837 resultados para Design Review
Resumo:
This review looks at the work carried out over the past 15 years on membrane distillation and reports the conditions utilized for research. The process is still used mainly at the laboratory scale, but a few pilot plants have been built across the world, mostly for desalination and the production of potable water. Studies into membrane distillation have been concerned with the effect of mass transfer, heat transfer, and stirring rate, but the most important effect that has to be considered with this process is temperature polarization. A section on temperature polarization and the effect of boundary layers is included in this review.
Resumo:
Letter identification is a critical front end of the reading process. In general, conceptualizations of the identification process have emphasized arbitrary sets of distinctive features. However, a richer view of letter processing incorporates principles from the field of type design, including an emphasis on uniformities across letters within a font. The importance of uniformities is supported by a small body of research indicating that consistency of font increases letter identification efficiency. We review design concepts and the relevant literature, with the goal of stimulating further thinking about letter processing during reading.
Resumo:
This paper describes a simplified dynamic thermal model which simulates the energy and overheating performance of windows. To calculate artificial energy use within a room, the model employs the average illuminance method, which takes into account the daylight energy impacting upon the room by the use of hourly climate data. This tool describes the main thermal performance ( heating, cooling and overheating risk) resulting proposed a design of window. The inputs are fewer and simpler than that are required by complicated simulation programmes. The method is suited for the use of architects and engineers at the strategic phase of design, when little is available.
Resumo:
This paper follows the report on the “Quality of Urban Design: Study of the Influence of Private Property Decision Maker in Urban Design” (RICS 1996). It focuses on one of the findings in the report, namely that decisions made in development, investment and occupation seemed overly influenced by short term considerations. In this paper, the authors review the Report and examine the concept of short termism as it affects urban design decisions. The paper concludes that although it is difficult to establish whether or not short termism exists in many decisions, there are grounds for believing that a priori short termism might particularly influence property orientated decisions. The paper ends with some implications for policy both at the economy and local level.
Resumo:
This paper examines the realities of community involvement in urban design in the context of a study of the West Itchen Neighbourhood of Southampton, a diverse inner city area accommodating some 7,000 households and 18,000 people. The findings are based on a literature review of community involvement in urban design and case study research into three government supported regeneration projects all located within the study area: a Neighbourhood Renewal Area - designated in 1994; an Estate Action Scheme - implemented between 1993 and 1996; and a Single Regeneration Budget programme - following a successful bid in 1995. The research was undertaken by Helen Gregory in 1997/8 as the basis of a dissertation, supervised by Alan Rowley, submitted for the award of an MPhil in Environmental Planning and Development from The University of Reading.
Resumo:
This paper surveys numerical techniques for the regularization of descriptor (generalized state-space) systems by proportional and derivative feedback. We review generalizations of controllability and observability to descriptor systems along with definitions of regularity and index in terms of the Weierstraß canonical form. Three condensed forms display the controllability and observability properties of a descriptor system. The condensed forms are obtained through orthogonal equivalence transformations and rank decisions, so they may be computed by numerically stable algorithms. In addition, the condensed forms display whether a descriptor system is regularizable, i.e., when the system pencil can be made to be regular by derivative and/or proportional output feedback, and, if so, what index can be achieved. Also included is a a new characterization of descriptor systems that can be made to be regular with index 1 by proportional and derivative output feedback.
Resumo:
In this paper, the global market potential of solar thermal, photovoltaic (PV) and combined photovoltaic/thermal (PV/T) technologies in current time and near future was discussed. The concept of the PV/T and the theory behind the PV/T operation were briefly introduced, and standards for evaluating technical, economic and environmental performance of the PV/T systems were addressed. A comprehensive literature review into R&D works and practical application of the PV/T technology was illustrated and the review results were critically analysed in terms of PV/T type and research methodology used. The major features, current status, research focuses and existing difficulties/barriers related to the various types of PV/T were identified. The research methods, including theoretical analyses and computer simulation, experimental and combined experimental/theoretical investigation, demonstration and feasibility study, as well as economic and environmental analyses, applied into the PV/T technology were individually discussed, and the achievement and problems remaining in each research method category were described. Finally, opportunities for further work to carry on PV/T study were identified. The review research indicated that air/water-based PV/T systems are the commonly used technologies but their thermal removal effectiveness is lower. Refrigerant/heat-pipe-based PV/Ts, although still in research/laboratory stage, could achieve much higher solar conversion efficiencies over the air/water-based systems. However, these systems were found a few technical challenges in practice which require further resolutions. The review research suggested that further works could be undertaken to (1) develop new feasible, economic and energy efficient PV/T systems; (2) optimise the structural/geometrical configurations of the existing PV/T systems; (3) study long term dynamic performance of the PV/T systems; (4) demonstrate the PV/T systems in real buildings and conduct the feasibility study; and (5) carry on advanced economic and environmental analyses. This review research helps finding the questions remaining in PV/T technology, identify new research topics/directions to further improve the performance of the PV/T, remove the barriers in PV/T practical application, establish the standards/regulations related to PV/T design and installation, and promote its market penetration throughout the world.
Resumo:
The research will explore views on inclusive design policy implementation and learning strategy used in practice by Local Authorities’ planning, building control and policy departments in England. It reports emerging research findings. The research aim was developed from an extensive literature review, and informed by a pilot study with relevant Local Authority departments. The pilot study highlighted gaps within the process of policy implementation, a lack of awareness of the process and flaws in the design guidance policy. This has helped inform the development of a robust research design using both a survey and semi-structured interviews. The questionnaire targeted key employees within Local Authorities designed to establish how employees learn about inclusive design policy and to determine their views on current approaches of inclusive design policy implementation adopted by their Local Authorities. The questionnaire produces 117 responses. Interestingly approximately 9 out of 129 Local Authorities approached claimed that they were unable to participate either because an inclusive design policy was not adopted or they were faced with a high workload and thus unable to take part. An emerging finding is a lack of understanding of inclusive design problems, which may lead to problem with inclusive design policy implementation, and thus adversely affect how the built environment can be experienced. There is a strong indication from the survey respondents indicating that they are most likely to learn about inclusive design from policy guides produced by their Local Authorities and from their colleagues.
Resumo:
Flavonoids are low-molecular weight, aromatic compounds derived from fruits, vegetables, and other plant components. The consumption of these phytochemicals has been reported to be associated with reduced cardiovascular disease (CVD) risk, attributed to their anti-inflammatory, anti-proliferative, and anti-thrombotic actions. Flavonoids exert these effects by a number of mechanisms which include attenuation of kinase activity mediated at the cell-receptor level and/or within cells, and are characterized as broad-spectrum kinase inhibitors. Therefore, flavonoid therapy for CVD is potentially complex; the use of these compounds as molecular templates for the design of selective and potent small-molecule inhibitors may be a simpler approach to treat this condition. Flavonoids as templates for drug design are, however, poorly exploited despite the development of analogues based on the flavonol, isoflavonone, and isoflavanone subgroups. Further exploitation of this family of compounds is warranted due to a structural diversity that presents great scope for creating novel kinase inhibitors. The use of computational methodologies to define the flavonoid pharmacophore together with biological investigations of their effects on kinase activity, in appropriate cellular systems, is the current approach to characterize key structural features that will inform drug design. This focussed review highlights the potential of flavonoids to guide the design of clinically safer, more selective, and potent small-molecule inhibitors of cell signalling, applicable to anti-platelet therapy.
Resumo:
Objective To determine the prevalence and nature of prescribing and monitoring errors in general practices in England. Design Retrospective case note review of unique medication items prescribed over a 12 month period to a 2% random sample of patients. Mixed effects logistic regression was used to analyse the data. Setting Fifteen general practices across three primary care trusts in England. Data sources Examination of 6048 unique prescription items prescribed over the previous 12 months for 1777 patients. Main outcome measures Prevalence of prescribing and monitoring errors, and severity of errors, using validated definitions. Results Prescribing and/or monitoring errors were detected in 4.9% (296/6048) of all prescription items (95% confidence interval 4.4 - 5.5%). The vast majority of errors were of mild to moderate severity, with 0.2% (11/6048) of items having a severe error. After adjusting for covariates, patient-related factors associated with an increased risk of prescribing and/or monitoring errors were: age less than 15 (Odds Ratio (OR) 1.87, 1.19 to 2.94, p=0.006) or greater than 64 years (OR 1.68, 1.04 to 2.73, p=0.035), and higher numbers of unique medication items prescribed (OR 1.16, 1.12 to 1.19, p<0.001). Conclusion Prescribing and monitoring errors are common in English general practice, although severe errors are unusual. Many factors increase the risk of error. Having identified the most common and important errors, and the factors associated with these, strategies to prevent future errors should be developed based on the study findings.
Resumo:
Abstract Objective: To systematically review the available evidence on whether national or international agricultural policies that directly affect the price of food influence the prevalence rates of undernutrition or nutrition-related chronic disease in children and adults. Design: Systematic review. Setting: Global. Search strategy: We systematically searched five databases for published literature (MEDLINE, EconLit, Agricola, AgEcon Search, Scopus) and systematically browsed other databases and relevant organisational websites for unpublished literature. Reference lists of included publications were hand-searched for additional relevant studies. We included studies that evaluated or simulated the effects of national or international food-price-related agricultural policies on nutrition outcomes reporting data collected after 1990 and published in English. Primary and secondary outcomes: Prevalence rates of undernutrition (measured with anthropometry or clinical deficiencies) and overnutrition (obesity and nutrition-related chronic diseases including cancer, heart disease and diabetes). Results: We identified a total of four relevant reports; two ex post evaluations and two ex ante simulations. A study from India reported on the undernutrition rates in children, and the other three studies from Egypt, the Netherlands and the USA reported on the nutrition related chronic disease outcomes in adults. Two of the studies assessed the impact of policies that subsidised the price of agricultural outputs and two focused on public food distribution policies. The limited evidence base provided some support for the notion that agricultural policies that change the prices of foods at a national level can have an effect on population-level nutrition and health outcomes. Conclusions: A systematic review of the available literature suggests that there is a paucity of robust direct evidence on the impact of agricultural price policies on nutrition and health.
Resumo:
Companies are becoming increasingly dependent on the productivity of their knowledge workers in comparison to manual workers (Ramírez and Nembhard 2004, p.602). Practitioners, researchers or commentators do not consistently conceptualize design (Love 2000, p.295; Pugh 1990, p.65). There is a need to not only rethink design processes and practices but also to re-consider design conceptualization that underpins processes and practices. The aim is to develop a clear understanding of design as conceptualized in the literatures from construction design, design management, design productivity, design practices and the process of design. The objective is to review how researchers have conceptualized design.
Resumo:
Parental behaviours have been implicated in the development and maintenance of anxiety in children and young people; however the degree to which findings apply to adolescents specifically remains unclear. We conducted a systematic review of studies examining the evidence for an association between parental behaviours and adolescent anxiety. Twenty two studies were identified. The results of this systematic review provide fairly consistent preliminary evidence for an association between anxiety and perceived parental control and anxious rearing in adolescence. The findings relating to an association between adolescent anxiety and perceived parental rejection and lack of warmth are somewhat less consistent. Methodological shortcomings in the studies mean that these results should be interpreted with caution. Future research should be conducted using observational and experimental design with adolescents from referred, clinical populations to help identify the critical parental processes and clarify the direction of effects.
Resumo:
The modern built environment has become more complex in terms of building types, environmental systems and use profiles. This complexity causes difficulties in terms of optimising buildings energy design. In this circumstance, introducing a set of prototype reference buildings, or so called benchmark buildings, that are able to represent all or majority parts of the UK building stock may be useful for the examination of the impact of national energy policies on building energy consumption. This study proposes a set of reference office buildings for England and Wales based on the information collected from the Non-Domestic Building Stock (NDBS) project and an intensive review of the existing building benchmarks. The proposed building benchmark comprises 10 prototypical reference buildings, which in relation to built form and size, represent 95% of office buildings in England and Wales. This building benchmark provides a platform for those involved in building energy simulations to evaluate energy-efficiency measures and for policy-makers to assess the influence of different building energy policies.