969 resultados para HCl
Resumo:
目的:从金环蛇蛇毒中分离纯化名为bungaruskunin 1的一种新型胰蛋白酶抑制剂,并从其毒腺的cDNA文库中克隆出该胰蛋白酶抑制剂的cDNA全序列.方法:通过Sephadex G-50, CM-Sephadex C-25, HPLC, RP-HPLC (C4 column)方法分离纯化bungaruskunin 1.样品的丝氨酸蛋白酶抑制剂活性则是在室温条件下50mmol·L-1 Tris-HCl, pH 7.8的缓冲液中通过对显色底物的水解抑制作用来检测的.金环蛇毒腺RNA用TRIZOL提取,并用SMARTM PCR cDNA synthesis kit (Clontech)建成cDNA文库.根据其信号肽的保守区域合成引物从该文库中扩增出bungaruskunin 1的cDNA全序列,进行胶回收,酶连到pMDl8-T载体中转化测序.结果:bungaruskunin 1的前体由83个氨基酸组成,其中信号肽含有24个氨基酸,成熟肽即:bungaruskunin 1合有59个氨基酸.bungaruskunin 1的cDNA序列与从红腹伊澳蛇Pseudechis porphyriacus中分离纯化得到的丝氨酸蛋白酶抑制剂blackelin的cDNA序列的相似性高达64%.bungaruskunin 1是一种含有保守Kunitz端的Kuntiz蛋白酶抑制剂家族的一员,从而能够抑制蛋白酶和弹性酶的活性.在cDNA文库中,我们同时还筛选到了2种新的β-bungarotoxin B链的序列.结论:这些发现很好地证明了蛇中Kunitz/BPTI胰蛋白酶抑制剂和毒性神经的家族可能起源于共同的祖先.
Resumo:
While conducting experiments to investigate antimicrobial peptides of amphibians living in the Yunnan-Sichuan region of southwest China, a new family of antimicrobial peptides was identified from skin secretions of the rufous-spotted torrent frog, Amolops loloensis. Members of the new peptide family named amolopins are composed of 18 amino acids with a unique sequence, for example, NILSSIVNGINRALSFFG. By BLAST search, amolopins did no show similarity to any known peptides. Among the tested microorganisms, native and synthetic peptides only showed antimicrobial activities against Staphylococcus aureus ATCC2592 and Bacillus pumilus, no effects on other microorganisms. The CD spectroscopy showed that it adopted a structure of random combined with beta-sheet in water, Tris-HCl or Tris-HCl-SDS. Several cDNAs encoding amolopins were cloned from the skin cDNA library of A. loloensis. The precursors of amolopin are composed of 62 amino acid residues including predicted signal peptides, acidic propieces, and mature antimicrobial peptides. The preproregion of amolopin precursor comprises a hydrophobic signal peptide of 22 residues followed by an 18 residue acidic propiece which terminates by a typical prohormone processing signal Lys-Arg. The preproregions of precursors are very similar to other amphibian antimicrobial peptide precursors but the mature amolopins are different from other antimicrobial peptide families. The remarkable similarity of preproregions of precursors that give rise to very different antimicrobial peptides in distantly related frog species suggests that the corresponding genes form a multigene family originating from a common ancestor. (C) 2008 Elsevier Masson SAS. All rights reserved.
Resumo:
目的 研究脱抗原水牛角胎移植后的免疫排斥反应和成骨效应。方法 以日本大耳白兔为动物模型,分别植入经30% H_2O_2、0.6 mol/L HCl脱抗原脱钙,30% H_2O_2脱抗原不脱钙2种温和方法处理的水牛角胎至兔左侧肢骨缺损处。体外检测外周血特异性T淋巴细胞转化率和ELISA检测血清特异性抗角胎IgG抗体。结果 脱抗原脱钙处理显著地降低了角胎的抗原性,与对照相比,未见受体对移植物产生显著的特异性细胞和体液免疫反应(P > 0.05),尤其是脱抗原不脱钙角胎效果更佳。两者成骨效果均良好。结论 脱抗原角胎是一种免疫原性低、成骨效果好、来源方便的骨移植材料。
Resumo:
以滇池2个典型的严重富营养化湖湾———马村湾和海东湾为研究区域,研究分析了2个湖湾沉积物及水体悬浮物中4种磷的赋存形态:松散吸附态磷(NH4Cl-P)、氧化还原敏感态磷(BD-P)、金属结合态磷(NaOH-P)和钙结合态磷(HCl-P)以及有机质含量及总磷(TP)含量.结果表明:沉积物随着风浪搅动悬浮进入水体后,4种形态的磷含量及其所占总磷的比例均发生了较大变化,NH4Cl-P的含量升高,是由于快速的吸附作用所致;NaOH-P在4种磷形态中的比例下降,含量上升,表明沉积物再悬浮进入水体后磷的活化特性加大,
Resumo:
Reactive magnesia (MgO) cements have emerged as a potentially more sustainable and technically superior alternative to Portland cement due to their lower production temperature and ability to sequester significant quantities of CO2. Porous blocks containing MgO were found to achieve higher strength values than PC blocks. A number of variables are investigated to achieve maximum carbonation and associated high strengths. This paper focuses on the impact of four different hydrated magnesium carbonates (HMCs) as cement replacements of either 20 or 50%. Accelerated carbonation (20 C, 70-90% RH, 20% CO2) is compared with natural curing (20 C, 60-70% RH, ambient CO2). SEM, TG/DTA, XRD, and HCl acid digestion are utilized to provide a thorough understanding of the performance of MgO-cement porous blocks. The presence of HMCs resulted in the formation of larger size carbonation products with a different morphology than those in the control mix, leading to significantly enhanced carbonation and strength. © 2013 Elsevier Ltd.
Resumo:
From June 2004 to December 2004, Lake Dianchi, which had large scale of cyanobacterial blooms was investigated in order to study P-fractionation in the suspended matter and the sediment. The investigation improves our understanding of phosphorus in Lake Dianchi and the relationship between phosphorus and cyanobacterial blooms. It contributes to the available literature on the behavior of P in hypertrophic lakes. The distribution of P-fractions in Lake Dianchi was not uniform from northwest to south, but was closely related to the trophic status of the whole lake. The concentrations of total phosphorus, labile P (NH4Cl-P), Organic P (NaOH-NRP) and loss on ignition in suspended matter were positively correlated with the strength of cyanobacterial blooms. Total phosphorus in suspended matter was relatively stable for almost half an year and closely related to Chl. a concentration. The main content of organic phosphorus is in the cyanobacterial blooms. The concentrations of phosphorus bound to metal oxides and carbonates (NaOH-SRP and HCl-P) in sediment were similar to NaOH-SRP and HCl-P in the corresponding suspended matter. The latter two forms of P in suspended matter were not affected by cyanobacterial blooms, indicating that the inorganic phosphorus is derived from the sediment after resuspension from the sediment due to wind and wave action. The contribution of the different P-fractions to TP in sediment and in suspended matter indicates that NH4Cl-P in the suspended matter is an important buffer for maintaining dissolved phosphorus in water.
Resumo:
Upon heating, hydrated magnesium carbonates (HMCs) undergo a continuous sequence of decomposition reactions. This study aims to investigate the thermal decomposition of various commercially produced HMCs classified as light and heavy, highlight their differences, and provide an insight into their compositions in accordance with the results obtained from thermal analysis and microstructure studies. An understanding of the chemical compositions and microstructures, and a better knowledge of the reactions that take place during the decomposition of HMCs were achieved through the use of SEM, XRD, and TG/differential thermal analysis (DTA). The quantification of their CO 2 contents was provided by TG and dissolving the samples in HCl acid. Results show that variations exist within the microstructure and decomposition patterns of the two groups of HMCs, which do not exactly fit into the fixed stoichiometry of the known HMCs in the MgO-CO2-H2O system. The occurrence of an exothermic DTA peak was only observed for the heavy HMCs, which was attributed to their high CO2 contents and the relatively delayed decomposition pattern. © 2013 Akadémiai Kiadó, Budapest, Hungary.
Resumo:
The use of reactive magnesia (MgO) as the binder in porous blocks demonstrated significant advantages due to its low production temperatures and ability to carbonate, leading to significant strengths. This paper investigates the enhancement of the carbonation process through different curing conditions: water to cement ratio (0.6-0.9), CO2 concentration (5-20%), curing duration (1-7 days), relative humidity (55-98%), and wet/dry cycling frequency (every 0-3 days), improving the carbonation potential through increased amounts of CO2 absorbed and enhanced mechanical performance. UCS results were supported with SEM, XRD, and HCl acid digestion analyses. The results show that CO2 concentrations as low as 5% can produce the required strengths after only 1 day. Drier mixes perform better in shorter curing durations, whereas larger w/c ratios are needed for continuous carbonation. Mixes subjected to 78% RH outperformed all the others, also highlighting the benefits of incorporating wet/dry cycling to induce carbonation. © 2014 Elsevier Ltd.
Resumo:
The acid-volatile sulfide (AVS), simultaneously extracted metals (SEM), total metals, and chemical partitioning in the sediment cores of the Pearl River Estuary (PRE) were studied. The concentrations of total metals, AVS, and SEM in the sediment cores were generally low in the river outlet area, increased along the seaward direction, and decreased again at the seaward boundary of the estuary. The amounts of AVS were generally greater in deeper sediments than in surface sediments. SEM/AVS was > 1 in the surface sediments and in the river outlet cores. The ratio was < 1 in the sediments down the profiles, suggesting that AVS might play a major role in binding heavy metals in the deep sediments of the PRE. The SEM may contain different chemical forms of trace metals in the sediments, depending on the metal reaction with 1 M cold HCl in the AVS procedure compared with the results of the sequential chemical extraction. The SEM/AVS ratio prediction may overestimate trace metal availability even in the sediments with high AVS concentrations. (c) 2004 Elsevier Inc. All rights reserved.
Resumo:
Background: Some triploid and tetraploid clones have been identified in the gynogenetic gibel carp, Carassius auratus gibelio Bloch, by karyotypic and cytologic analyses over many years. Further, 5-20% males and karyotypic diversity have been found among their natural and artificial populations. However, the DNA contents and the relation to their ploidy level and chromosome numbers have not been ascertained, and whether normal meiosis occurs in spermatogenesis needs to be determined in the different clones. Methods: The sampled blood cells or sperms were mixed with blood cells from chicken or individual gibel carp and fixed in 70% pre-cooled ethanol overnight at 4degreesC. The mixed cell pellets were washed 2-3 times in 1x phosphate buffered saline and then resuspended in the solution containing 0.5% pepsin and 0.1 M HCl. DNA was stained with propidium iodide solution (40 mug/mL) containing 4 kU/ml RNase. The measurements of DNA contents were performed with Phoenix Flow Systems. Results: Triploid clones A, E, F, and P had almost equal DNA content, but triploid clone D had greater DNA content than did the other four triploid clones. DNA content of clone M (7.01 +/- 0.15 pg/nucleus) was almost equal to the DNA content of clone D (5-38 +/- 0.06 pg/nucleus) plus the DNA content of common carp sperm (1.64 +/- 0.02 pg/nucleus). The DNA contents of sperms from clones A, P, and D were half of their blood cells, suggesting that normal meiosis occurs in spermatogenesis. Conclusions: Flow cytometry is a powerful method to analyze genetic heterogeneity and ploidy level among different gynogenetic clones of polyploid gibel carp. Through this study, four questions have been answered. (a) The DNA content correlation among the five triploid clones and one multiple tetraploid clone was revealed in the gibel carp, and the contents increased with not only the ploidy level but also the chromosome number. (b) Mean DNA content was 0.052 pg in six extra chromosomes of clone D, which was higher than that of each chromosome in clones A, E, F, and P (about 0.032 pg/ chromosome). This means that the six extra chromosomes are larger chromosomes. (c) Normal meiosis occurred during spermatogenesis of the gibel carp, because DNA contents of the sperms from clones A, P, and D were almost half of that in their blood cells. (d) Multiple tetraploid clone M (7.01 +/- 0.15 pg/nucleus) contained the complete genome of clone D (5.38 +/- 0.06 pg/nucleus) and the genome of common carp sperm (1.64 +/- 0.02 pg/nucleus). Cytometry Part A 56A:46-52, 2003. (C) 2003 Wiley-Liss, Inc.
Resumo:
InGaN/GaN-multiple-quantum-well-based light emitting diode ( LED) nanopillar arrays with a diameter of approximately 200nm and a height of 700nm are fabricated by inductively coupled plasma etching using Ni self-assembled nanodots as etching mask. In comparison to the as-grown LED sample an enhancement by a factor of four of photoluminescence ( PL) intensity is achieved after the fabrication of nanopillars, and a blue shift and a decrease of full width at half maximum of the PL peak are observed. The method of additional wet etching with different chemical solutions is used to remove the etch-induced damage. The result shows that the dilute HCl ( HCl:H2O=1:1) treatment is the most effective. The PL intensity of nanopillar LEDs after such a treatment is about 3.5 times stronger than that before treatment.
Resumo:
The purpose of this article is to examine the methods and equipment for abating waste gases and water produced during the manufacture of semiconductor materials and devices. Three separating methods and equipment are used to control three different groups of electronic wastes. The first group includes arsine and phosphine emitted during the processes of semiconductor materials manufacture. The abatement procedure for this group of pollutants consists of adding iodates, cupric and manganese salts to a multiple shower tower (MST) structure. The second group includes pollutants containing arsenic, phosphorus, HF, HCl, NO2, and SO3 emitted during the manufacture of semiconductor materials and devices. The abatement procedure involves mixing oxidants and bases in an oval column with a separator in the middle. The third group consists of the ions of As, P and heavy metals contained in the waste water. The abatement procedure includes adding CaCO3 and ferric salts in a flocculation-sedimentation compact device equipment. Test results showed that all waste gases and water after the abatement procedures presented in this article passed the discharge standards set by the State Environmental Protection Administration of China.
Resumo:
A new algorithm, representing an important advance in determination of the functional relationship, is first reported here. The algorithm is very useful and convenient for analyzing the incorporation of impurities. To show how the algorithm works, two early and well-known vapor phase epitaxy (VPE) experiments-Ashen's (Ashen, D. J.; Dean, P. J.; Hurle, D. T. J.; Mullin, J. B.; Royle, A.; White, A. M. Gallium Arsenide and Related Compounds, Institute of Physics Conference Series 24, 1974; Institute of Physics: London, 1975; p 229.), involving the doping of silicon and DiLorenzo's (DiLorenzo, J. V. J. Cryst. Growth 1972, 17, 189.), involving the mole fraction effect-are calculated to find the functional relationship between the Si contamination and the partial pressure of HCl. The calculated curves agree with the experimental results. A conclusion that the calculated values are greater than the true values has been drawn.
Resumo:
垃圾的处置已成为全球性环境问题。与填埋法相比,焚烧、热解和气化等热处理法具有减容、减量和能源化利用等优点。如何控制垃圾焚烧过程中HCI、二恶英和未燃尽碳氢化合物等污染物的排放也引起越来越多国家的关注。采用先热解(或气化)再气相燃烧的方法以及对垃圾预处理保持垃圾组成相对稳定的RDF技术是减少二次污染的有效手段。喷动技术能够用相对较小气量流化较粗大颗粒,是进行RDF热解的较佳选择。但RDF具有密度小、流动性差等特点,考虑减少空气量和改善RDF流动性,在喷动床中水平引入辅助气,称为"喷流一移动床"。本论文首先在室温下对喷流一移动床的流体力学特性进行了研究。结果表明,水平辅助气的引入可以降低中心最小喷动气速,调控喷泉高度,提高环流区颗粒的流动速度,增大颗粒的循环流量。在此基础上,根据先部分燃烧部分热解后气相燃烧以及自热型的原则,设计了下部为喷流一移动床热解室上部为气相燃烧室的两段式RDF热解燃烧反应器,并利用实验室内制备的RDF对该反应器的运行特性进行了评价。论文对喷动空气量和辅助空气量对热解室温度分布、气体分布,二次空气对燃烧室温度分布以及CO和NOx的释放特性的影响进行了研究,然后对有机氯(PVC)和无机氯(NaCI)产生Hcl特性、Ca(OH)2对HCI的脱除特性及机理进行了研究。实验结果表明,RDF可以成功地进行自热型的先热解后气相燃烧,通过改变空气/燃料比可以控制热解室温度,水平辅助气的引入可以使热解室轴向温度分布更加均匀,热解室中可以得到O2含量低于2v%热解气体,热解气体在燃烧室中能完全燃烧。二次空气能够控制燃烧室温度以及Co和NOx的排放。PVC中氯能产生较大数量的HCI外,NaCl同样也可生成HCl;温度对PVC生成HCI量的影响很小,而对NaCI却起主要影响作用。漓温不利于钙化物与HCI反应的进仃,同时CaC12在高温时与石英砂(SiO2)、水蒸汽反应产生HCl,因此Ca(OH)2的脱氯效率会降低。
Resumo:
以22年定位试验为基础,研究黄土高原长期种植紫花苜蓿(Medicago sativaL.)情况下土壤硫、钙、镁组分的变化。结果表明:长期施P使苜蓿连作耕层土壤总硫、有效硫、水溶性硫、吸附性硫、HCl可溶性硫、总无机硫和有机硫含量分别增加9.41%、62.41%、47.51%、30.07%、2.25%、5.38%和17.54%;长期施NPM使苜蓿连作耕层土壤总硫、有效硫、水溶性硫、吸附性硫、HCl可溶性硫、总无机硫和有机硫含量分别增加20.89%、98.31%、68.44%、57.34%、8.07%、12.54%和37.69%。长期施P使苜蓿连作耕层土壤全钙、有效钙、水溶态钙、交换态钙和酸溶态钙含量增加分别增加4.64%、4.27%、11.66%、4.05%和8.59%,但残余态钙含量降低2.21%;长期施NPM使苜蓿连作耕层土壤全钙、有效钙、水溶态钙、交换态钙和酸溶态钙含量增加分别增加8.69%、8.30%、51.59%、6.73%和27.77%,但残余态钙含量降低26.23%。长期施NPM使苜蓿连作耕层土壤全镁、有效镁、水溶态镁、交换态镁、酸溶态镁和残余态镁含量分别增加7.38%、61.98%、63.16%...