Surfactant-Mediated Synthesis of Functional Metal Oxide Nanostructures Via Microwave Irradiation-Assisted Chemical Synthesis

In the present work we report a rapid microwave irradiation-assisted chemical synthesis technique for the growth of nanoparticles, nanorods, and nanotubes of a variety of metal oxides in the presence of an appropriate surfactant (cationic, anionic, non ionic and polymeric), without the use of any templates. The method is simple, inexpensive, and helps one to prepare nanostructures in quick time, measured in seconds and minutes. This method has been applied successfully to synthesize nanostructures of a variety of binary and ternary metal oxides such as ZnO, CdO, Fe2O3, CuO, Ga2O3, Gd2O3, ZnFe2O4, etc. There is an observed variation in the morphology of the nanostructures with changes in different process parameters, such as microwave power, irradiation time, identity of solvent, type of surfactant, and its concentration.

Outcome of singleton pregnancy after assisted reproductive treatment

Singleton pregnancies achieved by means of assisted reproductive treatment (ART) are associated with increased obstetric and neonatal risks in comparison with spontaneously conceived singleton pregnancies. The impact of infertility- and treatment-related factors on these risks is not properly understood. In addition, the psychological effects of infertility and its treatment on the experience of pregnancy have scarcely been studied. Thus, the aim of the present study was to evaluate the importance of infertility- and treatment-related factors on prediction of pregnancy outcome, obstetric and neonatal risks, fear-of-childbirth and pregnancy-related anxiety. The subjects consisted of infertile women who achieved a singleton pregnancy by means of in vitro fertilisation (IVF) or intracytoplasmic sperm injection (ICSI). The control groups comprised spontaneously conceiving women with singleton gestations. Early pregnancy outcome was assessed by means of assay of serum human chorionic gonadoptrophin (hCG) in single samples. Other outcome data were collected from patient records, national Health Registers and via prospective questionnaire surveys. Viable pregnancies were associated with significantly higher serum hCG levels 12 days after embryo transfer than non-viable pregnancies. Among singleton pregnancies, aetiological subgroup, treatment type or the number of transferred embryos did not impair the predictive value of single hCG assessment. According to the register-based data, age-, parity- and socioeconomic status- adjusted risks of gestational hypertension, preterm contractions and placenta praevia were more frequent in the ART pregnancies than in the control pregnancies. Significantly higher rates of induction of delivery and Caesarean section occurred in the ART group than in the control group. The risks of preterm birth and low birth weight (LBW) were increased after ART pregnancy. Duration or aetiology of infertility, treatment type (fresh or frozen IVF or ICSI) or rank of treatment did not contribute to the risks of preterm birth or LBW. In addition, the risks of preterm birth and LBW remained elevated in spite of of the number of transferred embryos. Although mean duration of pregnancy was shorter and mean birth weight lower in the ART pregnancies than in the control pregnancies, these differences were hardly of clinical significance. Fear-of-childbirth and pregnancy-related anxiety were equally common to women conceiving by means of ART, or spontaneously. Partnership of five to ten years appeared to be protective as regards severe fear-of-childbirth, whereas long preceding infertility (≥ seven years) had the opposite effect. In conclusion, an early hCG assessment maintained its good predictive value regardless of infertility- or patient-related factors. Further, we did not recognise any infertility- or patient-related factors that would expose infertile women to increased obstetric or neonatal risks. However, a long period of infertility was associated with severe fear-of-childbirth.

CD4+ alpha beta T cell and gamma delta T cell responses to Mycobacterium tuberculosis. Similarities and differences in Ag recognition, cytotoxic effector function, and cytokine production.

CD4+ and gamma delta T cells are activated readily by Mycobacterium tuberculosis. To examine their role in the human immune response to M. tuberculosis, CD4+ and gamma delta T cells from healthy tuberculin-positive donor were studied for patterns of Ag recognition, cytotoxicity, and cytokine production in response to M. tuberculosis-infected mononuclear phagocytes. Both T cell subsets responded to intact M. tuberculosis and its cytosolic Ags. However, CD4+ and gamma delta T cells differed in the range of cytosolic Ags recognized: reactivity to a wide m.w. range of Ags for CD4+ T cells, and a restricted pattern for gamma delta T cells, with dominance of Ags of 10 to 15 kDa. Both T cell subsets were equally cytotoxic for M. tuberculosis-infected monocytes. Furthermore, both CD4+ and gamma delta T cells produced large amounts of IFN-gamma: mean pg/ml of IFN-gamma in supernatants was 2458 +/- 213 for CD4+ and 2349 +/- 245 for gamma delta T cells. By filter-spot ELISA (ELISPOT), the frequency of IFN-gamma-secreting gamma delta T cells was one-half of that of CD4+ T cells in response to M. tuberculosis, suggesting that gamma delta T cells on a per cell basis were more efficient producers of IFN-gamma than CD4+ T cells. In contrast, CD4+ T cells produced more IL-2 than gamma delta T cells, which correlated with diminished T cell proliferation of gamma delta T cells compared with CD4+ T cells. These results indicate that CD4+ and gamma delta T cell subsets have similar effector functions (cytotoxicity, IFN-gamma production) in response to M. tuberculosis-infected macrophages, despite differences in the Ags recognized, IL-2 production, and efficiency of IFN-gamma production.

Compiler-assisted instruction decoder energy optimization for clustered VLIW architectures

Traditionally, an instruction decoder is designed as a monolithic structure that inhibit the leakage energy optimization. In this paper, we consider a split instruction decoder that enable the leakage energy optimization. We also propose a compiler scheduling algorithm that exploits instruction slack to increase the simultaneous active and idle duration in instruction decoder. The proposed compiler-assisted scheme obtains a further 14.5% reduction of energy consumption of instruction decoder over a hardware-only scheme for a VLIW architecture. The benefits are 17.3% and 18.7% in the context of a 2-clustered and a 4-clustered VLIW architecture respectively.

Highly biocompatible and water-dispersible, amine functionalized magnetite nanoparticles, prepared by a low temperature, air-assisted polyol process: a new platform for bio-separation and diagnostics

A low temperature polyol process, based on glycolaldehyde mediated partial reduction of FeCl3 center dot 6H(2)O at 120 degrees C in the presence of sodium acetate as an alkali source and 2,2'-(ethylenedioxy)-bis-(ethylamine) as an electrostatic stabilizer has been used for the gram-scale preparation of biocompatible, water-dispersible, amine functionalized magnetite nanoparticles (MNPs) with an average diameter of 6 +/- 0.75 nm. With a reasonably high magnetization (37.8 e.m.u.) and amine groups on the outer surface of the nanoparticles, we demonstrated the magnetic separation and concentration implications of these ultrasmall particles in immunoassay. MRI studies indicated that these nanoparticles had the desired relaxivity for T-2 contrast enhancement in vivo. In vitro biocompatibility, cell uptake and MR imaging studies established that these nanoparticles were safe in clinical dosages and by virtue of their ultrasmall sizes and positively charged surfaces could be easily internalized by cancer cells. All these positive attributes make these functional nanoparticles a promising platform for further in vitro and in vivo evaluations.

Transition to parenthood after assisted reproductive treatment: Follow-up study of singleton pregnancies

Infertility treatments are relatively easily available in most Western countries today, but the psychological consequences of these high-tech treatments have scarcely been addressed. The purpose of this controlled longitudinal study was to explore the early environment of the infant born by assisted reproductive treatment (ART). We focused on the parents mental well-being, marital relations and experience of parenting. In addition to this, we assessed parent child interaction and parents mental representations of their child after long-standing infertility and several unsuccessful ART attempts. The subjects were infertile couples who achieved a singleton pregnancy by in vitro fertilization (IVF) or intracytoplasmic sperm injection (ICSI). The control group comprised of spontaneously conceiving couples with singleton pregnancies. ART women showed fewer depressive symptoms than controls during pregnancy and after delivery, but the difference vanished by the end of the child s first year. ART men consistently had lower levels of anxiety symptoms, sleeping difficulties, and social dysfunction than control men. Control women experienced a decrease in dyadic consensus during the child s first year, which did not happen among ART women. After the child was born, ART men reported a higher level of sexual affection compared with control men. Psychic symptoms and stressful life events were differently related to marital relations in ART and control groups. The parenting experiences of ART mothers were in general at a higher level, compared with controls, and they changed in a positive direction during the child s first year. Fathering experiences were at the same level in both groups, and they changed positively in both groups by the end of the child s first year. The parenting experiences of ART mothers and fathers were more resilient to certain child-related stressors than those of control group. Both mothers and fathers with long-term infertility showed more sensitive behaviour with their child in toddler-age than in infancy. Correspondingly, children s cooperation increased. Mothers often mentioned a fear of miscarriage and difficulty in creating representations of the child during pregnancy. Descriptions of the infants were mainly rich, vivid and loaded with positive features. In conclusion, ART parents in general seem to adapt well to the transition to parenthood. Former infertility and ART do not seem to constitute a risk for parents mental health, marital relations or experience of parenting. Even longstanding infertility with several unsuccessful treatment attempts did not create a risk as regards parenting behaviour or parents mental representations of their child. In this group, however, women were found to have fear for losing the child and difficulty in creating representations of the child during pregnancy, which in some cases may indicate need for psychosocial support. Even though our results are encouraging, infertility and infertility treatments are generally considered as a stressful experience. It is a challenge for health authorities to recognize those couples who need professional help to overcome the distressing experiences of infertility and ART.

Microwave-Assisted Synthesis of NiO Nanoparticles

NiO has been synthesized by microwave-induced chemical synthesis route using metalorganic complex of nickel in a domestic-type microwave oven (2.45 GHz). A novel metalorganic complex of nickel, viz., a beta-ketoester of nickel, synthesized and characterized as apart of this work, was employed as the precursor material. We varied the experimental parameters, such as the choice of solvent and microwave power, to obtain nanoparticles of NiO. The NiO nanoparticles were characterized by XRD, SEM, and TEM. The particle size of the NiO was found to vary from 7-40 nm. The magnetic behavior of the nanoparticles of NiO was examined with a vibrating sample magnetometer, revealing that as the particle size diminishes, the magnetic ordering in NiO changes, leading to a small, measurable coercivity.

Polymer assisted hydroxyapatite microspheres suitable for biomedical application

Hollow Microspheres of hydroxyapatite-polymer composite can be used as carriers in drug delivery and fillers in tissue engineering. Based on the concept of soft chemistry, a battery of technique is available in the literature to synthesize hollow microspheres, however, an economically viable synthesis route, having good control over the microarchitect and easy to be scaled up, is yet to be developed. Polymer matrix mediated synthesis of inorganic nanoparticles is known to synthesize nanoparticles with controlled morphology and dimensions. It is termed as biomimetic synthesis. Integrating the biomimetic synthesis of nano-particles and spray drying techniques, a novel process of producing hydroxyapatite-polymer composite hollow microspheres is briefly discussed here.

Pollinator limitation and the effect of breeding systems on plant reproduction in forest fragments

Reproduction of plants in fragmented habitats may be limited because of lower diversity or abundance of pollinators, and/or variation in local plant density. We assessed natural fruit set and pollinator limitation in ten species of woody plants in natural and restored fragments in the Pondicherry region of southern India, to see whether breeding system of plants (self-compatible and self-incompatible) affected fruit set. We tested whether the number of flowering individuals in the fragments affected the fruit set and further examined the adult and sapling densities of self-compatible (SC) and self-incompatible (SI) species. We measured the natural level of fruit set and pollinator limitation (calculated as the difference in fruit set between hand cross-pollinated and naturally pollinated flowers). Our results demonstrate that there was a higher level of pollinator limitation and hence lower levels of natural fruit set in self-incompatible species as compared to self-compatible species. However, the hand cross-pollinated flowers in SC and SI species produced similar levels of fruit set,further indicating that lower fruit set was due to pollinator limitation and not due to lack of cross-compatible individuals in the fragments. There was no significant relation between number of flowering individuals and the levels of natural fruit set, except for two species Derris ovalifolia, Ixora pavetta. In these species the natural fruit set decreased with increasing population size, again indicating pollinator limitation. The adult and sapling densities in self-compatible species were significantly higher than inself-incompatible species. These findings indicate that the low reproductive output in self-incompatible species may eventually lead to lower population sizes. Restoration of pollinator services along with plant species in fragmented habitats is important for the long-term conservation of biodiversity. (C) 2009 Elsevier Masson SAS. All rights reserved.

Template-Assisted Sol-Gel Synthesis of Nanocrystalline BaTiO3

Nanocrystalline perovskite barium titanate with an average particle size less than similar to 10 nm is produced using sol-gel route involving ligand-assisted templating. BaTiO3 is obtained by the controlled hydrolysis and condensation reaction of barium acetate (Ba(CH3COO)(2)) with titanium tetra chloride (TiCl4) in the reverse micelles of dodecylamine (DDA) which is used as the template. Our attempts to produce mesoporous BaTiO3 have resulted in the formation of nanocrystalline BaTiO3. The synthesis of nanostructured BaTiO3 is carried out using the ligand-assisted templating approach which proceeds through the sol-gel route. Dodecylamine is used as the template. The sol-gel process in general presents inherent advantages because the nanostructure of the desired materials can be controlled together with their porous structure. Ligand-assisted templating approach involves the formation of covalent bond between the inorganic analogue and the template. Ba(CH3COO)(2) and TiCl4 are used as barium-source and titanium-source respectively. The reaction between Ba(CH3COO)(2) and TiCl4 is found to take place deliberately on the pre-assembled species which acts as the template or occurring with in them which in turn will lead to the generation of the desired nanoscale structure (nanopores or nanoparticles).

Elastic property estimation using Ultrasound Assisted Optical Elastography through Remote Palpation - A simulation study - art. no. 61640Q

We propose an effective elastography technique in which an acoustic radiation force is used for remote palpation to generate localized tissue displacements, which are directly correlated to localized variations of tissue stiffness and are measured using a light probe in the same direction of ultrasound propagation. The experimental geometry has provision to input light beam along the ultrasound propagation direction, and hence it can be prealigned to ensure proper interception of the focal region by the light beam. Tissue-mimicking phantoms with homogeneous and isotropic mechanical properties of normal and malignant breast tissue are considered for the study. Each phantom is insonified by a focusing ultrasound transducer (1 MHz). The focal volume of the transducer and the ultrasound radiation force in the region are estimated through solving acoustic wave propagation through medium assuming average acoustic properties. The forward elastography problem is solved for the region of insonification assuming the Lame's parameters and Poisson's ratio, under Dirichlet boundary conditions which gives a distribution of displacement vectors. The direction of displacement, though presented spatial variation, is predominantly towards the ultrasound propagation direction. Using Monte Carlo (MC) simulation we have traced the photons through the phantom and collected the photons arriving at the detector on the boundary of the object in the direction of ultrasound. The intensity correlations are then computed from detected photons. The intensity correlation function computed through MC simulation showed a modulation whose strength is found to be proportional to the amplitude of displacement and inversely related to the storage (elastic) modulus. It is observed that when the storage modulus in the focal region is increased the computed displacement magnitude, as indicated by the depth of modulation in the intensity autocorrelation, decreased and the trend is approximately exponential.

Hydrogel-assisted synthesis of nanotubes and nanorods of US, ZnS and CuS, showing some evidence for oriented attachment

By carrying out the reaction of appropriate metal compounds with Na2S in the presence of a tripodal cholamide-based hydrogel, nanotubes and nanorods of CdS, ZnS and CuS have been obtained. The nanostructures have been characterized by transmission electron microscopy and spectroscopic techniques. Evidence is presented for the assembly of short nanorods to form one-dimensional chains.