Effect of high-affinity anti-Pseudomonas aeruginosa lipopolysaccharide antibodies induced by immunization on the rate of Pseudomonas aeruginosa infection in patients with cystic fibrosis

Patients with cystic fibrosis (CF; N = 26) and with no prior history of infection with Pseudomonas aeruginosa were immunized with an octavalent O-polysaccharide-toxin A conjugate vaccine. During the next 4 years, 16 patients (61.5%) remained free of infection and 10 (38.5%) became infected. Total serum antilipopolysaccharide (LPS) antibody levels induced by immunization were comparable in infected and noninfected patients. In contrast, 12 of 16 noninfected versus 3 of 10 infected patients (p = 0.024) mounted and maintained a high-affinity anti-LPS antibody response. When compared retrospectively with the rate in a group of age- and gender-matched, nonimmunized, noncolonized patients with CF, the rate at which P. aeruginosa infections were acquired was significantly lower (p < or = 0.02) among all immunized versus nonimmunized patients during the first 2 years of observation. Subsequently, only those immunized patients who maintained a high-affinity anti-LPS antibody response had a significant reduction (p < or = 0.014) in the rate of infection during years 3 and 4. Smooth, typeable strains of P. aeruginosa predominated among immunized patients; rough, nontypeable strains were most frequently isolated from nonimmunized patients. Mucoid variants were isolated from one immunized patient versus six nonimmunized patients. These results indicate that the induction of a high-affinity P. aeruginosa anti-LPS antibody response can influence the rate of infection in patients with CF.

Verfahren und Anlage zum automatisierten Kommissionieren von in Beuteln verpackten Gütern

Automatisiertes Kommissionieren von biegeschlaffen Teilen stellt seit jeher ein besonderes Problem für die Handhabungstechnik dar, und es sind bisher verschiedenartigste sondermaschinenbauliche Lösungen hervorgebracht worden. Auch für das Kommissionieren von in Folien verpackten Artikeln gibt es einige L��sungen. Diese sind aber hinsichtlich ihrer Anwendung für in Beuteln verpackte Güter eingeschränkt. Ein neuartiges, am Fraunhofer-IML entwickeltes Verfahren verspricht Abhilfe. Der folgende Beitrag stellt dieses Verfahren im Detail vor und zeigt vergangene und zukünftige Untersuchungsfelder auf, die im Rahmen der Entwicklung bearbeitet wurden bzw. werden und sich insbesondere mit der Dimensionierung der Gerätschaften und Hilfsmittel beschäftigen.

Distributed Control Nodes for Material Flow System Controls on the Example of Unit Load Conveyor and Sorter Facilities

The Chair of Transportation and Ware-housing at the University of Dortmund together with its industrial partner has developed and implemented a decentralized control system based on embedded technology and Internet standards. This innovative, highly flexible system uses autonomous software modules to control the flow of unit loads in real-time. The system is integrated into Chair’s test facility consisting of a wide range of conveying and sorting equipment. It is built for proof of concept purposes and will be used for further research in the fields of decentralized automation and embedded controls. This presentation describes the implementation of this decentralized control system.

Calculation of the average travel distance in a low-level picker-to-part system considering any distribution function within the aisles

The estimation of the average travel distance in a low-level picker-to-part order picking system can be done by analytical methods in most cases. Often a uniform distribution of the access frequency over all bin locations is assumed in the storage system. This only applies if the bin location assignment is done randomly. If the access frequency of the articles is considered in the bin location assignment to reduce the average total travel distance of the picker, the access frequency over the bin locations of one aisle can be approximated by an exponential density function or any similar density function. All known calculation methods assume that the average number of orderlines per order is greater than the number of aisles of the storage system. In case of small orders this assumption is often invalid. This paper shows a new approach for calculating the average total travel distance taking into account that the average number of orderlines per order is lower than the total number of aisles in the storage system and the access frequency over the bin locations of an aisle can be approximated by any density function.

Leistungsbewertung und -optimierung in der manuellen Kommissionierung

In der Auftragszusammenstellung spielt der Mensch u. a. aufgrund seiner hohen Flexibilität bezüglich der Aufgabeneinteilung und der Fähigkeit, unterschiedlich dimensionierte Objekte leicht handzuhaben eine wesentliche Rolle. Um die Leistungen der Mitarbeiter individuell beurteilen zu können, ist die Berücksichtigung heterogener Arbeitsinhalte notwendig. Beispielsweise ist anzunehmen, dass Kommissionieraufträge mit relativ schweren Artikeln mehr Zeit in Anspruch nehmen als Aufträge mit leichteren Artikeln. Ebenso nimmt der Kommissionieraufwand zu, wenn mehr Auftragspositionen anzufahren sind und wenn größere Distanzen zurückgelegt werden müssen. Durch die Quantifizierung solcher Leistungseinflussfaktoren auf Mitarbeiterebene können individuelle Leistungsprofile erstellt werden, aus denen ganzheitliche Leistungsbeurteilungen sowie Optimierungen in der Personaleinsatzplanung und Kommissionierauftragssteuerung hervorgehen.

Learning Curves of Temporary Workers in Manual Order Picking Activities

Person-to-stock order picking is highly flexible and requires minimal investment costs in comparison to automated picking solutions. For these reasons, tradi-tional picking is widespread in distribution and production logistics. Due to its typically large proportion of manual activities, picking causes the highest operative personnel costs of all intralogistics process. The required personnel capacity in picking varies short- and mid-term due to capacity requirement fluctuations. These dynamics are often balanced by employing minimal permanent staff and using seasonal help when needed. The resulting high personnel fluctuation necessitates the frequent training of new pickers, which, in combination with in-creasingly complex work contents, highlights the im-portance of learning processes in picking. In industrial settings, learning is often quantified based on diminishing processing time and cost requirements with increasing experience. The best-known industrial learning curve models include those from Wright, de Jong, Baloff and Crossman, which are typically applied to the learning effects of an entire work crew rather than of individuals. These models have been validated in largely static work environments with homogeneous work contents. Little is known of learning effects in picking systems. Here, work contents are heterogeneous and individual work strategies vary among employees. A mix of temporary and steady employees with varying degrees of experience necessitates the observation of individual learning curves. In this paper, the individual picking performance development of temporary employees is analyzed and compared to that of steady employees in the same working environment.

Maternal and neonatal outcomes by labor onset type and gestational age.

OBJECTIVE: We sought to determine maternal and neonatal outcomes by labor onset type and gestational age. STUDY DESIGN: We used electronic medical records data from 10 US institutions in the Consortium on Safe Labor on 115,528 deliveries from 2002 through 2008. Deliveries were divided by labor onset type (spontaneous, elective induction, indicated induction, unlabored cesarean). Neonatal and maternal outcomes were calculated by labor onset type and gestational age. RESULTS: Neonatal intensive care unit admissions and sepsis improved with each week of gestational age until 39 weeks (P < .001). After adjusting for complications, elective induction of labor was associated with a lower risk of ventilator use (odds ratio [OR], 0.38; 95% confidence interval [CI], 0.28-0.53), sepsis (OR, 0.36; 95% CI, 0.26-0.49), and neonatal intensive care unit admissions (OR, 0.52; 95% CI, 0.48-0.57) compared to spontaneous labor. The relative risk of hysterectomy at term was 3.21 (95% CI, 1.08-9.54) with elective induction, 1.16 (95% CI, 0.24-5.58) with indicated induction, and 6.57 (95% CI, 1.78-24.30) with cesarean without labor compared to spontaneous labor. CONCLUSION: Some neonatal outcomes improved until 39 weeks. Babies born with elective induction are associated with better neonatal outcomes compared to spontaneous labor. Elective induction may be associated with an increased hysterectomy risk.

Structural equation modeling of the medical outcome study: Short Form 36 (SF-36)

The factorial validity of the SF-36 was evaluated using confirmatory factor analysis (CFA) methods, structural equation modeling (SEM), and multigroup structural equation modeling (MSEM). First, the measurement and structural model of the hypothesized SF-36 was explicated. Second, the model was tested for the validity of a second-order factorial structure, upon evidence of model misfit, determined the best-fitting model, and tested the validity of the best-fitting model on a second random sample from the same population. Third, the best-fitting model was tested for invariance of the factorial structure across race, age, and educational subgroups using MSEM.^ The findings support the second-order factorial structure of the SF-36 as proposed by Ware and Sherbourne (1992). However, the results suggest that: (a) Mental Health and Physical Health covary; (b) general mental health cross-loads onto Physical Health; (c) general health perception loads onto Mental Health instead of Physical Health; (d) many of the error terms are correlated; and (e) the physical function scale is not reliable across these two samples. This hierarchical factor pattern was replicated across both samples of health care workers, suggesting that the post hoc model fitting was not data specific. Subgroup analysis suggests that the physical function scale is not reliable across the "age" or "education" subgroups and that the general mental health scale path from Mental Health is not reliable across the "white/nonwhite" or "education" subgroups.^ The importance of this study is in the use of SEM and MSEM in evaluating sample data from the use of the SF-36. These methods are uniquely suited to the analysis of latent variable structures and are widely used in other fields. The use of latent variable models for self reported outcome measures has become widespread, and should now be applied to medical outcomes research. Invariance testing is superior to mean scores or summary scores when evaluating differences between groups. From a practical, as well as, psychometric perspective, it seems imperative that construct validity research related to the SF-36 establish whether this same hierarchical structure and invariance holds for other populations.^ This project is presented as three articles to be submitted for publication. ^

Bai uns jiden : zamelbuch for folklor un filologie

redegirṭ fun M. Wonwild

Šurek-buch : gedenk-bleṭer oifn keiver fun a ḥaver un frainṭ

Digitalisat der Ausg. Warše, 1921

Fun Balfur biz Samiuel : (2 deklaratzies)

Avraham Rewutzki

Di šul-frage : redes fun di j[udiše] s[otzialisṭiše] a[rbeiṭer] p[arṭei] (P"Tz) raṭmener in lodzer šṭodṭ-raṭ, gehalṭen be-es di biudzšeṭ-debaṭen in nowember 1917

Digitalisat der Ausg. Warše [u.a.], 1920