Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Síntese e aplicações de inibidores peptídicos de topoisomerases associados a sistemas de liberação controlada de fármacos

O uso de novas tecnologias para o desenvolvimento de medicamentos constitui uma estratégia promissora no campo da biotecnologia. Nesse sentido, peptídeos com efeito antimicrobiano, produzidos por plantas, animais e microrganismos estão sendo utilizados como modelos para o desenvolvimento de novos medicamentos com aplicações em saúde. Resultados promissores têm sido obtidos em relação à inibição da atividade das enzimas bacterianas DNA girase e topoisomerase IV por derivados peptídicos de toxinas bacterianas, comprovados em ensaios in vitro. Porém, ensaios in vivo não demonstraram reprodutibilidade, basicamente devido à baixa permeabilidade da célula bacteriana a estes compostos. Desta forma, o objetivo deste projeto consiste em aplicar sistemas eficientes para promover o acesso de moléculas peptídicas sintéticas derivadas de toxinas bacterianas, ao meio intracelular e, consequentemente, aos seus alvos intracelulares: as enzimas DNA girase e/ou topoisomerase IV. Com isso, pretendemos solucionar a barreira técnica em que se encontram as aplicações dessa classe de biomoléculas como precursores de novos agentes antibacterianos, o que certamente causaria um importante avanço nas pesquisas desenvolvidas pelo grupo

Melhoria da qualidade de um processo de usinagem utilizando as técnicas de avaliação de Taguchi

Delivering to the customers a product or service with the expected quality associated to the huge competitiveness that exists in the market nowadays, has been making organizations increasingly focus on quality planning using techniques which are directed towards the continuous improvement process and production optimization. Thus, this paper aims to improve a machining process using the techniques of experimental design to the optimization and this also includes the analysis of the measurement system. For this purpose, the alloy Nimonic 80A, a nickel base superalloy, was used in the process due to its widespread use for high temperatures, applying this study the robust method proposed by Genichi Taguchi, determining the influence of the factors considered input variables, cutting speed, feed rate, depth of cut, type of tool, lubrication, and material hardness, in the output or response variable, surface roughness, concluding with the use of Taguchi orthogonal array L16 and by analysis of ANOVA that the factor feed rate is significant and offers greater effect on the response variable studied, should be set to 0,12mm/rev. Moreover, the factor type of tool has more influence on the process when compared to other factors, being CP250 the one more suitable to the process. Lastly, the interaction feed rate x cutting speed provides greater significance in the process regarding to surface roughness variable, being the best match between them 0,12mm/rev to the feed rate and 90m/min to the cutting speed. In order to evaluate the measurement system, it was applied the repeatability and reproducibility method (R&R), through which we saw that the system needs improvement (R & R = 88.04% >>> 30%) as the value found in the study was well above compared to the one that classifies the system as inappropriate

Controle de qualidade e levantamento radiométrico em aparelho de Raios-X médico convencional

Along with the advance of technology, in terms of the expansion of medical exams that uses the ionizing radiation for diagnosis, there is also the concern about quality control for maintaining quality in radiographic imaging and for delivering low dose to the patient. Based on the Federal Order 453 of the Secretariat of Health Surveillance, which takes account of the practical and justification of individual medical exposures, the optimization of radiological protection, limitation of individual dose, and the prevention of accidents, were done through this paper radiodiagnostic tests on medical equipment in order to accept it or not, according to SVS-453. Along with the help and support of P&R Consulting and Medical Physics Marilia, SP, were made Quality Control and Radiometric Control in equipment from various cities across the state of São Paulo. The equipment discussed in this work is classified as conventional X-ray. According to the Federal Order SVS-453, the quality control in the program of quality assurance should include the following minimum set of constancy tests, with following minimum frequency: biennial tests for representative values of dose given to the patients of radiography and CT performed in the service; annual tests for accuracy of the indicator tube voltage (kVp), accuracy of exposure time, half-value layer, aligning the central axis of the beam of x-ray tube, performance (mGy / mA.min.m²), linearity of the rate of kerma on air with the mAs, reproducibility of the kerma on air rates, reproducibility of the automatic exposure, focal spot size, integrity of accessories and clothing for individual protection; semiannually for collimation system accuracy; weekly for temperature processing system and sensitometry processing system. For the room Radiometric Survey it was done a sketch...(Complete abstract click electronic access below)

Avaliação das doses de cães submetidos a exames radiográficos de pulmão

This study aims to determine surface skin doses in dogs (with suspected pulmonary metastasis) submitted to chest X-rays using the technique of thermoluminescence dosimetry. Twenty seven exams from different dogs were performed at the Faculdade de Medicina Veterinária e Zootecnia da Universidade Estadual Paulista (FMVZ-UNESP/Botucatu). The doses were evaluated using thermoluminescent dosimeters of calcium sulphate doped with dysprosium (CaSO4:Dy) produced by the Instituto de Pesquisas Energéticas e Nucleares (IPEN-CNEN). The pulmonary metastasis exams are carried out in three projections, one dorsal-ventral and two lateral-lateral. During the procedures the projection thicknesses and source-skin surface distances were registered. To simulate the dog phantom the dosimeters were positioned in a cubic simulator (30x30x30 cm) of polymethylmethacrylate (PMMA) filled with water and irradiated according to the parameters of projections with the X-ray energies ranging from 45 to 70 kV. To estimate the surface skin dose the dose-response curves were obtained for X-ray energies of 50 and 70 kV using the diagnostic X-ray beam machine of the Instruments Calibration Laboratory of IPEN for doses of 1.5, 2.0, 2.5, 3.5 and 4.0 mGy. The main difficulty of this work was the dog immobilization that is reflected in poor-quality diagnostic imaging and, consequently, demands the repetition of the exams, which contributes to the increase of the doses received by the animals being studied and the clinical staff. The doses evaluated in this type of procedure are between 0.43 and 4.22 mGy. This research has shown to be extremely important for the assessment of doses involved in veterinary diagnostic radiology procedures, and as a parameter in the individual monitoring of pet’s owners who assist the animal positioning and occupationally exposed workers of the Department of Veterinary Radiology

Estudo da viabilidade de sedimentos formulados para a aplicação em estudos ecotoxicológicos e químicos: ênfase para os interferentes endócrinos 17alfa-etinilestradiol e 17beta-estradiol

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Validação de métodos nociceptivos elétrico, mecânico e térmico para avaliação de dor de equinos tratados com metadona associada à detomidinaou acepromazina

Pós-graduação em Anestesiologia - FMB

Avaliação dos resultados das contagens de células somáticas obtidas pelo equipamento Ekomilk Scan e suas correlações com outros métodos de análise

Pós-graduação em Medicina Veterinária - FCAV

Técnicas de caracterização microestrutural, por microscopia óptica e microscopia eletrônica de varredura, de aços bifásicos e multifásicos aplicados à indústria automobilística

This project developed microstructural characterization technics of commercial dualphase and multi-phasic (TRIP) steels that were provided by the automotive industry and are currently used as the raw material for the production of automobiles. Inserted in this context, there is the development of the advanced high strength steels in consonance with the ULSABAVC project, which aims the production of safe, economically viable and efficient in terms of fuel consumption vehicles for the 21st century. The micro-structural characterization of biphasic and multiphase steels was done by the identification and quantification of the coexistent phases. In this item, a special attention was given to the technics that were performed using optic microscopy and scanning electron microscopy. An important contribution to this work was the utilization of different alternative chemical reagents (Beraha, Heat-Tinting technics) in addition to the classical ones (Nital and LePera)already used conventionally by the UNESP's Group of Mechanical, Microstructural and Fractografic Characterization of Materials. The revealed microstructures were correlated with the materials' mechanical properties determined through traction tests, such as ultimate tensile strengths, yield strength and stretching important since the material has structural application in the automotive industry. As a result, it was observed the superiority concerning the studied mechanical properties for the biphasic and multiphasic steels when compared to the conventional carbon steels. Besides, it was perceived a large potential for the industrial scale utilization of the Heat Tinting technics in this field, seen its differentiation of the existent phases and easy reproducibility

Reproducibility of microhandeness measurements in different surfices

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

ScanWhite©: método objetivo para avaliação do nível de clareamento dental

A comparação visual com escalas de cor, universalmente empregada para avaliar o resultado das diferentes substâncias, técnicas e aparelhos utilizados no clareamento dental, tem se mostrado um método limitado, questionável, subjetivo e pouco confiável. Os métodos instrumentais, que utilizam espectroscópios ou imagens digitais, têm se mostrado mais adequados por oferecerem avaliações objetivas, maior reprodutibilidade e confiabilidade. Neste artigo, serão apresentados e discutidos os resultados obtidos com a utilização do ScanWhite© ? software para avaliação objetiva do nível de clareamento dental e apoio à decisão clínica, que baseia sua avaliação no processamento computacional de imagens digitais. Esse tem como principais diferenciais: (1) algoritmo calibrador para compensar as variações de luminosidade do ambiente, (2) apresentação dos resultados em valores numéricos e através do gráfico de evolução do clareamento dental, (3) interface intuitiva e facilidade de uso, (4) determinação dos índices de apoio à decisão (IPS ? índice de possibilidade de sucesso, e IRS ? índice de risco de sensibilidade antes do início do tratamento) e (5) emissão de relatório geral, autorizações e recomendações pós-clareamento.

Métodos de estimativa de peso e altura na avaliação de desnutrição de pacientes com câncer

To calculate the estimated and actual height and weight measures in cancer patients, evaluate the correlation and concordance of these measures and to identify the malnutrition patients. 62 cancer patients, treated at the Amaral Carvalho Hospital (Jaú- SP). For classifi cation of nutritional status, the Patient-Generated Subjective Global Assessment, the Body Mass Index and the relationship with usual weight were used. For the estimated weight was used the algorithm Chumlea et al.7 and estimated height, the equation proposed by Chumlea et al.8 and Kwok & Whitelaw24. The Pearson Correlation Coeffi cient and the Intraclass Correlation Coeffi cient was calculated and simple linear regression was conducted. To compare the malnutrition detected by different methods, the Cochran’s Q test were performed. There was a strong and signifi cant correlation between the estimated and actual weight (r=0,95; CI95%=0,92-0,97; p<0,001) and excellent concordance (ρ=0,95). For height measurements, a signifi cant correlation was observed between the actual and estimated measurement the method Chumlea et al.8 (r=0,78; CI95%=0,66-0,86; p<0,001) and Kwok & Whitelaw24 (r=0,85; CI95%: 0,75-0,90; p<0,001). Concordance was “Good” (ρ=0,72) and “Moderate” (ρ=0,67) between the actual height and estimated by Chumlea et al.8 and Kwok & Whitelaw,24 respectively. There was a strong correlation between the actual and estimated weight and height measures. The reproducibility of the equation proposed by Chumlea et al.8 to calculate height was better. The nutritional status, the patients classifi ed as malnutrition was greater when using the Patient-Generated Subjective Global Assessment and the relationship with usual weight.

Avaliação psicométrica da escala de atitudes em relação à estatística

RESUMO: O objetivo do estudo foi estimar a validade e confiabilidade da Escala de atitudes em relação à Estatística (EAE) quando aplicada a estudantes de Ciências Farmacêuticas. A amostra de 253 estudantes foi subdividida em duas partes. Sessenta por cento da amostra foi utilizada para explorar a estrutura fatorial e 40% para confirmá-la. Para verificar a reprodutibilidade da escala a mesma foi aplicada em duplicata a 40 estudantes. Aplicou-se o Teste de esfericidade de Bartlett e o índice Kaiser-Meyer-Olkin (KMO). A extração dos fatores foi realizada pela Análise de Componentes Principais. Realizou-se rotação ortogonal Varimax. Calculou-se o Coeficiente alfa de Cronbach (α) e o Coeficiente de Correlação Intraclasse (ρ). Realizou-se análise fatorial confirmatória. Elaborou-se um modelo hierárquico de segunda ordem (MHSO). O teste de esfericidade de Bartlett e o índice KMO foram excelentes (χ 2 =1835,815, p<0,001; KMO=0,935). Verificou-se dois fatores com valores próprios acima de 1 (λ=9,748; λ=2,086) explicando 59,2% da variância total. A questão 2 foi removida. Observou-se excelente consistência interna e reprodutibilidade. O modelo fatorial apresentou índices de qualidade de ajustamento bons (λ=0,59-0,86, χ 2 /gl=1,691, CFI=0,919, GFI=0,804, RMSEA=0,079). A validade discriminante dos fatores foi adequada. A EAE apresentou estrutura bifatorial na amostra com níveis de validade e confiabilidade adequados.

Confiabilidade do teste de identificação de transtornos devido ao uso de álcool (AUDIT) em adolescentes

The objective of this study was to estimate the reliability of the alcohol use disorders identification test (AUDIT) applied to adolescents. Evaluations were performed with 141 students of ages ranging from 14 to 17 years (14.93±0.62). The internal consistency of the instrument was estimated by Cronbach’s alpha coefficient and its reproducibility by weighted Kappa statistics by score and by a reliability interval of 95%. The AUDIT presented excellent internal consistency (α=0.80, rinter-item=0.29). Most questions present reproducibility ranked as “good”. It is concluded that the AUDIT is a reliable instrument to survey information about alcohol use in adolescents.

Os efeitos da manipulação do sistema proprioceptivo na locomoção de pessoas com doença de Parkinson com e sem congelamento da marcha: desenvolvimento, otimização e aplicabilidade de um sistema de vibração muscular

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)