A Branch and Bound Algorithm for a Transportation Type Problem with Piecewise Linear Convex Objective Function

A branch and bound type algorithm is presented in this paper to the problem of finding a transportation schedule which minimises the total transportation cost, where the transportation cost over each route is assumed to be a piecewice linear continuous convex function with increasing slopes. The algorithm is an extension of the work done by Balachandran and Perry, in which the transportation cost over each route is assumed to beapiecewise linear discontinuous function with decreasing slopes. A numerical example is solved illustrating the algorithm.

On the Transform Method of Solution of an External Crack Problem

The breakdown of the usual method of Fourier transforms in the problem of an external line crack in a thin infinite elastic plate is discovered and the correct solution of this problem is derived using the concept of a generalised Fourier transform of a type discussed first by Golecki [1] in connection with Flamant's problem.

Finite element analysis of moving contact in mechanically fastened joints

The Finite Element Method (FEM) has made a number of otherwise intractable problems solvable. An important aspect for achieving an economical and accurate solution through FEM is matching the formulation and the computational organisation to the problem. This was realised forcefully in the present case of the solution of a class of moving contact boundary value problems of fastener joints. This paper deals with the problem of changing contact at the pin-hole interface of a fastener joint. Due to moving contact, the stresses and displacements are nonlinear with load. This would, in general, need an interactive-incremental approach for solution. However, by posing the problem in an inverse way, a solution is sought for obtaining loads to suit given contact configuration. Numerical results are given for typical isotropic and composite plates with rigid pins. Two cases of loading are considered: (i) load applied only at the edges of the plate and (ii) load applied at the pin and reacted at a part of the edge of the plate. Load-contact relationships, compliance and stress-patterns are investigated. This paper clearly demonstrates the simplification achieved by a suitable formulation of the problem. The results are of significance to the design and analysis of fastener joints.

The buffering effect of selection, optimization, and compensation strategy use on the relationship between problem solving demands and occupational well-being: A daily diary study

This study investigated within-person relationships between daily problem solving demands, selection, optimization, and compensation (SOC) strategy use, job satisfaction, and fatigue at work. Based on conservation of resources theory, it was hypothesized that high SOC strategy use boosts the positive relationship between problem solving demands and job satisfaction, and buffers the positive relationship between problem solving demands and fatigue. Using a daily diary study design, data were collected from 64 administrative employees who completed a general questionnaire and two daily online questionnaires over four work days. Multilevel analyses showed that problem solving demands were positively related to fatigue, but unrelated to job satisfaction. SOC strategy use was positively related to job satisfaction, but unrelated to fatigue. A buffering effect of high SOC strategy use on the demands-fatigue relationship was found, but no booster effect on the demands-satisfaction relationship. The results suggest that high SOC strategy use is a resource that protects employees from the negative effects of high problem solving demands.

Finite element analysis of moving contact in mechanically fastened joints

The Finite Element Method (FEM) has made a number of otherwise intractable problems solvable. An important aspect for achieving an economical and accurate solution through FEM is matching the formulation and the computational organisation to the problem. This was realised forcefully in the present case of the solution of a class of moving contact boundary value problems of fastener joints. This paper deals with the problem of changing contact at the pin-hole interface of a fastener joint. Due to moving contact, the stresses and displacements are nonlinear with load. This would, in general, need an interactive-incremental approach for solution. However, by posing the problem in an inverse way, a solution is sought for obtaining loads to suit given contact configuration. Numerical results are given for typical isotropic and composite plates with rigid pins. Two cases of loading are considered: (i) load applied only at the edges of the plate and (ii) load applied at the pin and reacted at a part of the edge of the plate. Load-contact relationships, compliance and stress-patterns are investigated. This paper clearly demonstrates the simplification achieved by a suitable formulation of the problem. The results are of significance to the design and analysis of fastener joints.

The avocado problem solver field guide

This guide has been produced to assist Australian avocado growers and others involved in the avocado supply chain to identify the wide range of pests, diseases, nutrient deficiencies and toxicitites, and other disorders that may affect orchards and the quality of fruit reaching the consumer

Considering gambling involvement in the understanding of problem gambling: A large cross-sectional study of an Australian population

Instead of regarding a particular type of gambling activity (for example, electronic gambling machines, table games) as an isolated factor for problem gambling, recent research suggests that gambling involvement (for example, as measured by the number of different types of gambling activities played) should also be considered. Using a large sample of the Victorian adult population, this study found that the strength of association between problem gambling and the type of gambling reduced after adjusting for gambling involvement. This finding supports recent research that gambling involvement is an important factor in assessing the risk of problem gambling. The study also provides insights into the measurements of gambling involvement and provides alternative statistical modelling to analyse problem gambling.

On the bottleneck linear programming problem

In this paper, the results on primal methods for Bottleneck Linear Programming (BLP) problem are briefly surveyed, the primal method is presented and the degenerate case related to Bottleneck Transportation Problem (BTP) is explicitly considered. The algorithm is based on the idea of using auxiliary coefficients as is done by Garfinkel and Rao [6]. The modification presented for the BTP rectifies the defect in Hammer's method in the case of degenerate basic feasible solution. Illustrative numerical examples are also given.

Two-Impurity Kondo Problem

The two-impurity Kondo problem is studied by use of perturbative scaling techniques. The physics is determined by the interplay between the Ruderman-Kittel-Kasuya-Yosida (RKKY) interaction between the two impurity spins and the Kondo effect. In particular, for a strong ferromagnetic RKKY interaction the susceptibility exhibits three structures as the temperature is lowered, corresponding to the ferromagnetic locking together of the two impurity spins followed by a two-stage freezing out of their local moments by the conduction electrons due to the Kondo effect.

A time minimising transportation problem with quality dependent time

The usual assumption made in time minimising transportation problem is that the time for transporting a positive amount in a route is independent of the actual amount transported in that route. In this paper we make a more general and natural assumption that the time depends on the actual amount transported. We assume that the time function for each route is an increasing piecewise constant function. Four algorithms - (1) a threshold algorithm, (2) an upper bounding technique, (3) a primal dual approach, and (4) a branch and bound algorithm - are presented to solve the given problem. A method is also given to compute the minimum bottle-neck shipment corresponding to the optimal time. A numerical example is solved illustrating the algorithms presented in this paper.

Inverse Problem for Fractional Brownian Motion with Discrete Data

The problem of recovering information from measurement data has already been studied for a long time. In the beginning, the methods were mostly empirical, but already towards the end of the sixties Backus and Gilbert started the development of mathematical methods for the interpretation of geophysical data. The problem of recovering information about a physical phenomenon from measurement data is an inverse problem. Throughout this work, the statistical inversion method is used to obtain a solution. Assuming that the measurement vector is a realization of fractional Brownian motion, the goal is to retrieve the amplitude and the Hurst parameter. We prove that under some conditions, the solution of the discretized problem coincides with the solution of the corresponding continuous problem as the number of observations tends to infinity. The measurement data is usually noisy, and we assume the data to be the sum of two vectors: the trend and the noise. Both vectors are supposed to be realizations of fractional Brownian motions, and the goal is to retrieve their parameters using the statistical inversion method. We prove a partial uniqueness of the solution. Moreover, with the support of numerical simulations, we show that in certain cases the solution is reliable and the reconstruction of the trend vector is quite accurate.

Dirichlet problem at infinity for p-harmonic functions on negatively curved spaces

The object of this dissertation is to study globally defined bounded p-harmonic functions on Cartan-Hadamard manifolds and Gromov hyperbolic metric measure spaces. Such functions are constructed by solving the so called Dirichlet problem at infinity. This problem is to find a p-harmonic function on the space that extends continuously to the boundary at inifinity and obtains given boundary values there. The dissertation consists of an overview and three published research articles. In the first article the Dirichlet problem at infinity is considered for more general A-harmonic functions on Cartan-Hadamard manifolds. In the special case of two dimensions the Dirichlet problem at infinity is solved by only assuming that the sectional curvature has a certain upper bound. A sharpness result is proved for this upper bound. In the second article the Dirichlet problem at infinity is solved for p-harmonic functions on Cartan-Hadamard manifolds under the assumption that the sectional curvature is bounded outside a compact set from above and from below by functions that depend on the distance to a fixed point. The curvature bounds allow examples of quadratic decay and examples of exponential growth. In the final article a generalization of the Dirichlet problem at infinity for p-harmonic functions is considered on Gromov hyperbolic metric measure spaces. Existence and uniqueness results are proved and Cartan-Hadamard manifolds are considered as an application.

Indigofera linnaei-a problem legume across northern pastures

Indigofera linnaei (or Birdsville Indigo) is a native legume with widespread abundance in pastures across northern Australian, and occurs in all northern regions of Australia from the tropical Kimberleys and arid central Australia to subhumid coastal Queensland (Figure 1). I. linnaei in central Australia has been linked to canine fatalities due to the toxin indospicine. Indospicine, an analog of arginine, is an unusual non-protein amino acid found only in a number of Indigofera species including I. linnaei. Dogs are particularly sensitive to the heptatoxicity of indospicine, and while they do not themselves consume the plant, dogs have been poisoned indirectly through the consumption of indospicine-contaminated meat from horses and camels grazing in regions where I. linnaei is common (Hegarty and Pound 1988, FitzGerald et al 2011). I. linnaei is observed to occur in various forms from strongly prostrate in south-east Queensland to an erect shrub-like form growing to more than 50cm in height in some northern regions. It mostly occurs as a minor proportion of native pasture but denser stands develop under certain circumstances. The indospicine content of I. linnaei has not previously been reported outside of central Australia, and in this study we investigate the indospicine content of plant samples collected across various regions, including both prostrate and upright forms. All samples were collected in March-July, dried, milled and analysed by UPLC-MS/MS in an adaption of our method (Tan et al 2014). Indospicine was determined in all I. linnaei plant samples regardless of region or growth form (Table 1). Measured levels were in the range 159.5 to 658.8 mg/kg DM and indicate that this plant may pose a similar problem in all areas dependent on local seasonal abundance.

On the orthogonality of suboptimum estimate in the combined estimation and control problem

By deriving the equations for an error analysis of modeling inaccuracies for the combined estimation and control problem, it is shown that the optimum estimation error is orthogonal to the actual suboptimum estimate.