to 8.2 fruits m-2 and 3.1 to 7.8 kg m-2. Total soluble solids levels in fruit ranged from 6 to 13 °Brix. Cultivars 'Tempo' ('Galia'), 'Tikal' ('Canary') and 'Sultan' ('Charentais') had fruit yields that were up to 2.6 times greater than yields commonly achieved with field-grown rockmelon crops. Sugar levels in fruits and marketable yields may be increased with changes in fertigation management. Promising results in this first evaluation justify examination of a greater number of genetic materials, in addition to the development of economic feasibility studies and further adaptive research to refine crop recommendations for growing melons in protective cropping systems.

Influência do lodo de ETE na massa para fabricação de cerâmica vermelha

The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pollution resulting from inappropriate management of residues. Thus, is necessary achieve a new equilibrium between the grow from raw materials and energy and the residue generation. This equilibrium should be achieved by technical and economic feasibility of environmental supported models through recycling and reuse. The red ceramic industry stand out in residue absorption question as raw material due their clay mass heterogeneity, constituted by clay minerals and non-clay minerals with wide mineralogical variation, allowing residue inclusion which act like plastic or non-plastic materials, contributing to retain heavy metals contained in residues in the vitreous mass formed during the burning of the ceramic bodies. This work propose the study of the influence of incorporation of 25 wt.% sludge from wastewater treatment plant, according preliminary results, in the mass to produce ceramic bodies. The raw materials was characterized through chemical composition analyses by XRF, mineralogical analyses by XRD, thermal analyses by TG and DTA, Atterberg limits and thermodilatometry. Subsequently was composed the mass with 75 wt.% of clay and 25 wt.% of dried wastewater sludge from UFRN WWTP. Samples with 6,0 x 2,0 x 0,5 cm was produced with unidirectional compacting under pressure of 20MPa and burned in temperatures between 950 and 1,200ºC. After fired, the ceramic bodies have been submitted to physical and mechanical analyses through the measure of firing shrinkage, water absorption, density, apparent porosity and flexural strength; crystallographic analyses through XRD and microstructure analyses by SEM. The technological properties obtained was satisfactory to production of roof tiles with 25 wt.% at 1,200 ºC, but the production of others products at lower temperatures was not feasible

Comunidades energéticas sustentáveis: estudo de Implementação de uma comunidade eólica no Algarve

Tese de Doutoramento, Gestão da Inovação e do Território, Faculdade de Economia, Universidade do Algarve, 2016

Estudo da viabilidade econômica em campos maduros

When it comes to oil and gas in Brazil is almost certain that we are referring to activities in deep waters off the coast of Campos, Rio de Janeiro, the main field of action of PETROBRAS and a small number of multinational oil companies . Since the Law 9.478/97 allows, by means of concessions, that other companies other than Petrobras, to explore and produce oil and gas domestically. Soon it moved, then the private companies that want small and medium-sized businesses to invest in such activities, forming a segment of independent producers, as occurs in other countries. In this context, this work aims at making an economic feasibility study, is currently analyzing how this thread and focus on the factors that contribute to its development as well as those that constitute barriers. To this end, we conducted a survey examining some mature fields that are in production in order to capture cost information in the phases of project, operation and abandonment. The work also presents an analysis of the results obtained in the survey, identifying the costs higher. With the results obtained through the study used economic engineering tools such as NPV and IRR, using a variety of design scenarios, to study the economic viability of these fields. In scenario 4 was set a production of 4.0 m³ / d of oil, which is an expected average production for several of these fields, whose minimum value of a barrel of oil, to enable this field, was $ 55.00, this value well below what was being practiced in the market today.

Análise de Sustentabilidade em Projetos de Instalações de Produção de Petróleo

A proposal for a global analysis of sustainability in projects related in oil facilities is presented. By considering economic, environmental and social aspects in the early stages of design, the suggested method is more comprehensive and can be used to complement the analysis commonly applied in the petroleum industry, such as: Study of Technical and Economic Feasibility; Environmental Impact Assessment and Risk Analysis. Several authors, associations, certification bodies and oil companies suggest different approaches to study sustainability in some specific activities (or industries). In this study, a checklist of significant sustainability aspects for the oil industry (surface facilities) was assembled. In addition, a matrix was developed to assess the sustainability items relevant to these projects. In this work, the checklist interacts with the matrix to perform a "Preliminary Analysis of Sustainability of the Enterprise" (APSE). This method allows the identification of aspects that contribute significantly to global sustainability. From this analysis, which includes economic, social and environmental aspects, is built a report that is used to analyze qualitatively and quantitatively the impact of the sustainability aspects of the project. In this analysis are identified items that strongly influence the economic, social or environmental aspects and evaluated alternatives that can increase the overall sustainability of the project. Finally, the alternatives that can be used to indicate the most sustainable option are identified. This method was applied in a project (design) of a small offshore platform. This case study shows how the APSE can contribute to the identification of sustainability initiatives for the enterprise. The results showed that relevant aspects can contribute decisively to global sustainability. Finally, it was observed that the proposed method can contribute to increased rates of sustainability, even after application of analysis commonly used in these projects

Exchange, know-hows, and interpersonal segmentation : an assessment of the archaic component of the Gaudreau (BkEu-8) site, Weedon, Quebec

Le site Gaudreau est un site perturbé et à occupations multiples situé dans le sud-est du Québec, et présente des occupations datant du Paléoindien Récent jusqu’à la période historique. Les occupations Archaïques du site, noté par la présence de bifaces diagnostiques de l’Archaïque Supérieur et de l’Archaïque Terminal et par des Macrooutils de l’Archaïque Moyen et de l’Archaïque Supérieur, sont le sujet principal de ce mémoire. Puisqu’aucune occupation ne peut être différencié horizontalement ni verticalement, et qu’aucun objet non-diagnostique ne peut être associé avec certitude, seul un échantillon de 32 objets ont été observés. Étant donné la faible taille de l’échantillon analysé, il est fort probable qu’un plus grand nombre de sources de matières premières aient été utilisés durant les occupations de l’Archaïque. Toutefois, un réseau de matières premières lithiques similaire à ceux des sites du Lac Mégantic a été observé, avec une forte représentation de la rhyolite Kineo-Traveller et des cherts Appalachiens. Des cherts des Grands Lacs et le quartzite de Cheshire sont aussi présents. Le mudstone silicifié d’origine locale et le quartz sont par contre faiblement représentés dans l’échantillon, probablement dû à un biais de proximité de source. L’analyse technique de l’échantillon, sans contrôle pour les pratiques techno-économiques, dénote plusieurs récurrences techniques à l’intérieur des unités typologiques, sans toutefois appuyer des différences récurrentes significatives entre les matières premières de régions différentes. À cause de la taille de l’échantillon et du contexte perturbé, la pertinence des fortes similarités entre certains objets est douteuse. La segmentation interpersonnelle des chaînes opératoires ne pouvait être déterminée dans l’échantillon. Cependant, les résultats incitent plutôt à croire que les matières premières devaient circuler sous diverses formes. Il peut être considéré que, en dehors des matières premières locales, les occupants Archaïques du site Gaudreau n’avaient pas d’accès direct aux matières premières exogènes.

Exchange, know-hows, and interpersonal segmentation : an assessment of the archaic component of the Gaudreau (BkEu-8) site, Weedon, Quebec

Le site Gaudreau est un site perturbé et à occupations multiples situé dans le sud-est du Québec, et présente des occupations datant du Paléoindien Récent jusqu’à la période historique. Les occupations Archaïques du site, noté par la présence de bifaces diagnostiques de l’Archaïque Supérieur et de l’Archaïque Terminal et par des Macrooutils de l’Archaïque Moyen et de l’Archaïque Supérieur, sont le sujet principal de ce mémoire. Puisqu’aucune occupation ne peut être différencié horizontalement ni verticalement, et qu’aucun objet non-diagnostique ne peut être associé avec certitude, seul un échantillon de 32 objets ont été observés. Étant donné la faible taille de l’échantillon analysé, il est fort probable qu’un plus grand nombre de sources de matières premières aient été utilisés durant les occupations de l’Archaïque. Toutefois, un réseau de matières premières lithiques similaire à ceux des sites du Lac Mégantic a été observé, avec une forte représentation de la rhyolite Kineo-Traveller et des cherts Appalachiens. Des cherts des Grands Lacs et le quartzite de Cheshire sont aussi présents. Le mudstone silicifié d’origine locale et le quartz sont par contre faiblement représentés dans l’échantillon, probablement dû à un biais de proximité de source. L’analyse technique de l’échantillon, sans contrôle pour les pratiques techno-économiques, dénote plusieurs récurrences techniques à l’intérieur des unités typologiques, sans toutefois appuyer des différences récurrentes significatives entre les matières premières de régions différentes. À cause de la taille de l’échantillon et du contexte perturbé, la pertinence des fortes similarités entre certains objets est douteuse. La segmentation interpersonnelle des chaînes opératoires ne pouvait être déterminée dans l’échantillon. Cependant, les résultats incitent plutôt à croire que les matières premières devaient circuler sous diverses formes. Il peut être considéré que, en dehors des matières premières locales, les occupants Archaïques du site Gaudreau n’avaient pas d’accès direct aux matières premières exogènes.

Modeling the Aesthetic Axis of Information Organization Frameworks, Part 1: Theoretical Basis

Purpose – The purpose of this paper is to propose a theoretical framework, based on contemporary philosophical aesthetics, from which principled assessments of the aesthetic value of information organization frameworks may be conducted.Design/methodology/approach – This paper identifies appropriate discourses within the field of philosophical aesthetics, constructs from them a framework for assessing aesthetic properties of information organization frameworks. This framework is then applied in two case studies examining the Library of Congress Subject Headings (LCSH), and Sexual Nomenclature: A Thesaurus. Findings – In both information organization frameworks studied, the aesthetic analysis was useful in identifying judgments of the frameworks as aesthetic judgments, in promoting discovery of further areas of aesthetic judgments, and in prompting reflection on the nature of these aesthetic judgments. Research limitations/implications – This study provides proof-of-concept for the aesthetic evaluation of information organization frameworks. Areas of future research are identified as the role of cultural relativism in such aesthetic evaluation and identification of appropriate aesthetic properties of information organization frameworks.Practical implications – By identifying a subset of judgments of information organization frameworks as aesthetic judgments, aesthetic evaluation of such frameworks can be made explicit and principled. Aesthetic judgments can be separated from questions of economic feasibility, functional requirements, and user-orientation. Design and maintenance of information organization frameworks can be based on these principles.Originality/value – This study introduces a new evaluative axis for information organization frameworks based on philosophical aesthetics. By improving the evaluation of such novel frameworks, design and maintenance can be guided by these principles.Keywords Evaluation, Research methods, Analysis, Bibliographic systems, Indexes, Retrieval languages

Modeling the Aesthetic Axis of Information Organization Frameworks, Part 2: Case Studies

Purpose – The purpose of this paper is to propose a theoretical framework, based on contemporary philosophical aesthetics, from which principled assessments of the aesthetic value of information organization frameworks may be conducted.Design/methodology/approach – This paper identifies appropriate discourses within the field of philosophical aesthetics, constructs from them a framework for assessing aesthetic properties of information organization frameworks. This framework is then applied in two case studies examining the Library of Congress Subject Headings (LCSH), and Sexual Nomenclature: A Thesaurus. Findings – In both information organization frameworks studied, the aesthetic analysis was useful in identifying judgments of the frameworks as aesthetic judgments, in promoting discovery of further areas of aesthetic judgments, and in prompting reflection on the nature of these aesthetic judgments. Research limitations/implications – This study provides proof-of-concept for the aesthetic evaluation of information organization frameworks. Areas of future research are identified as the role of cultural relativism in such aesthetic evaluation and identification of appropriate aesthetic properties of information organization frameworks.Practical implications – By identifying a subset of judgments of information organization frameworks as aesthetic judgments, aesthetic evaluation of such frameworks can be made explicit and principled. Aesthetic judgments can be separated from questions of economic feasibility, functional requirements, and user-orientation. Design and maintenance of information organization frameworks can be based on these principles.Originality/value – This study introduces a new evaluative axis for information organization frameworks based on philosophical aesthetics. By improving the evaluation of such novel frameworks, design and maintenance can be guided by these principles.Keywords Evaluation, Analysis, Bibliographic systems, Indexes, Retrieval languages, Philosophy