Mix design process of polyester polymer mortars modified with recycled GFRP waste materials

In this study, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates, between 4% up to 12% in weight, were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of the addition of a silane coupling agent to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers as well as non-conform products and scrap resulting from pultrusion manufacturing process are landfilled, with additional costs to producers and suppliers. Hence, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as partial replacement of aggregates and reinforcement for PM materials, with significant improvements on mechanical properties of resultant mortars with regards to waste-free formulations.

Avaliação de operadoras de saúde por usuários pelo método Analytic Hierarchy Process

OBJETIVO: Analisar a qualidade dos serviços oferecidos por empresas operadoras de planos de saúde, segundo a percepção de usuários. MÉTODOS: Estudo transversal com 360 usuários de sete operadoras de planos de saúde da cidade de Curitiba, PR, e região metropolitana em 2008. Foi aplicado questionário sobre as preferências dos usuários em relação a seis atributos (localização dos pontos de atendimento; efetividade da ação dos médicos, clínicas e hospitais; rapidez e amabilidade no atendimento; facilidade na liberação de guias; preço; abrangência da rede credenciada) de cada uma das empresas operadoras. Para a análise das respostas foi utilizado o método Analytic Hierarchy Process (AHP, ou Processo Analítico de Hierarquia), ferramenta de análise de decisão e planejamento de múltiplos critérios. RESULTADOS: O atributo mais valorizado pelos usuários foi "preço". As empresas foram agrupadas em dois conjuntos de preferências em relação aos atributos: dos sete planos de saúde, dois apresentaram menor preferência (entre 23% e 19%) e cinco, maior preferência (em torno de 10%). CONCLUSÕES: Com esse tipo de pesquisa, as empresas operadoras de planos de saúde poderiam reformular suas estruturas, processos, preços e redes credenciadas com o objetivo de melhorar seu posicionamento no mercado.

Evaluating P-NET message's response time with fixed priority queuing at application process level

P-NET is a multi-master fieldbus standard based on a virtual token passing scheme. In P-NET each master is allowed to transmit only one message per token visit. In the worst-case, the communication response time can be derived considering that, in each token cycle, all stations use the token to transmit a message. In this paper, we define a more sophisticated P-NET model, which considers the actual token utilisation. We then analyse the possibility of implementing a local priority-based scheduling policy to improve the real-time behaviour of P-NET.

Análise por ultra-sons no controlo de condição

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Construção e utilização de equipamentos de baixo custo para ensino de Física

Experimental work has been taking a great importance in Science curricula in several countries. This fact is now changing the conception of the role of the laboratory in the classroom. This role no longer seen as an instrument to illustrate or confirm some concepts but became the essential place of the learning process in Science. However, the implementation of several experimental procedures frequently faces equipment limitations, whether because those indicated in textbooks do not exist in schools due to prohibitive costs for most school budgets, or because their use is far too complex to be done by students. In this dissertation, a few examples of experimental equipment, made with day-today supplies is analyzed, as well as those that can be acquired at low prices and might have high positive effect in the Science learning process. We also discuss some relevant equipment in the teaching of Physics that can be created by teachers and students in schools, as part of curricular or non curricular subject areas such as “Área de Projecto” in the twelfth grade. These equipments, easy to conceive and produce with reasonable costs resources, when compared to the commercial equipment, which are much more expensive, presents very good experimental results.

Foresight methodologies to understand changes in the labour process. Experience from Portugal

The foresight and scenario building methods can be an interesting reference for social sciences, especially in terms of innovative methods for labour process analysis. A scenario – as a central concept for the prospective analysis – can be considered as a rich and detailed portrait of a plausible future world. It can be a useful tool for policy-makers to grasp problems clearly and comprehensively, and to better pinpoint challenges as well as opportunities in an overall framework. The features of the foresight methods are being used in some labour policy making experiences. Case studies developed in Portugal will be presented, and some conclusions will be drawn in order to organise a set of principles for foresight analysis applied to the European project WORKS on the work organisation re-structuring in the knowledge society, and on the work design methods for new management structures of virtual organisations.

Performance of concrete made with aggregates recycled from precasting industry waste: influence of the crushing process

The aim of this paper is to evaluate the influence of the crushing process used to obtain recycled concrete aggregates on the performance of concrete made with those aggregates. Two crushing methods were considered: primary crushing, using a jaw crusher, and primary plus secondary crushing (PSC), using a jaw crusher followed by a hammer mill. Besides natural aggregates (NA), these two processes were also used to crush three types of concrete made in laboratory (L20, L45 e L65) and three more others from the precast industry (P20, P45 e P65). The coarse natural aggregates were totally replaced by coarse recycled concrete aggregates. The recycled aggregates concrete mixes were compared with reference concrete mixes made using only NA, and the following properties related to the mechanical and durability performance were tested: compressive strength; splitting tensile strength; modulus of elasticity; carbonation resistance; chloride penetration resistance; water absorption by capillarity; water absorption by immersion; and shrinkage. The results show that the PSC process leads to better performances, especially in the durability properties. © 2014 RILEM

A complex protocol layer as a linux user-space process

With the current complexity of communication protocols, implementing its layers totally in the kernel of the operating system is too cumbersome, and it does not allow use of the capabilities only available in user space processes. However, building protocols as user space processes must not impair the responsiveness of the communication. Therefore, in this paper we present a layer of a communication protocol, which, due to its complexity, was implemented in a user space process. Lower layers of the protocol are, for responsiveness issues, implemented in the kernel. This protocol was developed to support large-scale power-line communication (PLC) with timing requirements.

Comparative study about heating systems for pultrusion process

Different heating systems have been used in pultrusion, where the most widely used heaters are planar resistances. The primary objective of this study was to develop an improved heating system and compare its performance with that of a system with planar resistances. In this study, thermography was used to better understand the temperature profile along the die. Finite element analysis was performed to determine the amount of energy consumed by the heating systems. Improvements were made to the die to test the new heating system, and it was found that the new system reduced the setup time and energy consumption by approximately 57%.

Overcoming the objectification of western classical music with the concept of music as a process

Dissertation to obtain the degree of Master in Music - Artistic Interpretation

Drilling process of composite laminates – a tool based analysis

“Drilling of polymeric matrix composites structures”

TRAILER – e-Portfolio for collecting and recognizing informal learning process and outcomes

Informal learning is becoming more and more important: Nowadays people learn more this way, through the Internet, than in schools or normal trainings. But they don’t get any certificateswhich attest this fact. So they can't show the employer or teacher etc. that they have learned something. TRAILER project aim is to solve this problem by developing a special tool for managing of all competences and skills acquired through informal learning experiences. Both from the perspective of the user and the perspective of an institution or a company. We’ll present the IT tool to show how people can make their informal learning outcomes visible. TRAILER helps users to gather all information about process and outcomes of their informal learning. Users can share this with friends, colleagues or their employees, teachers and so on. They can create an interactive e-portfolio which can be attached to their CV, cover letter or Knowledge Management system etc. After the presentation of the tool we will discuss possible areas and fields to use this tool. Also we would like to discuss all possible use of the tool by the participants and another needs in this area. Moreover we want to discuss other problems in informal learning process, ways to solve the problems and discuss other ideas of different IT tools which could help in informal learning process. During the discussion we’ll use an interactive respond system which can be used on mobile devices: it makes possible for participants to share their opinions individually before knowing another persons' opinion.

Risk management of new product development process

Dissertation submitted to Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa for the achievement of Integrated Master´s degree in Industrial Management Engineering

A recursive process related to a partisan variation of Wythoff

Wythoff Queens is a classical combinatorial game related to very interesting mathematical results. An amazing one is the fact that the P-positions are given by (⌊├ φn⌋┤┤,├ ├ ⌊φ┤^2 n⌋) and (⌊├ φ^2 n⌋┤┤,├ ├ ⌊φ┤n⌋) where φ=(1+√5)/2. In this paper, we analyze a different version where one player (Left) plays with a chess bishop and the other (Right) plays with a chess knight. The new game (call it Chessfights) lacks a Beatty sequence structure in the P-positions as in Wythoff Queens. However, it is possible to formulate and prove some general results of a general recursive law which is a particular case of a Partizan Subtraction game.

Implementação ferramenta LEAN – TPM - serrote mecânico alternativo

Presentemente, com a economia cada vez mais globalizada e com a grande competitividade do mercado, as empresas de produção procuram cada vez mais ajustar-se às exigências dos clientes. Por esse motivo, o controlo do fluxo produtivo torna-se imprescindível para a resolução de problemas e para a própria melhoria contínua do processo. O sistema “Lean Manufacturing”, é um conjunto de atividades que tem como meta o aumento da capacidade de resposta às mudanças e à minimização dos desperdícios na produção, constituindo-se num verdadeiro empreendimento de gestão inovadora. O TPM – Total Productive Maintenance, é uma ferramenta de melhoria continua cada vez mais utilizada nas empresas com o objetivo de melhorar a eficiência dos seus equipamentos e atingir metas para a redução de desperdícios, incluindo a restauração e manutenção de condições padrão de funcionamento. O presente trabalho visa a implementação da ferramenta TPM num equipamento (Serrote Mecânico Alternativo) instalado no Laboratório das Oficinas Mecânicas do Instituto Superior de Engenharia do Porto. No contexto prático, este trabalho consistiu numa primeira fase por implementar a ferramenta 5S´s no posto de trabalho do equipamento em estudo. Durante esta implementação foi possível detetar algumas anomalias no equipamento, tendo sido sujeitas a uma análise para encontrar as suas causas raiz. Posteriormente foi implementada a ferramenta TPM, de modo, a criar melhores condições de acesso e simplificação das atividades de inspeção, lubrificação e limpeza. Além disso, foi executado e proposto algumas oportunidades de melhoria em alguns elementos, de forma a reduzir tempos de operação e tempos de setup, contribuindo para o aumento da eficiência do equipamento.