Vibrations in Rotating Machinery Arising from Minor Imperfections in Component Geometries

Vibrations in machines can cause noise, decrease the performance, or even damage the machine. Vibrations appear if there is a source of vibration that excites the system. In the worst case scenario, the excitation frequency coincides with the natural frequency of the machine causing resonance. Rotating machines are a machine type, where the excitation arises from the machine itself. The excitation originates from the mass imbalance in the rotating shaft, which always exists in machines that are manufactured using conventional methods. The excitation has a frequency that is dependent on the rotational speed of the machine. The rotating machines in industrial use are usually designed to rotate at a constant rotational speed, the case where the resonances can be easily avoided. However, the machines that have a varying operational speed are more problematic due to a wider range of frequencies that have to be avoided. Vibrations, which frequencies equal to rotational speed frequency of the machine are widely studied and considered in the typical machine design process. This study concentrates on vibrations, which arise from the excitations having frequencies that are multiples of the rotational speed frequency. These vibrations take place when there are two or more excitation components in a revolution of a rotating shaft. The dissertation introduces four studies where three kinds of machines are experiencing vibrations caused by different excitations. The first studied case is a directly driven permanent magnet generator used in a wind power plant. The electromagnetic properties of the generator cause harmonic excitations in the system. The dynamic responses of the generator are studied using the multibody dynamics formulation. In another study, the finite element method is used to study the vibrations of a magnetic gear due to excitations, which frequencies equal to the rotational speed frequency. The objective is to study the effects of manufacturing and assembling inaccuracies. Particularly, the eccentricity of the rotating part with respect to non-rotating part is studied since the eccentric operation causes a force component in the direction of the shortest air gap. The third machine type is a tube roll of a paper machine, which is studied while the tube roll is supported using two different structures. These cases are studied using different formulations. In the first case, the tube roll is supported by spherical roller bearings, which have some wavinesses on the rolling surfaces. Wavinesses cause excitations to the tube roll, which starts to resonate at the frequency that is a half of the first natural frequency. The frequency is in the range where the machine normally operates. The tube roll is modeled using the finite element method and the bearings are modeled as nonlinear forces between the tube roll and the pedestals. In the second case studied, the tube roll is supported by freely rotating discs, which wavinesses are also measured. The above described phenomenon is captured as well in this case, but the simulation methodology is based on the flexible multibody dynamics formulation. The simulation models that are used in both of the last two cases studied are verified by measuring the actual devices and comparing the simulated and measured results. The results show good agreement.

Overexpression of kermit/dGIPC is associated with lethality in Drosophila melanogaster

Insertional mutagenesis is an important tool for functional genomics in Drosophila melanogaster. The insertion site in the KG00562 mutant fly line has been mapped to the CG8709 (herein named DmLpin) locus and to the 3’ of kermit (also called dGIPC). This mutant line presents a high lethality rate resulting from a gain of function. To obtain some insight into the biological role of the mutated locus, we have characterized the mutation and its relation to the high mortality of the KG00562 fly line. In this mutant, we did not detect one of the DmLpin transcripts, namely DmLpinK, but we did detect an unusual 2.3-kb mRNA (LpinK-w). Further investigation revealed that the LpinK-w transcript results from an aberrant splicing between the untranslated first exon of DmLpinK and the mini-white marker gene. Lack of DmLpinK or LpinK-w expression does not contribute to lethality, since heterozygous KG00562/Def7860 animals presented lethality rates comparable to those of the wild type. In contrast, the overexpression of kermit was associated with lethality of the KG00562 fly line. Significantly higher levels of kermit were detected in the Malpighian tubules of KG00562/+ flies that presented higher lethality rates than wild-type or KG00562/Def7860 animals, in which the lethality was rescued. In agreement with a recently reported study, our data support the hypothesis that misexpression of kermit/dGIPC could interfere with Drosophila development, with further investigations being needed in this direction.

Mercosul: o dilema entre união aduaneira e área de livre-comércio

Mercosur: the dilemma between the customs union and a free trade area. In 2001, the government of Argentina - facing a major economic crisis - took a rather controversial decision and reduced the tariff rates of all capital goods to zero. This became a main source of conflict with Brazil, the only country of Mercosur that produces such goods. This paper discusses two possible scenarios for the resolution of this issue. In the first one, the countries would opt for the maintenance of the customs union. The authors present some suggestions for the rebuilding of the Common External Tariff (CET), by which the countries would take a middle course acceptable to all. The other possible outcome would be a step back in the direction of a free trade area, with no CET at all.

An examination of the mediation process as it is used to resolve sexual harassment complaints in Canadian universities /

The ways in which the process of mediation affected those involved in the resolution of sexual harassment complaints in Canadian universities were explored. Questionnaires were sent to forty- six Canadian universities and interviews were conducted with fifteen advisors. An analysis of the twenty- two questionnaires returned indicated that mediation was utilized in 11% of the sexual harassment complaints and effected a successful resolution in 67% of these. Both complainants and those con^lained against were reported to have spoken more favourably than unfavourably about the process and outcome of mediation. Questionnaire respondents in general found mediation a slightly less than satisfactory method of complaint resolution. Those respondents who had successfully used mediation; however, describe its usefulness within a university context.

Drift dispersal in central Southern Ontario /

Two tills are readily identi-f i able in central Southern Ontario, a very stony, loose deposit o-f variable matrix (Dummer till) and a moderately stony, fissile and compact deposit that is more homogeneous (drumlinized till). The quantity o-f Precambr i an, Paleozoic and Shadow Lake Formation (Paleozoic) rock types were determined and corresponding isopleth maps drawn. The changes in lithology content occurred in the direction o-f transport, there-fore, compositional isopleths o-f till may be considered equipotential lines for the reconstruction of glacier flow paths. Areal gradations of drift lithology indicated that the prime agents of dispersal were ice and glacial meltwaters. The down-ice abundance trend of till components indicated a dispersal pattern showing the concentration of a given lithology type peaking within a few kilometres of the source followed by a rapid decline and thereafter, a more gradual decrease with increasing distance. Within the esker deposits, igneous rocks may form the major component and can extend further onto the limestone plain than in the adjacent till. Evidence is presented that indicates the "style" of dispersal was one in which glacial ice may have been strongly influenced by local bedrock topography and the regional structural trends. The ice tended to follow pre-existing valleys and lows, depositing till composed mainly of local bedrock. Gradations in Paleozoic clast content showed that the local bedrock lithology became the primary till component within 3 km of down-ice transport. Evidence is presented that indicated the last glaciation may have occurred as a relatively thin ice mass, followed by stagnation and recession. No evidence of a lateglacial re-advance was found within the study area. Because of the lack of a contact between the Dummer and drumlinized till, and because of results showing gradation of the Dummer till into the drumlinized till (as indicated by lithology content and grain size), it is suggested that no re-advance occurred.

Identifying the psychosexual implications of radical radiation treatment in prostate cancer

The purpose of this study was to determine whether there was any evidence of psychosexual morbidity among men who experienced radical radiation treatment for prostate cancer. With relatively little known or available retrospective data on the psychosexual implications of radical radiation treatment in men with prostate cancer, this study posited eight research questions which provided the basis for the research. Fifty men from Southern Ontario, between the ages of 52 to 78 years, were included in the study. They had been previously randomized to a clinical trial comparing radical radiation therapy by external beam radiation, or radical radiation using a combination of a temporary iridium implant plus external beam radiation, for localized or locally advanced prostate cancer. Assessment of sexual functioning, drive, attitudes, body image, and sexual satisfaction was drawn from a multidimensional approach, since psychosexuality was viewed as having an impact on biological, psychological, and sociological domains of functioning. Medical chart reviews, semi-structured interviews, demographical profiles of each participant, and the Derogatis Sexual Functioning Inventory (DSFI) were the methods used to collect data over a four-month period. Both quantitative and qualitative research methods were incorporated in the design and evaluation of the study. Frequencies, contingency analysis, Pearson's coefficient of correlation, t-tests, and ANOVA comprised the quantitative analysis. Data obtained from audio-taped interviews were analyzed qualitatively, and used for offering further insight and for facilitating the quantitative aspect of the analysis. Overall, there was sufficient evidence to suggest psychosexual morbidity among men who were treated with radiation therapy for prostate cancer. As well,there were a number of significant findings available to answer all of the posited research questions. The most significant findings were noted in post-treatment erectile ability and sexual activity. A post-treatment change in erectile ability was reported by eighty percent of men. Sixty percent of men noted a decrease in their ability to achieve an erection by reporting some morning stiffness only, penile rigidity insufficient for penetration, decreased control of erection, and loss of spontaneous erection. Other contributing factors associated with change in erectile status were: pain or altering sensation of orgasm, blood in ejaculate, pain and decreased amount of ejaculate, and penile numbness or pain. Eighty-two percent of men experienced a post-treatment change in sexual function, primarily due to the impact of decreasing erectile status. Only seven men reported that they experienced a decrease in desire mentally, whereas the vast majority did not experience any change in desire. Changes in foreplay, stress with optimal sexual positioning, and reduced spontaneity of sex, were other factors reported with the changes in sexual activity. The findings in this study broaden our understanding of what middle- to later-aged men feel and experience as they venture onward following treatment. This was the first study that evaluated available prospective data on pre-treatment erectile status and sexual activity. As well, this study was the first (with participant compliance rates of 100 percent) to have included an interview format to capture the views of such a large number of men. This study concluded with recommendations and implications for future research and practice as we move in the direction of understanding what is necessary for preserving psychosexual well being and enhancing quality of life in men treated with radiation therapy for prostate cancer.

Weight-preoccupation, personality and depression in university students : an interactionist perspective

The present research was designed to examine Beck's (1983; 1987) cognitive diathesis-stress model of depression in a new context. Specifically, this cross-sectional study investigated whether Beck's cognitive-personality traits of sociotropy and autonomy interacted with a specific daily hassle/stressor, weightpreoccupation, in the prediction of depressed mood in women and men. Weightpreoccupation was chosen as the particular daily stressor, because, according to Kanner, Coyne, Schaeffer, and Lazarus (1981). concern about weight and physical appearance were two of the most troublesome daily hassles among university students. ContraIy to current stereotypes, men also express concerns with weight and appearance (Cash, Winstead, &, landi, 1986), in both the direction of weight loss and weight/muscle gain (Drewnowski &, Yee, 1987). Thus, unique to this study was the examination of weight-preoccupation in men, not only in the direction of weight loss, but also in the direction of weight and muscle gain. Two hundred and fifty-one undergraduates were administered the revised SociotropyAutonomy Scale (SAS), the Beck Depression Inventory (BDij, the Hassles and Uplifts Scale, the Eating Disorders Inventory (EDI), and the Restraint Scale (RS). Through a process of model building, a final model was devised in which depression (ie., BDI total scores) was regressed on personality (Le., SAS Sociotropy) and weight-preoccupation (i.e., Drive for Thinness, Body Dissatisfaction, and the Restraint Scale). Separate hierarchical multiple regression analyses, with BDI as the dependent variable, were carried out for each of the 2 3 weight-preoccupation variables. Results revealed a specific congruent interaction between weight,..preoccupation and personality. Specifically, drive for thinness and body dissatisfaction interacted with sociotropy to predict depressed mood in both women and men, but the interaction between sociotropy and the Restraint Scale was marginal. Findings suggested that weight-preoccupied women and men experienced depressed mood to the extent that they were characterized as more highly sociotropic. As predicted, personality (i.e., sociotropy), moderated the relationship between daily stress (i.e., weight-preoccupation) and depression. Thus, results revealed that the proposed diathesis-stress model seemed to operate in the same manner for women and men. Moreover, the examination of weightpreoccupation among men (i.e., in the direction of both weight loss and weight/muscle gain) further revealed that, when curvilinearity was taken into account, highly sociotropic men, who had a low desire to gain weight and muscle mass (i.e., most likely those who desired to lose weight), experienced higher levels of depressed mood than those who had a "medium" desire for weight and muscle gain. However, the highest levels of depressed mood was experienced by highly sociotropic men who were highly weight-preoccupied in the direction of wanting to gain weight and muscle mass. In addition, possible reasons for the present fmdings, as wen as iimitations and impiicalions for future research are discussed.

Social comparison and body image in non or infrequent exercisers and exercisers

Body image refers to an individual's internal representation ofhis/her outer self (Cash, 1994; Thompson, Heinberg, Altabe, & Tantleff-Dunn, 1999). It is a multidimensional construct which includes an individual's attitudes towards hislher own physical characteristics (Bane & McAuley, 1998; Cash, 1994; Cash, 2004; Davison & McCabe, 2005; Muth & Cash, 1997; Sabiston, Crocker, & Munroe-Chandler, 2005). Social comparison is the process of thinking about the self in relation to others in order to determine if one's opinions and abilities are adequate and to assess one's social status (Festinger, 1954; Wood, 1996). Research investigating the role of social comparisons on body image has provided some information on the types and nature of the comparisons that are made. The act of making social comparisons may have a negative impact on body image (van den Berg et ai., 2007). Although exercise may improve body image, the impact of social comparisons in exercise settings may be less positive, and there may be differences in the social comparison tendencies between non or infrequent exercisers and exercisers. The present study examined the nature of social comparisons that female collegeaged non or infrequent exercisers and exercisers made with respect to their bodies, and the relationship of these social comparisons to body image attitudes. Specifically, the frequency and direction of comparisons on specific tal-gets and body dimensions were examined in both non or infrequent exercisers and exercisers. Finally, the relationship between body-image attitudes and the frequency and direction with which body-related social comparisons were made for non or infrequent exercisers and exercisers were examined. One hundred and fifty-two participants completed the study (n = 70 non or ill infrequent exercisers; n = 82 exercisers). Participants completed measures of social physique anxiety (SPA), body dissatisfaction, body esteem, body image cognitions, leisure time physical activity, and social comparisons. Results suggested that both groups (non or infrequent exercisers and exercisers) generally made social comparisons and most frequently made comparisons with same-sex friends, and least frequently with same-sex parents. Also, both groups made more appearance-related comparisons than non-appearance-related comparisons. Further, both groups made more negative comparisons with almost all targets. However, non or infrequent exercisers generally made more negative comparisons on all body dimensions, while exercisers made negative comparisons only on weight and body shape dimensions. MANOV As were conducted to examine if any differences on social comparisons between the two groups existed. Results of the MANOVAs indicated that frequency of comparisons with targets, the frequency of comparisons on body dimensions, and direction of comparisons with targets did not differ based on exercise status. However, the direction of comparison of specific body dimensions revealed a significant (F (7, 144) = 3.26,p < .05; 1]2 = .132) difference based on exercise status. Follow-up ANOVAs showed significant differences on five variables: physical attractiveness (F (1, 150) = 6.33,p < .05; 1]2 = .041); fitness (F(l, 150) = 11.89,p < .05; 1]2 = .073); co-ordination (F(I, 150) = 5.61,p < .05; 1]2 = .036); strength (F(I, dO) = 12.83,p < .05; 1]2 = .079); muscle mass or tone (F(l, 150) = 17.34,p < .05; 1]2 = 1.04), with exercisers making more positive comparisons than non or infrequent exercisers. The results from the regression analyses for non or infrequent exercisers showed appearance orientation was a significant predictor of the frequency of social comparisons N (B = .429, SEB = .154, /3 = .312,p < .01). Also, trait body image measures accounted for significant variance in the direction of social comparisons (F(9, 57) = 13.43,p < .001, R2adj = .68). Specifically, SPA (B = -.583, SEB = .186, /3 = -.446,p < .01) and body esteem-weight concerns (B = .522, SEB = .207, /3 = .432,p < .01) were significant predictors of the direction of comparisons. For exercisers, regressions revealed that specific trait measures of body image significantly predicted the frequency of comparisons (F(9, 71) = 8.67,p < .001, R2adj = .463). Specifically, SPA (B = .508, SEB = .147, /3 = .497,p < .01) and appearance orientation (B = .457, SEB = .134, /3 = .335,p < .01) were significant predictors of the frequency of social comparisons. Lastly, for exercisers, the results for the regression of body image measures on the direction of social comparisons were also significant (F(9, 70) = 14.65,p < .001, R2adj = .609) with body dissatisfaction (B = .368, SEB = .143, /3 = .362,p < .05), appearan.ce orientation (B = .256, SEB = .123, /3 = .175,p < .05), and fitness orientation (B = .423, SEB = .194, /3 = .266,p < .05) significant predictors of the direction of social comparison. The results indicated that young women made frequent social comparisons regardless of exercise status. However, exercisers m,a de more positive comparisons on all the body dimensions than non or infrequent exercisers. Also, certain trait body image measures may be good predictors of one's body comp~son tendencies. However, the measures which predict comparison tendencies may be different for non or infrequent exercisers and exercisers. Future research should examine the effects of social comparisons in different populations (i.e., males, the obese, older adults, etc.). Implications for practice and research were discussed.

L’écologie, réponse à la crise de sens? : le défi philosophique de la crise écologique selon la perspective de Hans Jonas

La plupart des philosophes s’entendent aujourd’hui pour affirmer qu’il y a une crise de sens en Occident. J.-F. Mattéi l’a démontré sans équivoque dans son ouvrage intitulé La crise de sens (2006). Selon lui, la crise se traduirait par cinq aspects: crise spirituelle, crise religieuse, crise de l’art, crise économique et finalement, crise de la culture. À notre avis, cela est exact, mais incomplet, car Mattéi néglige d’évoquer la crise la plus importante : la crise écologique. L’argument qui nous amène à en postuler la plus haute importance est simple : s’il n’y a plus d’environnement favorable au maintien de la vie humaine, c’est la fin de l’humanité. L’aspect environnemental de la crise ne peut donc pas être occulté de la réflexion concernant son ensemble, car pour nous, elle est l’occasion d’un questionnement philosophique appelé à répondre à cette crise. Dans un livre intitulé Écologie, éthique et création (1994), Dominique Jacquemin nous oriente en ce sens en y posant les trois questions suivantes : 1. Est-il possible de qualifier éthiquement ce à quoi nous convie aujourd’hui la préoccupation écologique? 2. Quel rapport au monde et à l’avenir la préoccupation écologique est-elle à même d’instaurer? 3. Quelles sont les possibilités pour que la démarche écologique devienne un lieu éthique à même d’instaurer un rapport homme-nature dans le présent et l’avenir? Ainsi, le questionnement que soulève la crise écologique amène à réfléchir sur le sens et la finalité de la vie humaine et sur la conception même de l’être humain dans son rapport au monde. Le propos de ce mémoire est de répondre à ces dernières questions en nous inspirant des principes éthiques mis en avant dans Le Principe Responsabilité (1990) de Hans Jonas, et cela, dans le but d’en faire ressortir sa pertinence face au défi environnemental actuel. En d’autres termes, nous tâcherons de répondre à la question suivante : Pour la société actuelle et son prolongement, quels sont les aspects les plus pertinents de la thèse de Hans Jonas (1903 – 1993) dans son Principe Responsabilité (1990) concernant la résolution de la crise de sens? À cette fin, le mémoire comporte deux chapitres dont le premier, qui forme le cœur du mémoire, comporte trois parties principales liées aux trois questions posées précédemment. Le deuxième et dernier chapitre comporte premièrement une analyse critique du Principe responsabilité et par la suite son appréciation critique. Méthodologiquement, nous entendons éclairer la nécessité de la responsabilité éthique face à la crise écologique en mettant l’accent sur les thèmes de l’altérité et de la solidarité. C’est de cette manière que nous espérons montrer que la crise écologique actuelle ouvre des avenues possibles à la résolution, au moins partielle, de la crise de sens à laquelle nous sommes actuellement confrontés.

Systemic oxidative stress is implicated in the pathogenesis of brain edema in rats with chronic liver failure.

Chronic liver failure leads to hyperammonemia, a central component in the pathogenesis of hepatic encephalopathy (HE); however, a correlation between blood ammonia levels and HE severity remains controversial. It is believed oxidative stress plays a role in modulating the effects of hyperammonemia. This study aimed to determine the relationship between chronic hyperammonemia, oxidative stress, and brain edema (BE) in two rat models of HE: portacaval anastomosis (PCA) and bile-duct ligation (BDL). Ammonia and reactive oxygen species (ROS) levels, BE, oxidant and antioxidant enzyme activities, as well as lipid peroxidation were assessed both systemically and centrally in these two different animal models. Then, the effects of allopurinol (xanthine oxidase inhibitor, 100mg/kg for 10days) on ROS and BE and the temporal resolution of ammonia, ROS, and BE were evaluated only in BDL rats. Similar arterial and cerebrospinal fluid ammonia levels were found in PCA and BDL rats, both significantly higher compared to their respective sham-operated controls (p<0.05). BE was detected in BDL rats (p<0.05) but not in PCA rats. Evidence of oxidative stress was found systemically but not centrally in BDL rats: increased levels of ROS, increased activity of xanthine oxidase (oxidant enzyme), enhanced oxidative modifications on lipids, as well as decreased antioxidant defense. In PCA rats, a preserved oxidant/antioxidant balance was demonstrated. Treatment with allopurinol in BDL rats attenuated both ROS and BE, suggesting systemic oxidative stress is implicated in the pathogenesis of BE. Analysis of ROS and ammonia temporal resolution in the plasma of BDL rats suggests systemic oxidative stress might be an important "first hit", which, followed by increases in ammonia, leads to BE in chronic liver failure. In conclusion, chronic hyperammonemia and oxidative stress in combination lead to the onset of BE in rats with chronic liver failure.

A brain-computer interface for navigation in virtual reality

L'interface cerveau-ordinateur (ICO) décode les signaux électriques du cerveau requise par l’électroencéphalographie et transforme ces signaux en commande pour contrôler un appareil ou un logiciel. Un nombre limité de tâches mentales ont été détectés et classifier par différents groupes de recherche. D’autres types de contrôle, par exemple l’exécution d'un mouvement du pied, réel ou imaginaire, peut modifier les ondes cérébrales du cortex moteur. Nous avons utilisé un ICO pour déterminer si nous pouvions faire une classification entre la navigation de type marche avant et arrière, en temps réel et en temps différé, en utilisant différentes méthodes. Dix personnes en bonne santé ont participé à l’expérience sur les ICO dans un tunnel virtuel. L’expérience fut a était divisé en deux séances (48 min chaque). Chaque séance comprenait 320 essais. On a demandé au sujets d’imaginer un déplacement avant ou arrière dans le tunnel virtuel de façon aléatoire d’après une commande écrite sur l'écran. Les essais ont été menés avec feedback. Trois électrodes ont été montées sur le scalp, vis-à-vis du cortex moteur. Durant la 1re séance, la classification des deux taches (navigation avant et arrière) a été réalisée par les méthodes de puissance de bande, de représentation temporel-fréquence, des modèles autorégressifs et des rapports d’asymétrie du rythme β avec classificateurs d’analyse discriminante linéaire et SVM. Les seuils ont été calculés en temps différé pour former des signaux de contrôle qui ont été utilisés en temps réel durant la 2e séance afin d’initier, par les ondes cérébrales de l'utilisateur, le déplacement du tunnel virtuel dans le sens demandé. Après 96 min d'entrainement, la méthode « online biofeedback » de la puissance de bande a atteint une précision de classification moyenne de 76 %, et la classification en temps différé avec les rapports d’asymétrie et puissance de bande, a atteint une précision de classification d’environ 80 %.

La tagatose-1,6-bisphosphate aldolase et la fructose-1,6-bisphosphate aldolase de classe I : mécanisme et stéréospécificité

La tagatose-1,6-biphosphate aldolase de Streptococcus pyogenes est une aldolase qui fait preuve d'un remarquable manque de spécificité vis à vis de ses substrats. En effet, elle catalyse le clivage réversible du tagatose-1,6-bisphosphate (TBP), mais également du fructose-1,6-bisphosphate (FBP), du sorbose-1,6-bisphosphate et du psicose-1,6-bisphosphate, quatre stéréoisomères, en dihydroxyacétone phosphate (DHAP) et en glycéraldéhyde-3-phosphate (G3P). Aldolase de classe I, qui donc catalyse sa réaction en formant un intermédiaire covalent obligatoire, ou base de Schiff, avec son susbtrat, la TBP aldolase de S. pyogenes partage 14 % d’identité avec l’enzyme modèle de cette famille, la FBP aldolase de muscle de mammifère. Bien que le mécanime catalytique de la FBP aldolase des mammifères ait été examiné en détails et qu’il soit approprié d’en tirer des renseignements quant à celui de la TBP aldolase, le manque singulier de stéréospécificité de cette dernière tant dans le sens du clivage que celui de la condensation n’est toujours pas éclairci. Afin de mettre à jour les caractéristiques du mécanisme enzymatique, une étude structurale de la TBP aldolase de S. pyogenes, un pathogène humain extrêmement versatile, a été entreprise. Elle a permis la résolution des structures de l’enzyme native et mutée, en complexe avec des subtrats et des inhibiteurs compétitifs, à des résolutions comprises entre 1.8 Å et 2.5 Å. Le trempage des cristaux de TBP aldolase native et mutante dans une solution saturante de FBP ou TBP a en outre permis de piéger un authentique intermédiaire covalent lié à la Lys205, la lysine catalytique. La determination des profils pH de la TBP aldolase native et mutée, entreprise afin d'évaluer l’influence du pH sur la réaction de clivage du FBP et TBP et ìdentifier le(s) résidu(s) impliqué(s), en conjonction avec les données structurales apportées par la cristallographie, ont permis d’identifier sans équivoque Glu163 comme résidu responsable du clivage. En effet, le mode de liaison sensiblement différent des ligands utilisés selon la stéréochimie en leur C3 et C4 permet à Glu163, équivalent à Glu187 dans la FBP aldolase de classe I, d’abstraire le proton sur l’hydroxyle du C4 et ainsi d’amorcer le clivage du lien C3-C4. L’étude du mécanimse inverse, celui de la condensation, grâce par exemple à la structure de l’enzyme native en complexe avec ses substrats à trois carbones le DHAP et le G3P, a en outre permis d’identifier un isomérisme du substrat G3P comme possible cause de la synthèse des isomères en C4 par cette enzyme. Ce résultat, ainsi que la decouverte d’un possible isomérisme cis-trans autour du lien C2-C3 de la base de Schiff formée avec le DHAP, identifié précedemment, permet de cerner presque complètement les particularités du mécanisme de cette enzyme et d’expliquer comment elle est capable de synthétiser les quatres stéréoisomères 3(S/R), 4(S/R). De plus, la résolution de ces structures a permis de mettre en évidence trois régions très mobiles de la protéine, ce qui pourrait être relié au rôle postulé de son isozyme chez S. pyogenes dans la régulation de l’expression génétique et de la virulence de la bactérie. Enfin, la résolution de la structure du mutant Lys229→Met de la FBP aldolase de muscle en complexe avec la forme cyclique du FBP, de même que des études cristallographiques sur le mutant équivalent Lys205→Met de la TBP aldolase de S. pyogenes et des expériences de calorimétrie ont permis d’identifier deux résidus particuliers, Ala31 et Asp33 chez la FBP aldolase, comme possible cause de la discrimination de cette enzyme contre les substrats 3(R) et 4(S), et ce par encombrement stérique des substrats cycliques. La cristallographie par rayons X et la cinétique enzymatique ont ainsi permis d'avancer dans l'élucidation du mécanisme et des propriétés structurales de cette enzyme aux caractéristiques particulières.

Development of Bioreactors for Nitrifying Water In Closed System Hatcheries Of Penaeid And Non-Penaeid Prawns

In the present study the development of bioreactors for nitrifying water in closed system hatcheries of penaeid and non-penaeid prawns. This work is an attempt in this direction to cater to the needs of aquaculture industry for treatment and remediation of ammonia and nitrate in penaeid and non-penaeid hatcheries, by developing nitrifying bacteria allochthonous to the particular environment under consideration, and immobilizing them on an appropriately designed support materials configured as reactors. Ammonia toxicity is the major limiting factors in penaeid and non-penaeid hatchery systems causing lethal and sublethal effects on larvae depending on the pH values. Pressing need of the aquaculture industry to have a user friendly and economically viable technology for the removal of ammonia, which can be easily integrated to the existing hatchery designs without any major changes or modifications. Only option available now is to have biological filters through which water can be circulated for the oxidation of ammonia to nitrate through nitrite by a group of chemolithotrophs known as nitrifying bacteria. Two types of bioreactors have been designed and developed. The first category named as in situ stringed bed suspended bioreactor(SBSBR) was designed for use in the larval rearing tanks to remove ammonia and nitrite during larval rearing on a continuous basis, and the other to be used for nitrifying freshly collected seawater and spent water named as ex situ packed bed bioreactior(PBBR). On employing the two reactors together , both penaeid and non-penaeid larval rearing systems can be made a closed recirculating system at least for a season. A survey of literature revealed that the in situ stringed bed suspended reactor developed here is unique in its design, fabrication and mode of application.

STUDY OF INFLUENCE OF SAFETY ENGINEERING AND MANAGEMENT PRACTICES IN SELECTED INDUSTRIES IN KERALA

In the twentieth century, as technology grew with it. This resulted in collective efforts and thinking in the direction of controlling work related hazards and accidents. Thus, safety management developed and became an important part of industrial management. While considerable research has been reported on the topic of safety management in industries from various parts of the world, there is scarcity of literature from India. It is logical to think that a clear understanding of the critical safety management practices and their relationships with accident rates and management system certifications would help in the development and implementation of safety management systems. In the first phase of research, a set of six critical safety management practices has been identified based on a thorough review of the prescriptive, practitioner, conceptual and empirical literature. An instrument for measuring the level of practice of these safety conduction a survey using questionnaire in chemical/process industry. The instrument has been empirically validated using Confirmatory Factor Analysis (CFA) approach. As the second step. Predictive validity of safety management practices and the relationship between safety management practices and self-reported accident rates and management system certifications have been investigated using ANOVA. Results of the ANOVA tests show that there is significant difference in the identified safety management practices and the determinants of safety performance have been investigated using Multiple Regression Analysis. The inter-relationships between safety management practices, determinants of safety performance and components of safety performance have been investigated with the help of structural equation modeling. Further investigations into engineering and construction industries reveal that safety climate factors are not stable across industries. However, some factors are found to be common in industries irrespective of the type of industry. This study identifies the critical safety management practices in major accident hazard chemical/process industry from the perspective of employees and the findings empirically support the necessity for obtaining safety specific management system certifications

Studies on new processing aids and other compounding ingredients in special purpose rubbers

In the first part of the study we probed the effectiveness of rice bran oil as a multipurpose compounding ingredient for nitrile (NBR) and chloroprene (CR) rubbers. This oil has already been successfully employed in the compounding of NR and SBR in this laboratory.In this context we thought it worthwhile to try this oil in the polar rubbers viz, NBR and CR also. The principle of like dissolves like as applicable to solvents is equally applicable while selecting a plasticiser, elastomer combination. Because of the compatibility considerations polar plasticisers are preferred for polar rubbers like NBR and CR. Although plasticisation is a physical phenomenon and no chemical reaction is involved, the chemical structure of plasticisers determines how much physical attraction there is between the rubber and the plasticiser. In this context it is interesting to note that the various fatty acids present in rice bran oil have a long paraffinic chain, characteristic of waxes, with an acid group at the end of the molecule. The paraffinic end of the molecule contributes lubricating effects and limits compatibility whereas the acid end group contributes some polarity and is also chemically reactive. Because of absorption of acid group on the surface of pigments, these acids will have active pigment wetting characteristics also. These factors justifies the role of rice bran oil as a co-activator and lubricating agent for NBR and CR. In fact in our study we successfully replaced stearic acid as co-activator and aromatic oillDOP as processing aid for CR and NBR with rice bran oil.This part of the study has got special significance in the fact that rubber industry now heavily depends on petroleum industry for process oils. The conventional process oils like aromatic, naphthenic and paraffinic oils are increasingly becoming costlier, as its resources in nature are fast depleting. Moreover aromatic process oils are reported to be carcinogenic because of the presence of higher levels of polycyclic aromatic compounds in these oils.As a result of these factors, a great amount research is going on world over for newer processing aids which are cost effective, nontoxic and performanance wise at par with the conventional ones used in the rubber industry. Trials with vegetable oils in this direction is worth trying.Antioxidants are usually added to the rubber compound to minimise ageing effects from heat, light, oxygen etc. As rice bran oil contains significant amount of tocopherols and oryzanol which are natural antioxidants, we replaced a phenolic antioxidant like styrenated phenol (SP) from the compound recipe of both the rubbers with RBO and ascertained whether this oil could function in the role of antioxidant as well.Preparation and use of epoxidised rice bran oil as plasticiser has already been reported.The crude rice bran oil having an iodine value of 92 was epoxidised in this laboratory using peracetic acid in presence of sulphuric acid as catalyst. The epoxy content of the epoxidised oil was determined volumetrically by treating a known weight of the oil with excess HCI and back titrating the residual HCI with standard alkali solution. The epoxidised oil having an epoxy content of 3.4% was tried in the compounding of NBR and CR as processing aids. And results of these investigations are also included in this chapter. In the second part of the study we tried how RBO/ERBO could perform when used as a processing aid in place of aromatic oil in the compounding of black filled NRCR blends. Elastomers cannot have all the properties required for a particular applications, so it is common practice in rubber industry to blend two elastomers to have desired property for the resulting blend.In this RBO/ERBO was tried as a processing aid for plasticisation, dispersion of fillers, and vulcanisation of black filled NR-CR blends.Aromatic oil was used as a control. The results of our study indicate that these oils could function as a processing aid and when added together with carbon black function as a cure accelerator also.PVC is compatible with nitrile rubber in all proportions, provided NBR has an acrylonitrile content of 25 to 40%. Lower or higher ACN content in NBR makes it incompatible with PVC.PVC is usually blended with NBR at high temperatures. In order to reduce torque during mixing, additional amounts of plasticisers like DOP are added. The plasticiser should be compatible both with PVC and NBR so as to get a homogeneous blend. Epoxidised soyaben oil is reported to have been used in the compounding of PVC as it can perfonn both as an efficient plasticiser and heat stabilizer.At present DOP constitute the largest consumed plasticiser in the PVC compounding. The migration of this plasticiser from food packaging materials made of PVC poses great health hazards as this is harmful to human body. In such a scenario we also thought it worthwhile to see whether DOP could be replaced by rice bran oil in the compounding of NBR-PVC blends Different blends of NBR-PVC were prepared with RBO and were vulcanized using sulphur and conventional accelerators. The various physical and mechanical properties of the vulcanisates were evaluated and compared with those prepared with DOP as the control plasticiser. Epoxidised rice bran oil was also tried as plasticiser for the preparation of NBR-PVC blends. A comparison of the processability and cure characteristics of the different blends prepared with DOP and ERBO showed that ERBO based blends have better processability and lower cure time values. However the elastographic maximum torque values are higher for the DOP based blends. Almost all of the physical properties evaluated are found to be slightly better for the DOP based blends over the ERBO based ones. However a notable feature of the ERBO based blends is the better percentage retention of elongation at break values after ageing over the DOP based blends. The results of these studies using rice bran oil and its epoxidised variety indicated that they could be used as efficient plasticisers in place of DOP and justifies their role as novel, nontoxic, and cheap plasticisers for NBR-PVC blends.