Experimental study on polyester based concretes filled with glass fibre reinforced plastic recyclates – a contribution to composite materials sustainability

The development and applications of thermoset polymeric composites, namely fibre reinforced plastics (FRP), have shifted in the last decades more and more into the mass market [1]. Despite of all advantages associated to FRP based products, the increasing production and consume also lead to an increasing amount of FRP wastes, either end-of-lifecycle products, or scrap and by-products generated by the manufacturing process itself. Whereas thermoplastic FRPs can be easily recycled, by remelting and remoulding, recyclability of thermosetting FRPs constitutes a more difficult task due to cross-linked nature of resin matrix. To date, most of the thermoset based FRP waste is being incinerated or landfilled, leading to negative environmental impacts and supplementary added costs to FRP producers and suppliers. This actual framework is putting increasing pressure on the industry to address the options available for FRP waste management, being an important driver for applied research undertaken cost efficient recycling methods. [1-2]. In spite of this, research on recycling solutions for thermoset composites is still at an elementary stage. Thermal and/or chemical recycling processes, with partial fibre recovering, have been investigated mostly for carbon fibre reinforced plastics (CFRP) due to inherent value of carbon fibre reinforcement; whereas for glass fibre reinforced plastics (GFRP), mechanical recycling, by means of milling and grinding processes, has been considered a more viable recycling method [1-2]. Though, at the moment, few solutions in the reuse of mechanically-recycled GFRP composites into valueadded products are being explored. Aiming filling this gap, in this study, a new waste management solution for thermoset GFRP based products was assessed. The mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the potential added value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. The use of a cementless concrete as host material for GFRP recyclates, instead of a conventional Portland cement based concrete, presents an important asset in avoiding the eventual incompatibility problems arisen from alkalis silica reaction between glass fibres and cementious binder matrix. Additionally, due to hermetic nature of resin binder, polymer based concretes present greater ability for incorporating recycled waste products [3]. Under this scope, different GFRP waste admixed polymer mortar (PM) formulations were analyzed varying the size grading and content of GFRP powder and fibre mix waste. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacities of modified mortars with regard to waste-free polymer mortars.

Reforço de estruturas de betão armado com compósitos de fibra de carbono

O relatório resulta do estágio realizado na empresa Sika Brasil, no âmbito da Unidade Curricular de DIPRE do Mestrado de Engenharia Civil do Instituto Superior de Engenharia do Porto. A área de especialidade incidiu na recuperação e reforço de estruturas (Target Market Refurbishment), onde se deu a oportunidade de aprofundar conhecimentos em reforço estrutural através do sistema de reforço com compósitos de fibra de carbono (CFRP) colado exteriormente (EBR - Externally Bonded Reinforcement). O estágio realizado permitiu uma abordagem com a gama de produtos de recuperação e reforço da Sika Brasil, sendo que houve um foco muito grande nos produtos que respeitam ao reforço estrutural com compósitos de fibra de carbono. Este documento visa várias etapas do estágio, relacionadas diretamente com o reforço estrutural com CFRP. Foi feito um levantamento teórico das características dos compósitos de fibra de carbono, dando a conhecer os materiais envolvidos no sistema, as suas propriedades mecânicas e o seu âmbito de aplicação. No sentido de ter um diálogo profícuo com os projetistas e aplicadores de sistemas compósitos de fibra, foi realizada uma análise do procedimento de cálculo para o dimensionamento de reforço CFRP, à luz do Bulletin 14 fib:01 (2001), bem como uma análise da situação de incêndio para os sistemas compósitos. Consta neste documento uma análise feita entre os principais fornecedores de sistemas de CFRP no Brasil, baseando-se a mesma no conteúdo das fichas técnicas de produto relativas ao sistema de reforço EBR e respetiva comparação com a informação necessária para dimensionamento, de acordo com o Bulletin 14 fib:01 (2001). É relatado um reforço estrutural, como caso de estudo, tendo-se dado a oportunidade de se acompanhar desde a sua fase de projeto até à fase de execução. Por fim, este documento contém a simulação de dois programas da Sika para dimensionamento de reforço CFRP. A simulação foi feita para uma viga submetida a esforço de flexão, com as características geométricas e solicitações previamente definidas.

A crisis of social democracy : organized labour and the NDP in an era of neoliberalism

The NDP was founded out of the ashes of the Co-Operative Commonwealth Federation to cooperate with the Canadian Labour Congress to become the 'political arm of organized labour' in Canada. The NDP has long claimed they are the party which represents the policy goals of organized labour in Canada: that the NDP alone will fight for trade union rights, and will fight for Canadian workers. Divergent Paths is an examination of the links between the labour movement and the ND P in an era ofneo-liberalism. Provincial NDP governments have become increasingly neoliberal in their ideological orientation, and have often proved to be no friend to the labour movement when they hold office. The Federal party has never held power, nor have they ever formed the Official Opposition. This thesis charts the progress of the federal NDP as they become more neoliberal from 1988 to 2006, and shows how this trend effects the links between the NDP and labour. Divergent Paths studies each federal election from 1988 to 2006, looking at the interactions between Labour and the NDP during these elections. Elections provide critical junctions to study discourse - party platforms, speeches, and other official documents can be used to examine discourse. Extensive newspaper searches were used to follow campaign events and policy speeches. Studying the party's discourse can be used to determine the ideological orientation of the party itself: the fact that the party's discourse has become neoliberal is a sure sign that the party itself is neoliberal. The NDP continues to drive towards the centre of the political spectrum in an attempt to gain multi-class support. The NDP seems more interested in gaining seats at any cost, rather then promoting the agenda of Labour. As the party attempts to open up to more multi-class support, Labour becomes increasingly marginalised in the party. A rift which arguably started well before the 1988 election was exacerbated during that election; labour encouraged the NDP to campaign solely on the issue of Free Trade, and the NDP did not. The 1993 election saw the rift between the two grow even further as the Federal NDP suffered major blowbacks from the actions of the Ontario NDP. The 1997 and 2000 elections saw the NDP make a deliberate move to the centre of the political spectrum which increasingly marginalised labour. In the 2004 election, Jack Layton made no attempt to move the party back to the left; and in 2006 the link between labour and the NDP was perhaps irreparably damaged when the CAW endorsed the Liberal party in a strategic voting strategy, and the CLC did not endorse the NDP. The NDP is no longer a reliable ally of organized labour. The Canadian labour movement must decide wether the NDP can be 'salvaged' or if the labour movement should end their alliance with the NDP and engage in a new political project.

Caractérisation clinique et génétique des myotonies congénitales classiques et atypiques au Saguenay Lac St-Jean

Les syndromes myotoniques congénitaux atypiques dus à des mutations du canal sodé voltage-dépendant Nav1.4 se distinguent des myotonies congénitales classiques (canal chlore ClC-1) par la présence de traits atypiques incluant des myotonies douloureuses aggravées au froid et à l’ingestion de potassium. La caractérisation clinique et moléculaire de plusieurs familles atteintes de ces conditions rares dans la région du Saguenay-Lac-St-Jean nous a permis de découvrir une nouvelle mutation SCN4A à effet fondateur causant un phénotype de myotonies douloureuses aggravées au froid, parfois accompagné de phénomènes dystrophiques ou paralytiques. L’ampleur de notre cohorte nous permet de commenter sur l’hétérogénité phénotypique observée, sur les traits caractéristiques des syndromes associés au gène SCN4A, sur les implications physiologiques probables d’une telle mutation ainsi que sur les facteurs modulant le phénotype observé. Enfin, notre étude nous permet de souligner l’importance du dépistage familial systématique afin de prévenir les complications anesthésiques potentielles associées à ces conditions.

Verbesserung der seismischen Kapazität von Mauerwerkswänden durch Verwendung von Elastomerlagern

Ein großer Teil der Schäden wie auch der Verluste an Gesundheit und Leben im Erdbebenfall hat mit dem frühzeitigen Versagen von Mauerwerksbauten zu tun. Unbewehrtes Mauerwerk, wie es in vielen Ländern üblich ist, weist naturgemäß einen begrenzten Erdbebenwiderstand auf, da Zugspannungen und Zugkräfte nicht wie bei Stahlbeton- oder Stahlbauten aufgenommen werden können. Aus diesem Grund wurde bereits mit verschiedenen Methoden versucht, die Tragfähigkeit von Mauerwerk im Erdbebenfall zu verbessern. Modernes Mauerwerk kann auch als bewehrtes oder eingefasstes Mauerwerk hergestellt werden. Bei bewehrtem Mauerwerk kann durch die Bewehrung der Widerstand bei Beanspruchung als Scheibe wie als Platte verbessert werden, während durch Einfassung mit Stahlbetonelementen in erster Linie die Scheibentragfähigkeit sowie die Verbindung zu angrenzenden Bauteilen verbessert wird. Eine andere interessante Möglichkeit ist das Aufbringen textiler Mauerwerksverstärkungen oder von hochfesten Lamellen. In dieser Arbeit wird ein ganz anderer Weg beschritten, indem weiche Fugen Spannungsspitzen reduzieren sowie eine höhere Verformbarkeit gewährleiten. Dies ist im Erdbebenfall sehr hilfreich, da die Widerstandfähigkeit eines Bauwerks oder Bauteils letztlich von der Energieaufnahmefähigkeit, also dem Produkt aus Tragfähigkeit und Verformbarkeit bestimmt wird. Wenn also gleichzeitig durch die weichen Fugen keine Schwächung oder sogar eine Tragfähigkeitserhöhung stattfindet, kann der Erdbebenwiderstand gesteigert werden. Im Kern der Dissertation steht die Entwicklung der Baukonstruktion einer Mauerwerkstruktur mit einer neuartigen Ausbildung der Mauerwerksfugen, nämlich Elastomerlager und Epoxydharzkleber anstatt üblichem Dünnbettmörtel. Das Elastomerlager wird zwischen die Steinschichten einer Mauerwerkswand eingefügt und damit verklebt. Die Auswirkung dieses Ansatzes auf das Verhalten der Mauerwerkstruktur wird unter dynamischer und quasi-statischer Last numerisch und experimentell untersucht und dargestellt.

Diseño de un modelo de intervención del suicidio en niños y adolescentes

Resumen El objetivo de este estudio fue el de diseñar un modelo de intervención para la prevención del suicidio en la población escolar de niños y adolescentes, con 72 participantes de un colegio público y un colegio privado de la ciudad de Bogotá. Se caracterizó el suicidio en la ciudad de Bogotá en los últimos nueve años, los aspectos legales, se analizaron algunos modelos de prevención, se identificaron los principales factores de riesgo y factores protectores y se propusieron estrategias para su prevención. Este modelo está basado en la administración social del riesgo y los factores protectores y de riesgo, susceptibles de modificación. Se realizó una prueba de tamizaje y fueron utilizados: el Inventario de depresión infantil (CDI de Kovacs), la escala de desesperanza de Beck y la escala de ansiedad para niños y adolescentes de Spence, validadas a nivel internacional. Se observó una correlación positiva (0.490) mediante el coeficiente de rangos de Spearman, con una significación de 0,01 (bilateral) para los tres factores de riesgo. Se hace entrega de un manual de instrucción para la intervención temprana del suicidio en esta población y un folleto informativo dirigido a padres de familia sobre los factores de riesgo y factores protectores. A partir de esto se plantean implicaciones futuras.

Condiciones para preservar e valor moral del consentimiento informado en medicina

El consentimiento informado (CI) en medicina corre el riesgo de quedar reducido a un formalismo legal sin valor moral; esto puede suceder por dos cosas: 1) como consecuencia de que el paciente no comprenda con suficiencia el concepto de autonomía y 2) debido a la disminución de la autonomía práctica del paciente por efecto de la autoridad del personal médico o de las instituciones de salud. Este artículo tiene como fin mostrar bajo qué condiciones se puede evitar la reducción del CI a un formalismo legal desprovisto de valor moral. Para servir a este propósito, se considera el concepto de autonomía relacional como eje articulador que pone en relación al paciente con su comunidad moral y con el médico, lo que impulsa al personal de la salud a proporcionar las condiciones para tal fin. Así, se afirma que la valía moral del CI puede conservarse, primero, a partir de una concepción relacional de la autonomía y, segundo, mediante la aplicación, por parte del médico y de la institución, de un protocolo que disminuya la posibilidad de choque entre la autonomía y la autoridad.

Analysis and Simulation of Transverse Random Fracture of Long Fibre Reinforced Composites

La present tesi proposa una metodología per a la simulació probabilística de la fallada de la matriu en materials compòsits reforçats amb fibres de carboni, basant-se en l'anàlisi de la distribució aleatòria de les fibres. En els primers capítols es revisa l'estat de l'art sobre modelització matemàtica de materials aleatoris, càlcul de propietats efectives i criteris de fallada transversal en materials compòsits. El primer pas en la metodologia proposada és la definició de la determinació del tamany mínim d'un Element de Volum Representatiu Estadístic (SRVE) . Aquesta determinació es du a terme analitzant el volum de fibra, les propietats elàstiques efectives, la condició de Hill, els estadístics de les components de tensió i defromació, la funció de densitat de probabilitat i les funcions estadístiques de distància entre fibres de models d'elements de la microestructura, de diferent tamany. Un cop s'ha determinat aquest tamany mínim, es comparen un model periòdic i un model aleatori, per constatar la magnitud de les diferències que s'hi observen. Es defineix, també, una metodologia per a l'anàlisi estadístic de la distribució de la fibra en el compòsit, a partir d'imatges digitals de la secció transversal. Aquest anàlisi s'aplica a quatre materials diferents. Finalment, es proposa un mètode computacional de dues escales per a simular la fallada transversal de làmines unidireccionals, que permet obtenir funcions de densitat de probabilitat per a les variables mecàniques. Es descriuen algunes aplicacions i possibilitats d'aquest mètode i es comparen els resultats obtinguts de la simulació amb valors experimentals.

Quantitative pulsed phase thermography applied to steel plates

Pulsed Phase Thermography (PPT) has been proven effective on depth retrieval of flat-bottomed holes in different materials such as plastics and aluminum. In PPT, amplitude and phase delay signatures are available following data acquisition (carried out in a similar way as in classical Pulsed Thermography), by applying a transformation algorithm such as the Fourier Transform (FT) on thermal profiles. The authors have recently presented an extended review on PPT theory, including a new inversion technique for depth retrieval by correlating the depth with the blind frequency fb (frequency at which a defect produce enough phase contrast to be detected). An automatic defect depth retrieval algorithm had also been proposed, evidencing PPT capabilities as a practical inversion technique. In addition, the use of normalized parameters to account for defect size variation as well as depth retrieval from complex shape composites (GFRP and CFRP) are currently under investigation. In this paper, steel plates containing flat-bottomed holes at different depths (from 1 to 4.5 mm) are tested by quantitative PPT. Least squares regression results show excellent agreement between depth and the inverse square root blind frequency, which can be used for depth inversion. Experimental results on steel plates with simulated corrosion are presented as well. It is worth noting that results are improved by performing PPT on reconstructed (synthetic) rather than on raw thermal data.

Syntheses, crystal structure and theoretical investigation of novel heteroleptic complexes of nickel(II) with N-R-sulfonyldithiocarbimate and phosphine ligands

Five new complexes of general formula: [Ni(RSO(2)N=CS(2))(dppe)], where R = C(6)H(5) (1), 4-ClC(6)H(4) (2), 4-BrC(6)H(4) (3), 4-IC(6)H(4) (4) and dppe = 1,2-bis(diphenylphosphino) ethane and [Ni(4-IC(6)H(4)SO(2)N=CS(2))(PPh(3))(2)] (5), where PPh3 = triphenylphosphine, were obtained in crystalline form by the reaction of the appropriate potassium N-R-sulfonyldithiocarbimate K(2)(RSO(2)N=CS(2)) and dppe or PPh(3) with nickel(II) chloride in ethanol/water. The elemental analyses and the IR, (1)H NMR, (13)C NMR and (31)P NMR spectra are consistent with the formation of the square planar nickel(II) complexes with mixed ligands. All complexes were also characterized by X-ray diffraction techniques and present a distorted cis-NiS(2)P(2) square-planar configuration around the Ni atom. Quantum chemical calculations reproduced the crystallographic structures and are in accord with the spectroscopic data. Rare C-H center dot center dot center dot Ni intramolecular short contact interactions were observed in the complexes 1-5. (C) 2011 Elsevier B. V. All rights reserved.

Estudo da estampabilidade de tailored blanks soldadas a laser

A união de chapas de diferentes materiais, espessuras e propriedades mecânicas formando uma geratriz para estampagem é uma estratégia que a indústria automobilística utiliza no desenvolvimento de estruturas leves. Uma delas chama-se Tailored Welded Blanks, onde duas ou mais chapas são unidas pelo processo de solda. Dentro do contexto de estruturas leves é analisado neste trabalho o comportamento mecânico de duas diferentes chapas soldadas utilizadas pela indústria automobilística, formando uma única geratriz com diferentes razões de espessuras. Para isso, foram unidos os materiais ZSTE 220 P nas espessuras 1.5 e 0.8 mm e St 05 nas espessuras de 1.5 e 1.2 mm. O processo de junção utilizado para unir os materiais de diferentes espessuras foi solda a laser. Os ensaios de fabricação utilizados para caracterizar o comportamento mecânico do material foram o ensaio de tração uniaxial e o ensaio Nakajima modificado. O ensaio de tração define as propriedades mecânicas e o ensaio Nakajima quantifica as deformações principais maiores e menores na superfície da chapa. De posse destas deformações é possível construir as Curvas Limites de Conformação (CLC) de cada material. A maneira encontrada para simular estes estados de deformações foi utilizar 8 corpos de prova de mesmo comprimento, porém variando sua largura e o raio do entalhe correspondente. O uso de corpos de prova com diferentes larguras e raio de entalhe permite obter deformações que abrangem os campos referentes ao estiramento, deformação plana e embutimento profundo.

Solução semi-analítica da equação de Langevin assintótica para o deslocamento aleatório pelo método Picard

Neste trabalho é desenvolvida uma solução semi-analítica para a Equação de Langevin assintótica (Equação de Deslocamento Aleatório) aplicada à dispersão de poluentes na Camada Limite Convectiva (CLC). A solução tem como ponto de partida uma equação diferencial de primeira ordem para o deslocamento aleatório, sobre a qual é aplicado o Método Iterativo de Picard. O novo modelo é parametrizado por um coeficiente de difusão obtido a partir da Teoria de Difusão Estatística de Taylor e de um modelo para o espectro de turbulência, assumindo a supersposição linear dos efeitos de turbulência térmica e mecânica. A avaliação do modelo é realizada através da comparação com dados de concentração medidos durante o experimento de dispersão de Copenhagen e com resultados obtidos por outros quatro modelos: modelo de partículas estocástico para velocidade aleatória (Modelo de Langevin), solução analítica da equação difusão-advecção, solução numérica da equação difusão-advecção e modelo Gaussiano. Uma análise estatística revela que o modelo proposto simula satisfatoriamente os valores de concentração observados e apresenta boa concordância com os resultados dos outros modelos de dispersão. Além disso, a solução através do Método Iterativo de Picard pode apresentar algumas vantagem em relação ao método clássico de solução.

Desenvolvimento do processo de construção de curvas limite de conformação

Este trabalho analisa o processo de obtenção da Curva Limite de Conformação (CLC) através do procedimento adotado por Nakazima, 1968. Ele variando o formato dos corpos de prova submeteu os mesmos a um ensaio de estiramento simulando uma ampla faixa de deformações que vão desde o embutimento profundo passando pela deformação de tração simples até a deformação biaxial de tração. Foram feitos ensaios com corpos de prova em formato de tiras, exatamente como Nakazima propôs. A ruptura para estes corpos de prova ocorre de modo aleatório rompendo inclusive na região de contado da matriz com o mesmo. Fez-se ensaios com corpos de prova com tiras entalhadas. Esse entalhe tem a função de promover a estricção ou ruptura dependendo do ponto de parada do ensaio, na região de contato entre punção e corpo de prova ensaiado. No presente trabalho utiliza-se o mesmo método de Nakazima variando o formato do punção, em vez de um domo ou ponta hemisférica optou-se pela ponta eliptica. Foi analisada a influencia na CLC obtida, uma vez que a forma elíptica proporciona uma área de contato inicial maior gerando menores solicitações mecânicas no inicio do ensaio resultando numa CLC mais para cima quando comparada com uma CLC gerada com punção hemisférico. Para esta análise utilizou-se como matéria prima o alumínio comercialmente puro liga AA1050-O.

Optimal two-sided tests for instrumental variables regression with heteroskedastic and autocorrelated errors

This paper considers two-sided tests for the parameter of an endogenous variable in an instrumental variable (IV) model with heteroskedastic and autocorrelated errors. We develop the nite-sample theory of weighted-average power (WAP) tests with normal errors and a known long-run variance. We introduce two weights which are invariant to orthogonal transformations of the instruments; e.g., changing the order in which the instruments appear. While tests using the MM1 weight can be severely biased, optimal tests based on the MM2 weight are naturally two-sided when errors are homoskedastic. We propose two boundary conditions that yield two-sided tests whether errors are homoskedastic or not. The locally unbiased (LU) condition is related to the power around the null hypothesis and is a weaker requirement than unbiasedness. The strongly unbiased (SU) condition is more restrictive than LU, but the associated WAP tests are easier to implement. Several tests are SU in nite samples or asymptotically, including tests robust to weak IV (such as the Anderson-Rubin, score, conditional quasi-likelihood ratio, and I. Andrews' (2015) PI-CLC tests) and two-sided tests which are optimal when the sample size is large and instruments are strong. We refer to the WAP-SU tests based on our weights as MM1-SU and MM2-SU tests. Dropping the restrictive assumptions of normality and known variance, the theory is shown to remain valid at the cost of asymptotic approximations. The MM2-SU test is optimal under the strong IV asymptotics, and outperforms other existing tests under the weak IV asymptotics.

Resposta térmica de um compósito PEEK+PTFE+Fibra de carbono+grafite

Composites based on PEEK + PTFE + CARBON FIBER + Graphite (G_CFRP) has increased application in the top industries, as Aerospace, Aeronautical, Petroleum, Biomedical, Mechanical and Electronics Engineering challenges. A commercially available G_CFRP was warmed up to three different levels of thermal energy to identify the main damage mechanisms and some evidences for their intrinsic transitions. An experimental test rig for systematize a heat flux was developed in this dissertation, based on the Joule Effect. It was built using an isothermal container, an internal heat source and a real-time measurement system for test a sample by time. A standard conical-cylindrical tip was inserted into a soldering iron, commercially available and identified by three different levels of nominal electrical power, 40W (manufacturer A), 40W (manufacturer B), 100W and 150W, selected after screening tests: these power levels for the heat source, after one hour of heating and one hour of cooling in situ, carried out three different zones of degradation in the composite surface. The bench was instrumented with twelve thermocouples, a wattmeter and a video camera. The twelve specimens tested suffered different degradation mechanisms, analyzed by DSC (Differential Scanning Calorimetry) and TG (Thermogravimetry) techniques, Scanning Electron Microscopy (SEM) and Energy-Dispersive X-Rays (EDX) Analysis. Before and after each testing, it was measured the hardness of the sample by HRM (Hardness Rockwell M). Excellent correlations (R2=1) were obtained in the plots of the evaporated area after one hour of heating and one hour of cooling in situ versus (1) the respective power of heat source and (2) the central temperature of the sample. However, as resulting of the differential degradation of G_CFRP and their anisotropy, confirmed by their variable thermal properties, viscoelastic and plastic properties, there were both linear and non-linear behaviour between the temperature field and Rockwell M hardness measured in the radial and circumferential directions of the samples. Some morphological features of the damaged zones are presented and discussed, as, for example, the crazing and skeletonization mechanism of G_CFRP