Cobalt electrodeposition onto highly oriented pyrolytic graphite (HOPG) electrode from ammonium sulfate solutions

It was carried out an electrochemical study of the cobalt electrodeposition onto HOPG electrode from an aqueous solution containing 10-2 M of CoSO4 + 1M (NH4)2SO4. Nucleation parameters such as nucleation rate, density of active nucleation sites, saturation nucleus and the rate constant of the proton reduction reaction (kPR) were determined from potentiostatic studies. An increase in kPR values with the decrease in the applied potential suggested a competition between H+ and Co2+ by the active sites on the surface. The ΔG energy calculated for the formation of stable nucleus was 8.21x10-21 J/nuclei. The AFM study indicated the formation of small clusters of 50-400 nm in diameter and 2-120 nm in height.

Retrieval of kinetic rates in reactions with semi batch liquid phase using ill-posed inverse problem theory

A neural network procedure to solve inverse chemical kinetic problems is discussed in this work. Rate constants are calculated from the product concentration of an irreversible consecutive reaction: the hydrogenation of Citral molecule, a process with industrial interest. Simulated and experimental data are considered. Errors in the simulated data, up to 7% in the concentrations, were assumed to investigate the robustness of the inverse procedure. Also, the proposed method is compared with two common methods in nonlinear analysis; the Simplex and Levenberg-Marquardt approaches. In all situations investigated, the neural network approach was numerically stable and robust with respect to deviations in the initial conditions or experimental noises.

Copper electrodeposition on glassy carbon and highly oriented pyrolytic graphite substrates from perchlorate solutions

In present work, we analyzed the copper electrodeposition onto GCE (System I) and HOPGE (System II) from perchlorate solutions. The current density transients obtained from system I and II were well described through a kinetic mechanism that involves four different contributions: (a) a Langmuir type adsorption process, b) an electron transfer from Cu2+→Cu+, (c) a 3D nucleation limited by a mass transfer reaction and (d) a proton reduction process. It was observed that the values of the nucleation rate, the number of active nucleation sites were increased with the overpotential and they are bigger onto GCE in comparison with HOPGE.

Modeling and developing a customer-oriented configuration process in a mass customization environment

In this thesis the main objective is to examine and model configuration system and related processes. When and where configuration information is created in product development process and how it is utilized in order-delivery process? These two processes are the essential part of the whole configuration system from the information point of view. Empirical part of the work was done as a constructive research inside a company that follows a mass customization approach. Data models and documentation are created for different development stages of the configuration system. A base data model already existed for new structures and relations between these structures. This model was used as the basis for the later data modeling work. Data models include different data structures, their key objects and attributes, and relations between. Representation of configuration rules for the to-be configuration system was defined as one of the key focus point. Further, it is examined how the customer needs and requirements information can be integrated into the product development process. Requirements hierarchy and classification system is presented. It is shown how individual requirement specifications can be connected for physical design structure via features by developing the existing base data model further.

The effectiveness of vocationally oriented multidisciplinary rehabilitation (ASLAK®) amongst public sector employees

In Finland, vocationally oriented medical rehabilitation (ASLAK®) is a common preventive rehabilitation measure with the primary goal of preserving and improving work ability. The ASLAK® programme has been used for almost 30 years, although limited data exist on its effectiveness. The aims of this study were to determine whether the increased risk of work disability predicts the participants’ likelihood to be granted ASLAK® rehabilitation and to assess the effectiveness of the programme in decreasing the risk of work disability and modifying health-risk behaviours. This study is a part of the on-going Finnish Public Sector Study conducted by the Finnish Institute of Occupational Health. Data on 53 416 employees (81% women) were gathered from employers’ records, national health registers and repeated survey responses. During the 5-year follow-up, increased levels of the risk factors for work disability did not predict participation in the rehabilitation programme. During the 2.8-year followup (range 0.04–5.0 years), the risk of long-term work disability (sick leave >90 days or retirement) overall or, more specifically, due to musculoskeletal or mental diseases did not differ between the rehabilitants who participated in ASLAK® in 1997–2005 and their propensity score matched controls. There was no evidence of ASLAK® being effective in changing participants’ health-risk behaviours or in improving perceived general or mental health. The results suggest that potential participant recognition, mainly taking place in occupational health care, may fail to identify those with a higher risk of work disability. No evidence on the effectiveness of the programme was found in the study cohort when measured by the selected indicators.

Finnish Institutional Innovation Support Policies from Russian Entrepreneurs' Perspective: Establishing Cross-Border Technology Oriented Start-Up Firm

The purpose of this thesis is to study how Russian entrepreneurs perceive Finnish institutional environment and innovation support policies provided in the country, as well as to present a practical example in form of a case study of one technology oriented start-up firm which was established in Finland by Russian entrepreneurs. The empirical research of the thesis is conducted qualitatively in two parts. First part is conducted through online questionnaire with open questions in order to review the perceptions of Russian entrepreneurs in general. Second part is based on personal interviews with case company’s founders with the focus on the process of establishing the company in Finland. In the first part of the empirical research, five Russian start-up firms were contacted, and four responses were received. All of these responses were qualified for further analysis. The findings of the first part of the research reveal that Russian entrepreneurs have rather positive attitudes towards Finnish institutional innovation support policies. However, most of the entrepreneurs stated that they are unlikely to create their presence in Finland. As an outcome of the second part of the research, the process of establishing a case company in Finland is illustrated. In order to be able to establish companies in Finland, Russian entrepreneurs who have a permanent residence outside European Economic Area (EEA) are required to apply for a permission to perform business operations in the country. In addition, the established company must engage in improving the economical stand of the country by creating new work places, raising tax revenues, develop technologies and generate innovations in the country.

Building object-oriented software with the D-Bus messaging system

Object-oriented programming is a widely adopted paradigm for desktop software development. This paradigm partitions software into separate entities, objects, which consist of data and related procedures used to modify and inspect it. The paradigm has evolved during the last few decades to emphasize decoupling between object implementations, via means such as explicit interface inheritance and event-based implicit invocation. Inter-process communication (IPC) technologies allow applications to interact with each other. This enables making software distributed across multiple processes, resulting in a modular architecture with benefits in resource sharing, robustness, code reuse and security. The support for object-oriented programming concepts varies between IPC systems. This thesis is focused on the D-Bus system, which has recently gained a lot of users, but is still scantily researched. D-Bus has support for asynchronous remote procedure calls with return values and a content-based publish/subscribe event delivery mechanism. In this thesis, several patterns for method invocation in D-Bus and similar systems are compared. The patterns that simulate synchronous local calls are shown to be dangerous. Later, we present a state-caching proxy construct, which avoids the complexity of properly asynchronous calls for object inspection. The proxy and certain supplementary constructs are presented conceptually as generic object-oriented design patterns. The e ect of these patterns on non-functional qualities of software, such as complexity, performance and power consumption, is reasoned about based on the properties of the D-Bus system. The use of the patterns reduces complexity, but maintains the other qualities at a good level. Finally, we present currently existing means of specifying D-Bus object interfaces for the purposes of code and documentation generation. The interface description language used by the Telepathy modular IM/VoIP framework is found to be an useful extension of the basic D-Bus introspection format.

Exploring Customer-Oriented Service Offerings in Public Health: Developing Integrated Health Care Services for Rural Areas

Väestön ikääntyminen pakottaa yhteiskunnan ja julkisen terveydenhuollon muutoksiin. Jotta ikääntyvien ihmisten kotona asuminen voidaan mahdollistaa, palvelujärjestelmän pitää mukautua muuttuvaan tilanteeseen. Tämän diplomityön tarkoituksena on tunnistaa asiakaslähtöisiä lähellä asiakasta tarjottavia palvelukokonaisuuksia. Tutkimuksen teoreettinen viitekehys muodostuu asiakasarvon luomisesta ja palvelutarjoamista. Tarkasteluryhmänä on Etelä-Karjalan alueen 60–90-vuotiaat ja käytetty aineisto on kerätty vastaajilta postitse lähetetyllä kyselyllä. Tutkimus on eksploratiivinen ja tulosten tulkinnassa on hyödynnetty määrällisen tutkimuksen ja verkostoanalyysin menetelmiä. Työn keskeisimmät tulokset ovat tunnistetut asiakassegmentit ja heidän tarpeidensa pohjalta muodostetut palvelupaketit. Tulokset indikoivat asiakkaiden tarpeita ja tuloksia on analysoitu myös tuottajan näkökulmasta. Empiiristen tulosten lisäksi teoriaviitekehystä on kehitetty eteenpäin, jotta palvelukeskeiset teoriat voidaan ymmärtää yritysten näkökulman lisäksi asiakkaan näkökulmasta.

A feature-based object-oriented expert system to model and support product design

In this paper a computer program to model and support product design is presented. The product is represented through a hierarchical structure that allows the user to navigate across the product’s components, and it aims at facilitating each step of the detail design process. A graphical interface was also developed, which shows visually to the user the contents of the product structure. Features are used as building blocks for the parts that compose the product, and object-oriented methodology was used as a means to implement the product structure. Finally, an expert system was also implemented, whose knowledge base rules help the user design a product that meets design and manufacturing requirements.

Object-oriented Programming Applied to the Development of Structural Analysis and Optimization Software

This paper presents the development of a two-dimensional interactive software environment for structural analysis and optimization based on object-oriented programming using the C++ language. The main feature of the software is the effective integration of several computational tools into graphical user interfaces implemented in the Windows-98 and Windows-NT operating systems. The interfaces simplify data specification in the simulation and optimization of two-dimensional linear elastic problems. NURBS have been used in the software modules to represent geometric and graphical data. Extensions to the analysis of three-dimensional problems have been implemented and are also discussed in this paper.

On state and parameter estimation in chaotic systems

State-of-the-art predictions of atmospheric states rely on large-scale numerical models of chaotic systems. This dissertation studies numerical methods for state and parameter estimation in such systems. The motivation comes from weather and climate models and a methodological perspective is adopted. The dissertation comprises three sections: state estimation, parameter estimation and chemical data assimilation with real atmospheric satellite data. In the state estimation part of this dissertation, a new filtering technique based on a combination of ensemble and variational Kalman filtering approaches, is presented, experimented and discussed. This new filter is developed for large-scale Kalman filtering applications. In the parameter estimation part, three different techniques for parameter estimation in chaotic systems are considered. The methods are studied using the parameterized Lorenz 95 system, which is a benchmark model for data assimilation. In addition, a dilemma related to the uniqueness of weather and climate model closure parameters is discussed. In the data-oriented part of this dissertation, data from the Global Ozone Monitoring by Occultation of Stars (GOMOS) satellite instrument are considered and an alternative algorithm to retrieve atmospheric parameters from the measurements is presented. The validation study presents first global comparisons between two unique satellite-borne datasets of vertical profiles of nitrogen trioxide (NO3), retrieved using GOMOS and Stratospheric Aerosol and Gas Experiment III (SAGE III) satellite instruments. The GOMOS NO3 observations are also considered in a chemical state estimation study in order to retrieve stratospheric temperature profiles. The main result of this dissertation is the consideration of likelihood calculations via Kalman filtering outputs. The concept has previously been used together with stochastic differential equations and in time series analysis. In this work, the concept is applied to chaotic dynamical systems and used together with Markov chain Monte Carlo (MCMC) methods for statistical analysis. In particular, this methodology is advocated for use in numerical weather prediction (NWP) and climate model applications. In addition, the concept is shown to be useful in estimating the filter-specific parameters related, e.g., to model error covariance matrix parameters.