A single-strand conformation polymorphism method by capillary electrophoresis with laser-induced fluorescence for detection of the T1151A mutation in hMLH1 gene

Mutation of hMLH1 gene plays an important role in human tumorigenesis. A highly sensitive single-strand conformation polymorphism (SSCP) method for detection of the T1151A mutation in exon 12 of the hMLH1 gene was for the first time developed employing laser-induced fluorescence capillary electrophoresis (LIF-CE). Effects of the concentration of linear polyacrylamide solution, running temperature, running voltage and the addition of glycerol on SSCP analysis were investigated, and the optimum separation conditions were defined. Thirty colorectal cancer patients and eight lung cancer patients were screened and the T1151A mutation was found in four of them. Based on CE-sequencing the mutation was further confirmed. To our knowledge, this is for the first time that the T1151A mutation is found in lung cancer. Our method is simple, rapid, and highly sensitive and is well suited to the analysis of large numbers of clinical samples.

Capillary electrophoretic analysis of arsenic species with indirect laser induced fluorescence detection

The development of a method for determining arsenic species by capillary zone electrophoresis (CZE) with indirect laser-induced fluorescence (LIF) is described in this paper. The buffer pH, the concentration of fluorescein, the nature and the concentration of the background electrolytes (BGEs) were defined. When 2.0 mM NaHCO3 (pH 9.28) with 10(-7) M fluorescein was used as the buffer, arsenite (As(lll), dimethylarsonic acid (DMA), monomethylarsonic acid (MMA), and arsenate (As(V)) were all separated from one another. The limits of detection for the four arsenic species were p p in the range of 0.12-0.54 mg/L. This method was used in the analysis of spiked arsenic species in tap and mineral water to demonstrate its usefulness. The results showed that both the recovery and the reproducibility of the developed method were acceptable.

缓释尿素中硝化抑制剂DMPP的气相色谱法测定

建立了一种检测缓释尿素中吡唑类硝化抑制剂DMPP的气相色谱法。DMPP在尿素水溶液中可定量转化为DMP,从5种有机溶剂中选择氯仿作为DMP的萃取剂,并采用加入KCl盐析的方法将萃取率从96.1%提高到99.5%。本文采用吡啶作为内标物,通过DB-1701气相色谱柱,氢火焰离子化检测器(FID)定量检测氯仿溶液萃取相中的DMP。萃取率为98.8%~100.4%;添加回收率为98.1%~99.5%;RSD为0.84%~1.6%。应用本法测定自制缓释尿素中DMPP质量分数为0.44%。

石灰性土壤供氮能力几种化学测定方法的评价研究

以采自于黄土高原差异较大的25个农田耕层石灰性土壤为供试土样,以淋洗和未淋洗土壤起始NO3--N小麦和玉米两季盆栽试验作物累积吸氮量为参比,对8种反映旱地土壤供氮能力的化学方法进行比较研究。结果表明,在一定程度上,可用有密切关系的土壤全氮或有机质,反映有机氮或全氮存在较大差异的土壤供氮能力,但其灵敏性较差。石灰性土壤矿质氮,特别是NO3--N与未淋洗土壤起始NO3--N作物吸氮量之间有较高相关性(r=0.884,P<0.01),而与淋洗土壤起始NO3--N作物吸氮量间相关系数仅为0.472(P<0.05),说明矿质氮可反映土壤当前供氮水平,而不能反映土壤潜在供氮能力;石灰性土壤起始NO3--N对各化学方法与作物吸氮量之间相关性影响较大。酸性高锰酸钾法既可反映土壤潜在供氮能力,也可反映土壤总供氮能力;酸性高锰酸钾法的修订方法,即硫酸—高锰酸钾法提取出的NH4+-N值接近于KCl水浴法提取出的NH4+-N值,该方法在反映土壤总供氮能力方面与酸性高锰酸钾法相当,但在反映土壤潜在供氮能力方面不及酸性高锰酸钾法优越。KCl水浴法在评价石灰性土壤供氮能力方面,与酸性高锰酸钾法的效果基本相同;沸水浸取法和NaHCO3-UV...

模拟酸雨对果园土壤主要形态酸变化的影响研究

采用室内淋溶的方法研究了模拟酸雨对果园土壤pH(H2O)、pH(KCl)、交换性酸(EA)、交换性铝(EAl)、可滴定酸度(BNC)等各形态酸的变化影响,并依据淋溶前后各形态酸的含量评价了土壤酸度的变化。试验结果表明:以土壤pH(H2O)值作为供试土壤酸化指标,pH≤4.5的模拟酸雨淋溶促进了土壤酸化,而pH≥5.5的酸雨淋溶缓冲了土壤的酸化;以土壤pH(KCl)值、交换性酸(EA)、交换性铝(EAl)或可滴定酸度(BNC)作为土壤酸化的指标,pH2.5的酸雨淋溶促进了土壤酸化,而pH≥3.5的淋溶处理缓冲了土壤的酸化,土壤酸度减弱。

Sensitive, Label-Free Protein Assay Using 1-ethyl-3-methylimidazolium Tetrafluoroborate Supported Microchip Electrophoresis with Laser-Induced Fluorescence Detection

Based on the dimer-monomer equilibrium movement of the fluorescent dye Pyronin Y (PY), a rapid, simple, highly sensitive, label-free method for protein detection was developed by microchip electrophoresis with LIF detection. PY formed a nonfluorescent dimer induced by the premicellar aggregation of an anionic surfactant, SDS, however, the fluorescence intensity of the system increased dramatically when proteins such as BSA, bovine hemoglobin, cytochrome c, and trypsin were added to the solution due to the transition of dimer to fluorescent monomer. Furthermore, 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF(4)) instead of PBS was applied as running buffers in microchip electrophoresis.

Large current gain and low operational voltage permeable metal-base organic transistors based on Au/Al double layer metal base

In order to realize the common-emitter characteristics of the tris(8-hydroxyquinoline) aluminium (Alq(3))-based organic transistors, we used Au/Al double metal layer as the base, thus the vertical metal-base transistors with structure of Al/n-Si/Au/Al/Alq(3)/LiF/Al were constructed. It was found that the contact properties between the base and the organic semiconductors play an important role in the device performance. The utilization of Au/Al double layer metal base allows the devices to operate at high gain in the common-emitter and common-base mode at low operational voltage.

High gain in hybrid transistors with BAlq(3)/Alq(3) isotype heterostructure emitter

We report the fabrication of permeable metal-base transistors based on bis(2-methyl-8-quinolinolato-N1,O8)-(1,1'-biphenyl-4-olato) aluminum (BAlq(3))/tri(8-hydroxyquinoline) aluminum (Alq(3)) isotype heterostructure as emitter layer. In this transistor, n-Si was used as the collector, LiF/Al as the emitter electrode, and Au/Al bilayer metal as the base. We show that the leakage current is greatly reduced in Al/n-Si/Au/Al/BAlq(3)/Alq(3)/LiF/Al devices with respect to Al/n-Si/Au/Al/Alq(3)/LiF/Al devices due to the utilization of BAlq(3)/Alq(3) isotype heterostructure emitter, leading to high common-base and common-emitter current gains at low driving voltages.

Efficient white organic light-emitting diodes using europium complex as the red unit

Efficient white organic light-emitting diodes (WOLEDs) using europium complex as the red unit are presented. The WOLEDs were fabricated by using the structure of indium tin oxide (ITO)/N, N'-di(naphthalene-1-yl)-N, N'-diphenyl-benzidine (NPB)/4,4-N, N-dicarbazolebiphenyl (CBP) : bis(2,4-diphenylquinolyl-N, C-2) iridium (acetylacetonate) ((PPQ)(2)Ir(acac)) : Eu (III) tris(thenoyltrifluoroacetone) 3,4,7,8-tetramethyl-1,10-phenanthroline (Eu(TTA)(3)(Tmphen))/NPB/2-methyl-9,10-di(2-naphthyl)anthracene (MADN) : p-bis (p-N, N-di-phenyl-aminostyryl)benzene (DSA-Ph)/9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP)/tris(8-hydroxyquinoline) aluminium (Alq3)/LiF/Al.

Al/WO3/Au as the interconnecting layer for efficient tandem white organic light-emitting diodes

White light emission from tandem organic light-emitting diodes consisting of blue and red light units separated by a transparent interconnecting layer of Al/WO3/Au has been realized. The devices have a structure of indium-tin-oxide (ITO)/molybdenum oxide (MoO3) (8 nm)/N, N'-di(naphthalene-1-yl)-N, N'-diphenyl-benzidine (NPB)(100 nm)/p-bis(p-N, N-diphenyl-aminostyryl) benzene) (DSA-ph): 2-methyl-9,10-di(2-naphthyl) anthracene (MADN)(40 nm)/tris(8-hydroxylquinoline) aluminium (Alq(3)) (10 nm)/LiF(1 nm)/Al(2 nm)/WO3(3 nm)/Au(16 nm)/MoO3(5 nm)/NPB(60 nm)/Alq(3): 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB)(30 nm)/Alq3(30 nm)/LiF(1 nm)/Al(150 nm).

Effects of thermal annealing on polymer photovoltaic cells with buffer layers and in situ formation of interfacial layer for enhancing power conversion efficiency

We have investigated the effects of thermal annealing before and after cathode deposition on poly(3-hexylthiophene)(P3HT)/[6,6]-phenyl C61-butyric acid methyl ester (PCBM) blend photovoltaic cells with different cathode buffer layers. The introduction of cathode buffer layer such as lithium fluoride (LiF) and calcium oxide (CaO) in pre-annealing cells can increase the open-circuit voltage (V-oc) and the power conversion efficiency (PCE). Post thermal annealing after cathode deposition further enhanced the PCE of the cells with LiF/Al cathode.

C-60 trianion-mediated electrocatalysis and amperometric sensing of hydrogen peroxide

Heterogeneous electrocatalytic reduction of hydrogen peroxide (H2O2) by C-60 is reported for the first time. C-60 is embedded in tetra octyl ammonium bromide (TOAB) film and is characterized by scanning electron microscopy and cyclic voltammetry. Electrocatalytic studies show that the trianion of C-60 mediates the electrocatalytic reduction of H2O2 in aqueous solution containing 0.1 M KCl. Application of such film modified electrode as an amperometric sensor for H2O2 determination is also examined.

F-肌动蛋白与负电荷磷脂膜的相互作用研究

细胞膜的内膜含有大量的负电荷磷脂,研究F2肌动蛋白与负电荷磷脂的相互作用将有助于更深入 地了解细胞骨架与细胞膜的体内相互作用机制。在金片和金电极上分别构建了负电荷磷脂的杂化双层磷脂 膜,通过表面等离子体共振方法( SPR)和电化学阻抗技术研究了F2肌动蛋白与负电荷磷脂膜的相互作用。结 果表明, F2肌动蛋白可以在没有中间联系蛋白的情况下,直接与负电荷磷脂膜发生相互作用。钙离子可以有 效地促进它们的相互作用,表明钙离子在其中发挥了重要作用。高浓度的KCl显著抑制它们的相互作用,表 明这种相互作用主要受静电作用影响。实验结果进一步证明在F2肌动蛋白与负电荷磷脂膜相互作用时,除 了可以通过其它蛋白发生间接相互作用外,还可以与磷脂膜发生直接的相互作用。

Crystalline organic superlattice

Highly crystalline organic superlattice has great potential for providing innovative function in organic devices. With studies of the structure and fundamental electronical properties, we have demonstrated the phathalocynine organic superlattice, which is a structure composed of periodically alternating crystalline layers of H2Pc and F16CuPc. A periodical crystal structure and electronic structure appear in this organic superlattice system. High density of mobile electrons and holes distribute periodically in F16CuPc and H2Pc layers, respectively, leading to a significant change in intrinsic properties of organic semiconductors.

Electrolytic Deposition and Diffusion of Lithium onto Magnesium-9 Wt Pct Yttrium Bulk Alloy in Low-Temperature Molten Salt of Lithium Chloride and Potassium Chloride

The electrolytic deposition and diffusion of lithium onto bulk magnesium-9 wt pct yttrium alloy cathode in molten salt of 47 wt pct lithium chloride and 53 wt pct potassium chloride at 693 K were investigated. Results show that magnesium-yttrium-lithium ternary alloys are formed on the surface of the cathodes, and a penetration depth of 642 mu m is acquired after 2 hours of electrolysis at the cathodic current density of 0.06 A center dot cm(-2). The diffusion of lithium results in a great amount of precipitates in the lithium containing layer. These precipitates are the compound of Mg41Y5, which arrange along the grain boundaries and hinder the diffusion of lithium, and solid solution of yttrium in magnesium. The grain boundaries and the twins of the magnesium-9 wt pct yttrium substrate also have negative effects on the diffusion of lithium.