Datação radiocarbônica de sítios arqueológicos do tipo sambaqui pela técnica de absorção de CO2: uma alternativa à síntese benzênica

The sambaquis are archaeological sites with remains of pre-historical Brazilian civilizations. They look like small hills containing different kinds of shells, animal and fish bones, small artifacts and even human skeletons. Since the sambaqui sites in the Rio de Janeiro state are younger than 6000 years, the applicability of CO2 absorption on Carbo-Sorb® and 14C determination by counting on a low background liquid scintillation counter was tested. The International Atomic Energy Agency standard reference material IAEA-C2 was used in order to standardize the method. Nine sambaqui samples from five different archaeological sites found in the Rio de Janeiro state were analyzed and 14C ages between 2100 and 3600 years BP were observed. The same samples were sent to the 14C Laboratory of the Centro de Energia Nuclear na Agricultura (CENA/USP) where similar results were obtained.

Karisman juuret narsismissa

Kirjallisuusarvostelu

Application of a non isotropic turbulence model to stable atmospheric flows and dispersion over 3D topography

A non isotropic turbulence model is extended and applied to three dimensional stably stratified flows and dispersion calculations. The model is derived from the algebraic stress model (including wall proximity effects), but it retains the simplicity of the "eddy viscosity" concept of first order models. The "modified k-epsilon" is implemented in a three dimensional numerical code. Once the flow is resolved, the predicted velocity and turbulence fields are interpolated into a second grid and used to solve the concentration equation. To evaluate the model, various steady state numerical solutions are compared with small scale dispersion experiments which were conducted at the wind tunnel of Mitsubishi Heavy Industries, in Japan. Stably stratified flows and plume dispersion over three distinct idealized complex topographies (flat and hilly terrain) are studied. Vertical profiles of velocity and pollutant concentration are shown and discussed. Also, comparisons are made against the results obtained with the standard k-epsilon model.

Floristic and vegetation structure of a granitic grassland in Southern Brazil

A floristic and structural survey of a natural grassland community was conducted on Morro do Osso, a granitic hill in Porto Alegre, RS, Brazil. Structural data were surveyed in 39 one square meter plots placed over two major grassland areas. An accidental fire has occurred in one of the areas approximately one year prior to our survey, leading to further analysis of parameters differences between sites. The floristic list contains 282 species, whereas the structural survey has found 161 species. Families with highest accumulated importance values were Poaceae, Asteraceae and Fabaceae. The diversity and evenness indexes were 4.51 nats ind-1 and 0.86, respectively. Cluster analysis denoted two groups coinciding with the areas distinguished by the fire disturbance. A similarity analysis between our data and two other data sets from nearby granitic hills resulted in 28% to 35% similarity, with equivalent species-family distribution and many common dominant species, corroborating the concept of a continuous flora along the South Brazilian granitic hills.

Large-eddy simulation of wind flows over complex terrains for wind energy applications

Wind energy has obtained outstanding expectations due to risks of global warming and nuclear energy production plant accidents. Nowadays, wind farms are often constructed in areas of complex terrain. A potential wind farm location must have the site thoroughly surveyed and the wind climatology analyzed before installing any hardware. Therefore, modeling of Atmospheric Boundary Layer (ABL) flows over complex terrains containing, e.g. hills, forest, and lakes is of great interest in wind energy applications, as it can help in locating and optimizing the wind farms. Numerical modeling of wind flows using Computational Fluid Dynamics (CFD) has become a popular technique during the last few decades. Due to the inherent flow variability and large-scale unsteadiness typical in ABL flows in general and especially over complex terrains, the flow can be difficult to be predicted accurately enough by using the Reynolds-Averaged Navier-Stokes equations (RANS). Large- Eddy Simulation (LES) resolves the largest and thus most important turbulent eddies and models only the small-scale motions which are more universal than the large eddies and thus easier to model. Therefore, LES is expected to be more suitable for this kind of simulations although it is computationally more expensive than the RANS approach. With the fast development of computers and open-source CFD software during the recent years, the application of LES toward atmospheric flow is becoming increasingly common nowadays. The aim of the work is to simulate atmospheric flows over realistic and complex terrains by means of LES. Evaluation of potential in-land wind park locations will be the main application for these simulations. Development of the LES methodology to simulate the atmospheric flows over realistic terrains is reported in the thesis. The work also aims at validating the LES methodology at a real scale. In the thesis, LES are carried out for flow problems ranging from basic channel flows to real atmospheric flows over one of the most recent real-life complex terrain problems, the Bolund hill. All the simulations reported in the thesis are carried out using a new OpenFOAM® -based LES solver. The solver uses the 4th order time-accurate Runge-Kutta scheme and a fractional step method. Moreover, development of the LES methodology includes special attention to two boundary conditions: the upstream (inflow) and wall boundary conditions. The upstream boundary condition is generated by using the so-called recycling technique, in which the instantaneous flow properties are sampled on aplane downstream of the inlet and mapped back to the inlet at each time step. This technique develops the upstream boundary-layer flow together with the inflow turbulence without using any precursor simulation and thus within a single computational domain. The roughness of the terrain surface is modeled by implementing a new wall function into OpenFOAM® during the thesis work. Both, the recycling method and the newly implemented wall function, are validated for the channel flows at relatively high Reynolds number before applying them to the atmospheric flow applications. After validating the LES model over simple flows, the simulations are carried out for atmospheric boundary-layer flows over two types of hills: first, two-dimensional wind-tunnel hill profiles and second, the Bolund hill located in Roskilde Fjord, Denmark. For the twodimensional wind-tunnel hills, the study focuses on the overall flow behavior as a function of the hill slope. Moreover, the simulations are repeated using another wall function suitable for smooth surfaces, which already existed in OpenFOAM® , in order to study the sensitivity of the flow to the surface roughness in ABL flows. The simulated results obtained using the two wall functions are compared against the wind-tunnel measurements. It is shown that LES using the implemented wall function produces overall satisfactory results on the turbulent flow over the two-dimensional hills. The prediction of the flow separation and reattachment-length for the steeper hill is closer to the measurements than the other numerical studies reported in the past for the same hill geometry. The field measurement campaign performed over the Bolund hill provides the most recent field-experiment dataset for the mean flow and the turbulence properties. A number of research groups have simulated the wind flows over the Bolund hill. Due to the challenging features of the hill such as the almost vertical hill slope, it is considered as an ideal experimental test case for validating micro-scale CFD models for wind energy applications. In this work, the simulated results obtained for two wind directions are compared against the field measurements. It is shown that the present LES can reproduce the complex turbulent wind flow structures over a complicated terrain such as the Bolund hill. Especially, the present LES results show the best prediction of the turbulent kinetic energy with an average error of 24.1%, which is a 43% smaller than any other model results reported in the past for the Bolund case. Finally, the validated LES methodology is demonstrated to simulate the wind flow over the existing Muukko wind farm located in South-Eastern Finland. The simulation is carried out only for one wind direction and the results on the instantaneous and time-averaged wind speeds are briefly reported. The demonstration case is followed by discussions on the practical aspects of LES for the wind resource assessment over a realistic inland wind farm.

Use of airborne laser scanner data in demanding forest conditions

Most of the applications of airborne laser scanner data to forestry require that the point cloud be normalized, i.e., each point represents height from the ground instead of elevation. To normalize the point cloud, a digital terrain model (DTM), which is derived from the ground returns in the point cloud, is employed. Unfortunately, extracting accurate DTMs from airborne laser scanner data is a challenging task, especially in tropical forests where the canopy is normally very thick (partially closed), leading to a situation in which only a limited number of laser pulses reach the ground. Therefore, robust algorithms for extracting accurate DTMs in low-ground-point-densitysituations are needed in order to realize the full potential of airborne laser scanner data to forestry. The objective of this thesis is to develop algorithms for processing airborne laser scanner data in order to: (1) extract DTMs in demanding forest conditions (complex terrain and low number of ground points) for applications in forestry; (2) estimate canopy base height (CBH) for forest fire behavior modeling; and (3) assess the robustness of LiDAR-based high-resolution biomass estimation models against different field plot designs. Here, the aim is to find out if field plot data gathered by professional foresters can be combined with field plot data gathered by professionally trained community foresters and used in LiDAR-based high-resolution biomass estimation modeling without affecting prediction performance. The question of interest in this case is whether or not the local forest communities can achieve the level technical proficiency required for accurate forest monitoring. The algorithms for extracting DTMs from LiDAR point clouds presented in this thesis address the challenges of extracting DTMs in low-ground-point situations and in complex terrain while the algorithm for CBH estimation addresses the challenge of variations in the distribution of points in the LiDAR point cloud caused by things like variations in tree species and season of data acquisition. These algorithms are adaptive (with respect to point cloud characteristics) and exhibit a high degree of tolerance to variations in the density and distribution of points in the LiDAR point cloud. Results of comparison with existing DTM extraction algorithms showed that DTM extraction algorithms proposed in this thesis performed better with respect to accuracy of estimating tree heights from airborne laser scanner data. On the other hand, the proposed DTM extraction algorithms, being mostly based on trend surface interpolation, can not retain small artifacts in the terrain (e.g., bumps, small hills and depressions). Therefore, the DTMs generated by these algorithms are only suitable for forestry applications where the primary objective is to estimate tree heights from normalized airborne laser scanner data. On the other hand, the algorithm for estimating CBH proposed in this thesis is based on the idea of moving voxel in which gaps (openings in the canopy) which act as fuel breaks are located and their height is estimated. Test results showed a slight improvement in CBH estimation accuracy over existing CBH estimation methods which are based on height percentiles in the airborne laser scanner data. However, being based on the idea of moving voxel, this algorithm has one main advantage over existing CBH estimation methods in the context of forest fire modeling: it has great potential in providing information about vertical fuel continuity. This information can be used to create vertical fuel continuity maps which can provide more realistic information on the risk of crown fires compared to CBH.

Measuring Shared Value: How to Unlock Value by Linking Social and Business Results

Competitividad y valor compartido

Behavioural, mensural, and ecological correlates of polygyny in the eastern meadowlark (Sturnella magna)

During 1982 and 1983 I studied male attributes and attributes of the territory of male Eastern Meadowlarks (Sturnella magna) in order to determine whether there was a correlation between any of the attributes investigated and the number of females attracted by a male. Seventeen males, nine of which were polygynous and eight monogamous, were studied in 1982 and sixteen males.of which .. seven were polygynous and nine ~onogamous, were studied in 1983. The study was conducted in Short Hills Park, 10 km southwest of St. Catharines, Ontario and was designed to compare two hypotheses: the "sexy son" hypothesis (Weatherhead and Robertson,1977) and the polygyny threshold model (Verner and Willson,1966, Orians, 1969). Male attributes investigated were male size and song behaviour. Six measures of male size were taken: weight, flattened and natural wing chord length, culmen length, bill depth and length of the tarsometatarsus. In 1983 song repertoire size and song versatility measures were investigated. Attributes of the territory studied were: territory size, density of plant stems, percentage plant cover and measures of vegetation structure. In 1983 Arthropods were collected from each territory and sorted according to taxonomic group and size. During 1983, territory attributes were sampled twice, once early and once later in the nesting season. Analysis of data involved univariate comparisons between monogamous and polygynous males using T-tests and multivariate comparisons were made using discriminant function analysis (DFA) and principle components analysis (PCA).No correlations were found between the number of females attracted with, .ny measure of male size or with me, .sures of song versatili or size of song repertoire. Also no correlation was found between terri size and the number of females nesting on a terri . Some attributes of the male's terri id distinguish between monog,mous and po s males of thistudy. Analysis of Arthropod numbers showed that e~ .eran counts were significantly great~r on polygynous territories, a1 the total numb~rs of Arthropods collected showed no s fico .nt differences between territories of monogamous and po males. DFA chose ear teran and Hymenopteran counts as multivariate discriminators; both variables we' e more vegetation revealed that there were no univariate differences between the two groups of males fOT 1982 stem densities, but ~ spp. and Solidago spp. were chosen DFA as multivariate discriminators. The total number of plant stems and of Vicia spp. stems were s ficantly the early 1983 ing on monogamous territories for however DFA found no multivariate discriminators" Variables concerned with the overall aspects of vegetation structure showed significant differences between territories of monogamous and polygynous males. DFA of the 1982 sampling of vegetation structure showed significantly greater mat depth and vegetation height on polygynous territories, a finding which was not supported, however, by peA. For the early 1983 sampling period, plant height was greater on polygynous territories. Multivariate analysis identified greater green cover on polygynous territories, greater ground cover on monogamous territories, and greater depth of mat material on monogamous territories as discriminators between territories of monogamous and polygynous males. A DFA on the major variables of the study showed no significant difference between the territories of monogamous and polygynous male Meadowlarks. Of the correlations found, some were for non-prey Arthr~ods, for cover plants with very small samples sizes, or for variables which were greater for monogamous males during one sampling period and polygynous males during the next. While multivariate discriminators were found, peA showed no grouping of monogamous or polygynous males according to any of the variables investigated. On the basis of the univariate and multivariate analysis of major variables, I concluded that there were no correlations between the number of females attracted with male attributes and no unambiguous correlation with attributes of the territory. My study does not unequivocally support either the "sexy son" or the polygyny threshold hypothesis.

Introduced taxa in disturbed ecosystems

In the literature, introduced taxa are assumed to be present, more abundant, and occupy greater physical space in portions of ecosystems disturbed by human activity. This study tested this principle in two sites, Short Hills provincial Park ("SHU) and Backus Woods ("B~l"). spatial distribution of introduced taxa of vegetation, isopods, and earthworms was determined with the runs test along 300m transects encompassing gradients of anthropogenic disturbance severity. The hypothesis was that introduced taxa would be aggregated along these transects; the null hypothesis was that they would not be aggregated. The null hypothesis was rejected for the introduced taxa as a unit, and vegetation and earthworms individually. Introduced taxa were aggregated along 53.33% (N~30) and 57.14% (N~21) of the transects in SH and BW (respectively). Introduced vegetation (90.00%, N~10 and 100.00%, N~7) and earthworms (50.00%, N~10 and 50.00%, N~8) were also significantly aggregated within the sites. Introduced isopods, however, were not significantly aggregated at either place (20. 00%, N-=10 and 16. 67%, ~J~6). This study demonstrated that introduced taxa are aggregated within ecosystems disturbed by human activity. However, since introduced isopods were not significantly aggregated it was also shown that taxa respond differently.

History and Theorizing: The Case of Winemaking in the Ontario Wine Industry

Despite the fact that theorization has been established as an important social mechanism in a variety of contexts, little research has explicated how this process works. I argue that theorization entails strategic constructions of history, or rhetorical history, in order to persuade audiences of legitimacy. I examine the role that history plays in actors’ theorizations of the Ontario wine industry as world class. By conducting a rhetorical analysis of the newsletters and websites of Ontario wineries, I find that various themes of history are routinely employed to re-theorize the industry as one that produces world class wines. In general, the findings suggest that the narratives of Ontario wineries tap into global repertoires of fine wine to portray the continuity of current practices with those of Old World winemaking. In addition, wineries sometimes tap into local histories to convey a sense of uniqueness, but they also obscure the history of poor winemaking in the region.

Niagara Bruce Trail Club Fonds, 1962-2014, n.d.

The Bruce trail is Canada’s longest and oldest continuous footpath. The trail runs along the Niagara Escarpment from Niagara to Tobermory through private and public land. The main trail is 890 km long and the side trails measure 400 km. In 1961, a “Save the Escarpment” conference was held in Hamilton. Gerry Wolfram, a writer for the St. Catharines Standard proposed that a committee be formed to develop a hiking trail. The Peninsula Field Naturalists Club formed a committee and President Bert Lowe contacted landowners along the proposed route to gain permission to cross their properties. Through Bert Lowe’s effort and dedication, the trail was completed in October 1963. The trail was officially opened on May 24th, 1964 in a ceremony at Queenston. The Niagara group joined the Bruce Trail Association in 1968 at which time the Niagara Bruce Trail Club was formed. The Bruce Trail Association is a charitable, membership-based volunteer organization. Their goal is to preserve public access to the Niagara Escarpment while restoring its natural habitat. The head office of the Bruce Trail Association is located in Hamilton, Ontario. The Niagara Bruce Trail Club’s goal is to secure and preserve a natural corridor along the Niagara Escarpment while providing education, awareness, and access for the public and the future. The club has organized many hikes including special hikes such as the one to commemorate the St. Catharines Centennial. The club has also hosted children’s hikes, cross country skiing hikes, wildflower hikes, jogging hikes, snowshoe hikes and bike outings. They hold annual events such as the End to End hike which is a 3 day walk from Grimsby to Queenston and the 30 km Laura Secord hike to commemorate Laura Secord’s famous walk. Charity hikes have also been held for the Heart and Stroke Foundation and the Lung Association as well as other causes. Major changes have taken place along the trail throughout the years, some of these include: a reroute which eliminated the tunnel passage (1976) and a bridge which eliminated the need to walk to Mountain Road to cross the Queen Elizabeth Way (2008). Other major changes and clean-up projects have been undertaken by the club. The Bruce Trail Conservancy (formerly Association) is made up of 9 clubs including: Niagara Bruce Trail Club (Queenston to Grimsby), Iroquia Bruce Trail Club (Grimsby to Kelso), Toronto Bruce Trail Club (Kelso to Cheltenham), Caledon Hills Bruce Trail Club (Cheltenham to Mono Centre), Dufferin Hi-Land Bruce Trail Club (Mono Centre to Lavender), Blue Mountains Bruce Trail Club (Lavender to Craigleath), Beaver Valley Bruce Trail Club (Craigleath to Blantyre), Sydenham Bruce Trail Club (Blantyre to Wiarton) and Peninsula Bruce Trail Club (Wiarton to Tobermory). Sources: http://www.niagarabrucetrail.org/index.html and http://brucetrail.org/

Niagara aerial photographs, 1921-1991, undated

This collection contains 129 aerial photographs of the Niagara region. The dates vary from 1921-1991, with some photos undated. Some of the areas covered include the Welland Canal, the Queen Elizabeth Way (QEW), Niagara Falls, the Short Hills, and St. Catharines. Most of the photos are black and white.

Investigating Microbial Trace-fossils and Abiotic Alteration in Hydrovolcanic Tuffs of the Fort Rock Volcanic Field, Oregon

Microbial ichnofossils in volcanic rocks provide a significant record of subsurface microbes and potentially extraterrestrial biosignatures. Here, the textures, mineralogy, and geochemistry of two continental basaltic hydrovolcanic deposits - Reed Rocks and Black Hills - in the Fort Rock Volcanic Field (FRVF) are investigated. Methods include petrographic microscopy, micro and powder X-ray diffraction, SEM/BSE/EDF imaging, energy dispersive spectroscopy, stable isotopes, and X-ray fluorescence. Petrographic analysis revealed granular and tubular textures with biogenic morphologies that include terminal enlargements, septate divisions, branching forms, spiral filaments, and ovoid bodies resembling endolithic microborings described in ocean basalts. They display evidence of behaviour and a geologic context expressing their relative age and syngenicity. Differences in abiotic alteration and the abundance/morphotype assemblage of putative microborings between the sites indicate that water/rock ratio, fluid composition and flux, temperature and secondary phase formation are influences on microboring formation. This study is the first report of reputed endolithic microborings in basalts erupted in a continental lacustrine setting.

Étude technologique et morphologique de la cornéenne dans le sud du Québec : le cas de la carrière préhistorique du mont Royal (BjFj-97) à Montréal.

Le site de la carrière du mont Royal (BjFj-97), découvert en 1993 par Yvon Codère et inventorié en 1997 par l’équipe d’Ethnoscop Inc., constitue une énigme archéologique intéressante pour quiconque s’intéresse à la préhistoire de l’île de Montréal et de sa région adjacente. Lors des activités archéologiques de 1997, quelques idées furent émises quant à son affiliation chronologique et sa nature, suggérant une occupation remontant à l’Archaïque terminal (4000 à 3000 AA) orientée vers l’extraction et la transformation de la cornéenne, une pierre métamorphique résultant de la transformation du substrat rocheux en place suite à des intrusions magmatiques lors du Crétacé qui ont créé les Montérégiennes. Le matériel, comprenant plus de 10 000 déchets de taille et un peu plus de 70 artéfacts divers, ne fît pas l’objet d’analyses poussées hormis la datation approximative du site par un examen sommaire des pointes de projectile. Ce mémoire reprend les données de 1997 et apporte une perspective nouvelle au site en décrivant morphologiquement et technologiquement le débitage de la pierre de façon à comprendre la chaîne opératoire de la cornéenne, une matière peu étudiée, mais fort commune au Québec méridional, appréhender les possibilités de la matière et aborder les questions de datation. L’ensemble du matériel lithique fît l’objet d’une analyse lithique poussée axée sur le débitage et les produits finis et propose la prépondérance de la taille bifaciale, ponctuée par un débitage sur éclat conséquent. L’ensemble des étapes de la chaîne opératoire est présent sur le site de la carrière du mont Royal. La cornéenne est une matière difficile à tailler en raison de son imprévisibilité, liée à la structure même de la matière, menant à un fort taux d’échecs lors de l’élaboration des outils. La datation de l’occupation principale du site pointe vers l’Archaïque terminal, mais le caractère équivoque des diverses classes d’objets rend difficile sa définition absolue, faute d’objets parfaitement diagnostiques. Le site BjFj-97 ressemble grandement à un site homologue en Nouvelle-Angleterre où la cornéenne fût travaillée suivant le même schéma opératoire, suggérant un apparentement culturel possible. La cornéenne abonde et domine dans les assemblages archéologiques de la région montréalaise, substituant ainsi des matières de meilleure qualité absentes régionalement. Leurs correspondances chronologiques transcendent celles établies lors de l’analyse du matériel de la carrière et montrent un étalement chronologiquement plus étendu, de l’Archaïque laurentien au Sylvicole supérieur. La cornéenne se retrouve habituellement sous forme d’outils bifaciaux fonctionnels (bifaces, couteaux et pointes de projectile) de piètre facture et d’outils sur éclats (grattoirs et racloirs) rudimentaires, suggérant une signification strictement utilitaire, le propre des matières de basse qualité. Les modes d’extraction de la cornéenne restent inconnus sur le mont Royal. Le mont Royal est plus qu’un vulgaire point défensif, il constitue la base de la subsistance des populations préhistoriques de jadis où se trouvent les matériaux nécessaires à la taille d’outils de prédation liés à un mode de vie mobile où domine la chasse.