Designing single event upset mitigation techniques for large SRAM-Based FPGA components

This thesis presents the study and development of fault-tolerant techniques for programmable architectures, the well-known Field Programmable Gate Arrays (FPGAs), customizable by SRAM. FPGAs are becoming more valuable for space applications because of the high density, high performance, reduced development cost and re-programmability. In particular, SRAM-based FPGAs are very valuable for remote missions because of the possibility of being reprogrammed by the user as many times as necessary in a very short period. SRAM-based FPGA and micro-controllers represent a wide range of components in space applications, and as a result will be the focus of this work, more specifically the Virtex® family from Xilinx and the architecture of the 8051 micro-controller from Intel. The Triple Modular Redundancy (TMR) with voters is a common high-level technique to protect ASICs against single event upset (SEU) and it can also be applied to FPGAs. The TMR technique was first tested in the Virtex® FPGA architecture by using a small design based on counters. Faults were injected in all sensitive parts of the FPGA and a detailed analysis of the effect of a fault in a TMR design synthesized in the Virtex® platform was performed. Results from fault injection and from a radiation ground test facility showed the efficiency of the TMR for the related case study circuit. Although TMR has showed a high reliability, this technique presents some limitations, such as area overhead, three times more input and output pins and, consequently, a significant increase in power dissipation. Aiming to reduce TMR costs and improve reliability, an innovative high-level technique for designing fault-tolerant systems in SRAM-based FPGAs was developed, without modification in the FPGA architecture. This technique combines time and hardware redundancy to reduce overhead and to ensure reliability. It is based on duplication with comparison and concurrent error detection. The new technique proposed in this work was specifically developed for FPGAs to cope with transient faults in the user combinational and sequential logic, while also reducing pin count, area and power dissipation. The methodology was validated by fault injection experiments in an emulation board. The thesis presents comparison results in fault coverage, area and performance between the discussed techniques.

Desenvolvimento de elastômeros termoplásticos a partir de SBR epoxidada e polipropileno

Os elastômeros termoplásticos vulcanizados (TPVs) na sua maioria constituídos por borrachas apolares (EPDM, NR) e poliolefinas (PP, PE), apresentam a vantagem de serem processáveis como termoplásticos e serem facilmente reciclados. No entanto, apresentam desvantagens no que se refere à sua baixa resistência a óleos, combustíveis e graxas em relação à borracha termofixa. Este trabalho, teve como objetivo estudar a obtenção de TPVs com propriedades mecânicas adequadas e resistência a óleos e solventes orgânicos, a partir da borracha comercial SBR 1502 parcialmente epoxidada. Esta, por ter a estrutura química de sua cadeia principal modificada pela introdução de grupos epóxidos, deve apresentar melhor resistência a óleos e solventes. Os TPVs foram obtidos em misturador fechado acoplado a um reômetro Haake, na temperatura de 1800C e velocidade de rotor de 75 rpm, vulcanizados dinamicamente com o sistema Bismaleimida/peróxido de dicumila. Foram caracterizados quanto às suas propriedades mecânicas por medidas tensão-deformação, medidas mecânicas dinâmicas, inchamento em ciclohexano, THF e óleo IRM 903, dureza. A morfologia foi determinada por microscopia eletrônica de varredura, MEV. Foram analisados os fatores que influenciam as propriedades dos TPVs, tais como composição (relação PP/SBR), teor de BMI, grau de epoxidação da borracha, uso de agente compatibilizante. O TPV na composição PP/SBR 40/60, esta epoxidada em 40 mol % e contendo o agente compatibilizante Vestenamer adicionado na forma de blenda (borracha/agente compatibilizante) apresentou a melhor resposta em termos de tensão-deformação na ruptura. Os TPVs com a SBR epoxidada em 70% apresentaram melhor resistência a óleo e solventes. Os fatores, potencialmente, capazes de influenciar a dureza dos TPVs também foram avaliados. Neste particular, verificou-se que o tipo de poliolefina, bem como o uso de plastificante são os fatores que mais influenciam a dureza dos TPVs.

The impact of social security reform on occupational and retirement behavior : a quantitative assessment for Brazil

Population ageing is a problem that countries will have to cope with within a few years. How would changes in the social security system affect individual behaviour? We develop a multi-sectoral life-cycle model with both retirement and occupational choices to evaluate what are the macroeconomic impacts of social security reforms. We calibrate the model to match 2011 Brazilian economy and perform a counterfactual exercise of the long-run impacts of a recently adopted reform. In 2013, the Brazilian government approximated the two segregated social security schemes, imposing a ceiling on public pensions. In the benchmark equilibrium, our modelling economy is able to reproduce the early retirement claiming, the agents' stationary distribution among sectors, as well as the social security deficit and the public job application decision. In the counterfactual exercise, we find a significant reduction of 55\% in the social security deficit, an increase of 1.94\% in capital-to-output ratio, with both output and capital growing, a delay in retirement claims of public workers and a modification in the structure of agents applying to the public sector job.

Análise do processo judicial eletrônico (PJe) sob os parâmetros da discursividade processual e do acesso democrático à justiça

The conceptions of the judicial function, the process and the factors of legitimacy of the norm of decision are changed according to the model of State (liberal, social democratic and constitutional). The right of access to justice, likewise, follows the ideals present in constitutional movements experienced in different historical moments. The deficit of legitimacy of the judiciary is recurring subject of study in the doctrine, especially in the face of democratic standards that permeate the current paradigm of state. Under the process law, the essential element for the distinction of the states based on the rule of law (formal and material) and the democratic constitutional state lies in the democratic guarantee of participation to the litigants in the process of elaborating the norm of decision. The concern about the participatory democracy and the concretion of fundamental rights has as presupposition the conception of popular sovereignty. Keeping this effort in mind, the civil procedure cannot be oblivious to such considerations, especially when it justifies its constitutional conformation from the institutionalization of discourse within the procedural field (democratic principle) and of the democratization of access to justice, leading to the necessary contestation of the theory of instrumentality of the process. The democratic prospects of civil procedure and the concern about the legitimacy of the rule of decision cannot be moved away from the analysis of the judicial function and the elements that influence the legal suit s progress. The computerization of the judicial process entails extensive modification in the way the judicial function is developed, in view of automation of activities held, of the eliminating of bureaucratic tasks, manual and repetitive, and of streamlining the procedure. The objective of this study is to analyze the dogmatic changes and resulting practices from the implementation of the Judicial Electronic Process (JEP), prepared by the National Council of Justice, under the parameters of procedural discourse and democratic access to justice. Two hypotheses are raised, which, based on a bibliographic-documentary, applied and exploratory research, are contested dialectically. The expansion of publicity of procedural acts and the facilitating of communication and practice of such acts are elements that contribute to the effective participation of the recipients of the norm of decision in its making process and, therefore, the democratic principle in the procedural field. Ensuring access (to the parts) to the case files and reasonable duration of the process along with the preservation of its founding principles (contradictory, legal defense and isonomy) are essential to ensure democratic access to justice within the virtual system

Reação de plantas de amendoim (Arachis hypogaea L. ) ao trifluralin e mudanças na morfologia da parte subterrânea

Com o objetivo de reproduzir sintomas de malformação de raízes, observados em campo, foram estuda dos os efeitos do trifluralin sobre Arachis hypogaea L., cultivar Tatu, em condições de vaso, em Jaboticabal, SP. Quatro formulações de trifluralin foram aplicadas em solo Latossol Roxo - série Jaboticabal, barro argiloso, com 2,7% de matéria orgânica, em dosagem correspondentes a 1,5; 3,0 e 6,0 litros da formulação comercial por ha. Cada vaso contendo 2,5 1 -de solo, recebeu duas sementes pré -germinada s e foi mantido sob condições de casa-de-vegetação durante 29 dias. Foi adotado o delineamento inteiramente casualizado com treze tratamentos e quatro repetições, perfazendo total de 52 parcelas. Aos 29 dias as plantas, foram retiradas e determinadas as seguintes características: peso da matéria seca das raízes, dos caules, dos pecíolos e dos folíolos; número de folíolos; área foliar e comprimento da haste principal. Alterações morfológicas externas e internas foram observadas. Os resultados mostraram que as partes subter rân eas das plantas foram afetadas, com uma correlação linear negativa e significativa entre o aumento da dose dos herbicidas e peso da matéria. As folhas se mostraram pouco sensíveis, sendo que nenhuma das formulações diminuiu o número de foliolos da planta. A área foliar e o peso da matéria seca dos folíolos somente foram afetados pelo aumento da dose de T. Fecotrigo com va lores de F iguais a 9,62* e 7,61*, respectivamente. de modo geral,po de-se concluir que o maior efeito ocorre devido ao incremento nas doses e não devido a possiveis diferenças entre os tipos de formula ções testadas. Quanto a alterações morfológicas observou-se que nas doses mais elevadas houve grande diminuição na quantidade de raízes, com raízes secundárias curtas e grossas. O hipocótilo emitiu raízes até a altura do nó cotiledonar. Na dose de 3,0 1/ha já foram notadas raízes secundárias um pouco mais espessas que na dose de 1,5 1/ha. As lâminas histológicas de amostras da re gião do hipocótilo mostraram parên quima cortical bastante espesso, de vido ao maior numero de camadas de células, porém não se notou anormalidade na forma das células, nem nos demais tecidos da região estudada.

Estudo numérico do comportamento de muros de arrimo em alvenaria estrutural de blocos vazados

Usually masonry structures has low tension strength, hence the design to flexural efforts can results in high reinforcement ratio, specification of high unit and prism strength, structural members with larger section dimensions and modification in structural arrangement to be possible to use masonry members. The main objective of this study is to evaluate the stiffness, the efforts distribution and the effect of horizontal elements (girders) and vertical elements (counterforts) distribution on the behavior of masonry blocks retaining walls. For this purpose, numerical modeling was performed on typical retaining wall arrangements by varying the amount and placement of horizontal and vertical elements, beyond includes elements simulating the reactions of the soil supporting the foundation of the wall. The numerical modeling also include the macro modeling strategy in which the units, mortar and grout are discretized by a standard volume that represents the masonry elastic behavior. Also, numerical model results were compared with those ones of simplified models usually adopted in bending design of masonry elements. The results show horizontal displacements, principal and shear stresses distribution, and bending moments diagrams. From the analysis it was concluded that quantity and manner of distribution of the girders are both important factors to the panel flexural behavior, the inclusion of the foundation changed significantly the behavior of the wall, especially the horizontal displacements, and has been proposed a new way of considering the flanges section of the counterforts

Avaliação de diferentes tipos de atmosferas modificadas na vida útil de carambolas minimamente processadas

Este trabalho teve por objetivo a avaliação da vida útil potencial de carambolas cv. Golden Star, minimamente processadas, armazenadas em diferentes tipos de embalagens plásticas, para a concepção da atmosfera modificada. Os frutos colhidos fisiologicamente maturos apresentaram coloração verde-amarelada, sólidos solúveis (SS) médios de 6,8 ºBrix e massa média de 185 g. Antes da aplicação dos tratamentos, os frutos foram selecionados, higienizados em solução de hipoclorito de sódio (NaOCl) a 100 mg. L-1, resfriados por 12 horas a 15 ± 0,5 °C, seccionados transversalmente, sendo então novamente higienizados em solução de NaOCl a 10 mg.L-1, por 3 minutos. em seguida, os pedaços em forma de estrelas foram acondicionados em bandejas rígidas de poliestireno, com capacidade para 250 g, e revestidas com os seguintes materiais: T1: filme plástico perfurado de polietileno de baixa densidade (PEBD), de 0,006 mm; T2: filme plástico poliolefínico com antiembassamento da Dupont® (AGF), de 0,015 mm; T3: filme plástico poliolefínico da Dupont® (HF), de 0,015 mm; T4: filme plástico de PEBD, de 60 µm; T5: filme plástico de PEBD, de 80 µm; T6: filme plástico de polipropileno (PP), de 22 µm, e T7: bandeja rígida de polietileno tereftalato (PET), com capacidade para 500 mL, com tampa do mesmo material. As embalagens foram então armazenadas em câmara frigorífica a 12 ± 0,5 °C e 90 ± 3% de U.R, por 18 dias. Observou-se que não houve diferença significativa quanto aos sólidos solúveis (SS) e acidez titulável (AT). O maior número de microrganismos e valor de pH foram observados nos frutos embalados nos filmes plásticos de PEBD de 0,006 mm, AGF e HF de 0,015 mm da Dupont®. Entretanto, os frutos acondicionados nas embalagens PET apresentaram o maior teor de ácido ascórbico. da mesma forma, somente nas embalagens PET é que se conseguiu modificação atmosférica eficiente do ponto de vista da manutenção dos atributos de qualidade durante o AR. Assim, esse tratamento proporcionou adequado controle microbiológico e manutenção das características de qualidade por 18 dias para as carambolas minimamente processadas.

Avaliação dos atributos físicos de um Nitossolo Vermelho distroférrico sob sistema plantio direto, preparo convencional e mata nativa

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Soil Solution as Affected by Plant Residues and Nitrogen Rates

Cation mobility in acidic soils with low organic-matter contents depends not only on sorption intensity but also on the solubility of the species present in soil solution. In general, the following leaching gradient is observed: potassium (K+) magnesium (Mg2+) calcium (Ca2+) aluminum (Al3+). To minimize nutrient losses and ameliorate the subsoil, soil solution must be changed, favoring higher mobility of M2+ (metal ions) forms. This would be theoretically possible if plant residues were kept on the soil surface. An experiment was conducted in pots containing a Distroferric Red Latosol, with soil solution extractors installed at two depths. Pearl millet, black oat, and oilseed radish residues were laid on the soil surface, and nitrogen (as ammonium nitrate) was applied at rates ranging from 0 to 150mgkg-1. Corn was grown for 52 days. Except for K+ and ammonium (NH4 +), nitrogen rates and plant residues had little effect upon the concentrations and forms of the elements in the soil solution. Presence of cover crop residues on soil surface decreased the effect of nitrogen fertilizer on Ca leaching. More than 90% of the Ca2+, Mg2+, and K+ were found as free ions. The Al3+ was almost totally complexed as Al(OH3)0. Nitrogen application increased the concentrations of almost all the ions in soil solution, including Al3+, although there was no modification in the leaching gradient.

Analysis of the Al-PANI interfaces by complex impedance spectroscopy

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A Prodrug Approach to Improve the Physico-Chemical Properties and Decrease the Genotoxicity of Nitro Compounds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento dos filhotes de atobas-de-pés-vermelhos (Sula sula) no aquipélego de Fernando de Noronha/PE

Parental care s costs increase with the time spent due to incapacity of parents give assistance to increasing offspring food s requirement. This parental care deficits is crucial to offspring s emancipation that involve abilities development to they survive independently. In this work we observe 16 Red-footed boobies chick (Sula sula) on different stages of development, at area of Parque Nacional Marinho of Fernando de Noronha s archipelago, from August to October of 2005. Our data show the parents presence decrease during chick development and an activity frequency modification, in move and fly, which suggest the emancipation s chick development. We observe also the action of Kleptoparasits and the influence with offspring parental care. Our data show consistency with the literature. However, we consider that studies carried through during the peak of the reproductive station can support the hypothesis of that the conflicts, together with the initial period of development of the flight, can be representative in terms of mortality of chicks for the studied species

Modified stabilization method for the tibial tuberosity advancement technique: a biomechanical study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characterization of native and oxidized starches of two varieties of Peruvian carrot (Arracacia xanthorrhiza, B.) from two production areas of Paraná state, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Study of the mechanism of action of anoplin, a helical antimicrobial decapeptide with ion channel-like activity, and the role of the amidated C-terminus

Anoplin, an antimicrobial, helical decapeptide from wasp venom, looses its biological activities by mere deamidation of its C-terminus. Secondary structure determination, by circular dichroism spectroscopy in amphipathic environments, and lytic activity in zwitterionic and anionic vesicles showed quite similar results for the amidated and the carboxylated forms of the peptide. The deamidation of the C-terminus introduced a negative charge at an all-positive charged peptide, causing a loss of amphipathicity, as indicated by molecular dynamics simulations in TFE/water mixtures and this subtle modification in a peptide's primary structure disturbed the interaction with bilayers and biological membranes. Although being poorly lytic, the amidated form, but not the carboxylated, presented ion channel-like activity on anionic bilayers with a well-defined conductance step; at approximately the same concentration it showed antimicrobial activity. The pores remain open at trans-negative potentials, preferentially conducting cations, and this situation is equivalent to the interaction of the peptide with bacterial membranes that also maintain a high negative potential inside. Copyright (C) 2007 European Peptide Society and John Wiley & Sons, Ltd.