Efeitos da prática do Jiu-Jitsu brasileiro no controle cognitivo de estudantes do Ensino Secundário da Rede Pública de Abu Dhabi, Emirados Árabes Unidos

Uma das formas de atividade física que tem revelado expressivos resultados na mediação comportamental e cognitiva são as Artes Marciais (AM). Dentre elas, o Jiu-Jitsu Brasileiro ou BJJ (Brazilian Jiu-Jitsu) tem se mostrado cada vez mais popular entre jovens de idade escolar, no entatanto nenhum estudo sobre os seus efeitos nas Funções Executivas (FE) foi encontrado. O objetivo desse estudo foi primeiramente, encontrar diferenças nas FE com a pratica do BJJ; secundariamente, pretendeu-se observar o tipo de correlação entre as FE e os niveis de participação; e por fim posicionar os resultados deste estudo a outros trabalhos similares da literatura científica. O estudo avaliou 125 alunos de uma escola pública de Abu Dhabi, antes e após 6 meses de prática, através de um modelo não randomizado. Após todas as exclusões, 59 alunos foram separados em 3 niveis de participação e correlacionados com os resultados do teste de Stroop (VST - Victoria Stroop Test). Os resultados deste estudo mostraram que 30 sessões de BJJ, foram suficientes para oferecer significativas diferenças no Controle Inibitório (CI). Sua boa participação (2 a 3 vezes por semana), não somente mostrou grande tamanho de efeito (SE) comparado a baixa e media participação, como maiores SE comparado a outras formas de Atividade Fisica e Artes Marciais Tradicionais como o Tae Kwon Do e Wu Shu (Kung Fu). Com uma moderada correlação, sua participação apontou uma capacidade de influenciar em 20,8% o (CI) sobre atividades automáticas, bem como 27,3% a distração sobre atividades irrelevantes. Esses achados sugerem que a pratica do BJJ possa levar a melhoras nas Funções Executivas de pré-adolescentes nativos dos Emirados Arabes Unidos.

Experimental and modeling studies of forced convection storage and drying systems for sweet potatoes

Sweet potato is an important strategic agricultural crop grown in many countries around the world. The roots and aerial vine components of the crop are used for both human consumption and, to some extent as a cheap source of animal feed. In spite of its economic value and growing contribution to health and nutrition, harvested sweet potato roots and aerial vine components has limited shelf-life and is easily susceptible to post-harvest losses. Although post-harvest losses of both sweet potato roots and aerial vine components is significant, there is no information available that will support the design and development of appropriate storage and preservation systems. In this context, the present study was initiated to improve scientific knowledge about sweet potato post-harvest handling. Additionally, the study also seeks to develop a PV ventilated mud storehouse for storage of sweet potato roots under tropical conditions. In study one, airflow resistance of sweet potato aerial vine components was investigated. The influence of different operating parameters such as airflow rate, moisture content and bulk depth at different levels on airflow resistance was analyzed. All the operating parameters were observed to have significant (P < 0.01) effect on airflow resistance. Prediction models were developed and were found to adequately describe the experimental pressure drop data. In study two, the resistance of airflow through unwashed and clean sweet potato roots was investigated. The effect of sweet potato roots shape factor, surface roughness, orientation to airflow, and presence of soil fraction on airflow resistance was also assessed. The pressure drop through unwashed and clean sweet potato roots was observed to increase with higher airflow, bed depth, root grade composition, and presence of soil fraction. The physical properties of the roots were incorporated into a modified Ergun model and compared with a modified Shedd’s model. The modified Ergun model provided the best fit to the experimental data when compared with the modified Shedd’s model. In study three, the effect of sweet potato root size (medium and large), different air velocity and temperature on the cooling/or heating rate and time of individual sweet potato roots were investigated. Also, a simulation model which is based on the fundamental solution of the transient equations was proposed for estimating the cooling and heating time at the centre of sweet potato roots. The results showed that increasing air velocity during cooling and heating significantly (P < 0.05) affects the cooling and heating times. Furthermore, the cooling and heating times were significantly different (P < 0.05) among medium and large size sweet potato roots. Comparison of the simulation results with experimental data confirmed that the transient simulation model can be used to accurately estimate the cooling and heating times of whole sweet potato roots under forced convection conditions. In study four, the performance of charcoal evaporative cooling pad configurations for integration into sweet potato roots storage systems was investigated. The experiments were carried out at different levels of air velocity, water flow rates, and three pad configurations: single layer pad (SLP), double layers pad (DLP) and triple layers pad (TLP) made out of small and large size charcoal particles. The results showed that higher air velocity has tremendous effect on pressure drop. Increasing the water flow rate above the range tested had no practical benefits in terms of cooling. It was observed that DLP and TLD configurations with larger wet surface area for both types of pads provided high cooling efficiencies. In study five, CFD technique in the ANSYS Fluent software was used to simulate airflow distribution in a low-cost mud storehouse. By theoretically investigating different geometries of air inlet, plenum chamber, and outlet as well as its placement using ANSYS Fluent software, an acceptable geometry with uniform air distribution was selected and constructed. Experimental measurements validated the selected design. In study six, the performance of the developed PV ventilated system was investigated. Field measurements showed satisfactory results of the directly coupled PV ventilated system. Furthermore, the option of integrating a low-cost evaporative cooling system into the mud storage structure was also investigated. The results showed a reduction of ambient temperature inside the mud storehouse while relative humidity was enhanced. The ability of the developed storage system to provide and maintain airflow, temperature and relative humidity which are the key parameters for shelf-life extension of sweet potato roots highlight its ability to reduce post-harvest losses at the farmer level, particularly under tropical climate conditions.

Population parameters of the smooth lantern shark, Etmopterus pusillus, in southern Portugal (NE Atlantic)

Etmopterus pusillus is a deep water lantern shark with a widespread global distribution that is caught in large quantities in some areas, but is usually discarded due to the low commercial value. In this work, the population biology was studied and life history parameters determined for the first time in this species. Age was estimated from sections of the second dorsal spine and validated by marginal increment analysis. Males attained a maximum age of 13 years, while 17-year-old females were found. Several growth models were fitted and compared for both size and weight at age data, showing that even though this is a small sized species, it has a relatively slow growth rate. This species matures late and at a relatively large size: at 86.81% and 79.40% of the maximum observed sizes and at 58.02% and 54.40% of the maximum observed ages for males and females, respectively. It has a low fecundity, with a mean ovarian fecundity of 10.44 oocytes per reproductive cycle. The estimated parameters indicate that this species has a vulnerable life cycle, typical of deep water squalid sharks. Given the high fishing pressures that it is suffering in the NE Atlantic, the smooth lantern shark may be in danger of severe declines in the near future. (c) 2007 Elsevier B.V. All rights reserved.

Using sclerochronology to estimate the growth rate in Pinna nobilis: a case study of Les Alfaques Bay population (Ebro Delta, Spain).

Pinna nobilis is the biggest Mediterranean bivalve, endemic and semi-infaunal. Provide hard substrates to colonize, increasing the spatial heterogeneity of the softbottom communities. P. nobilis suffer a drastic decline due to the anthropogenic pressures. It’s included in the Habitats Directive, in the Barcelona Convention, and in the red lists of many Mediterranean countries. Estimates the growth rate allows to understand the population dynamics of species and yield knowledge to improve protection efforts. In this study a new methodology based on sclerochronology was used to estimate the age and the growth rate of a P. nobilis population located in Les Alfaques bay. The shells of 35 specimens were cataloged. A subsample of 20 individuals was selected, and one valve of each specimens was cut into radial sections along PAMS (Posterior Adductor Muscle Scar) to study the inner register. Thus, the positions of PAMS obscured by nacre were identified, and the number of missing records was estimated by the width of the calcitic layer in the anterior part of the shell. The first growth curve for the Les Alfaques bay population was calculated from the length/age data. To simulate the growth rate of this population, the growth model based on the modified Von Bertalanffy equation was used. Shallow water usually hosts small sized populations of P. nobilis, while in deeper waters specimens reaches larger size. In Les Alfaques bay the population is composed by large size individuals though it’s located in shallows waters. This unusual size pattern is probably due to a sand bar that offers protection from hydrodynamic stress, allowing individuals to elongate more. This study contributes to the knowledge on P. nobilis biology and, with the aim to monitor this species, the growth curve could be used as baseline for future studies on habitat characteristics that may affect the population structure and dynamics in Les Alfaques Bay.

Modelling of ORC components and systems for low-medium temperature heat recovery applications with reduced environmental impact

Although its great potential as low to medium temperature waste heat recovery (WHR) solution, the ORC technology presents open challenges that still prevent its diffusion in the market, which are different depending on the application and the size at stake. Focusing on the micro range power size and low temperature heat sources, the ORC technology is still not mature due to the lack of appropriate machines and working fluids. Considering instead the medium to large size, the technology is already available but the investment is still risky. The intention of this thesis is to address some of the topical themes in the ORC field, paying special attention in the development of reliable models based on realistic data and accounting for the off-design performance of the ORC system and of each of its components. Concerning the “Micro-generation” application, this work: i) explores the modelling methodology, the performance and the optimal parameters of reciprocating piston expanders; ii) investigates the performance of such expander and of the whole micro-ORC system when using Hydrofluorocarbons as working fluid or their new low GWP alternatives and mixtures; iii) analyzes the innovative ORC reversible architecture (conceived for the energy storage), its optimal regulation strategy and its potential when inserted in typical small industrial frameworks. Regarding the “Industrial WHR” sector, this thesis examines the WHR opportunity of ORCs, with a focus on the natural gas compressor stations application. This work provides information about all the possible parameters that can influence the optimal sizing, the performance and thus the feasibility of installing an ORC system. New WHR configurations are explored: i) a first one, relying on the replacement of a compressor prime mover with an ORC; ii) a second one, which consists in the use of a supercritical CO2 cycle as heat recovery system.

Ship performance modelling for least-CO2 emission routes

Decarbonization of maritime transport requires immediate action. In the short term, ship weather routing can provide greenhouse gas emission reductions, even for existing ships and without retrofitting them. Weather routing is based on making optimal use of both envi- ronmental information and knowledge about vessel seakeeping and performance. Combining them at a state-of-the-art level and making use of path planning in realistic conditions can be challenging. To address these topics in an open-source framework, this thesis led to the development of a new module called bateau , and to its combination with the ship routing model VISIR. bateau includes both hull geometry and propulsion modelling for various vessel types. It has two objectives: to predict the sustained speed in a seaway and to estimate the CO2 emission rate during the voyage. Various semi-empirical approaches were used in bateau to predict the ship hydro- and aerodynamical resistance in both head and oblique seas. Assuming that the ship sails at a constant engine load, the involuntary speed loss due to waves was estimated. This thesis also attempted to clarify the role played by the actual representation of the sea state. In particular, the influence of the wave steepness parameter was assessed. For dealing with ships with a greater superstructure, the wind added resistance was also estimated. Numerical experiments via bateau were conducted for both a medium and a large-size container ships, a bulk-carrier, and a tanker. The simulations of optimal routes were carried out for a feeder containership during voyages in the North Indian Ocean and in the South China Sea. Least-CO2 routes were compared to the least-distance ones, assessing the relative CO2 savings. Analysis fields from the Copernicus Marine Service were used in the numerical experiments.

Epidemiological studies on toxoplasma gondii infection in a one health perspective

The objective of the present Ph.D. thesis was to investigate with a One Health approach the epidemiological patterns of T. gondii infection in Italy, to better understand the transmission dynamics of the parasite, following different research lines. The results of a retrospective analysis in animals and human showed the widespread distribution of T. gondii in the study area, with specific antibodies found in various animal species and human populations, indicating its constant presence across diverse environments. The environment plays a significant role in T. gondii's epidemiology. Migratory aquatic birds, rodents, wolves, and wild boars were investigated as sentinels of their spread, highlighting the potential transmission across geographic areas and infection risks for wildlife in natural settings. The study also provided insights into seroprevalence in wolves. Dogs, subjected to serological investigations exhibited risk factors for T. gondii infection, such as cohabitation with cats, coprophagy behaviours, and continuous outdoor. Correlation between serological evidence of exposure to T. gondii and pathological anxiety in large-size dogs was observed, and the consumption of raw meat was associated with a higher risk of infection in these animals. Results of the investigations conducted in this thesis, demonstrate the dynamic nature of T. gondii infection in cattle, characterized by new infections and declining antibody levels over the production cycle. The study also describes a co-infection between T. gondii and Sarcocystis hominis in bovine eosinophilic myositis. In the final part of the Thesis, a comprehensive genotyping of T. gondii in Italy reveals the predominance of Type II strains, particularly in cases of ovine abortion and fatal toxoplasmosis among captive Lemur catta. This approach enhances our understanding of the parasite's genetic diversity and transmission patterns, vital for effective management of its impact on human and animal health in Italy.

Electrical impedance particle size method (Coulter Counter) detects the large fat globules in poorly homogenised UHT processed milk

The large fat globules that can be present in UHT milk due to inadequate homogenisation cause a cream layer to form that limits the shelf life of UHT milk. Four different particle size measurement techniques were used to measure the size of fat globules in poorly homogenised UHT milk processed in a UHT pilot plant. The thickness of the cream layer that formed during storage was negatively correlated with homogenisation pressure. It was positively correlated with the mass mean diameter and the percentage volume of particles between 1.5 and 2 mu m diameter, as determined by laser light scattering using the Malvern Mastersizer. Also, the thickness of the cream layer was positively correlated with the volume mode diameter and the percentage volume of particles between 1.5 and 2 mu m diameter, as determined by electrical impedance using the Coulter Counter. The cream layer thickness did not correlate significantly with the Coulter Counter measurements of volume mean diameter, or volume percentages of particles between 2 and 5 mu m or 5 and 10 mu m diameter. Spectroturbidimetry (Emulsion Quality Analyser) and light microscopy analyses were found to be unsuitable for assessing the size of the fat particles. This study suggests that the fat globule size distribution as determined by the electrical impedance method (Coulter Counter) is the most useful for determining the efficiency of homogenisation and therefore for predicting the stability of the fat emulsion in UHT milk during storage.

Estimation of the pore size of the large-conductance mechanosensitive ion channel of Escherichia coli

The open channel diameter of Escherichia coli recombinant large-conductance mechanosensitive ion channels (MscL) was estimated using the model of Hille (Hille, B. 1968. Pharmacological modifications of the sodium channels of frog nerve. J. Gen. Physiol. 51:199-219)that relates the pore size to conductance. Based on the MscL conductance of 3.8 nS, and assumed pore lengths, a channel diameter of 34 to 46 Angstrom was calculated. To estimate the pore size experimentally, the effect of large organic ions on the conductance of MscL was examined. Poly-L-lysines (PLLs) with a diameter of 37 Angstrom or larger significantly reduced channel conductance, whereas spermine (similar to 15 Angstrom), PLL19 (similar to 25 Angstrom) and 1,1'-bis-(3-(1'-methyl-(4,4'-bipyridinium)-1-yl)-propyl)-4,4'-bipyridinium (similar to 30 Angstrom) had no effect. The smaller organic ions putrescine, cadaverine, spermine, and succinate all permeated the channel. We conclude that the open pore diameter of the MscL is similar to 40 Angstrom, indicating that the MscL has one of the largest channel pores yet described. This channel diameter is consistent with the proposed homohexameric model of the MscL.

Adiponectin: serum levels, promoter polymorphism, and associations with birth size and cardiometabolic outcome in young adults born large for gestational age

Objective: To assess whether the -11391G > A polymorphism in the regulatory region of the adiponectin gene (ADIPOQ) is associated with birth size, postnatal growth, adiponectinemia, and cardiometabolic risk in adult life. Design: Case-control study nested within a prospective cohort of 2063 community subjects born in 1978/1979 and followed since birth to date. Methods: ADIPOQ -11391G > A genotype-phenotype associations were evaluated in 116 subjects born large for gestational age (LGA) and 392 gender-matched controls at birth (birth size), at 8-10 years (catch-down growth), and at 23-25 years of age (cardiometabolic profile). Results: The -11391A variant allele frequency was higher in LGA subjects (P=0.04). AA genotype was associated with augmented probability of being born LGA (odds ratio=4.14; 95% confidence interval: 1.16-16.7; P=0.03). This polymorphism was associated neither with body composition nor with postnatal growth pattern. At the age of 23-25 years, the -11391A variant allele was associated with higher serum adiponectin levels (GG: 10.7 +/- 6.2 versus GA: 12.2 +/- 6.5 versus AA: 14.2 +/- 6.8 mu g/ml; P < 0.01). Subjects born LGA presented higher body mass index (BMI; P=0.01), abdominal circumference (P=0.04), blood pressure (P=0.04), and homeostasis assessment model for insulin resistance (P=0.01) than adequate for gestational age. Symmetry at birth did not influence these variables. The occurrence of catch-down of weight was associated with lower BMI and abdominal circumference (P < 0.001) at 23-25 years. Conclusions: The -11391A ADIPOQ gene variant was associated with increased chance of being born LGA and with higher adiponectin levels in early adult life.

Myocardial infarct size and mortality depend on the time of day-a large multicenter study.

BACKGROUND: Different studies have shown circadian variation of ischemic burden among patients with ST-Elevation Myocardial Infarction (STEMI), but with controversial results. The aim of this study was to analyze circadian variation of myocardial infarction size and in-hospital mortality in a large multicenter registry. METHODS: This retrospective, registry-based study was based on data from AMIS Plus, a large multicenter Swiss registry of patients who suffered myocardial infarction between 1999 and 2013. Peak creatine kinase (CK) was used as a proxy measure for myocardial infarction size. Associations between peak CK, in-hospital mortality, and the time of day at symptom onset were modelled using polynomial-harmonic regression methods. RESULTS: 6,223 STEMI patients were admitted to 82 acute-care hospitals in Switzerland and treated with primary angioplasty within six hours of symptom onset. Only the 24-hour harmonic was significantly associated with peak CK (p = 0.0001). The maximum average peak CK value (2,315 U/L) was for patients with symptom onset at 23:00, whereas the minimum average (2,017 U/L) was for onset at 11:00. The amplitude of variation was 298 U/L. In addition, no correlation was observed between ischemic time and circadian peak CK variation. Of the 6,223 patients, 223 (3.58%) died during index hospitalization. Remarkably, only the 24-hour harmonic was significantly associated with in-hospital mortality. The risk of death from STEMI was highest for patients with symptom onset at 00:00 and lowest for those with onset at 12:00. DISCUSSION: As a part of this first large study of STEMI patients treated with primary angioplasty in Swiss hospitals, investigations confirmed a circadian pattern to both peak CK and in-hospital mortality which were independent of total ischemic time. Accordingly, this study proposes that symptom onset time be incorporated as a prognosis factor in patients with myocardial infarction.

Some hypothesis tests for the covariance matrix when the dimension is large compared to the sample size

This paper analyzes whether standard covariance matrix tests work whendimensionality is large, and in particular larger than sample size. Inthe latter case, the singularity of the sample covariance matrix makeslikelihood ratio tests degenerate, but other tests based on quadraticforms of sample covariance matrix eigenvalues remain well-defined. Westudy the consistency property and limiting distribution of these testsas dimensionality and sample size go to infinity together, with theirratio converging to a finite non-zero limit. We find that the existingtest for sphericity is robust against high dimensionality, but not thetest for equality of the covariance matrix to a given matrix. For thelatter test, we develop a new correction to the existing test statisticthat makes it robust against high dimensionality.

Addressing trypsin bias in large scale (phospho)proteome analysis by size exclusion chromatography and secondary digestion of large post-trypsin peptides.

In the vast majority of bottom-up proteomics studies, protein digestion is performed using only mammalian trypsin. Although it is clearly the best enzyme available, the sole use of trypsin rarely leads to complete sequence coverage, even for abundant proteins. It is commonly assumed that this is because many tryptic peptides are either too short or too long to be identified by RPLC-MS/MS. We show through in silico analysis that 20-30% of the total sequence of three proteomes (Schizosaccharomyces pombe, Saccharomyces cerevisiae, and Homo sapiens) is expected to be covered by Large post-Trypsin Peptides (LpTPs) with M(r) above 3000 Da. We then established size exclusion chromatography to fractionate complex yeast tryptic digests into pools of peptides based on size. We found that secondary digestion of LpTPs followed by LC-MS/MS analysis leads to a significant increase in identified proteins and a 32-50% relative increase in average sequence coverage compared to trypsin digestion alone. Application of the developed strategy to analyze the phosphoproteomes of S. pombe and of a human cell line identified a significant fraction of novel phosphosites. Overall our data indicate that specific targeting of LpTPs can complement standard bottom-up workflows to reveal a largely neglected portion of the proteome.

Body size and early growth in appropriate- and large-for-gestational-age infants.

AIMS: To study weight, length, body composition, sleeping energy expenditure (SEE), and respiratory quotient (RQ) at birth and at 5 mo of age in both adequate-for-gestational-age (AGA) and large-for-gestational-age (LGA) subjects; to compare the changes in body weight and body composition adjusting for gender, age, SEE, RQ and several maternal factors; to investigate the contribution of initial SEE and RQ to changes in body weight and body composition. METHODS: Sixty-nine neonates were recruited among term infants in the University Hospital of Verona, Italy. Forty-nine subjects participated until follow-up. At birth and follow-up, weight and length were measured and arm-fat area and arm-muscle area were calculated from triceps and subscapular skinfolds. SEE and RQ were measured by indirect calorimetry. RESULTS: At birth, weight, length, arm-muscle and arm-fat areas were significantly higher in LGA subjects than in AGA subjects. Weight status, SEE and RQ at birth did not explain the relative weight change after adjusting for gestational weight, placental weight, age at follow-up and gender. Arm-fat area and weight/length ratio at birth were negatively associated with relative changes in body weight after adjusting for the above variables (p < 0.05). CONCLUSION: Early growth from birth to 5 mo of life is significantly affected by body size and adiposity at birth. Fatter newborns had a slower growth rate than thinner newborns.