Cooperative memory and database transactions

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do Grau de Mestre em Engenharia Informática

Optimizing the embedded heaters position in the pultrusion process using finite element analysis

This study is based on a previous experimental work in which embedded cylindrical heaters were applied to a pultrusion machine die, and resultant energetic performance compared with that achieved with the former heating system based on planar resistances. The previous work allowed to conclude that the use of embedded resistances enhances significantly the energetic performance of pultrusion process, leading to 57% decrease of energy consumption. However, the aforementioned study was developed with basis on an existing pultrusion die, which only allowed a single relative position for the heaters. In the present work, new relative positions for the heaters were investigated in order to optimize heat distribution process and energy consumption. Finite Elements Analysis was applied as an efficient tool to identify the best relative position of the heaters into the die, taking into account the usual parameters involved in the process and the control system already tested in the previous study. The analysis was firstly developed with basis on eight cylindrical heaters located in four different location plans. In a second phase, in order to refine the results, a new approach was adopted using sixteen heaters with the same total power. Final results allow to conclude that the correct positioning of the heaters can contribute to about 10% of energy consumption reduction, decreasing the production costs and leading to a better eco-efficiency of pultrusion process.

Light memory function in a double pin SiC device

A double pi'npin heterostructure based on amorphous SiC has a non linear spectral gain which is a function of the signal wavelength that impinges on its front or back surface. An impulse of a configurable length and amplitude is applied to a 390 nm LED which illuminates one of the sensor surfaces, followed by a time period without any illumination after which an input signal with a different wavelength is impinged upon the front surface. Results show that the intensity and duration of the impulse illumination of the surfaces influences the sensor's response with different output for the same input signal. This paper studies this effect and proposes an application as a short term light memory. (C) 2015 Elsevier B.V. All rights reserved.

Developing Libraries Using Software Transactional Memory

Software transactional memory is a promising programming model that adapts many concepts borrowed from the databases world to control concurrent accesses to main memory (RAM) locations. This paper discusses how to support apparently irreversible operations, such as memory allocation and deallocation, within software libraries that will be used in (software memory) transactional contexts, and propose a generic and elegant approach based on a handler system, which provide the means to create and execute compensation actions at key moments during the life-time of a transaction.

Laser welding of shape memory alloys

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Mecânica

The use of the boundary element method in the analysis of single lap joints

The most common techniques for stress analysis/strength prediction of adhesive joints involve analytical or numerical methods such as the Finite Element Method (FEM). However, the Boundary Element Method (BEM) is an alternative numerical technique that has been successfully applied for the solution of a wide variety of engineering problems. This work evaluates the applicability of the boundary elem ent code BEASY as a design tool to analyze adhesive joints. The linearity of peak shear and peel stresses with the applied displacement is studied and compared between BEASY and the analytical model of Frostig et al., considering a bonded single-lap joint under tensile loading. The BEM results are also compared with FEM in terms of stress distributions. To evaluate the mesh convergence of BEASY, the influence of the mesh refinement on peak shear and peel stress distributions is assessed. Joint stress predictions are carried out numerically in BEASY and ABAQUS®, and analytically by the models of Volkersen, Goland, and Reissner and Frostig et al. The failure loads for each model are compared with experimental results. The preparation, processing, and mesh creation times are compared for all models. BEASY results presented a good agreement with the conventional methods.

Fazer uma história da própria vida. Narrativa pessoal e memória comunicativa em Paul Schatz im uhrenkasten

This essay offers a reflection on the concepts of identity and personal narrative, a line of argument that is closely interlaced with a subject‘s capacity to self-representation. As self-representation is necessarily composed upon remembrance processes, the question of memory as an element that directly influences the formation of an individual‘s identity becomes an emergent topic. Bearing this objective in mind, I shall highlight the notion of biographic continuity, the ability to elaborate a personal narrative, as an essential prerogative to attain a sense of identitary cohesion and coherence. On the other hand, I will argue that not only experienced memories play a key role in this process; intermediated, received narratives from the past, memories transmitted either symbolically or by elder members of the group or, what has been meanwhile termed ―postmemory‖, also influence the development of an individual‘s identitary map. This theoretical framework will be illustrated with the novel Paul Schatz im Uhrenkasten, written by German post-Holocaust author Jan Koneffke.

Como polir uma montanha: trabalho de projeto

Esta reflexão visa contextualizar o processo criativo da componente prática do Trabalho de Projecto – Objecto conferente do grau de Mestre em Teatro, especialização em Artes Performativas – Interpretação, e que consiste no solo Como polir uma montanha que teve lugar no Lavadouro Público de Carnide com Acolhimento do Teatro do Silêncio em Maio de 2014. O objectivo foi criar um espectáculo com base em acções de limpeza, utilizando os gestos quotidianos como elemento catalisador do processo criativo. Procurei, desta forma, espelhar algumas rotinas do dia-a-dia no campo abstracto das artes performativas, desconstruindo o espaço privado e servindo-me do corpo como ferramenta primordial na comunicação destas acções através do movimento. A premissa para este solo partiu da limpeza enquanto acção passível de gerar transformação no espaço e no tempo, e também no corpo e na mente. Inicialmente pensei que a limpeza era fundamental para a organização destes elementos, contudo o resultado levou-me a compreender que limpeza e organização podem ter pressupostos muito distintos. Fundamentei a minha pesquisa observando acções quotidianas de limpeza em contextos diversificados como a vivência rural, a vivência urbana e ao nível da memória – a minha e a de outros indivíduos – de como processamos determinados comportamentos observados desde a infância. Durante o processo de criação de Como polir uma montanha, surgiram diversas inquietações que me levaram a reflectir também sobre a problemática de ser criadora e intérprete a solo, e de como esta questão é transversal à noção de si mesmo perante o outro. Esta noção leva-me a questionar o limiar que separa, mas também une, o palco e a plateia. Por isso integrei o público na acção cénica, através de elementos que propunham uma observação participativa do espectáculo.

Toroid inductor development for a SIC DC-DC converter up to 150kW, based on finite element method

Dissertação para a obtenção do grau de Mestre em Engenharia Electrotécnica Ramo de Energia

Optimizing memory transactions for large-scale programs

Even though Software Transactional Memory (STM) is one of the most promising approaches to simplify concurrent programming, current STM implementations incur significant overheads that render them impractical for many real-sized programs. The key insight of this work is that we do not need to use the same costly barriers for all the memory managed by a real-sized application, if only a small fraction of the memory is under contention lightweight barriers may be used in this case. In this work, we propose a new solution based on an approach of adaptive object metadata (AOM) to promote the use of a fast path to access objects that are not under contention. We show that this approach is able to make the performance of an STM competitive with the best fine-grained lock-based approaches in some of the more challenging benchmarks. (C) 2015 Elsevier Inc. All rights reserved.

Light memory operation based on a double pin SiC device

Experimental optoelectronic characterization of a p-i'(a-SiC:H)-n/pi(a-Si:H)-n heterostructure with low conductivity doped layers shows the feasibility of tailoring channel bandwidth and wavelength by optical bias through back and front side illumination. Front background enhances light-to-dark sensitivity of the long and medium wavelength range, and strongly quenches the others. Back violet background enhances the magnitude in short wavelength range and reduces the others. Experiments have three distinct programmed time slots: control, hibernation and data. Throughout the control time slot steady light wavelengths illuminate either or both sides of the device, followed by the hibernation without any background illumination. The third time slot allows a programmable sequence of different wavelengths with an impulse frequency of 6000Hz to shine upon the sensor. Results show that the control time slot illumination has an influence on the data time slot which is used as a volatile memory with the set, reset logical functions. © IFIP International Federation for Information Processing 2015.

Static detection of anomalies in transactional memory programs

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do Grau de Mestre em Engenharia Informática

Burrows-wheeler transform in secondary memory

Master’s Thesis in Computer Engineering

Vibration control with shape-memory alloys in civil engineering structures

Dissertação apresentada à Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Doutor em Engenharia Civil

Liquid crystal mobility and PDLC memory effects

Dissertation presented at Faculdade de Ciências e Tecnologia of Universidade Nova de Lisboa to obtain the Degree of Master in Chemical and Biochemical Engineering