Tuning the design procedures for laser processed microwave mechanics

This research has been focused at the development of a tuned systematic design methodology, which gives the best performance in a computer aided environment and utilises a cross-technological approach, specially tested with and for laser processed microwave mechanics. A tuned design process scheme is also presented. Because of the currently large production volumes of microwave and radio frequency mechanics even slight improvements of design methodologies or manufacturing technologies would give reasonable possibilities for cost reduction. The typical number of required iteration cycles could be reduced to one fifth of normal. The research area dealing with the methodologies is divided firstly into a function-oriented, a performance-oriented or a manufacturability-oriented product design. Alternatively various approaches can be developed for a customer-oriented, a quality-oriented, a cost-oriented or an organisation-oriented design. However, the real need for improvements is between these two extremes. This means that the effective methodology for the designers should not be too limited (like in the performance-oriented design) or too general (like in the organisation-oriented design), but it should, include the context of the design environment. This is the area where the current research is focused. To test the developed tuned design methodology for laser processing (TDMLP) and the tuned optimising algorithm for laser processing (TOLP), seven different industrial product applications for microwave mechanics have been designed, CAD-modelled and manufactured by using laser in small production series. To verify that the performance of these products meets the required level and to ensure the objectiveness ofthe results extensive laboratory tests were used for all designed prototypes. As an example a Ku-band horn antenna can be laser processed from steel in 2 minutes at the same time obtaining a comparable electrical performance of classical aluminium units or the residual resistance of a laser joint in steel could be limited to 72 milliohmia.

Is blood still thicker than water? A life-course perspective on the transformation of family and friends' roles in personal networks

This thesis addresses the issue of the moving boundaries between family and friends' roles in personal networks, adopting a life-course perspective and using Switzerland as a case study. In a period of major changes in personal life happening in contemporary Western societies, understanding the organization of personal networks intertwined with the unfolding of individual life courses is of prime importance in facing new challenges with regard to social integration. The data stem from a representative national survey carried out in 2011 named Family tiMes, including 803 individuals born either in 1950-1955 or in 1970-1975. An innovative research design was adopted, combing cross-sectional ego-centered network data and retrospective longitudinal life-course data. The results show continuing boundaries between family and friends' roles and that family keeps a prominent role in personal networks despite the notable importance of friendship ties. One relationship stands out above all, that with the partner, followed quite a few steps behind by those with children. Regarding life courses, de-standardization tendencies were found in family formation and also a persistent gendering of occupational trajectories. Two kinds of life trajectories are particularly intertwined with personal networks, co-residence and partnership trajectories, both related to the unfolding of family life. In particular, transition to parenthood functions as a turning point in individuals' lives, deeply transforming their sociability. Finally, a twofold pluralization process was identified, affecting simultaneously the organization of personal networks and the unfolding of individual life courses. This thesis contributes to the literature on the sociology of family and personal life, and to fruitful interlinkage between the network approach and the life-course perspective.

Design,implementation and use of an Internet kiosk as an an information system for CNC machinists

Tätä diplomityötä sponsoroi suuri Isobritannialainen lentokoneteollisuudessa toimiva yritys, joka huomasi että globaalin tuotantostrategian ollessa painopisteenä ja tietoteknisten järjestelmien kuten CAD/CAM ollessa merkittävänä osana tuotantoa, on löydettävä ymmärrys siitä, mitkä ovat tuotannon tietojärjestelmien tarpeet ja onko niiden kehittämisestä hyötyä yritykselle.Diplomityössä selitetään Internet teknologiaan perustuvan kioskin kehittämisestä tietotukijärjestelmäksi tuotanto-osastolle, jossa valmistetaan moottorin osia CNC-koneilla. Kioskeissa on piirteitä, jotka voisivat osoittautua hyödyllisiksi myös tuotantoympäristöissä ja siksi tässä työssä tutkitaan kioskiin perustuvaa lähestymistapaa tuotantoympäristöön sovellettuna.Diplomityö kuvaa informaatiokioskin kehittämistä alkaen alkuvaatimusten keruusta tietojärjestelmää varten, tietojärjestelmän suunnittelu- ja kehitysvaiheen sekä lopuksi analysoi kioskin onnistuneisuutta tuotantoympäristössä käytettävyystutkimuksen avulla, joka suoritettiin sen jälkeen kun kioski oli implementoitu tehtaassa.Johtopäätökset osoittavat, että kioski on hyvin implementoitavissa tuotantoympäristöön ja todistaa, että tuotantoinformaation jakelu sähköisessä muodossa on huomattavasti tehokkaampaa kuin paperilla. Käyttäjien kommentit osoittavat että kioski on sopiva heidän tietotarpeisiinsa ja siitä on hyötyä heidän työlleen. Kioski tarjoaa hyötyjä tuotantotason lisäksi myös johtotasolle.

Ekologisen kuorilevyn valmistaminen puunjalostusteollisuuden sivutuotteista

Puunjalostusteollisuudessa syntyy huomattavia määriä sivutuotteita, joiden hyödyntäminen on vielä vajavaista. Sahajauhon ja puukuoren pääasiallinen käyttö rajoittuu energiantuotantoon eli polttamiseen voimalaitoksissa. Selostettavassa tutkimustyössä, joka on tehty Lappeenrannan teknillisen yliopiston puunjalostustekniikan levylaboratoriossa, on pyritty selvittämään kotimaisten kuusi-, mänty- ja koivukuorten käyttömahdollisuuksia raaka-aineina lastulevyn tapaan ns. ekologisen kuorilevyn valmistamisessa, mutta ilman liimaa. Tutkimusmateriaalina käytettiin puunjalostusteollisuudesta hankittua tuoretta kuusen ja männyn rumpukuorintajätettä sekä koivun roottorikuorintajätettä, joista kukin raaka-aine pienennettiin kahteen eri partikkelikokoon käyttäen oksasilppuria ja vasaramyllyä. Raaka-ainemäärät mitattiin ja kaadettiin viiran päällä olevaan puusta valmistettuun muottiin ja muotin poisnostamisen jälkeen levyaihio puristettiin 1-välikuumapuristimessa sykleittäin. Valmistetut kuorilevyt olivat 1 -kerroksisia. Koelevyistä tutkittiin kosteuspitoisuus, tilavuuspaino, taivutuslujuus ja Brinell -kovuus.Saadut tulokset osoittavat, että kuusen, männyn ja koivun kuoresta voidaan valmistaa kuorilevyä ilman liima-ainetta, sillä puukuoren sisältämät omat liimaavuutta parantavat uuteaineet antavat riittävän vaikutuksen kuorilevyn rakenteen stabiloimiseksi. Tällaisen kuorilevyn taivutuslujuus on kuitenkin huomattavasti heikompi kuin puulastulevyllä. Kaikki jauhetusta raaka-aineesta sekä pelkästään silputusta koivuraaka-aineesta valmistetut kuorilevyt täyttävät taivutuslujuuden osalta kuitenkin huokoiselle, A-lujuusluokan standardi-kuitulevylle asetetut vaatimukset. Tarkasteltaessa eri raaka-aineista valmistettujen levyjen ominaisuuksia, voidaan todeta, että tilavuuspainoltaan suurinta sekä kovuudeltaan ja taivutuslujuudeltaan parasta levyä saadaan valmistettua jauhetusta koivukuoresta. Jokaisen valmistetun kuorilevyn kovuusarvo ylittää Suomen johtavan lastulevyn valmistajan lastulevyn kovuusarvon lukuun ottamatta pelkästään silputuista kuusi- ja mäntykuorista valmistettuja levyjä.Vaikka tulokset ovat suuntaa-antavia, osoittavat ne selvästi millaisia mahdollisuuksia tarjoaa puun kuoren tai sahajauhon käyttäminen lastulevyn tapaan valmistettavien levyjen raaka-aineena. Koko tutkimuskenttä on tässä käsiteltävänä olevalla alueella varsin laaja, ja tässä tutkimuksessa selvitetyt asiat ovat siitä vain pieni osa antaen kuitenkin suunnan useille tärkeille jatkossa selvitettäville asioille. Näistä mainittakoon mm. ekologisen levyn jatkojalostus ja tuotesuunnittelu, levyn valmistuksen taloudellisuus ja tuotteiden markkinointi, kuorilevyn valmistusprosessin kehittäminen sekä eri raaka-aineyhdistelmien kokeilu kuorilevyn raaka-aineena.

High-Speed Solid-Rotor Induction Machine – Electromagnetic Calculation and Design

Within the latest decade high-speed motor technology has been increasingly commonly applied within the range of medium and large power. More particularly, applications like such involved with gas movement and compression seem to be the most important area in which high-speed machines are used. In manufacturing the induction motor rotor core of one single piece of steel it is possible to achieve an extremely rigid rotor construction for the high-speed motor. In a mechanical sense, the solid rotor may be the best possible rotor construction. Unfortunately, the electromagnetic properties of a solid rotor are poorer than the properties of the traditional laminated rotor of an induction motor. This thesis analyses methods for improving the electromagnetic properties of a solid-rotor induction machine. The slip of the solid rotor is reduced notably if the solid rotor is axially slitted. The slitting patterns of the solid rotor are examined. It is shown how the slitting parameters affect the produced torque. Methods for decreasing the harmonic eddy currents on the surface of the rotor are also examined. The motivation for this is to improve the efficiency of the motor to reach the efficiency standard of a laminated rotor induction motor. To carry out these research tasks the finite element analysis is used. An analytical calculation of solid rotors based on the multi-layer transfer-matrix method is developed especially for the calculation of axially slitted solid rotors equipped with wellconducting end rings. The calculation results are verified by using the finite element analysis and laboratory measurements. The prototype motors of 250 – 300 kW and 140 Hz were tested to verify the results. Utilization factor data are given for several other prototypes the largest of which delivers 1000 kW at 12000 min-1.

Soft tissue artifact distribution on lower limbs during treadmill gait: Influence of skin markers' location on cluster design.

Segment poses and joint kinematics estimated from skin markers are highly affected by soft tissue artifact (STA) and its rigid motion component (STARM). While four marker-clusters could decrease the STA non-rigid motion during gait activity, other data, such as marker location or STARM patterns, would be crucial to compensate for STA in clinical gait analysis. The present study proposed 1) to devise a comprehensive average map illustrating the spatial distribution of STA for the lower limb during treadmill gait and 2) to analyze STARM from four marker-clusters assigned to areas extracted from spatial distribution. All experiments were realized using a stereophotogrammetric system to track the skin markers and a bi-plane fluoroscopic system to track the knee prosthesis. Computation of the spatial distribution of STA was realized on 19 subjects using 80 markers apposed on the lower limb. Three different areas were extracted from the distribution map of the thigh. The marker displacement reached a maximum of 24.9mm and 15.3mm in the proximal areas of thigh and shank, respectively. STARM was larger on thigh than the shank with RMS error in cluster orientations between 1.2° and 8.1°. The translation RMS errors were also large (3.0mm to 16.2mm). No marker-cluster correctly compensated for STARM. However, the coefficient of multiple correlations exhibited excellent scores between skin and bone kinematics, as well as for STARM between subjects. These correlations highlight dependencies between STARM and the kinematic components. This study provides new insights for modeling STARM for gait activity.

Large Break Blowdown Test Facility Study

Työn tarkoituksena on kerätä yhteen tiedot kaikista maailmalta löytyvistä ison LOCA:n ulospuhallusvaiheen tutkimiseen käytetyistä koelaitteistoista. Työn tarkoituksena on myös antaa pohjaa päätökselle, onko tarpeellista rakentaa uusi koelaitteisto nesterakenne-vuorovaikutuskoodien laskennan validoimista varten. Ennen varsinaisen koelaitteiston rakentamista olisi tarkoituksenmukaista myös rakentaa pienempi pilottikoelaitteisto, jolla voitaisiin testata käytettäviä mittausmenetelmiä. Sopivaa mittausdataa tarvitaan uusien CFD-koodien ja rakenneanalyysikoodien kytketyn laskennan validoimisessa. Näitä koodeja voidaan käyttää esimerkiksi arvioitaessa reaktorin sisäosien rakenteellista kestävyyttä ison LOCA:n ulospuhallusvaiheen aikana. Raportti keskittyy maailmalta löytyviin koelaitteistoihin, uuden koelaitteiston suunnitteluperusteisiin sekä aiheeseen liittyviin yleisiin asioihin. Raportti ei korvaa olemassa olevia validointimatriiseja, mutta sitä voi käyttää apuna etsittäessä validointitarkoituksiin sopivaa ison LOCA:n ulospuhallusvaiheen koelaitteistoa.

Clinical and course characteristics of depression and all-cause mortality: A prospective population-based study.

BACKGROUND: Given the large heterogeneity of depressive disorders (DD), studying depression characteristics according to clinical manifestations and course is a more promising approach than studying depression as a whole. The purpose of this study was to determine the association between clinical and course characteristics of DD and incident all-cause mortality. METHODS: CoLaus|PsyCoLaus is a prospective cohort study (mean follow-up duration=5.2 years) including 35-66 year-old randomly selected residents of an urban area in Switzerland. A total of 3668 subjects (mean age 50.9 years, 53.0% women) underwent physical and psychiatric baseline evaluations and had a known vital status at follow-up (98.8% of the baseline sample). Clinical (diagnostic severity, atypical features) and course characteristics (recency, recurrence, duration, onset) of DD according to the DSM-5 were elicited using a semi-structured interview. RESULTS: Compared to participants who had never experienced DD, participants with current but not remitted DD were more than three times as likely to die (Hazard Ratio: 3.2, 95% CI: 1.1-10.0) after adjustment for socio-demographic and lifestyle characteristics, comorbid anxiety disorders, antidepressant use, and cardiovascular risk factors and diseases. There was no evidence for associations between other depression characteristics and all-cause mortality. LIMITATIONS: The small proportion of deceased subjects impeded statistical analyses of cause-specific mortality. CONCLUSIONS: A current but not remitted DD is a strong predictor of all-cause mortality, independently of cardiovascular or lifestyle factors, which suggests that the effect of depression on mortality diminishes after remission and further emphasizes the need to adequately treat current depressive episodes.

Breast implant-associated anaplastic large cell lymphoma: two distinct clinicopathological variants with different outcomes.

BACKGROUND: ALK-negative anaplastic large cell lymphoma associated with breast implant (i-ALCL) has been recently recognized as a distinct entity. Among 43 830 lymphomas registered in the French Lymphopath network since 2010, 300 breast lymphomas comprising 25 peripheral T-cell lymphomas (PTCL) were reviewed. Among PTCL, ALK-negative ALCL was the most frequent and all of them were associated with breast implants. PATIENTS AND METHODS: Since 2010, all i-ALCL cases were collected from different institutions through Lymphopath. Immuno-morphologic features, molecular data and clinical outcome of 19 i-ALCLs have been retrospectively analyzed. RESULTS: The median age of the patients was 61 years and the median length between breast implant and i-ALCL was 9 years. Most implants were silicone-filled and textured. Implant removal was performed in 17 out of 19 patients with additional treatment based on mostly CHOP or CHOP-like chemotherapy regimens (n = 10/19) or irradiation (n = 1/19). CHOP alone or ABVD following radiation without implant removal have been given in two patients. The two clinical presentations, i.e. effusion and less frequently tumor mass correlated with distinct histopathologic features: in situ i-ALCL (anaplastic cell proliferation confined to the fibrous capsule) and infiltrative i-ALCL (pleomorphic cells massively infiltrating adjacent tissue with eosinophils and sometimes Reed-Sternberg-like cells mimicking Hodgkin lymphoma). Malignant cells were CD30-positive, showed a variable staining for EMA and were ALK negative. Most cases had a cytotoxic T-cell immunophenotype with variable T-cell antigen loss and pSTAT3 nuclear expression. T-cell receptor genes were clonally rearranged in 13 out of 13 tested cases. After 18 months of median follow-up, the 2-year overall survival for in situ and infiltrative i-ALCL was 100% and 52.5%, respectively. CONCLUSIONS: In situ i-ALCLs have an indolent clinical course and generally remain free of disease after implant removal. However, infiltrative i-ALCLs could have a more aggressive clinical course that might require additional therapy to implant removal.

Designing an undergraduate laboratory course in general chemistry

From an analysis of a learning model based on the theory of information processing four hypothesis were developed for improving the design of laboratory courses. Three of these hypotheses concerned specific procedures to minimise the load on students' working memories (or working spaces) and the fourth hypothesis was concerned with the value of mini-projects in enhancing meaningful learning of the knowledge and skills underpinning the set experiments. A three-year study of a first year undergraduate chemistry laboratory course at a Scottish university has been carried out to test these four hypotheses. This paper reports the results of the study relevant to the three hypotheses about the burden on students' working spaces. It was predicted from the learning model that the load on students working space should be reduced by appropriate changes to the written instructions and the laboratory organisation and by the introduction of prelab-work and prelab-training in laboratory techniques. It was concluded from research conducted over the three years period that all these hypothesised changes were effective both in reducing the load on students' working spaces and in improving their attitudes to the laboratory course.

Trigger and data link system for CMS Resistive Plate Chambers at the LHC accelerator

The purpose of the work was to realize a high-speed digital data transfer system for RPC muon chambers in the CMS experiment on CERN’s new LHC accelerator. This large scale system took many years and many stages of prototyping to develop, and required the participation of tens of people. The system interfaces to Frontend Boards (FEB) at the 200,000-channel detector and to the trigger and readout electronics in the control room of the experiment. The distance between these two is about 80 metres and the speed required for the optic links was pushing the limits of available technology when the project was started. Here, as in many other aspects of the design, it was assumed that the features of readily available commercial components would develop in the course of the design work, just as they did. By choosing a high speed it was possible to multiplex the data from some the chambers into the same fibres to reduce the number of links needed. Further reduction was achieved by employing zero suppression and data compression, and a total of only 660 optical links were needed. Another requirement, which conflicted somewhat with choosing the components a late as possible was that the design needed to be radiation tolerant to an ionizing dose of 100 Gy and to a have a moderate tolerance to Single Event Effects (SEEs). This required some radiation test campaigns, and eventually led to ASICs being chosen for some of the critical parts. The system was made to be as reconfigurable as possible. The reconfiguration needs to be done from a distance as the electronics is not accessible except for some short and rare service breaks once the accelerator starts running. Therefore reconfigurable logic is extensively used, and the firmware development for the FPGAs constituted a sizable part of the work. Some special techniques needed to be used there too, to achieve the required radiation tolerance. The system has been demonstrated to work in several laboratory and beam tests, and now we are waiting to see it in action when the LHC will start running in the autumn 2008.

Modern recovery boiler design criteria

Engineering and pricing of large recovery boiler were studied in this work. Engineering was carried out with Anita 4.2 which is an engineering program of Andritz. Key initial values were chosen with previous studies. Primary target of this work was to find out the consequences that furnace dimensions and furnace screen vertical part has to boiler pricing. Boilers that were engineered had different rate of furnace width and depth and different heat transfer plate count. Boiler balances were invariable. Boilers with different vertical screen construction were also calculated. First variation was boiler with vertical screen up to furnace roof. Other variation was to connect vertical screen to Pre-boiler generating bank inlet tubes. Total prices were calculated to engineered boilers. Pricing was sort out to heat transfers, high pressure pipes, steel structures, auxiliary equipments and civil/structural costs. This study did not notice parts of the boiler which costs do not vary with the construction of the boiler. Heat transfers had the largest share of costs. Boiler building had the most significant differences between the boilers. Furnace screen had also significant role especially to costs of the boiler building.

Development of IT Service Management in a Large International Company

The purpose of this Master’s thesis is to examine the IT Service Management (ITSM) capabilities of a large international company and develop a design for the IT Service Management of the company. The thesis consists of two parts: a literature review and a case study. The first part is the literature review. It examines different aspects of IT Service Management. The purpose of the literature review is to increase the credibility of the case study. In the case study, the IT Service Management of a large industrial company is assessed, and an improved design for IT Service Management is created. The services are limited to common IT services, and management is limited to operative management. To assess and develop the case company’s IT Service Management, the IT organization and its ITSM capabilities are analyzed, and on the basis of the analyses, an improved IT Service Management model is created. As a result of the analyses, it was found out that the management of the IT organization is function-oriented. Therefore, the organization needs a management model that breaks the functional borders and brings services to the center of management. The designed model aspires to achieve this by defining IT services and modeling management processes from the service perspective.

Student experiences in a course blended learning

Fascination is a project for design students, developed jointly by the Technical University of Catalonia (UPC) and the University of Technology Thonburi (KMUTT), which works with two groups of students, one group of participants in Spain and another group in Thailand where, hands-on activities, a range of technologies are used to prepare students for the lessons, through learning activities and content. This research paper presents the test of both a general model and a tool for measuring the participants’ experiences in a course that uses a blended learning methodology, with the aim of collecting empirical evidence to justify the effort of applying this methodology, based on the participants’ satisfaction. The procedure used in the conceptualization of the survey, the generation of topics, the collection of data, and the validation of the scale of various items are described here. The information, provided by the 26 people surveyed about the course and the virtual environment that was used, was analyzed to measure their perceptions and explore possible relations. Finally the conclusions of the research and the future work are presented.

Design of an Event Based Messaging System

B2B document handling is moving from paper to electronic networks and electronic domain very rapidly. Moving, handling and transforming large electronic business documents requires a lot from the systems handling them. This paper explores new technologies such as SOA, event-driven systems and ESB and a scalable, event-driven enterprise service bus is created to demonstrate these new approaches to message handling. As an end result, we have a small but fully functional messaging system with several different components. This is the first larger Java-project done in-house, so on the side we developed our own set of best practices of Java development, setting up configurations, tools, code repositories and class naming and much more.