A nonlinear elliptic problem with terms concentrating in the boundary

In this paper, we investigate the behavior of a family of steady-state solutions of a nonlinear reaction diffusion equation when some reaction and potential terms are concentrated in a e-neighborhood of a portion G of the boundary. We assume that this e-neighborhood shrinks to G as the small parameter e goes to zero. Also, we suppose the upper boundary of this e-strip presents a highly oscillatory behavior. Our main goal here was to show that this family of solutions converges to the solutions of a limit problem, a nonlinear elliptic equation that captures the oscillatory behavior. Indeed, the reaction term and concentrating potential are transformed into a flux condition and a potential on G, which depends on the oscillating neighborhood. Copyright (C) 2012 John Wiley & Sons, Ltd.

Newtonian acceleration scales in spiral galaxies

We revisit the issue of the constancy of the dark matter (DM) and baryonic Newtonian acceleration scales within the DM scale radius by considering a large sample of late-type galaxies. We rely on a Markov Chain Monte Carlo method to estimate the parameters of the halo model and the stellar mass-to-light ratio and then propagate the uncertainties from the rotation curve data to the estimate of the acceleration scales. This procedure allows us to compile a catalogue of 58 objects with estimated values of the B-band absolute magnitude M-B, the virial mass M-vir, and the DM and baryonic Newtonian accelerations (denoted as g(DM)(r(0)) and g(bar)(r(0)), respectively) within the scale radius r(0) which we use to investigate whether it is possible to define a universal acceleration scale. We find a weak but statistically meaningful correlation with M-vir thus making us argue against the universality of the acceleration scales. However, the results somewhat depend on the sample adopted so that a careful analysis of selection effects should be carried out before any definitive conclusion can be drawn.

ABSENCE OF STABILIZATION POINT OF THE SPECIES ACCUMULATION CURVE IN TROPICAL FORESTS

The definition of the sample size is a major problem in studies of phytosociology. The species accumulation curve is used to define the sampling sufficiency, but this method presents some limitations such as the absence of a stabilization point that can be objectively determined and the arbitrariness of the order of sampling units in the curve. A solution to this problem is the use of randomization procedures, e. g. permutation, for obtaining a mean species accumulation curve and empiric confidence intervals. However, the randomization process emphasizes the asymptotical character of the curve. Moreover, the inexistence of an inflection point in the curve makes it impossible to define objectively the point of optimum sample size.

Inclusive charged hadron elliptic flow in Au+Au collisions at root s(NN)=7.7-39 GeV

A systematic study is presented for centrality, transverse momentum (p(T)), and pseudorapidity (eta) dependence of the inclusive charged hadron elliptic flow (v(2)) at midrapidity (vertical bar eta vertical bar < 1.0) in Au + Au collisions at root s(NN) = 7.7, 11.5, 19.6, 27, and 39 GeV. The results obtained with different methods, including correlations with the event plane reconstructed in a region separated by a large pseudorapidity gap and four-particle cumulants (v(2){4}), are presented to investigate nonflow correlations and v(2) fluctuations. We observe that the difference between v(2){2} and v(2){4} is smaller at the lower collision energies. Values of v(2), scaled by the initial coordinate space eccentricity, v(2)/epsilon, as a function of p(T) are larger in more central collisions, suggesting stronger collective flow develops in more central collisions, similar to the results at higher collision energies. These results are compared to measurements at higher energies at the Relativistic Heavy Ion Collider (root s(NN) = 62.4 and 200 GeV) and at the Large Hadron Collider (Pb + Pb collisions at root s(NN) = 2.76 TeV). The v(2)(pT) values for fixed pT rise with increasing collision energy within the pT range studied (<2 GeV/c). A comparison to viscous hydrodynamic simulations is made to potentially help understand the energy dependence of v(2)(pT). We also compare the v(2) results to UrQMD and AMPT transport model calculations, and physics implications on the dominance of partonic versus hadronic phases in the system created at beam energy scan energies are discussed.

Matrix-vector multiplication and triangular linear solver using GPGPU for symmetric positive definite matrices derived from elliptic equations

The modern GPUs are well suited for intensive computational tasks and massive parallel computation. Sparse matrix multiplication and linear triangular solver are the most important and heavily used kernels in scientific computation, and several challenges in developing a high performance kernel with the two modules is investigated. The main interest it to solve linear systems derived from the elliptic equations with triangular elements. The resulting linear system has a symmetric positive definite matrix. The sparse matrix is stored in the compressed sparse row (CSR) format. It is proposed a CUDA algorithm to execute the matrix vector multiplication using directly the CSR format. A dependence tree algorithm is used to determine which variables the linear triangular solver can determine in parallel. To increase the number of the parallel threads, a coloring graph algorithm is implemented to reorder the mesh numbering in a pre-processing phase. The proposed method is compared with parallel and serial available libraries. The results show that the proposed method improves the computation cost of the matrix vector multiplication. The pre-processing associated with the triangular solver needs to be executed just once in the proposed method. The conjugate gradient method was implemented and showed similar convergence rate for all the compared methods. The proposed method showed significant smaller execution time.

Probabilistic Envelope Curves for Extreme Rainfall Events - Curve Inviluppo Probabilistiche per Precipitazioni Estreme

A regional envelope curve (REC) of flood flows summarises the current bound on our experience of extreme floods in a region. RECs are available for most regions of the world. Recent scientific papers introduced a probabilistic interpretation of these curves and formulated an empirical estimator of the recurrence interval T associated with a REC, which, in principle, enables us to use RECs for design purposes in ungauged basins. The main aim of this work is twofold. First, it extends the REC concept to extreme rainstorm events by introducing the Depth-Duration Envelope Curves (DDEC), which are defined as the regional upper bound on all the record rainfall depths at present for various rainfall duration. Second, it adapts the probabilistic interpretation proposed for RECs to DDECs and it assesses the suitability of these curves for estimating the T-year rainfall event associated with a given duration and large T values. Probabilistic DDECs are complementary to regional frequency analysis of rainstorms and their utilization in combination with a suitable rainfall-runoff model can provide useful indications on the magnitude of extreme floods for gauged and ungauged basins. The study focuses on two different national datasets, the peak over threshold (POT) series of rainfall depths with duration 30 min., 1, 3, 9 and 24 hrs. obtained for 700 Austrian raingauges and the Annual Maximum Series (AMS) of rainfall depths with duration spanning from 5 min. to 24 hrs. collected at 220 raingauges located in northern-central Italy. The estimation of the recurrence interval of DDEC requires the quantification of the equivalent number of independent data which, in turn, is a function of the cross-correlation among sequences. While the quantification and modelling of intersite dependence is a straightforward task for AMS series, it may be cumbersome for POT series. This paper proposes a possible approach to address this problem.

La sensitività delle curve a fatica oligociclica rispetto alle colate di derivazione per i provini: applicazione alla caratterizzazione di un materiale per cappe di turboalternatore

In questo studio vengono riportati i risultati di prove di fatica oligociclica eseguiti su provini dello stesso materiale ottenuti con uguali processi tecnologici ma provenienti da differenti colate di metallo. Il materiale in questione è un acciaio di elevata qualità frequentemente utilizzato per la realizzazione di cappe per turboalternatori. Obiettivo dello studio è stato ricavare i coefficienti necessari per tracciare le curve di fatica del materiale, non ancora presenti in letteratura, ed infine indagare la bontà del risultato ottenuto con un’analisi statistica delle curve e dei risultati ottenuti. Nella prima parte è descritto l’attuale stato dell’arte e la situazione in cui si colloca il presente studio. Nella seconda parte viene fornita una descrizione dettagliata del materiale studiato, delle condizioni nelle quali sono state eseguite le prove e delle attrezzature utilizzate a tale scopo. Si conclude esponendo i risultati ottenuti, comprensivi dei confronti e delle considerazioni derivate dalle analisi statistiche eseguite.

Il gruppo dei punti razionali sulle curve ellittiche

Il primo capitolo espone nozioni generali sulle varietà e sulle curve algebriche, sulle mappe fra di esse e su alcune proprietà geometriche importanti per caratterizzare le curve ellittiche. Il secondo capitolo propone un'introduzione allo studio geometrico e algebrico di tali curve. Il terzo e il quarto capitolo affrontano lo studio dei punti a coordinate razionali, per curve definite prima su campi locali e poi su campi globali: l'insieme di tali punti è un gruppo. Il risultato fondamentale, contenuto nel teorema di Mordell-Weil, è che tale gruppo è finitamente generato. Tutto il quarto capitolo propone i risultati necessari per la dimostrazione di tale affermazione.

Mapping class group e complesso delle curve per superfici di Heegaard

In una 3-varietà chiusa è possibile individuare alcune superfici (dette di Heegaard) tali che, tagliando la 3-varietà lungo una di queste, essa si spezza in due corpi con manici che hanno per bordo tale superficie. La tesi propone alcuni recenti risultati circa l'interazione tra la topologia della 3-varietà, il gruppo di automorfismi delle sue superfici di Heegaard e complessi simpliciali costruiti a partire dalle curve su tali superfici.

Le curve piane: dallo studio in geometria alla trattazione scolastica

L'argomento trattato in questa tesi riguarda lo studio geometrico delle curve piane. Una prima parte è dedicata alle varie definizioni di curva in matematica, la seconda tratta invece la presentazione delle curve da un punto di vista scolastico. Il mio lavoro è stato quello di analizzare alcuni testi delle scuole superiori allo scopo di evidenziare, laddove è stato possibile, il tipo di appproccio didattico utilizzato per presentare tali argomenti.