Post-exercise depression in corticomotor excitability after dynamic movement: a general property of fatiguing and non-fatiguing exercise

Transcranial magnetic stimulation has been used to study changes in central excitability associated with motor tasks. Recently, we reported that a finger flexion–extension task performed at a maximal voluntary rate (MVR) could not be sustained and that this was not due to muscle fatigue, but was more likely a breakdown in central motor control. To determine the central changes that accompany this type of movement task, we tracked motor-evoked potential (MEP) amplitude from the first dorsal interosseous (FDI) and abductor pollicis brevis (APB) muscles of the dominant hand in normal subjects for 20 min after a 10 sec index finger flexion–extension task performed at MVR and at a moderate sustainable rate (MSR) and half the MSR (MSR/2). The FDI MEP amplitude was reduced for up to 6–8 min after each of the tasks but there was a greater and longer-lasting reduction after the MSR and MSR/2 tasks compared to the MVR task. There was a similar reduction in the amplitude of the FDI MEP after a 10 sec cyclic index finger abduction–adduction task when the FDI was acting as the prime mover. The amplitude of the MEP recorded from the inactive APB was also reduced after the flexion–extension tasks, but to a lesser degree and for a shorter duration. Measurements of short-interval cortical inhibition revealed an increase in inhibition after all of the finger flexion–extension tasks, with the MSR task being associated with the greatest degree of inhibition. These findings indicate that a demanding MVR finger movement task is followed by a period of reduced corticomotor excitability and increased intracortical inhibition. However, these changes also occur with and are greater with slower rates of movement and are not specific for motor demand, but may be indicative of adaptive changes in the central motor pathway after a period of repetitive movement.

Disc herniations in astronauts: What causes them, and what does it tell us about herniation on earth?

PURPOSE: Recent work showed an increased risk of cervical and lumbar intervertebral disc (IVD) herniations in astronauts. The European Space Agency asked the authors to advise on the underlying pathophysiology of this increased risk, to identify predisposing factors and possible interventions and to suggest research priorities. METHODS: The authors performed a narrative literature review of the possible mechanisms, and conducted a survey within the team to prioritize research and prevention approaches. RESULTS AND CONCLUSIONS: Based on literature review the most likely cause for lumbar IVD herniations was concluded to be swelling of the IVD in the unloaded condition during spaceflight. For the cervical IVDs, the knowledge base is too limited to postulate a likely mechanism or recommend approaches for prevention. Basic research on the impact of (un)loading on the cervical IVD and translational research is needed. The highest priority prevention approach for the lumbar spine was post-flight care avoiding activities involving spinal flexion, followed by passive spinal loading in spaceflight and exercises to reduce IVD hyper-hydration post-flight.

The effects of rehabilitation on the muscles of the trunk following prolonged bed rest

Microgravity and inactivity due to prolonged bed rest have been shown to result in atrophy of spinal extensor muscles such as the multifidus, and either no atrophy or hypertrophy of flexor muscles such as the abdominal group and psoas muscle. These effects are long-lasting after bed rest and the potential effects of rehabilitation are unknown. This two-group intervention study aimed to investigate the effects of two rehabilitation programs on the recovery of lumbo-pelvic musculature following prolonged bed rest. 24 subjects underwent 60 days of head down tilt bed rest as part of the 2nd Berlin BedRest Study (BBR2-2). After bed rest, they underwent one of two exercise programs, trunk flexor and general strength (TFS) training or specific motor control (SMC) training. Magnetic resonance imaging of the lumbo-pelvic region was conducted at the start and end of bed rest and during the recovery period (14 and 90 days after re-ambulation). Cross-sectional areas (CSAs) of the multifidus, psoas, lumbar erector spinae and quadratus lumborum muscles were measured from L1 to L5. Morphological changes including disc volume, spinal length, lordosis angle and disc height were also measured. Both exercise programs restored the multifidus muscle to pre-bed-rest size, but further increases in psoas muscle size were seen in the TFS group up to 14 days after bed rest. There was no significant difference in the number of low back pain reports for the two rehabilitation groups (p=.59). The TFS program resulted in greater decreases in disc volume and anterior disc height. The SMC training program may be preferable to TFS training after bed rest as it restored the CSA of the multifidus muscle without generating potentially harmful compressive forces through the spine.

Changes in lower extremity muscle function after 56 days of bed rest

Preservation of muscle function, known to decline in microgravity and simulation (bed rest), is important for successful spaceflight missions. Hence, there is great interest in developing interventions to prevent muscle-function loss. In this study, 20 males underwent 56 days of bed rest. Ten volunteers were randomized to do resistive vibration exercise (RVE). The other 10 served as controls. RVE consisted of muscle contractions against resistance and concurrent whole-body vibration. Main outcome parameters were maximal isometric plantar-flexion force (IPFF), electromyography (EMG)/force ratio, as well as jumping power and height. Measurements were obtained before and after bed rest, including a morning and evening assessment on the first day of recovery from bed rest. IPFF (-17.1%), jumping peak power (-24.1%), and height (-28.5%) declined (P < 0.05) in the control group. There was a trend to EMG/force ratio decrease (-20%; P = 0.051). RVE preserved IPFF and mitigated the decline of countermovement jump performance (peak power -12.2%; height -14.2%). In both groups, IPFF was reduced between the two measurements of the first day of reambulation. This study indicates that bed rest and countermeasure exercises differentially affect the various functions of skeletal muscle. Moreover, the time course during recovery needs to be considered more thoroughly in future studies, as IPFF declined not only with bed rest but also within the first day of reambulation. RVE was effective in maintaining IPFF but only mitigated the decline in jumping performance. More research is needed to develop countermeasures that maintain muscle strength as well as other muscle functions including power.

Limited effect of fly-wheel and spinal mobilization exercise countermeasures on lumbar spine deconditioning during 90 d bed-rest in the Toulouse LTBR study

We examined the effect of high-load fly-wheel (targeting the lower-limb musculature and concurrent loading of the spine via shoulder restraints) and spinal movement countermeasures against lumbar spine muscle atrophy, disc and spinal morphology changes and trunk isokinetic torque loss during prolonged bed-rest. Twenty-four male subjects underwent 90 d head-down tilt bed-rest and performed either fly-wheel (FW) exercises every three days, spinal movement exercises in lying five times daily (SpMob), or no exercise (Ctrl). There was no significant impact of countermeasures on losses of isokinetic trunk flexion/extension (p≥0.65). Muscle volume change by day-89 of bed-rest in the psoas, iliacus, lumbar erector spinae, lumbar multifidus and quadratus lumborum, as measured via magnetic resonance imaging (MRI), was statistically similar in all three groups (p≥0.33). No significant effect on MRI-measures of lumbar intervertebral disc volume, spinal length and lordosis (p≥0.09) were seen either, but there was some impact (p≤0.048) on axial plane disc dimensions (greater reduction than in Ctrl) and disc height (greater increases than in Ctrl). MRI-data from subjects measured 13 and 90-days after bed-rest showed partial recovery of the spinal extensor musculature by day-13 after bed-rest with this process complete by day-90. Some changes in lumbar spine and disc morphology parameters were still persistent 90-days after bed-rest. The present results indicate that the countermeasures tested were not optimal to maintain integrity of the spine and trunk musculature during bed rest. © 2011 Elsevier Ltd.

Can exercise positively influence the intervertebral disc?

To better understand what kinds of sports and exercise could be beneficial for the intervertebral disc (IVD), we performed a review to synthesise the literature on IVD adaptation with loading and exercise. The state of the literature did not permit a systematic review; therefore, we performed a narrative review. The majority of the available data come from cell or whole-disc loading models and animal exercise models. However, some studies have examined the impact of specific sports on IVD degeneration in humans and acute exercise on disc size. Based on the data available in the literature, loading types that are likely beneficial to the IVD are dynamic, axial, at slow to moderate movement speeds, and of a magnitude experienced in walking and jogging. Static loading, torsional loading, flexion with compression, rapid loading, high-impact loading and explosive tasks are likely detrimental for the IVD. Reduced physical activity and disuse appear to be detrimental for the IVD. We also consider the impact of genetics and the likelihood of a ‘critical period’ for the effect of exercise in IVD development. The current review summarises the literature to increase awareness amongst exercise, rehabilitation and ergonomic professionals regarding IVD health and provides recommendations on future directions in research.

The effects of military body armour on trunk and hip kinematics during performance of manual handling tasks

Musculoskeletal injuries are reported as burdening the military. An identified risk factor for injury is carrying heavy loads; however, soldiers are also required to wear their load as body armour. To investigate the effects of body armour on trunk and hip kinematics during military-specific manual handling tasks, 16 males completed 3 tasks while wearing each of 4 body armour conditions plus a control. Three-dimensional motion analysis captured and quantified all kinematic data. Average trunk flexion for the weightiest armour type was higher compared with control during the carry component of the ammunition box lift (p < 0.001) and sandbag lift tasks (p < 0.001). Trunk rotation ROM was lower for all armour types compared with control during the ammunition box place component (p < 0.001). The altered kinematics with body armour occurred independent of armour design. In order to optimise armour design, manufacturers need to work with end-users to explore how armour configurations interact with range of personal and situational factors in operationally relevant environments. Practitioner Summary: Musculoskeletal injuries are reported as burdening the military and may relate to body armour wear. Body armour increased trunk flexion and reduced trunk rotation during military-specific lifting and carrying tasks. The altered kinematics may contribute to injury risk, but more research is required.

Modulation of corticomotor excitability after maximal or sustainable-rate repetitive finger movement is impaired in Parkinson’s disease and is reversed by levodopa

Objectives: In healthy subjects, fatiguing exercises induce a period of post-exercise corticomotor depression (PECD) that is absent in Parkinson’s disease (PD). Our objective is to determine the time-course of corticomotor excitability changes following a 10-s repetitive index finger flexion–extension task performed at maximal voluntary rate (MVR) and a slower sustainable rate (MSR) in PD patients OFF and ON levodopa.
Methods: In 11 PD patients and 10 healthy age-matched controls, motor evoked potentials (MEPs) were recorded from the extensor indicis proprius (EIP) and first dorsal interosseous (FDI) muscles of the dominant arm immediately after the two tasks and at 2-min intervals for 10 min.
Results: In the OFF condition the PECD was absent in the two test muscles after both the MVR and MSR tasks. In the ON condition finger movement kinematics improved and a period of PECD comparable to that in controls was present after both tasks.
Conclusion: The absence of PECD in PD subjects off medication indicates a persisting increase in corticomotor excitability after non-fatiguing repetitive finger movement that is reversed by levodopa.

Utilização de resíduo lignocelulósico na obtenção de chapa de madeira aglomerada homogênea e compósito reforçado com fibra de vidro-E

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings

Marcas dermatoglíficas, Antropometria e as qualidades físicas básicas dos escolares da rede municipal da cidade de Manaus

The objective of this study of comparative descriptive character went aimed at to analyze the characteristics dermatoglyphics, anthropometrics and the basic physical qualities, in 180 selected scholars in a stratified way, distributed like this: 10 year-old boys = 32; 09 years = 32; 08 years = 32; 10 year-old girls = 28; 09 years = 28; 08 years = 28), studying the fundamental teaching of the School Good Municipal Hope, located in the area east, in the Neighborhood of the Crowned, in the city of Manaus, Amazon. For identification of the dermatoglyphics characteristics collected, was the fingerprints; for evaluation of the corporal mass, height and IMC, they were used a digital scale with an estadiometer of the mark Filizola. The tests: to sit down and to reach flexibility); Horizontal Impulse or I jump in distance stopped (force of inferior members); Flex and extension of the trunk (it Forces abdominal); Flexion and extension of the arms in suspension in the bar (Force of superior members); 30 meters (Speed) and 9 minutes (Resistance applied aerobic) was to evaluate the basic physical qualities. The results demonstrated that differences didn't exist among the goods, in most of the studied variables, and the existent differences among the ages of 8, 9 and 10 years, they demonstrate a normality tendency in the infantile development

Descrição do movimento da articulação metacarpofalangiana de equinos pela metodologia baseada em videogrametria

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Oportunidades de melhoria ergonômica das exigências físicas da atividade jangadeira em Ponta Negra Natal-RN

The fishing is an activity with rafts marked by unpredictability, poor tools, physical stress, awkward postures, risk of accidents and incidents, which contribute to insecurity in the context of activity. This study aimed to contribute to reducing of physical effort and the biomechanical impacts in jangadeiro activity of artisanal fishing using jangadas on the beach of Ponta Negra, Natal-RN. To achieve this purpose the methodology of the Work Ergonomic Analysis - WEA became a reference using techniques such as observational and interactional observation notes, photographs, videos, action conversational and listening verbalizations. The resulting activity in health jangadeiro, discussed in this research were: static postural assessment, flexibility of movement of shoulder flexion-extension, flexibility of the hamstrings and lower back, grip and musculoskeletal pain. It was found from observations, interactions and activity analysis, that in carrying out fishing rafts are frequent awkward postures associated with demand for power and many are already feeling the jangadeiros reflections of years of life dedicated to this work. These have already adopted some measures to manage the activity, such as job rotation during the expedition of capture. Therefore, there is a need to expand these measures of activity management, as well as design and capabilities of the raft, seeking positive changes in the activity and consequently the quality of life jangadeiro

Fibras de licuri: um reforço vegetal alternativo de compósitos poliméricos

This research is based, at first, on the seeking of alternatives naturals reinforced in place of polymeric composites, also named reinforced plastics. Therein, this work starts with a whole licuri fiber micro structural characterization, as alternative proposal to polymeric composites. Licuri fiber is abundant on the Bahia state flora, native from a palm tree called Syagrus Coronata (Martius) Beccari. After, it was done only licuri fiber laminar composite developing studies, in order to know its behavior when impregnated with thermofix resin. The composite was developed in laminar structure shape (plate with a single layer of reinforcement) and produced industrially. The layer of reinforcement is a fabric-fiber unidirectional of licuri up in a manual loom. Their structure was made of polyester resin ortofitálica (unsaturated) only reinforced with licuri fibers. Fiber characterization studies were based on physical chemistry properties and their constitution. It was made by tension, scanning electron microscopy (SEM), x-ray diffraction (RDX) and thermal analyses (TG and DTA) tests, besides fiber chemistry analyses. Relating their mechanical properties of strength and hardness testing, they were determined through unit axial tension test and flexion in three points. A study in order to know fiber/matrix interface effects, in the final composites results, was required. To better understand the mechanical behavior of the composite, macroscopic and microscopic optical analysis of the fracture was performed

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes