Active edible films: Current state and future trends

Active edible films represent one of the current and future trends in the development of new polymers for selected applications, particularly food packaging. Some biopolymers show excellent performance as carriers for active compounds extracted from natural sources and are able to be released at a controlled rate to packaged food. In this review we aim to present, in a comprehensive way, the most recent advances and updates in this subject, where much research is currently ongoing and new studies are reported very often. This review focuses on innovative biopolymer matrices, their processing to obtain edible active films, and present and future applications.

Tungsten coil atomic emission spectrometry combined with dispersive liquid–liquid microextraction: A synergistic association for chromium determination in water samples

A novel and environment friendly analytical method is reported for total chromium determination and chromium speciation in water samples, whereby tungsten coil atomic emission spectrometry (WCAES) is combined with in situ ionic liquid formation dispersive liquid–liquid microextraction (in situ IL-DLLME). A two stage multivariate optimization approach has been developed employing a Plackett–Burman design for screening and selection of the significant factor involved in the in situ IL-DLLME procedure, which was later optimized by means of a circumscribed central composite design. The optimum conditions were complexant concentration: 0.5% (or 0.1%); complexant type: DDTC; IL anion: View the MathML sourcePF6−; [Hmim][Cl] IL amount: 60 mg; ionic strength: 0% NaCl; pH: 5 (or 2); centrifugation time: 10 min; and centrifugation speed: 1000 rpm. Under the optimized experimental conditions the method was evaluated and proper linearity was obtained with a correlation coefficient of 0.991 (5 calibration standards). Limits of detection and quantification for both chromium species were 3 and 10 µg L−1, respectively. This is a 233-fold improvement when compared with chromium determination by WCAES without using preconcentration. The repeatability of the proposed method was evaluated at two different spiking levels (10 and 50 µg L−1) obtaining coefficients of variation of 11.4% and 3.6% (n=3), respectively. A certified reference material (SRM-1643e NIST) was analyzed in order to determine the accuracy of the method for total chromium determination and 112.3% and 2.5 µg L−1 were the recovery (trueness) and standard deviation values, respectively. Tap, bottled mineral and natural mineral water samples were analyzed at 60 µg L−1 spiking level of total Cr content at two Cr(VI)/Cr(III) ratios, and relative recovery values ranged between 88% and 112% showing that the matrix has a negligible effect. To our knowledge, this is the first time that combines in situ IL-DLLME and WCAES.

Non-spectral interferences due to the presence of sulfuric acid in inductively coupled plasma mass spectrometry

Results of a systematic study concerning non-spectral interferences from sulfuric acid containing matrices on a large number of elements in inductively coupled plasma–mass spectrometry (ICP-MS) are presented in this work. The signals obtained with sulfuric acid solutions of different concentrations (up to 5% w w− 1) have been compared with the corresponding signals for a 1% w w− 1− nitric acid solution at different experimental conditions (i.e., sample uptake rates, nebulizer gas flows and r.f. powers). The signals observed for 128Te+, 78Se+ and 75As+ were significantly higher when using sulfuric acid matrices (up to 2.2-fold for 128Te+ and 78Se+ and 1.8-fold for 75As+ in the presence of 5 w w-1 sulfuric acid) for the whole range of experimental conditions tested. This is in agreement with previously reported observations. The signal for 31P+ is also higher (1.1-fold) in the presence of sulfuric acid. The signal enhancements for 128Te+, 78Se+, 75As+ and 31P+ are explained in relation to an increase in the analyte ion population as a result of charge transfer reactions involving S+ species in the plasma. Theoretical data suggest that Os, Sb, Pt, Ir, Zn and Hg could also be involved in sulfur-based charge transfer reactions, but no experimental evidence has been found. The presence of sulfuric acid gives rise to lower ion signals (about 10–20% lower) for the other nuclides tested, thus indicating the negative matrix effect caused by changes in the amount of analyte loading of the plasma. The elemental composition of a certified low-density polyethylene sample (ERM-EC681K) was determined by ICP-MS after two different sample digestion procedures, one of them including sulfuric acid. Element concentrations were in agreement with the certified values, irrespective of the acids used for the digestion. These results demonstrate that the use of matrix-matched standards allows the accurate determination of the tested elements in a sulfuric acid matrix.

Multi-Element Analysis of Spanish Date Palm (Phoenix dactylifera L.) by Inductively Coupled Plasma-Based Techniques. Discrimination Using Multivariate Statistical Analysis

The elemental analysis of Spanish palm dates by inductively coupled plasma atomic emission spectrometry and inductively coupled plasma mass spectrometry is reported for the first time. To complete the information about the mineral composition of the samples, C, H, and N are determined by elemental analysis. Dates from Israel, Tunisia, Saudi Arabia, Algeria and Iran have also been analyzed. The elemental composition have been used in multivariate statistical analysis to discriminate the dates according to its geographical origin. A total of 23 elements (As, Ba, C, Ca, Cd, Co, Cr, Cu, Fe, H, In, K, Li, Mg, Mn, N, Na, Ni, Pb, Se, Sr, V, and Zn) at concentrations from major to ultra-trace levels have been determined in 13 date samples (flesh and seeds). A careful inspection of the results indicate that Spanish samples show higher concentrations of Cd, Co, Cr, and Ni than the remaining ones. Multivariate statistical analysis of the obtained results, both in flesh and seed, indicate that the proposed approach can be successfully applied to discriminate the Spanish date samples from the rest of the samples tested.

Mercury determination in urine samples by gold nanostructured screen-printed carbon electrodes after vortex-assisted ionic liquid dispersive liquid–liquid microextraction

A novel approach is presented to determine mercury in urine samples, employing vortex-assisted ionic liquid dispersive liquid–liquid microextraction and microvolume back-extraction to prepare samples, and screen-printed electrodes modified with gold nanoparticles for voltammetric analysis. Mercury was extracted directly from non-digested urine samples in a water-immiscible ionic liquid, being back-extracted into an acidic aqueous solution. Subsequently, it was determined using gold nanoparticle-modified screen-printed electrodes. Under optimized microextraction conditions, standard addition calibration was applied to urine samples containing 5, 10 and 15 μg L−1 of mercury. Standard addition calibration curves using standards between 0 and 20 μg L−1 gave a high level of linearity with correlation coefficients ranging from 0.990 to 0.999 (N = 5). The limit of detection was empirical and statistically evaluated, obtaining values that ranged from 0.5 to 1.5 μg L−1, and from 1.1 to 1.3 μg L−1, respectively, which are significantly lower than the threshold level established by the World Health Organization for normal mercury content in urine (i.e., 10–20 μg L−1). A certified reference material (REC-8848/Level II) was analyzed to assess method accuracy finding 87% and 3 μg L−1 as the recovery (trueness) and standard deviation values, respectively. Finally, the method was used to analyze spiked urine samples, obtaining good agreement between spiked and found concentrations (recovery ranged from 97 to 100%).

Nuevos materiales para envasado activo de alimentos. "Proyecto Chill-On"

La seguridad alimentaria es una de las principales prioridades para la cadena de suministro de los alimentos refrigerados y congelados. Los productos deben llegar en las mejores condiciones de conservación y en un estado óptimo al consumidor. Pero cualquier alimento, antes de llegar a la mesa, ha seguido un complejo proceso logístico que va desde el envasado del producto, su traslado de la fábrica al almacén, al distribuidor y al punto de venta utilizando en este recorrido diferentes medios de transporte; terrestres, marítimos, ferroviarios, un conjunto de operaciones que forman parte de la cadena de suministro del producto. Y es aquí donde entra el proyecto Chill-On y donde cobra todo su interés. Su objetivo no es otro que aprovechar las nuevas tecnologías de la información como herramienta para mejorar la calidad, seguridad y transparencia de la cadena de suministro alimentaria. Las etiquetas eCHILL-ON y su integración en el envase hacen que las actividades de investigación se centren en los envases inteligentes. Se trata de una combinación de etiquetas con indicadores Tiempo-Temperatura (TTI) y etiquetas de Identificación por Radiofrecuencia (RFID), que permiten la localización y trazabilidad del producto en cualquiera de las diferentes etapas del proceso logístico. Lo que hace posible detectar cambios en el producto de manera inmediata y por lo tanto rectificar para que ese producto llegue en las mejores condiciones a su destino.

La Reacreditación en el Grado de Biología de la Facultad de Ciencias de la Universidad de Alicante

Implantación de los nuevos Grados, como sustitución de las Licenciaturas en los estudios universitarios, lleva consigo un proceso de Reacreditación, consistente en la revisión de una serie de parámetros de calidad, a realizar una vez terminada su implantación. Este proceso se ha desarrollado en tres ámbitos principales: la Gestión del Título, los Recursos de los que se dispone y, por último, los Resultados, y tiene como fin principal evaluar si los resultados obtenidos son adecuados para garantizar la continuidad de la impartición del Grado. El equipo de trabajo que ha llevado a cabo la revisión y ha puesto en marcha los procesos de mejora en el Grado de Biología de la Facultad de Ciencias de la Universidad de Alicante ha sido la Comisión de Título. La revisión que dicha Comisión ha realizado se ha centrado en evaluar la adquisición de competencias por parte de los estudiantes, en los recursos humanos y materiales que soportan el desarrollo del título, y en el análisis de la evolución de los resultados del mismo. Toda la información generada en este grupo de trabajo, ha sido volcada a la aplicación “AstUA” con la que se gestionan los programas de calidad de toda la Universidad de Alicante.

Caracterização elementar das alterações em tecidos carcinomatosos da cavidade oral por técnica de fluorescência de raio-x por dispersão em comprimento de onda

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Traité de chimie générale, analytique, industrielle et agricole.

Mode of access: Internet.

Anleitung zur chemischen Analyse, zum Gebrauche im chemischen Laboratorium zu giessen /

Mode of access: Internet.

Traité d'analyse chimique qualitative ... /

Mode of access: Internet.

Traité de chimie générale, analytique, industrielle et agricole.

Mode of access: Internet.

[Discurso sobre los límites del análisis químico] : discursos leídos ante la Academia de Ciencias Exactas, Físicas y Naturales en la recepción pública ; [Contestacíon al discurssoanterior /

Mode of access: Internet.

Traité d'analyse chimique quantitative ... /

Índice.

De l'allotropie et de l'isomérie /

Mode of access: Internet.