Neoadjuvant chemotherapy and extrapleural pneumonectomy (EPP) of malignant pleural mesothelioma (MPM) with or without hemithoracic radiotherapy: final results of the randomized multicenter phase II trial SAKK17/04.

Aim: We have previously documented the feasibility of neoadjuvant chemotherapy and EPP in a multicenter trial of MPM (Weder, Ann Oncol 18: 1196, 2007). The objectives of the trimodality trial SAKK17/04 (NCT00334594) were to evaluate the time to loco-regional relapse with or without high dose hemithoracic radiotherapy in a prospective multicenter randomized phase II trial in patients with R0 and R1 resection after neoadjuvant chemotherapy and EPP. Methods: Eligible patients had pathologically confirmed MPM, surgically resectable TNM stage (T1-3 N0-2 M0), PS0-1, ages 18-70 years. Part 1 had a phase II design, and included neoadjuvant chemotherapy with 3 cycles of cisplatin and pemetrexed, followed by restaging and EPP. The primary endpoint of part 1 was complete macroscopic resection (R0-1). Part 2 randomized consenting patients with R0-1 resection into two parallel phase II arms (control arm A and radiotherapy arm B). The primary endpoint for part 2 was loco-regional relapse-free survival (RFS). To detect a 1 year increase with 80% power and 10% alpha, 37 patients were needed for arm B. Secondary endpoints included operability, tolerability of chemotherapy and radiotherapy, survival, and translational research Results: Because accrual of part 2 was slower than planned, the trial was stopped in 2013. Overall, 153 patients entered the trial, of whom 125 underwent surgery and 99 had a complete macroscopic resection (primary endpoint part 1). Of the later patients, 54 could be randomized 1:1 into each arm. Reasons for non-randomization included patient refusal in 24 and ineligibility or protocol deviations in 21. Of the 27 patients randomized to hemithoracic radiotherapy, 25 completed the treatment as planned. For part 1 the median RFS was 8.8 (95%CI: 7.3-10.7) and median OS was 15.0 (95% CI: 12.1-19.3) months. For part 2 the median local RFS for group A was 7.6 (95%CI: 5.5-10.7) and for group B 9.4 (95%CI: 6.5-11.9) months (primary endpoint part 2), while the overall RFS and OS for group A were 5.7 (95%CI: 3.5-8.8) and 16.9 (95%CI: 10.7-23.6) months and for group B 7.6 (95% CI:5.2-10.6) and 14.9 (95%CI: 7.0-17.6) months. Conclusions: This study did not reach the primary endpoint which was defined as one-year increase in loco-regional relapse-free survival and thus does not support the routine use of hemithoracic RT after neoadjuvant chemotherapy and EPP. Disclosure: All authors have declared no conflicts of interest.

Methods for assessing the sustainability of integrated municipal waste management and

The general striving to bring down the number of municipal landfills and to increase the reuse and recycling of waste-derived materials across the EU supports the debates concerning the feasibility and rationality of waste management systems. Substantial decrease in the volume and mass of landfill-disposed waste flows can be achieved by directing suitable waste fractions to energy recovery. Global fossil energy supplies are becoming more and more valuable and expensive energy sources for the mankind, and efforts to save fossil fuels have been made. Waste-derived fuels offer one potential partial solution to two different problems. First, waste that cannot be feasibly re-used or recycled is utilized in the energy conversion process according to EU’s Waste Hierarchy. Second, fossil fuels can be saved for other purposes than energy, mainly as transport fuels. This thesis presents the principles of assessing the most sustainable system solution for an integrated municipal waste management and energy system. The assessment process includes: · formation of a SISMan (Simple Integrated System Management) model of an integrated system including mass, energy and financial flows, and · formation of a MEFLO (Mass, Energy, Financial, Legislational, Other decisionsupport data) decision matrix according to the selected decision criteria, including essential and optional decision criteria. The methods are described and theoretical examples of the utilization of the methods are presented in the thesis. The assessment process involves the selection of different system alternatives (process alternatives for treatment of different waste fractions) and comparison between the alternatives. The first of the two novelty values of the utilization of the presented methods is the perspective selected for the formation of the SISMan model. Normally waste management and energy systems are operated separately according to the targets and principles set for each system. In the thesis the waste management and energy supply systems are considered as one larger integrated system with one primary target of serving the customers, i.e. citizens, as efficiently as possible in the spirit of sustainable development, including the following requirements: · reasonable overall costs, including waste management costs and energy costs; · minimum environmental burdens caused by the integrated waste management and energy system, taking into account the requirement above; and · social acceptance of the selected waste treatment and energy production methods. The integrated waste management and energy system is described by forming a SISMan model including three different flows of the system: energy, mass and financial flows. By defining the three types of flows for an integrated system, the selected factor results needed in the decision-making process of the selection of waste management treatment processes for different waste fractions can be calculated. The model and its results form a transparent description of the integrated system under discussion. The MEFLO decision matrix has been formed from the results of the SISMan model, combined with additional data, including e.g. environmental restrictions and regional aspects. System alternatives which do not meet the requirements set by legislation can be deleted from the comparisons before any closer numerical considerations. The second novelty value of this thesis is the three-level ranking method for combining the factor results of the MEFLO decision matrix. As a result of the MEFLO decision matrix, a transparent ranking of different system alternatives, including selection of treatment processes for different waste fractions, is achieved. SISMan and MEFLO are methods meant to be utilized in municipal decision-making processes concerning waste management and energy supply as simple, transparent and easyto- understand tools. The methods can be utilized in the assessment of existing systems, and particularly in the planning processes of future regional integrated systems. The principles of SISMan and MEFLO can be utilized also in other environments, where synergies of integrating two (or more) systems can be obtained. The SISMan flow model and the MEFLO decision matrix can be formed with or without any applicable commercial or free-of-charge tool/software. SISMan and MEFLO are not bound to any libraries or data-bases including process information, such as different emission data libraries utilized in life cycle assessments.

Costs and Benefits of a Shared Digital Long-Term Preservation System

Paper presented at the 40th Annual Conference of LIBER (Ligue des Bibliothèques Européennes de Recherche - Association of European Research Libraries) on July 1st, 2011; with the slides used at the presentation.

Costs and Benefits of a Shared Digital Long-Term Preservation System

This paper describes the cost-benefit analysis of digital long-term preservation (LTP) that was carried out in the context of the Finnish National Digital Library Project (NDL) in 2010. The analysis was based on the assumption that as many as 200 archives, libraries, and museums will share an LTP system. The term ‘system’ shall be understood as encompassing not only information technology, but also human resources, organizational structures, policies and funding mechanisms. The cost analysis shows that an LTP system will incur, over the first 12 years, cumulative costs of €42 million, i.e. an average of €3.5 million per annum. Human resources and investments in information technology are the major cost factors. After the initial stages, the analysis predicts annual costs of circa €4 million. The analysis compared scenarios with and without a shared LTP system. The results indicate that a shared system will have remarkable benefits. At the development and implementation stages, a shared system shows an advantage of €30 million against the alternative scenario consisting of five independent LTP solutions. During the later stages, the advantage is estimated at €10 million per annum. The cumulative cost benefit over the first 12 years would amount to circa €100 million.

Sewage Sludge Electro-Dewatering

Original sludge from wastewater treatment plants (WWTPs) usually has a poor dewaterability. Conventionally, mechanical dewatering methods are used to increase the dry solids (DS) content of the sludge. However, sludge dewatering is an important economic factor in the operation of WWTPs, high water content in the final sludge cake is commonly related to an increase in transport and disposal costs. Electro‐dewatering could be a potential technique to reduce the water content of the final sludge cake, but the parameters affecting the performance of electro‐dewatering and the quality of the resulting sludge cake, as well as removed water, are not sufficiently well known. In this research, non‐pressure and pressure‐driven experiments were set up to investigate the effect of various parameters and experimental strategies on electro‐dewatering. Migration behaviour of organic compounds and metals was also studied. Application of electrical field significantly improved the dewatering performance in comparison to experiments without electric field. Electro‐dewatering increased the DS content of the sludge from 15% to 40 % in non‐pressure applications and from 8% to 41% in pressure‐driven applications. DS contents were significantly higher than typically obtained with mechanical dewatering techniques in wastewater treatment plant. The better performance of the pressure‐driven dewatering was associated to a higher current density at the beginning and higher electric field strength later on in the experiments. The applied voltage was one of the major parameters affecting dewatering time, water removal rate and DS content of the sludge cake. By decreasing the sludge loading rate, higher electrical field strength was established between the electrodes, which has a positive effect on an increase in DS content of the final sludge cake. However interrupted voltage application had anegative impact on dewatering in this study, probably because the off‐times were too long. Other factors affecting dewatering performance were associated to the original sludge characteristics and sludge conditioning. Anaerobic digestion of the sludge with high pH buffering capacity, polymer addition and freeze/thaw conditioning had a positive impact on dewatering. The impact of pH on electro‐dewatering was related to the surface charge of the particles measured as zeta‐potential. One of the differences between electro‐dewatering and mechanical dewatering technologies is that electro‐dewatering actively removes ionic compounds from the sludge. In this study, dissolution and migration of organic compounds (such as shortchain fatty acids), macro metals (Na, K, Ca, Mg, Fe) and trace metals (Ni, Mn, Zn, Cr) was investigated. The migration of the metals depended on the fractionation and electrical field strength. These compounds may have both negative and positive impacts on the reuse and recycling of the sludge and removed water. Based on the experimental results of this study, electro‐dewatering process can be optimized in terms of dewatering time, desired DS content, power consumption and chemical usage.

Biopolttoaineen rinnakkaispolton kannattavuustarkastelu hiilipölypolttokattilassa Martinlaakso 2:ssa

Euroopan unionin asettamat tavoitteet kasvihuonepäästöjen vähennykselle johtavat vih-reämpään teknologiaan. Tämä diplomityö on teoreettinen tutkimus, joka käsittelee biopolt-toaineen rinnakkaispolton kannattavuutta Vantaan Energian Martinlaakso 2:sen hiilipöly-polttokattilassa. Työssä perehdytään viiteen eri biopolttoainevaihtoehtoon, joita tarkastellaan viidessä eri skenaariossa, jotka vastaavat: 10, 20, 30, 40 ja 50 % biopolttoaineen osuutta kattilassa tuo-tetusta energiasta. Skenaarioissa on pohdittu tarvittavia investointikustannuksia ja muutos-töitä hiilipölypolttokattilassa. Tutkimuksessa on huomioitu myös uusi isojen laitosten pääs-töjä koskeva direktiivi, kattilan oletettava käyttöikä sekä biopolttoaineiden tuet. Saaduista arvioista on lopuksi laskettu vuosittainen polttoainekohtainen kustannusarvio ja investoin-nin kannattavuusarvio. Tuloksista voidaan päätellä, että sahanpurun mahdollisimman suuri hyötykäyttö on kannat-tavaa. Mikäli halutaan käyttää suuria määriä biopolttoainetta, (yli 20 % tuotetusta energias-ta) ei sahanpuru ole varteenotettava vaihtoehto huonon saatavuutensa johdosta. Tällöin hakkeen kaasutuslaitos olisi paras ratkaisu, mutta laitoksen kannattavuus riippuu tulevista energiatuista. Ilman energiatukia sahanpurun hyötykäyttö on ainoa kannattava investointi.

Single access laparoscopic cholecystectomy: technique without the need for special materials and with better ergonomics

The authors describe a surgical technique which allows, without increasing costs, to perform laparoscopic cholecystectomy with a single incision, without using specific materials and with better surgical ergonomics. The technique consists of a longitudinal umbilical incision, navel detachment, use of a permanent 10mm trocar and two clamps directly and bilaterally through the aponeurosis without the use of 5mm trocars, transcutaneous gallbladder repair with straight needle cotton suture, ligation with unabsorbable suture and umbilical incision for the specimen extraction. The presented technique enables the procedure with conventional and permanent materials, improving surgical ergonomics, with safety and aesthetic advantages.

Two-Photon Excited Fluorescence Detection Technology in Screening for Methicillin-Resistant Staphylococcus aureus

Control of the world-wide spread of methicillin-resistant Staphylococcus aureus (MRSA) has been unsuccessful in most developed countries. A few countries have been able to maintain a low MRSA prevalence, plausibly due to their strict MRSA control policies. Such policies require wide-scale screening of patients with suspected MRSA colonization, in order to nurse the MRSA-positive patients in contact isolation. The aim of this study was to develop and introduce a 2-photon excited fluorescence detection (TPX) technique for screening of MRSA directly from clinical samples. The assay principle involves specific online immunometric monitoring of S. aureus growth under selective antibiotic pressure. After the novel TPX approach had been set up, its applicability for the detection of MRSA was evaluated using a large MRSA collection including practically all epidemic MRSA strains identified in Finland between 1991 and 2009. The TPX assay was found both sensitive (97.9%) and specific (94.1%) in this epidemiological setting, illustrating that the method is tolerant to wide biological variation as well as to environments with rapidly emerging MRSA strains. When MRSA was screened directly from colonization samples, all patients positive for MRSA by conventional methods were positive also by the TPX assay. The assay capacity was 48 samples per a test run, and the median time required for confirmation of a true-positive screening test result was 3 h 26 min. Collectively, the findings presented in this thesis suggest that the TPX MRSA screening assay could be applicable for direct screening of MRSA colonization samples without any prior steps of isolation. This can potentially mean that contact isolation of suspected carriers testing negative could be discontinued earlier, thereby reducing the costs and burden associated with the containment of MRSA. In case of infection, a positive test result would ensure an early onset of effective therapy.

Porin seudun liikenneturvallisuussuunnitelma

Porin seudulle laadittiin liikenneturvallisuussuunnitelma Harjavallan, Huittisen, Kokemäen, Luvian, Merikarvian, Nakkilan, Pomarkun, Porin ja Ulvilan kuntien alueelle. Suunnitelmat laadittiin kuntien ja Varsinais-Suomen ELY-keskuksen yhteistyönä. Suunnitelma sisältää turvallisuuden parantamisen lisäksi kestävien liikkumismuotojen edistämistä. Seudun liikenneturvallisuuden ja liikkumisen ongelmia kartoitettiin kaikille kuntalaisille suunnatuilla kyselyillä, onnettomuusanalyysillä sekä maastokäynneillä. Onnettomuusanalyysin perusteella seudun liikenneturvallisuuden tila Porin seudulla on koko maan keskiarvoa heikompi. Vuosittain kuolee noin 10 henkilöä ja loukkaantuu noin 220 henkilöä. Seudulla tapahtuneista onnettomuuksista aiheutuu kustannuksia vuosittain keskimäärin noin 90 miljoonaa euroa, josta kuntien osuus on vuosittain noin 16 miljoonaa euroa. Kyselyn vastauksista ilmeni, että vastaajia huolestutti muun muassa jalankulku- ja pyöräväylien kunto ja esteettömyys sekä talvikunnossapidon taso. Autoilun olosuhteissa tyytymättömyyttä aiheutti teiden kunto ja kunnossapidon taso sekä kouluympäristöjen liikennejärjestelyt. Kyselyyn vastanneista 64 %:lla työ- tai koulumatkan pituus on korkeintaan 5 kilometriä, joten kävelyn ja pyöräilyn edistämisellä seudulla on hyvät edellytykset. Ongelma-analyysin sekä valtakunnallisten tavoitteiden pohjalta seudulle määritettiin liikenneturvallisuustavoitteet. Pitkän aikavälin liikenneturvallisuusvisioksi seudulle asetettiin, että kenenkään ei tarvitse kuolla tai loukkaantua vakavasti liikenteessä ja liikkuminen on vastuullista ja se koetaan turvalliseksi. Määrällisenä tavoitteena on, että nykyisestä 10 keskimäärin vuodessa kuolleesta seudulla kuolisi liikenteessä enintään 6 henkilöä (40 henkilöä / miljoona asukasta) vuonna 2014 ja enintään 3 henkilöä (24 henkilöä / miljoona asukasta) vuonna 2020. Loukkaantuneiden määrän tavoitteena on, että nykyisestä 218 henkilöstä vähennystä olisi 25 % (korkeintaan 163 henkilöä) vuoteen 2020 mennessä. Nuorten onnettomuusriskiä halutaan pienentää 25 % vuoteen 2020 mennessä siten, että heidän riskinsä lähenee muun väestön onnettomuusriskin tasoa. Liikenneympäristön parantamisehdotukset tehtiin noin 300 kohteeseen seudulla. Toimenpiteiden toteuttaminen vaiheistettiin kolmeen ohjeelliseen kiireellisyysluokkaan. Suunnitelmatyön aikana kuntien liikenneturvallisuustyötä aktivoitiin ja perustettiin uudet ryhmät niihin kuntiin, joista ryhmät puuttuivat. Hallintokuntatilaisuuksissa ideoitiin ja käsiteltiin eri liikkujaryhmille sopivia toimintamuotoja liikenneturvallisuuden ja kestävän liikkumisen edistämiseksi. Lisäksi muodostettiin seudullinen liikenneturvallisuusryhmä, joka seuraa ja koordinoi liikenneturvallisuustyötä tulevaisuudessa.

Container logistic innovations in forest-energy sector: Markets, future service concepts and technical improvements

The report presents the results of the commercialization project called the Container logistic services for forest bioenergy. The project promotes new business that is emerging around overall container logistic services in the bioenergy sector. The results assess the European markets of the container logistics for biomass, enablers for new business creation and required service bundles for the concept. We also demonstrate the customer value of the container logistic services for different market segments. The concept analysis is based on concept mapping, quality function deployment process (QFD) and business network analysis. The business network analysis assesses key shareholders and their mutual connections. The performance of the roadside chipping chain is analysed by the logistic cost simulation, RFID system demonstration and freezing tests. The EU has set the renewable energy target to 20 % in 2020 of which Biomass could account for two-thirds. In the Europe, the production of wood fuels was 132.9 million solid-m3 in 2012 and production of wood chips and particles was 69.0 million solidm3. The wood-based chips and particle flows are suitable for container transportation providing market of 180.6 million loose- m3 which mean 4.5 million container loads per year. The intermodal logistics of trucks and trains are promising for the composite containers because the biomass does not freeze onto the inner surfaces in the unloading situations. The overall service concept includes several packages: container rental, container maintenance, terminal services, RFID-tracking service, and simulation and ERP-integration service. The container rental and maintenance would provide transportation entrepreneurs a way to increase the capacity without high investment costs. The RFID-concept would lead to better work planning improving profitability throughout the logistic chain and simulation supports fuel supply optimization.

Predicting variety composite means without diallel crossing

Prediction of variety composite means was shown to be feasible without diallel crossing the parental varieties. Thus, the predicted mean for a quantitative trait of a composite is given by: Yk = a1 sigmaVj + a2sigmaTj + a3 - a4, with coefficients a1 = (n - 2k)/k²(n - 2); a2 = 2n(k - 1)/k²(n - 2); a3 = n(k - 1)/k(n - 1)(n - 2); and a4 = n²(k - 1)/k(n - 1)(n - 2); summation is for j = 1 to k, where k is the size of the composite (number of parental varieties of a particular composite) and n is the total number of parent varieties. Vj is the mean of varieties and Tj is the mean of topcrosses (pool of varieties as tester), and and are the respective average values in the whole set. Yield data from a 7 x 7 variety diallel cross were used for the variety means and for the "simulated" topcross means to illustrate the proposed procedure. The proposed prediction procedure was as effective as the prediction based on Yk = - ( -)/k, where and refer to the mean of hybrids (F1) and parental varieties, respectively, in a variety diallel cross. It was also shown in the analysis of variance that the total sum of squares due to treatments (varieties and topcrosses) can be orthogonally partitioned following the reduced model Yjj’ = mu + ½(v j + v j’) + + h j+ h j’, thus making possible an F test for varieties, average heterosis and variety heterosis. Least square estimates of these effects are also given

Thick Section Laser Beam Welding of Structural Steels: Methods for Improving Welding Efficiency

Laser beam welding (LBW) is applicable for a wide range of industrial sectors and has a history of fifty years. However, it is considered an unusual method with applications typically limited to welding of thin sheet metal. With a new generation of high power lasers there has been a renewed interest in thick section LBW (also known as keyhole laser welding). There was a growing body of publications during 2001-2011 that indicates an increasing interest in laser welding for many industrial applications, and in last ten years, an increasing number of studies have examined the ways to increase the efficiency of the process. Expanding the thickness range and efficiency of LBW makes the process a possibility for industrial applications dealing with thick metal welding: shipbuilding, offshore structures, pipelines, power plants and other industries. The advantages provided by LBW, such as high process speed, high productivity, and low heat input, may revolutionize these industries and significantly reduce the process costs. The research to date has focused on either increasing the efficiency via optimizing process parameters, or on the process fundamentals, rather than on process and workpiece modifications. The argument of this thesis is that the efficiency of the laser beam process can be increased in a straightforward way in the workshop conditions. Throughout this dissertation, the term “efficiency” is used to refer to welding process efficiency, specifically, an increase in efficiency refers an increase in weld’s penetration depth without increasing laser power level or decreasing welding speed. These methods are: modifications of the workpiece – edge surface roughness and air gap between the joining plates; modification of the ambient conditions – local reduction of the pressure in the welding zone; modification of the welding process – preheating of the welding zone. Approaches to improve the efficiency are analyzed and compared both separately and combined. These experimentally proven methods confirm previous findings and contribute additional evidence which expand the opportunities for laser beam welding applications. The focus of this research was primarily on the effects of edge surface roughness preparation and pre-set air gap between the plates on weld quality and penetration depth. To date, there has been no reliable evidence that such modifications of the workpiece give a positive effect on the welding efficiency. Other methods were tested in combination with the two methods mentioned above. The most promising - combining with reduced pressure method - resulted in at least 100% increase in efficiency. The results of this thesis support the idea that joining those methods in one modified process will provide the modern engineering with a sufficient tool for many novel applications with potential benefits to a range of industries.

Política industrial e compromissos críveis: uma proposta de análise e de ação governamental

This paper analyses the question of the counterparts that governments should claim from firms and/or economic sectors supported by vertical industrial policy. This is a discussion that still have to advance because everything indicate that the set of current counterparts (goals of costs, productivity, exportation, etc.) still may be increased and improved, what will facilitate the assessment of industrial policy execution by society and the verification of its efficacy in order to yielding more possibilities of economic growth for a country or region. To reinforce the commitment credibility of the agents supported by industrial policy, this paper proposes to maintain the counterparts meant before and that such agents will be stimulated to commit specific assets in their activities that are supported by govern. It is shown that, without use more public resources than the used currently, this new counterpart may reinforce substantially the incentives that the firms supported by vertical industrial policy have it to execute the traditional counterparts assumed by them, and with it guarantee the best possible use of public resources.

The effects of plants(Typha Latifolia)and root-bed medium on the treatment of domestic sewage within a vertical flow constructed wetland /

The effect that plants {Typha latifolia) as well as root-bed medium physical and chemical characteristics have on the treatment of primary treated domestic wastewater within a vertical flow constructed wetland system was investigated. Five sets of cells, with two cells in each set, were used. Each cell was made of concrete and measured 1 .0 m X 1 .0 m and was 1.3 m deep. Four different root-bed media were tested : Queenston Shale, Fonthill Sand, Niagara Shale and a Michigan Sand. Four of the sets contained plants and a single type of root-bed medium. The influence of plants was tested by operating a Queenston Shale set without plants. Due to budget constraints no replicates were constructed. All of the sets were operated independently and identically for twenty-eight months. Twelve months of data are presented here, collected after 16 months of continuous operation. Root-bed medium type did not influence BOD5 removal. All of the sets consistently met Ontario Ministry of Environment (MOE) requirements (<25 mg/L) for BOD5 throughout the year. The 12 month average BOD5 concentration from all sets with plants was below 2.36 mg/L. All of the sets were within MOE discharge requirements (< 25 mg/L) for suspended solids with set effluent concentrations ranging from 1.53 to 14.80 mg/L. The Queenston Shale and Fonthill Sand media removed the most suspended solids while the Niagara Shale set produced suspended solids. The set containing Fonthill Sand was the only series to meet MOE discharge requirements (< Img/L) for total phosphorus year-round with a twelve month mean effluent concentration of 0.23 mg/L. Year-round all of the root-bed media were well below MOE discharge requirements (< 20mg/L in winter and < 10 mg/L in sumnner) for ammonium. The Queenston Shale and Fonthill Sand sets removed the most total nitrogen. Plants had no effect on total nitrogen removal, but did influence how nitrogen was cycled within the system. Plants increased the removal of suspended solids by 14%, BOD5 by 10% and total phosphorus by 22%. Plants also increased the amount of dissolved oxygen that entered the system. During the plant growing season removal of total phosphorus was better in all sets with plants regardless of media type. The sets containing Queenston Shale and Fonthill Sand media achieved the best results and plants in the Queenston Shale set increased treatment efficiency for every parameter except nitrogen. Vertical flow wetland sewage treatment systems can be designed and built to consistently meet MOE discharge requirements year-round for BOD5, suspended solids, total phosphorus and ammonium. This system Is generally superior to the free water systems and sub-surface horizontal flow systems in cold climate situations.

Hidden Motives: An Analysis of Online ESL Teacher Hiring Practices in Japan and Hong Kong

Hidden Motives: An Analysis of Online English as a Second Language (ESL) Teacher Hiring Practices in Japan and Hong Kong is a qualitative research paper examines and compares two large-scale Asian English language teaching programs: Japan’s Japan Exchange and Teaching (JET) Programme (JET Programme, 2010) and Hong Kong’s Native-speaking English Teacher (NET) Scheme (NET Scheme, 2013). Both government sponsored programs recruit internationally and invite participants to work within each country’s public schools while living amongst local communities and both programs utilize their online presence to attract, inform, and recruit individuals. The purpose of this research is to investigate whether the JET and NET websites are transparent with their governmental motives aside from improving their students’ English language abilities. While JET and NET websites were interrogated, the research questions were regularly revisited to determine if the two sites made any underlying motives clear to the candidates. The research, supported by academic literature, exposed the JET Programme website to be a branch of the Japanese government’s soft power campaign, whereby JET teachers were hired firstly as potential advocates for Japan and Japanese culture rather than English teachers. Conversely, the NET Scheme appeared to be solely commissioned for English language improvement as reflected by their website. Findings from the research can provide insight to applicants to help them decide if they want to participant in these programs. Without clearly understanding the background that motivates these programs, participants may unknowingly be used to support the host government’s agendas.