Business continuity management at Banif: Defining and selecting recovery strategies

This project aims to delineate recovery strategies for a Portuguese Bank, as a way to increase its preparedness towards unexpected disruptive events, thus avoiding an operational crisis escalation. For this purpose, Business Continuity material was studied, a risk assessment performed, a business impact analysis executed and new strategic framework for selecting strategies adopted. In the end, a set of recovery strategies were chosen that better represented the Bank’s appetite for risk, and recommendations given for future improvements.

Flood resilient housing recovery models: a theoretical case study in Maldives

Natural disasters are events that cause general and widespread destruction of the built environment and are becoming increasingly recurrent. They are a product of vulnerability and community exposure to natural hazards, generating a multitude of social, economic and cultural issues of which the loss of housing and the subsequent need for shelter is one of its major consequences. Nowadays, numerous factors contribute to increased vulnerability and exposure to natural disasters such as climate change with its impacts felt across the globe and which is currently seen as a worldwide threat to the built environment. The abandonment of disaster-affected areas can also push populations to regions where natural hazards are felt more severely. Although several actors in the post-disaster scenario provide for shelter needs and recovery programs, housing is often inadequate and unable to resist the effects of future natural hazards. Resilient housing is commonly not addressed due to the urgency in sheltering affected populations. However, by neglecting risks of exposure in construction, houses become vulnerable and are likely to be damaged or destroyed in future natural hazard events. That being said it becomes fundamental to include resilience criteria, when it comes to housing, which in turn will allow new houses to better withstand the passage of time and natural disasters, in the safest way possible. This master thesis is intended to provide guiding principles to take towards housing recovery after natural disasters, particularly in the form of flood resilient construction, considering floods are responsible for the largest number of natural disasters. To this purpose, the main structures that house affected populations were identified and analyzed in depth. After assessing the risks and damages that flood events can cause in housing, a methodology was proposed for flood resilient housing models, in which there were identified key criteria that housing should meet. The same methodology is based in the US Federal Emergency Management Agency requirements and recommendations in accordance to specific flood zones. Finally, a case study in Maldives – one of the most vulnerable countries to sea level rise resulting from climate change – has been analyzed in light of housing recovery in a post-disaster induced scenario. This analysis was carried out by using the proposed methodology with the intent of assessing the resilience of the newly built housing to floods in the aftermath of the 2004 Indian Ocean Tsunami.

EFFECT – Efficient finite element code

The theme of this dissertation is the finite element method applied to mechanical structures. A new finite element program is developed that, besides executing different types of structural analysis, also allows the calculation of the derivatives of structural performances using the continuum method of design sensitivities analysis, with the purpose of allowing, in combination with the mathematical programming algorithms found in the commercial software MATLAB, to solve structural optimization problems. The program is called EFFECT – Efficient Finite Element Code. The object-oriented programming paradigm and specifically the C ++ programming language are used for program development. The main objective of this dissertation is to design EFFECT so that it can constitute, in this stage of development, the foundation for a program with analysis capacities similar to other open source finite element programs. In this first stage, 6 elements are implemented for linear analysis: 2-dimensional truss (Truss2D), 3-dimensional truss (Truss3D), 2-dimensional beam (Beam2D), 3-dimensional beam (Beam3D), triangular shell element (Shell3Node) and quadrilateral shell element (Shell4Node). The shell elements combine two distinct elements, one for simulating the membrane behavior and the other to simulate the plate bending behavior. The non-linear analysis capability is also developed, combining the corotational formulation with the Newton-Raphson iterative method, but at this stage is only avaiable to solve problems modeled with Beam2D elements subject to large displacements and rotations, called nonlinear geometric problems. The design sensitivity analysis capability is implemented in two elements, Truss2D and Beam2D, where are included the procedures and the analytic expressions for calculating derivatives of displacements, stress and volume performances with respect to 5 different design variables types. Finally, a set of test examples were created to validate the accuracy and consistency of the result obtained from EFFECT, by comparing them with results published in the literature or obtained with the ANSYS commercial finite element code.

Electrokinetic treatment of environmental matrices. Contaminants removal and phosphorus recovery

There is a need to develop viable techniques for removal and recovery organic and inorganic compounds from environmental matrices, due to their ecotoxicity, regulatory obligations or potential supplies as secondary materials. In this dissertation, electro –removal and –recovery techniques were applied to five different contaminated environmental matrices aiming phosphorus (P) recovery and/or contaminants removal. In a first phase, the electrokinetic process (EK) was carried out in soils for (i) metalloids and (ii) organic contaminants (OCs) removal. In the case of As and Sb mine contaminated soil, the EK process was additionally coupled with phytotechnologies. In a second phase, the electrodialytic process (ED) was applied to wastes aiming P recovery and simultaneous removal of (iii) toxins from membrane concentrate, (iv) heavy metals from sewage sludge ash (SSA), and (v) OCs from sewage sludge (SS). EK enhanced phytoremediation showed to be viable for the remediation of soils contaminated with metalloids, as although remediation was low, it combines advantages of both technologies while allowing site management. EK also proved to be an effective remediation technology for the removal and degradation of emerging OCs from two types of soil. Aiming P recovery and contaminants removal, different ED cell set-ups were tested. For the membrane concentrates, the best P recovery was achieved in a three compartment (3c) cell, but the highest toxin removal was obtained in a two compartment (2c) cell, placing the matrix in the cathode end. In the case of SSA the best approach for simultaneous P recovery and heavy metals removal was to use a 2c-cell placing the matrix in the anode end. However, for simultaneous P recovery and OCs removal, SS should be placed in the cathode end, in a 2c-cell. Overall, the data support that the selection of the cell design should be done case-by-case.

Electrodialytic recovery of phosphorus and organic contaminants removal from sewage sludge

Phosphorus is a macronutrient essential to life which comes from phosphate rock, a non-renewable resource. Sewage sludge from wastewater treatment plants (WWTP) is a secondary resource rich in phosphorus that can be valorized. However, organic compounds are detected in sewage sludge, due to its non-polar and hydrophobic character, being considered an environmental risk. The present dissertation aims to study the efficiency of the electrodialytic process (ED) when applied to sewage sludge aiming phosphorus recovery and organic contaminants removal. Four organic compounds were analyzed: 17α-ethynylestradiol (EE2), bisphenol A (BPA), caffeine (Caf) and oxybenzone (MBPh). The experiments took place in an ED cell with two compartments and an anion exchange membrane, with the sludge in the cathode compartment. The experiments were carried out for three days with spiked sewage sludge (six assays). One control experiment was done without current, three experiments were carried out applying a constant current of 50, 75, and 100 mA and two experiments were carried out applying sequential currents: 50 mA, 75 mA and 100 mA and the opposite (100-75-50 mA). A qualitative and quantitative analysis of microorganisms existing in the samples was also done. At the end, the pH increased in the sewage sludge favoring phosphorus recovery. In terms of phosphorus, the highest recovery was achieved in the experiment run with 100 mA, where 70.3±2.0% of total phosphorus was recovered in the electrolyte. Generally, compounds degradation was favored by the current. Caf and MBPh achieved degradation percentages of 96.2±0.2% and 84.8±1.3%, respectively, in 100 mA assay. EE2 (83.1±1.7%) and BPA (91.8±4.6%) degradations were favored by 50 mA current. A total of 35 taxa from four different groups were identified, totalizing between 81,600-273,000 individuals per gram of initial sludges. After ED, microbial community population decreased between 47-98%. Arcella gibbosa represented 61% of the total observed organisms and revealed to be more tolerant to medium changes.

Further results on the inverse along an element in semigroups and rings

In this paper, we introduce a new notion in a semigroup $S$ as an extension of Mary's inverse. Let $a,d\in S$. An element $a$ is called left (resp. right) invertible along $d$ if there exists $b\in S$ such that $bad=d$ (resp. $dab=b$) and $b\leq_\mathcal{L}d$ (resp. $b\leq_\mathcal{R}d$). An existence criterion of this type inverse is derived. Moreover, several characterizations of left (right) regularity, left (right) $\pi$-regularity and left (right) $*$-regularity are given in a semigroup. Further, another existence criterion of this type inverse is given by means of a left (right) invertibility of certain elements in a ring. Finally we study the (left, right) inverse along a product in a ring, and, as an application, Mary's inverse along a matrix is expressed.

Development of procedures for the design, optimization and manufacturing of customized orthopaedic and trauma implants: Geometrical/anatomical modelling from 3D medical imaging

Tese de Doutoramento (Programa Doutoral em Engenharia Biomédica)

Reforço de ligações tradicionais de madeira

Dissertação de mestrado integrado em Engenharia Civil

Polyphenols and sugars recovery from autohydrolysis of pineapple waste

[Excerpt] The aim of this research was to evaluate the influence of temperature, time and mass/ volume ratio on the release of sugars and polyphenols using an autohydrolysis procedure from pineapple waste. A Box-Bhenken design was used with three factors (time, temperature and mass/volume ratio) and three levels was used. All treatments were performed in triplicate. Nine central points were used. For autohydrlosysis treatments, an oil bath was used [1]. After autohydrolysis, liquid phases or hydrolysates were analyzed for glucose and fructose concentration by high performance liquid chromatography (HPLC) [2]. The FolinCiocalteu assay was used to measure total polyphenols of hydrolysates [3] and HPLC to identify these molecules [4]. (...)

Diseño y evaluación de alternativas de manejo sustentable para la recuperación y conservación de bosques degradados de la región del Espinal en la provincia de Córdoba. Design and evaluation of sustainable management alternatives for the recovery and conservation of degraded forest in the Espinal Region in Córdoba province.

El avance de la frontera agropecuaria y la urbanización han reducido la superficie boscosa del Espinal en Córdoba a fragmentos que son sumamente valiosos como relictos del ambiente original del Algarrobal y como barreras frente a la acción erosiva del agua y los vientos. Por su estructura, degradada y enmarañada, el productor agropecuario generalmente los visualiza como una molestia ya que le restan superficie apta para el cultivo y resultan poco aprovechables para el pastoreo de los animales. Bajo pautas de manejo adecuadas estos bosquecillos podrían rehabilitarse para el aprovechamiento del ganado y otros usos complementarios. Para que el productor local cuente con herramientas de manejo sustentable de sus recursos naturales es necesario generar información confiable para la zona. En ese contexto, se plantea la siguiente Hipótesis General: Existen alternativas de manejo que, aplicadas sobre los bosques del Espinal, permiten recuperar y conservar la biodiversidad a la vez que mejoran la rentabilidad del productor. El Objetivo General es diseñar y evaluar, en términos ecológicos, tecnológicos y socio-económicos, alternativas de manejo sustentable de bosques degradados del Espinal de la provincia de Córdoba tendientes a su recuperación y conservación. El proyecto se localizará en el bosque fragmentado del Campo Escuela de la FCA-UNC. Se establecerán parcelas con distintos niveles de cobertura arbustiva en las que se medirán el efecto de los arbustos sobre la regeneración de especies arbóreas deseables, la producción y calidad de la pastura, el crecimiento de los árboles y las condiciones edáficas del sistema. Además, la incidencia del ganado vacuno sobre la regeneración de especies arbóreas deseables, la riqueza y abundancia de especies forrajeras deseables y las condiciones edáficas del sistema. Se hará enriquecimiento con plantines de tres especies de Prosopis tanto en el bosque con distintos anchos de fajas como en suelo desmontado, para evaluar su comportamiento. También se probará la diseminación y establecimiento posterior de estas especies por medio de la ingesta del ganado vacuno. Se relevarán especies medicinales, aromáticas, melíferas, tintóreas y ornamentales nativas, y se las valorará económicamente según su uso actual y potencial en esta y otras zonas de la provincia y el país. Se efectuará la caracterización socio-económica y ambiental del área circundante al Campo Escuela y mediante encuestas se determinará el grado de valorización del bosque que tienen los pobladores zonales. Se realizará el análisis económico y financiero del sistema propuesto versus el sistema sin proyecto, considerando bienes producidos y servicios ambientales del bosque y se socializará el proyecto a través de encuestas y reuniones participativas con los productores zonales. Para el análisis de toda la información se usará el software INFOSTAT 2007. Se harán tablas y gráficos de estadística descriptiva para visualizar la distribución de datos. Se usará análisis de correlación, análisis de regresión lineal múltiple, ANAVA y test a posteriori. Se espera generar pautas preliminares de manejo, sencillas y económicas, fácilmente adoptables por los productores de la región, que aseguren la persistencia de estos fragmentos boscosos, relictos de la vegetación original del Espinal.

Numerical simulations of Lamb waves in plates using a semi-analytical finite element method

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2011

Synaptic plasticity in mature cultured hippocampal-entorhinal cortex slices : activity-dependent regulation of cAMP response-element binding protein

LTP, synaptic plasticity, hippocampus, organotypic cultures, CREB

Models and methods for supporting lot sizing decisions in product recovery systems

Magdeburg, Univ., Fak. für Wirtschaftswiss., Diss., 2011

Infarct Size as Predictor of Systolic Functional Recovery after Myocardial Infarction

Background: The effects of modern therapy on functional recovery after acute myocardial infarction (AMI) are unknown.Objectives:To evaluate the predictors of systolic functional recovery after anterior wall AMI in patients undergoing modern therapy (reperfusion, aggressive platelet antiaggregant therapy, angiotensin-converting enzyme inhibitors and beta-blockers).Methods:A total of 94 consecutive patients with AMI with ST-segment elevation were enrolled. Echocardiograms were performed during the in-hospital phase and after 6 months. Systolic dysfunction was defined as ejection fraction value < 50%.Results:In the initial echocardiogram, 64% of patients had systolic dysfunction. Patients with ventricular dysfunction had greater infarct size, assessed by the measurement of total and isoenzyme MB creatine kinase enzymes, than patients without dysfunction. Additionally, 24.5% of patients that initially had systolic dysfunction showed recovery within 6 months after AMI. Patients who recovered ventricular function had smaller infarct sizes, but larger values of ejection fraction and E-wave deceleration time than patients without recovery. At the multivariate analysis, it can be observed that infarct size was the only independent predictor of functional recovery after 6 months of AMI when adjusted for age, gender, ejection fraction and E-wave deceleration time.Conclusion: In spite of aggressive treatment, systolic ventricular dysfunction remains a frequent event after the anterior wall myocardial infarction. Additionally, 25% of patients show functional recovery. Finally, infarct size was the only significant predictor of functional recovery after six months of acute myocardial infarction.