Design of microchannel free-space optical interconnects based on vertical-cavity surface-emitting laser arrays

We investigate the design of free-space optical interconnects (FSOIs) based on arrays of vertical-cavity surface-emitting lasers (VCSELs), microlenses, and photodetectors. We explain the effect of the modal structure of a multimodeVCSEL beam on the performance of a FSOI with microchannel architecture. A Gaussian-beam diffraction model is used in combination with the experimentally obtained spectrally resolved VCSEL beam profiles to determine the optical channel crosstalk and the signal-to-noise ratio (SNR) in the system. The dependence of the SNR on the feature parameters of a FSOI is investigated. We found that the presence of higher-order modes reduces the SNR and the maximum feasible interconnect distance. We also found that the positioning of a VCSEL array relative to the transmitter microlens has a significant impact on the SNR and the maximum feasible interconnect distance. Our analysis shows that the departure from the traditional confocal system yields several advantages including the extended interconnect distance and/or improved SNR. The results show that FSOIs based on multimode VCSELs can be efficiently utilized in both chip-level and board-level interconnects. (C) 2002 Optical Society of America.

Strategy Lab Experiences: Bathtub Dynamics

As the world changes ever faster, managers increasingly recognize the complexity and turbulence of the business systems in which they are embedded. The management problems are dynamic, while the dynamic complexity comes frequently from few variables with circle and delays interrelations that introduce nonlinearities.The present paper describes a research conducted in Portugal with two different groups - one, academic; the other, professional - where we explored the subjects’ understanding of some basic systems thinking concepts such as stock-flow relationship, feedback processes and time delays.

Remote lab experiments: opening possibilities for distance learning in engineering fields

Remote experimentation laboratories are systems based on real equipment, allowing students to perform practical work through a computer connected to the internet. In engineering fields lab activities play a fundamental role. Distance learning has not demonstrated good results in engineering fields because traditional lab activities cannot be covered by this paradigm. These activities can be set for one or for a group of students who work from different locations. All these configurations lead to considering a flexible model that covers all possibilities (for an individual or a group). An inter-continental network of remote laboratories supported by both European and Latin American institutions of higher education has been formed. In this network context, a learning collaborative model for students working from different locations has been defined. The first considerations are presented.

Using NEXUS compliant debuggers for real time fault injection on microprocessors

As electronic devices get smaller and more complex, dependability assurance is becoming fundamental for many mission critical computer based systems. This paper presents a case study on the possibility of using the on-chip debug infrastructures present in most current microprocessors to execute real time fault injection campaigns. The proposed methodology is based on a debugger customized for fault injection and designed for maximum flexibility, and consists of injecting bit-flip type faults on memory elements without modifying or halting the target application. The debugger design is easily portable and applicable to different architectures, providing a flexible and efficient mechanism for verifying and validating fault tolerant components.

Design state exploration applied to the development of a remote lab for projectile launch experiments

This paper describes the application of Design State Exploration techniques in the development of a remote lab for projectile motion experiments. The application was enabled by the existence of two independent teams: one composed of a series of internships that started first and another with two grantees that started a few months later. The paper presents evidence on how this approach provided gains in the development process conducted by the second team that benefited from design state exploration studies performed by the first team. This particular aspect is highlighted in relation to the work already presented in the 10th Remote Engineering and Virtual Instrumentation (REV) conference.

Impact of different moodle course designs on students? Performance

This work describes the impact of different teachers’ approaches in using Moodle, for supporting their courses, at the Polytechnic of Porto - School of Engineering. The study covers five different courses, from different degrees and different years, and includes a number of Moodle resources especially supporting laboratory classes. These and other active resources are particularly analyzed in order to evaluate students’ adherence to them. One particular course includes a number of remote experiments, made available through VISIR (Virtual Instrument Systems in Reality) and directly accessible through links included in the Moodle course page. The collected data have been correlated with students’ classifications in the lab component and in the exam, each one weighting 50% of their final marks. This analysis benefited from the existence of different teachers’ approaches, which resulted in a diversity of Moodle-supported environments. Conclusions point to the existence of a positive correlation factor between the number of Moodle accesses and the final exam grade, although the quality of the resources made available by the teachers seems to be preponderant over its quantity. In addition, different students perspectives were found regarding active resources: while some seem to encourage students to participate (for instance online quiz or online reports), others, more demanding, are unable to stimulate the majority of them.

Lighting conditions and optical filters effects on visual performance of speleologists exposed to cave environments

The aim of this study is to evaluate lighting conditions and speleologists’ visual performance using optical filters when exposed to the lighting conditions of cave environments. A crosssectional study was conducted. Twenty-three speleologists were submitted to an evaluation of visual function in a clinical lab. An examination of visual acuity, contrast sensitivity, stereoacuity and flashlight illuminance levels was also performed in 16 of the 23 speleologists at two caves deprived of natural lightning. Two organic filters (450 nm and 550 nm) were used to compare visual function with and without filters. The mean age of the speleologists was 40.65 (± 10.93) years. We detected 26.1% participants with visual impairment of which refractive error (17.4%) was the major cause. In the cave environment the majority of the speleologists used a head flashlight with a mean illuminance of 451.0 ± 305.7 lux. Binocular visual acuity (BVA) was -0.05 ± 0.15 LogMAR (20/18). BVA for distance without filter was not statistically different from BVA with 550 nm or 450 nm filters (p = 0.093). Significant improved contrast sensitivity was observed with 450 nm filters for 6 cpd (p = 0.034) and 18 cpd (p = 0.026) spatial frequencies. There were no signs and symptoms of visual pathologies related to cave exposure. Illuminance levels were adequate to the majority of the activities performed. The enhancement in contrast sensitivity with filters could potentially improve tasks related with the activities performed in the cave.

Localization system for pedestrians based on sensor and information fusion

Nowadays there is an increase of location-aware mobile applications. However, these applications only retrieve location with a mobile device's GPS chip. This means that in indoor or in more dense environments these applications don't work properly. To provide location information everywhere a pedestrian Inertial Navigation System (INS) is typically used, but these systems can have a large estimation error since, in order to turn the system wearable, they use low-cost and low-power sensors. In this work a pedestrian INS is proposed, where force sensors were included to combine with the accelerometer data in order to have a better detection of the stance phase of the human gait cycle, which leads to improvements in location estimation. Besides sensor fusion an information fusion architecture is proposed, based on the information from GPS and several inertial units placed on the pedestrian body, that will be used to learn the pedestrian gait behavior to correct, in real-time, the inertial sensors errors, thus improving location estimation.

Assessment of the rapid test based on an immunochromatography technique for detecting anti-Treponema pallidum antibodies

A rapid test based on an immunochromatography assay - Determine™ Syphilis TP (Abbott Lab.) for detecting specific antibodies to Treponema pallidum was evaluated against serum samples from patients with clinical, epidemiological and serological diagnosis of syphilis, patients with sexually transmitted disease other than syphilis, and individuals with negative serology for syphilis. The Determine™ test presented the sensitivity of 93.6%, specificity of 92.5%, and positive predictive value and negative predictive value of 95.2% and 93.7%, respectively. One serum sample from patient with recent latent syphilis showed a prozone reaction. Determine™ is a rapid assay, highly specific and easy to perform. This technique obviates the need of equipment and its diagnostic features demonstrate that it may be applicable as an alternative assay for syphilis screening under some emergency conditions or for patients living in remote localities.

Plano estratégico “Empowering Lab ESEIG”

Os jovens ao longo do seu percurso escolar têm aspirações e expetativas elevadas quanto ao valor de empregabilidade dos diplomas a que tiveram acesso em todos os graus de ensino. Contudo, no recente contexto de crise económica, essas aspirações e expetativas socialmente nutridas pela escola e pela família têm sido em grande medida frustradas pelas crescentes dificuldades que os jovens portugueses de hoje têm vivido nos seus processos de inserção profissional. A nível individual, um jovem que passe um longo período inativo tem grandes probabilidades de sofrer de baixa autoestima, exclusão social ou de um “wage scar”, isto é, de no futuro ter um rendimento abaixo do rendimento médio de pessoas com formação e experiência equivalentes além de desenvolverem uma atitude passiva e falta de participação social, o que no longo prazo acaba por ter implicações negativas para a sociedade como um todo. Conscientes desta realidade e sabendo que as incubadoras de negócios podem transmitir confiança à comunidade financeira e apoiar as startups, promovendo uma cultura de empreendedorismo e agindo como um catalisador para o desenvolvimento de estruturas de suporte de negócios mais amplas, partimos para o estudo da incubação de negócios com o intuito de traçar um plano estratégico para a Escola Superior de Estudos Industriais e de Gestão (ESEIG) que permitisse desenvolver a cultura empreendedora da sua comunidade e por esta via dar o seu contributo para a resolução da crise económica que o país atravessa. Começamos por fazer um enquadramento teórico da incubação de negócios e rapidamente percebemos que, sendo a ESEIG uma instituição de ensino superior, era importante incluir no estudo os conceitos de empreendedorismo e inovação e perceber ao nível teórico como funciona a relação Universidade-Empresa. De seguida, fomos para o “terreno” e percebemos que a solução para este desafio passaria por capacitar os alunos da ESEIG com as competências empresariais e empreendedoras necessárias para o desenvolvimento de qualquer empreendimento autonomamente. Faltava agora perceber qual a melhor forma de concretizar este ambicioso objetivo. Após um pouco mais de estudo, percebemos que, a paixão está no centro de empreendedorismo juntamente com outras dimensões afetivas e emocionais e pode estimular a criatividade e o reconhecimento de novos padrões de informação fundamental para a descoberta e exploração de oportunidades promissoras. Por sua vez, a alegria local (escolas, cidades, regiões, países) está associada a uma maior atividade empreendedora, o humor e sentimentos positivos, bem como a satisfação de vida geram efeitos benéficos, como melhor desempenho nas tarefas e produtividade, evolução na carreira e sucesso pessoal e maior propensão para assumir riscos. Percebemos então que é necessário desenvolver uma cultura de positividade, pelo que, sugerimos a implementação do novo quadro conceptual PROSPER (Positivity; Relationships; Outcomes; Strengths; Purpose; Engagement; Resilience) que tem o potencial de ser usado como uma ferramenta organizacional para a implementação dos sete principais componentes de bem-estar. Cientes de que o objetivo final é aumentar a intenção empreendedora dos estudantes, bem como o número efetivo de empreendedores, definimos como objetivos, promover o valor do empreendedorismo na criação de oportunidades e no desenvolvimento das competências dos estudantes (Engaging), fornecer aos estudantes oportunidades de aprendizagem empresarial (Empowering) e apoiar os estudantes na criação e no desenvolvimento de negócios (Equipping). Neste sentido, sugerimos diversas ações que materializam estes objetivos. Para finalizar, utilizamos um Lean Canvas com o intuito de concretizar a nossa proposta estratégica para ESEIG, que culmina com a criação do Empowering Lab ESEIG.

Management consulting lab

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Management Consulting Lab: Project TAP

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Children consumer behaviour field lab: The Nestum consumer

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Product communication strategies: Emotional versus rational communication strategies and attitude change on children consumers

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Range of motion measurements based on depth camera for clinical rehabilitation

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica