966 resultados para Design. Mobile interface. Fibromialgia. Design centrado no usuário. Escala de dor


Relevância:

50.00% 50.00%

Publicador:

Resumo:

Este trabalho apresenta um estudo sobre a relação existente entre as variáveis de rugosidade, dureza e condutividade térmica de alguns materiais utilizados em design de produto e a percepção tátil. Inicialmente, foram realizadas pesquisas de descritores subjetivos que os usuários relacionavam com o ato de tocar. A partir destes resultados, foram identificadas características superficiais dos materiais que estavam ligadas a estes descritores. Foi possível então, desenvolver amostras em diferentes materiais (cerâmicos, poliméricos, metálicos e naturais), para serem testadas em ensaios diversos. Os primeiros testes realizados, permitiam a visualização das amostras. Posteriormente, foram realizados ensaios de forma que os entrevistados não podiam visualizar as amostras. Desta forma, somente a percepção tátil era testada sem influência dos demais órgãos dos sentidos. Nestes testes, os entrevistados verificavam entre as variáveis abordadas no trabalho (rugosidade, dureza e condutividade térmica), se haviam diferenças entre as amostras e ordenavam de maior à menor conforme o que era percebido. Com base nas respostas obtidas, e também nos valores atribuídos às amostras para as variáveis já relacionadas anteriormente, foi possível verificar limiares de percepção e também, a relação existente entre o que é percebido e os valores atribuídos às respectivas variáveis tecnológicas. Os resultados obtidos indicam que a percepção de diferentes texturas, foi mais facilmente detectada do que diferenças de condutividade térmica e principalmente de dureza. A preferência por texturas menos rugosas foi detectada em grande parte das respostas obtidas Da mesma forma, pode-se dizer que a temperatura ambiente de realização dos testes para condutividade térmica, teve influência direta nas respostas obtidas. Para os ensaios aplicados, não houve diferença grande entre respostas de adultos e de crianças e também entre crianças com deficiência visual e crianças sem deficiência. A investigação da percepção tátil, e posteriormente a relação que se pode fazer desta com algumas das propriedades dos materiais, contribui tanto na seleção de materiais para projeto de produtos, como para seleção de processos de fabricação. Sendo assim, este estudo pode servir como mais uma ferramenta no processo de criação, considerando assim os futuros usuários. Desta maneira, o vínculo entre o usuário e o produto torna-se mais forte, já que este atende às necessidades e também considera a percepção do usuário em relação aos materiais utilizados, podendo, inclusive, evitar um descarte rápido contribuindo para aumentar a sustentabilidade. Além disto, este estudo permite também que a produção nas indústrias de determinados segmentos (têxtil, brinquedos, utensílios, etc.) possa ser orientada de forma que considere limiares de percepção, evitando assim investimentos desnecessários em processos de produção que resultariam em mudanças que podem não ser percebidas pelos usuários. Em suma, os resultados obtidos neste estudo, podem ser utilizados em diversas áreas da Engenharia e do Design, agregando a estas uma ferramenta na orientação de projetos.

Relevância:

50.00% 50.00%

Publicador:

Resumo:

The most important issues in auction design are the traditional concerns of competition policy preventing collusive, predatory, and entry-deterring behaviour. Ascending and uniform-price auctions are particularly vulnerable to these problems, and the Anglo-Dutch auction a hybrid of the sealed-bid and ascending auctions may often perform better. Effective anti-trust policy is also critical. However, everything depends on the details of the context; the circum- stances of the recent U.K. mobile-phone license auction made an ascending format ideal, but this author (and others) correctly predicted the same for- mat would fail in the Netherlands and elsewhere. Auction design is not one size Þts all . We also discuss the 3G spectrum auctions in Germany, Italy, Austria and Switzerland, and football TV-rights, TV franchise and other radiospectrum auctions, electricity markets, and takeover battles.

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Este projeto teve como principal objetivo continuar o desenvolvimento do quiosque multimédia FNAC. Filial do Grupo Pinault Printemps, a FNAC é líder europeu na distribuição de bens tecnológicos e culturais. Nesta fase do desenvolvimento, o foco do projeto centrou-se na procura da melhor forma de mostrar ao utilizador a localização de um produto na loja FNAC Madeira, expansão das funcionalidades aos restantes produtos e o redesenho da interface do quiosque multimédia FNAC. Por forma a identificar uma forma eficaz de dar a conhecer ao utilizador a localização de um produto dentro da loja FNAC Madeira, foi efetuado um estudo que consistiu em questionários e testes com utilizadores para comparar duas formas de localização, por planta da loja ou por vídeo em tempo real. A primeira versão do quiosque multimédia FNAC apenas possuía suporte a livros, pelo que foi necessário tornar a aplicação o mais abstrata possível por forma a gerar as categorias de produtos em runtime recorrendo a ficheiros XML. Por fim, para redesenhar a interface do quiosque multimédia FNAC, foram efetuadas análises às interfaces da primeira versão, utilizando as heurísticas de Nielsen e os “Principles of good form” de Larry Constantine. Após a fase de análise as interfaces foram redesenhadas tendo por base a análise efetuada, o guia de norma FNAC 2011 e breves testes de usabilidade com utilizadores. Do estudo realizado, na procura pela melhor forma de localização, foram identificados alguns problemas relacionados com a utilização de um vídeo em tempo real para a identificação, tal como as interferências externas por parte dos outros clientes do espaço comercial e foi possível constatar um melhor desempenho e aceitação da localização por planta. A localização por planta mostrou-se suficiente para os utilizadores conseguirem identificar o local onde o produto estava exposto, pois permitia-lhes identificar o local onde encontravam-se e obter uma localização mais precisa do local, necessitando apenas de olhar em volta para conseguir relacionar o que era possível visualizar na planta com aquilo que os rodeava na loja.

Relevância:

50.00% 50.00%

Publicador:

Resumo:

The application of ergonomics in product design is essential to its accessibility and usability. The development of manual devices should be based on ergonomic principles. Effort perception analysis is an essential approach to understand the physical and subjective aspects of the interface. The objective of the present study was to analyze the effort perception during a simulated task with different door handles by Portuguese subjects of both genders and different ages. This transversal study agreed with ethical aspects. 180 subjects of both genders pertaining to three age groups have participated. Five door handles with different shapes were evaluated. A subjective numeric rating scale of 5 levels was used to evaluate the effort. For statistical analysis it was applied the Friedman non-parametric test. The results have showed no significant differences of effort perception in door handles "A" and "B"; "A" and "D"; and "D" and "C". Door handle "E" presented the lowest values of all. In general, there's an inverse relationship between the results of biomechanical studies and the effort perception of the same task activity. This shows that door handles design influence directly these two variables and can interfere in the accessibility and usability of these kinds of products.

Relevância:

50.00% 50.00%

Publicador:

Resumo:

The development of interactive systems involves several professionals and the integration between them normally uses common artifacts, such as models, that drive the development process. In the model-driven development approach, the interaction model is an artifact that includes the most of the aspects related to what and how the user can do while he/she interacting with the system. Furthermore, the interactive model may be used to identify usability problems at design time. Therefore, the central problematic addressed by this thesis is twofold. In the first place, the interaction modeling, in a perspective that helps the designer to explicit to developer, who will implement the interface, the aspcts related to the interaction process. In the second place, the anticipated identification of usability problems, that aims to reduce the application final costs. To achieve these goals, this work presents (i) the ALaDIM language, that aims to help the designer on the conception, representation and validation of his interactive message models; (ii) the ALaDIM editor, which was built using the EMF (Eclipse Modeling Framework) and its standardized technologies by OMG (Object Management Group); and (iii) the ALaDIM inspection method, which allows the anticipated identification of usability problems using ALaDIM models. ALaDIM language and editor were respectively specified and implemented using the OMG standards and they can be used in MDA (Model Driven Architecture) activities. Beyond that, we evaluated both ALaDIM language and editor using a CDN (Cognitive Dimensions of Notations) analysis. Finally, this work reports an experiment that validated the ALaDIM inspection method

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

50.00% 50.00%

Publicador:

Resumo:

This work presents an User Interface (UI) prototypes generation process to the softwares that has a Web browser as a plataform. This process uses UI components more complex than HTML elements. To described this components more complex this work suggest to use the XICL (eXtensinble User Interface Components Language). XICL is a language, based on XML syntax, to describe UI Components and IUs. XICL promotes extensibility and reusability in the User Interface development process. We have developed two compiler. The first one compiles IMML (Interactive Message Modeling Language) code and generates XICL code. The second one compiles XICL code and generates DHTML code

Relevância:

50.00% 50.00%

Publicador:

Resumo:

The fixation and the bone ingrowth at the interface of porous cylindrical implants (total porosity of 37% and average pores diameter of 480 mu m) were compared in vivo to rough cylindrical implants (R-a = 5.3 mu m), both of commercially pure titanium, made by powder metallurgy. The implants were inserted into the tibias of 20 rabbits and the animals were sacrificed 4 and 8 weeks after surgery. The percentage of bone-implant contact observed in porous implant was significantly larger than in the rough ones for all of sacrifice periods, respectively, 57% vs. 46% after 4 weeks, and 59% vs. 50% after 8 weeks. The mechanical tests showed a significant increase in the shear strength of the porous implants for the two analyzed periods, 4 and 8 weeks (14 and 20 MPa), when compared with rough ones (4 and 13 MPa). These results suggest that porous implants improve the contact at the implant-bone interface and increase the fixation to the bone, improving the osseointegration. Thus, the porous implant might be an alternative to dental implant in less favorable conditions, and appear to be better fixed to bone, offering promising alternatives.

Relevância:

50.00% 50.00%

Publicador:

Resumo:

The implementation of vibration analysis techniques based on virtual instrumentation has spread increasingly in the academic and industrial branch, since the use of any software for this type of analysis brings good results at low cost. Among the existing software for programming and creation of virtual instruments, the LabVIEW was chosen for this project. This software has good interface with the method of graphical programming. In this project, it was developed a system of rotating machine condition monitoring. This monitoring system is applied in a test stand, simulating large scale applications, such as in hydroelectric, nuclear and oil exploration companies. It was initially used a test stand, where an instrumentation for data acquisition was inserted, composed of accelerometers and inductive proximity sensors. The data collection system was structured on the basis of an NI 6008 A/D converter of National Instruments. An electronic circuit command was developed through the A/D converter for a remote firing of the test stand. The equipment monitoring is performed through the data collected from the sensors. The vibration signals collected by accelerometers are processed in the time domain and frequency. Also, proximity probes were used for the axis orbit evaluation and an inductive sensor for the rotation and trigger measurement. © (2013) Trans Tech Publications, Switzerland.

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC

Relevância:

50.00% 50.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)