Compact asymmetric coplanar strip-fed antenna for wideband applications

An asymmetric coplanar strip-fed uniplanar antenna for wideband applications is presented. The resulting antenna offers a 2:1 VSWR bandwidth greater than 100% from 1.58 to 5.48 GHz covering the DCS/PCS/IEEE 802.11a/WiMAX bands. The antenna has an overall dimension of 44 × 35 mm2 when printed on a substrate of dielectric constant 4.4 and height 1.6 mm. The design equation is also presented in this article. The antenna exhibits good radiation characteristics and moderate gain in the entire operating band.

Design of a Compact Multiband Microstrip Antenna

A compact microstrip multiband antenna on a modified ground plane which can operate over the bands starting from 900 MHz to 5.35 GHz which includes the GSM (880-960) GPS (1568-1592 MHz), DCS (1710-1880 MHz), and PCS (1850- 1990 MHz). UMTS (1920-2170 MHz), IEEE 802.11 b/g (2400- 2484) and WLAN IEEE 802.11a band (5.15-5.35) is reported in this paper. The overall dimension of the antenna is 33 x 33 mm2 including the top patch with a dimension 22 x 22 mm2. The experimental results of the antenna are presented in this paper. The results confirm that the antenna exhibits wide band characteristics and covers 7 bands of operation

Desarrollo del lenguaje en una educación intercultural : nivel 4-6 años.

Estos materiales se enmarcan en un proyecto más amplio de Educación Intercultural y Atención a la Diversidad que se viene desarrollando en las aulas de educación infantil del Colegio Público Mediterraneo (Melilla)

Chemical, physical and electrical properties of aged dodecylbenzene 3: thermal ageing of mixed isomers in nitrogen and under sealed conditions

Commercial dodecylbenzene cable fluid was aged at temperatures of 105 and 135 degrees C in dry oxygen-free nitrogen. In addition, selected samples were aged at 135 degrees C under sealed conditions where air was excluded from the headspace above the oil. A variety of analytical techniques, such as ultra-violet visible and infra-red spectroscopy, acid number and water content measurements, were then used to characterize the aged oils. In addition, their electrical properties were assessed by dielectric spectroscopy. Compared with ageing in air, the ageing rate was reduced significantly and, as expected, no major oxidation peaks were detected in the infrared spectrometer. Significantly, very little absorbance at 680 nm ("red absorbers") was detected in samples aged with copper and, consequentially, no large increases in dielectric loss were recorded within the ageing times considered here. This study compliments previous investigations on cable fluid and 1-phenyldodecane aged in air and show that the same ageing indicators are valid in oils aged under conditions which more closely resemble those found in high voltage plant.

Offering 802.11 MAC frame transport over multiband OFDM for consumer devices

A method to map all the variants of the IEEE 802.11 MAC frames into the Multiband OFDM based ECMA-368 Physical standard is proposed, without contravening the standard. The transportation of IEEE 802.11 MAC frames over ECMA-368 allows for the migration current of Wireless LAN applications towards a Wireless Personal Area Network (WPAN) solution. This system benefits the Consumer Electronics Market as the high data-rate WPAN is capable of transporting broadcast-quality video while the same system can also transport existing applications available today, maintaining existing effort, products and backward-compatibility(1).

Quality time [QoS in 802.11e]

Wireless local area networks (WLANs) based on the IEEE 802.11 standard are now widespread. Most are used to provide access for mobile devices to a conventional wired infrastructure, and some are used where wires are not possible, forming an ad hoc network of their own. There are several varieties at the physical or radio layer (802.11, 802.11a, 802.11b, 802.11g), with each featuring different data rates, modulation schemes and transmission frequencies. However, all of them share a common medium access control (MAC) layer. As this is largely based on a contention approach, it does not allow prioritising of traffic or stations, so it cannot easily provide the quality of service (QoS) required by time-sensitive applications, such as voice or video transmission. In order to address this shortfall of the technology, the IEEE set up a task group that is aiming to enhance the MAC layer protocol so that it can provide QoS. The latest draft at the time of writing is Draft 11, dated October 2004. The article describes the yet-to-be-ratified 802.11e standard and is based on that draft.

Wireless LAN : a grande questão ; 802.11a ou 802.11b?

Este trabalho apresenta, inicialmente, uma análise comparativa detalhada dos dois padrões, IEEE 802.11a e IEEE802.11b, que foram apresentados recentemente pelo IEEE na área de redes sem fio (wireless). São apresentadas as principais diferenças tecnológicas dos dois padrões, no que se refere, principalmente, à arquitetura, funções de controle, segurança, desempenho e custo de implementação destas duas tecnologias de redes wireless. São avaliados também os aspectos de interoperabilidade, quando estas redes são integradas em redes corporativas fixas, que são baseadas, principalmente, em redes Ethernet, tradicionalmente usadas em redes corporativas. São considerados também, aspectos de custo e flexibilidade de aplicação das duas tecnologias e mostram-se como estas diferenças devem ser levadas em conta em aplicações típicas de um ambiente corporativo. Finalmente, apresenta-se também, como estudo de caso, uma análise focalizada principalmente na integração da tecnologia wireless em aplicações típicas de uma grande empresa local. Consideram-se as vantagens e desvantagens de ambas as tecnologias, como solução para algumas aplicações típicas encontradas nesta empresa, e justifica-se a escolha da solução que foi adotada. Conclui-se com algumas projeções quanto ao futuro da tecnologia wireless no ambiente público e corporativo.

4-Dimethylaminocinnamylidenepyruvic acid: Synthesis, characterization and complexation with trivalent lanthanides, yttrium(III), scandium(III), thorium(IV) and uranium(VI) in aqueous solution

4-Dimethylaminocinnamylidenepyruvic acid (H-DMCP)and its sodium salt (Na-DMCP) have been synthesized and characterized. The protonation constant of DMCP as well as the stability constants of its binary 1:1 complexes with trivalent lanthanides (except Pm), Yttrium(III), Scandium(III), Thorium(IV) and Uranium(VI) were determined in an aqueous medium at 25°C and ionic strength 0.500 M. The mode of coordination of this ligand is discussed.

Características principais de pacientes com PSA menor ou igual a 4,0 ng/ml, submetidos à biópsia de próstata guiada pelo ultrassom transretal

Pós-graduação em Bases Gerais da Cirurgia - FMB

Comparación de los resultados provisorios del censo de la República Argentina (15-05-91) con las proyecciones vigentes

Incluye Bibliografía

SwImax: um simulador em realidade virtual para auxiliar o ensino do padrão WiMAX

O padrão IEEE 802.16, também chamado de WiMAX, é uma tecnologia da rede banda larga sem fio para áreas metropolitanas, utilizado como alternativa para transmissão de sinal de Internet a regiões que não possuem infraestrutura de rede cabeada. Atualmente, o ensino desta tecnologia em sala de aula é meramente teórico, o que dificulta a compreensão dos alunos com relação a determinadas funcionalidades do WiMAX. Nesse sentido, a presente dissertação aborda o projeto de desenvolvimento de um simulador em Realidade Virtual, chamado SwImax, voltado para auxílio do ensino do padrão IEEE 802.16. Assim, o SwImax simula algumas características do funcionamento deste padrão, quais sejam: faixas de frequência de operação, área de cobertura, procedimento de handover, transmissão sem linha de visada, entre outros. A dissertação apresenta os trabalhos correlatos que influenciaram o desenvolvimento do projeto, além de um resumo acerca do padrão IEEE 802.16. O texto apresenta também as ferramentas utilizadas no desenvolvimento do SwImax e a implementação do simulador. Ao final do desenvolvimento, o software foi submetido a uma avaliação dos usuários, de modo que os resultados também são abordados nesta dissertação.

Enabling Blocks for Integrated CMOS UWB Transceivers

The last decades have seen an unrivaled growth and diffusion of mobile telecommunications. Several standards have been developed to this purposes, from GSM mobile phone communications to WLAN IEEE 802.11, providing different services for the the transmission of signals ranging from voice to high data rate digital communications and Digital Video Broadcasting (DVB). In this wide research and market field, this thesis focuses on Ultra Wideband (UWB) communications, an emerging technology for providing very high data rate transmissions over very short distances. In particular the presented research deals with the circuit design of enabling blocks for MB-OFDM UWB CMOS single-chip transceivers, namely the frequency synthesizer and the transmission mixer and power amplifier. First we discuss three different models for the simulation of chargepump phase-locked loops, namely the continuous time s-domain and discrete time z-domain approximations and the exact semi-analytical time-domain model. The limitations of the two approximated models are analyzed in terms of error in the computed settling time as a function of loop parameters, deriving practical conditions under which the different models are reliable for fast settling PLLs up to fourth order. Besides, a phase noise analysis method based upon the time-domain model is introduced and compared to the results obtained by means of the s-domain model. We compare the three models over the simulation of a fast switching PLL to be integrated in a frequency synthesizer for WiMedia MB-OFDM UWB systems. In the second part, the theoretical analysis is applied to the design of a 60mW 3.4 to 9.2GHz 12 Bands frequency synthesizer for MB-OFDM UWB based on two wide-band PLLs. The design is presented and discussed up to layout level. A test chip has been implemented in TSMC CMOS 90nm technology, measured data is provided. The functionality of the circuit is proved and specifications are met with state-of-the-art area occupation and power consumption. The last part of the thesis deals with the design of a transmission mixer and a power amplifier for MB-OFDM UWB band group 1. The design has been carried on up to layout level in ST Microlectronics 65nm CMOS technology. Main characteristics of the systems are the wideband behavior (1.6 GHz of bandwidth) and the constant behavior over process parameters, temperature and supply voltage thanks to the design of dedicated adaptive biasing circuits.

Performance Analysis and Comparison between Legacy-PSM and U-APSD

This paper evaluates the performance of the most popular power saving mechanisms defined in the IEEE 802.11 standard, namely the Power Save Mode (Legacy-PSM) and the Unscheduled Automatic Power Save Delivery (U-APSD). The assessment comprises a detailed study concerning energy efficiency and capability to guarantee the required Quality of Service (QoS) for a certain application. The results, obtained in the OMNeT++ simulator, showed that U-APSD is more energy efficient than Legacy-PSM without compromising the end-to- end delay. Both U-APSD and Legacy-PSM revealed capability to guarantee the application QoS requirements in all the studied scenarios. However, unlike U-APSD, when Legacy-PSM is used in the presence of QoS demanding applications, all the stations connected to the network through the same access point will consume noticeable additional energy.