New integrated multilevel converter for switched reluctance motor drives in plug-in hybrid electric vehicles with flexible energy conversion

This paper presents an integrated multilevel converter of switched reluctance motors (SRMs) fed by a modular front-end circuit for plug-in hybrid electric vehicle (PHEV) applications. Several operating modes can be achieved by changing the on-off states of the switches in the front-end circuit. In generator driving mode, the battery bank is employed to elevate the phase voltage for fast excitation and demagnetization. In battery driving mode, the converter is reconfigured as a four-level converter, and the capacitor is used as an additional charge capacitor to produce multilevel voltage outputs, which enhances the torque capability. The operating modes of the proposed drive are explained and the phase current and voltage are analyzed in details. The battery charging is naturally achieved by the demagnetization current in motoring mode and by the regenerative current in braking mode. Moreover, the battery can be charged by the external AC source or generator through the proposed converter when the vehicle is in standstill condition. The SRM-based PHEV can operate at different speeds by coordinating the power flow between the generator and battery. Simulation in MATLAB/Simulink and experiments on a three-phase 12/8 SRM confirm the effectiveness of the proposed converter topology.

High frequency electric machine models for the evaluation of operational impacts in integrated drives

A high frequency physical phase variable electric machine model was developed using FE analysis. The model was implemented in a machine drive environment with hardware-in-the-loop. The novelty of the proposed model is that it is derived based on the actual geometrical and other physical information of the motor, considering each individual turn in the winding. This is the first attempt to develop such a model to obtain high frequency machine parameters without resorting to expensive experimental procedures currently in use. The model was used in a dynamic simulation environment to predict inverter-motor interaction. This includes motor terminal overvoltage, current spikes, as well as switching effects. In addition, a complete drive model was developed for electromagnetic interference (EMI) analysis and evaluation. This consists of the lumped parameter models of different system components, such as cable, inverter, and motor. The lumped parameter models enable faster simulations. The results obtained were verified by experimental measurements and excellent agreements were obtained. A change in the winding arrangement and its influence on the motor high frequency behavior has also been investigated. This was shown to have a little effect on the parameter values and in the motor high frequency behavior for equal number of turns. An accurate prediction of overvoltage and EMI in the design stages of the drive system would reduce the time required for the design modifications as well as for the evaluation of EMC compliance issues. The model can be utilized in the design optimization and insulation selection for motors. Use of this procedure could prove economical, as it would help designers develop and test new motor designs for the evaluation of operational impacts in various motor drive applications.

Stream drying drives microbial ammonia oxidation and first-flush nitrate export

Funded by Spanish National Research Council (CSIC). Grant Number: CGL2012-32747 MINECO. Grant Numbers: CGL2012-32747, CGL2011-30590-CO2-02 EU Commission. Grant Number: 244121 FP7

Schéma implicite pour la résolution d'un système hyperbolique d'équations aux dérivées partielles

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Identification des métalloprotéases de la matrice extracellulaire synthétisées et sécrétées par des cellules dérivées de la lignée MDCK, les cellules MSV-MDCK-INV aux propriétés tumorales et invasives

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Antigen Drives Regulatory B10 Cell Development and Function

B cells mediate immune responses via the secretion of antibody and interactions with other immune cell populations through antigen presentation, costimulation, and cytokine secretion. Although B cells are primarily believed to promote immune responses using the mechanisms described above, some unique regulatory B cell populations that negatively influence inflammation have also been described. Among these is a rare interleukin (IL)-10-producing B lymphocyte subset termed “B10 cells.” B cell-derived IL-10 can inhibit various arms of the immune system, including polarization of Th1/Th2 cell subsets, antigen presentation and cytokine production by monocytes and macrophages, and activation of regulatory T cells. Further studies in numerous autoimmune and inflammatory models of disease have confirmed the ability of B10 cells to negatively regulate inflammation in an IL-10-dependent manner. Although IL-10 is indispensable to the effector functions of B10 cells, how this specialized B cell population is selected in vivo to produce IL-10 is unknown. Some studies have demonstrated a link between B cell receptor (BCR)-derived signals and the acquisition of IL-10 competence. Additionally, whether antigen-BCR interactions are required for B cell IL-10 production during homeostasis as well as active immune responses is a matter of debate. Therefore, the goal of this thesis is to determine the importance of antigen-driven signals during B10 cell development in vivo and during B10 cell-mediated immunosuppression.

Chapter 3 of the dissertation explored the BCR repertoire of spleen and peritoneal cavity B10 cells using single-cell sequencing to lay the foundation for studies to understand the full range of antigens that may be involved in B10 cell selection. In both the spleen and peritoneal cavity B10 cells studied, BCR gene utilization was diverse, and the expressed BCR transcripts were largely unmutated. Thus, B10 cells are likely capable of responding to a wide range of foreign and self-antigens in vivo.

Studies in Chapter 4 determined the predominant antigens that drive B cell IL-10 secretion during homeostasis. A novel in vitro B cell expansion system was used to isolate B cells actively expressing IL-10 in vivo and probe the reactivities of their secreted monoclonal antibodies. B10 cells were found to produce polyreactive antibodies that bound multiple self-antigens. Therefore, in the absence of overarching active immune responses, B cell IL-10 is secreted following interactions with self-antigens.

Chapter 5 of this dissertation investigated whether foreign antigens are capable of driving B10 cell expansion and effector activity during an active immune response. In a model of contact-induced hypersensitivity, in vitro B cell expansion was again used to isolate antigen-specific B10 clones, which were required for optimal immunosuppression.

The studies described in this dissertation shed light on the relative contributions of BCR-derived signals during B10 cell development and effector function. Furthermore, these investigations demonstrate that B10 cells respond to both foreign and self-antigens, which has important implications for the potential manipulation of B10 cells for human therapy. Therefore, B10 cells represent a polyreactive B cell population that provides antigen-specific regulation of immune responses via the production of IL-10.

Schéma implicite pour la résolution d'un système hyperbolique d'équations aux dérivées partielles

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Identification des métalloprotéases de la matrice extracellulaire synthétisées et sécrétées par des cellules dérivées de la lignée MDCK, les cellules MSV-MDCK-INV aux propriétés tumorales et invasives

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Caractérisation de l'impact des conditions opératoires sur l'efficience d'un procédé de concentration du lait par ultrafiltration

Les concentrés de protéines de lait sont couramment utilisés comme ingrédients lors de la standardisation du lait de fromagerie. La concentration des protéines est généralement réalisée par ultrafiltration (UF) à l’aide de membranes polymériques ayant un seuil de coupure de 10 kDa, et ce, jusqu’à un facteur de concentration volumique de 3.5X. Dans l’optique d’améliorer l’efficience du procédé d’UF, l’étude avait pour but de caractériser l’impact du mode opératoire (pression transmembranaire constante (465 et 672 kPa) et flux constant) ainsi que la température (10°C et 50°C) sur la performance du système jusqu’à un facteur de concentration volumique de 3.6X. Le module de filtration à l’échelle pilote comprenait une membrane d’UF en polyéthersulfone de 10 kDa d’une surface de 2,04 m2. La performance du système a été caractérisée sur le flux de perméation, la sélectivité et la consommation énergétique totale. L’étude a montré que le flux de perméation était 1,9 fois plus élevé à une température de 50°C comparativement à 10°C lors de l’UF du lait. Le coefficient de rejet des protéines n’a pas été affecté significativement par la pression transmembranaire et la température (P< 0,05). L’effet de la température a été observé au niveau de la teneur en calcium, laquelle était plus élevée de 12% dans les rétentats générés à 50C. La consommation énergétique totale du système d’UF était plus élevée à 10C comparativement à 50C, représentant 0,32±0,02 et 0,26±0,04 kWh/kg rétentat respectivement. Les résultats montrent que le ratio d’efficience énergétique (rapport entre le flux de perméation et la consommation énergétique) optimal a été obtenu à faible pression transmembranaire constante et à 50C. L’approche développée dans le cadre de ce projet fournira des outils aux industriels laitiers pour améliorer l’éco-efficience de leurs procédés de séparation baromembranaire.

What Drives Parental Concerns about their 18-Month-Olds at Familial Risk for Autism Spectrum Disorder?

Thesis (Master's)--University of Washington, 2016-08

Comparative performance analysis of drives for induction motors

The asynchronous polyphase induction motor has been the motor of choice in industrial settings for about the past half century because power electronics can be used to control its output behavior. Before that, the dc motor was widely used because of its easy speed and torque controllability. The two main reasons why this might be are its ruggedness and low cost. The induction motor is a rugged machine because it is brushless and has fewer internal parts that need maintenance or replacement. This makes it low cost in comparison to other motors, such as the dc motor. Because of these facts, the induction motor and drive system have been gaining market share in industry and even in alternative applications such as hybrid electric vehicles and electric vehicles. The subject of this thesis is to ascertain various control algorithms’ advantages and disadvantages and give recommendations for their use under certain conditions and in distinct applications. Four drives will be compared as fairly as possible by comparing their parameter sensitivities, dynamic responses, and steady-state errors. Different switching techniques are used to show that the motor drive is separate from the switching scheme; changing the switching scheme produces entirely different responses for each motor drive.

Understanding what drives informal learning at work: A resource-based view.

The resource-based view identifies a number of factors that may influence employees’ informal learning. In a cross-sectional survey of 113 German employees in the energy sector, we examined a number of potential predictors of informal learning and a more positive informal learning attitude. The results showed that proactive help-seeking and professional self-efficacy were positive predictors of informal learning. Employees who were older, who enjoyed learning, sought help and were self-efficacious learners had a more positive attitude towards formal learning. Employees who had a more positive attitude about informal learning rated organisational learning provisions as less important, potentially due to being proactive help-seekers. Managers rated organisational learning resources as less important than non-managerial employees. However, managers also reported higher professional self-efficacy. These circumstances may also influence their decision-making regarding the need to provide learning resources to others in the workplace.

Validation d’un procédé automatisé d’extraction sur phase solide de glandes digestives de moules pour l’identification et la quantification des dinophysistoxines en LC/ESI/SM2 par piégeage d’ions quadripolaire

This report presents a new extraction method of the dinophysistoxins (DTXs), confirmed by quantification using high-performance liquid chromatography coupled to mass spectrometry with an ion trap and electro spray interface (HPLC/ESI/MS2). The method originality consists on the adaptation of DTXs basic extraction procedure (liquid/ liquid) to a solid phase extraction (SPE) via a robotic station: ASPEC XLi The parameters of the automatization procedure were optimized to obtain the best DTXs recovery rate. These improvements were loaded with digestive gland mussel homogenat realized on a silica cartridge SPE, activated in hexane/chloroform (50:50), washed with hexane/chloroform (50:50) and extracted by an elution gradient (chloroform methanol (65:35) and methanol (100%)). This method was validated according to two normative referentials (linearity, detection quantification limits and accuracy…) : - The Guide of the Pharmacy industry: Analytical Validation, report of the commission SFSTP 1992 (French Corporation of the Sciences and Technical Pharmaceutical), - - The Procedure of validation of an alternative method in compare to a reference method. (AFNOR, 1998. NF V 03-110). Comparison with the classical liquid/liquid extraction and the automated method present clear advantages. In an analytical method the extraction is generally considered to be the most labor-intensive and error-prone step. This new procedure allowed us to increase throughput, to improve the reproducibility and to reduce the error risks due to the individual manual treatments.

Organisational cognitive neuroscience drives theoretical progress, or: the curious case of the straw man murder

In this critical essay, we respond to Lindebaum’s (2016) argument that neuroscientific methodologies and data have been accepted prematurely in proposing novel management theory. We acknowledge that building new management theories requires firm foundations. We also find his distinction between demand and supply side forces helpful as an analytical framework identifying the momentum for the contemporary production of management theory. Nevertheless, some of the arguments Lindebaum (2016) puts forward, on closer inspection, can be contested, especially those related to the supply side of organizational cognitive neuroscience (OCN) research: fMRI data, motherhood statements and ethical concerns. We put forward a more positive case for OCN methodologies and data, as well as clarifying exactly what OCN really means, and its consequences for the development of strong management theory.

Optimisation thermodynamique d’un procédé solaire utilisant un système de réfrigération à éjecto-compression pour la production du froid

L’objectif essentiel de cette thèse est de développer un système industriel de réfrigération ou de climatisation qui permet la conversion du potentiel de l’énergie solaire en production du froid. Ce système de réfrigération est basé sur la technologie de l’éjecto-compression qui propose la compression thermique comme alternative économique à la compression mécanique coûteuse. Le sous-système de réfrigération utilise un appareil statique fiable appelé éjecteur actionné seulement par la chaleur utile qui provient de l’énergie solaire. Il est combiné à une boucle solaire composée entre autres de capteurs solaires cylindro-paraboliques à concentration. Cette combinaison a pour objectif d’atteindre des efficacités énergétiques et exergétiques globales importantes. Le stockage thermique n’est pas considéré dans ce travail de thèse mais sera intégré au système dans des perspectives futures. En première étape, un nouveau modèle numérique et thermodynamique d’un éjecteur monophasique a été développé. Ce modèle de design applique les conditions d’entrée des fluides (pression, température et vitesse) et leur débit. Il suppose que le mélange se fait à pression constante et que l’écoulement est subsonique à l’entrée du diffuseur. Il utilise un fluide réel (R141b) et la pression de sortie est imposée. D’autre part, il intègre deux innovations importantes : il utilise l'efficacité polytropique constante (plutôt que des efficacités isentropiques constantes utilisées souvent dans la littérature) et n’impose pas une valeur fixe de l'efficacité du mélange, mais la détermine à partir des conditions d'écoulement calculées. L’efficacité polytropique constante est utilisée afin de quantifier les irréversibilités au cours des procédés d’accélérations et de décélération comme dans les turbomachines. La validation du modèle numérique de design a été effectuée à l’aide d’une étude expérimentale présente dans la littérature. La seconde étape a pour but de proposer un modèle numérique basé sur des données expérimentales de la littérature et compatible à TRNSYS et un autre modèle numérique EES destinés respectivement au capteur solaire cylindro-parabolique et au sous-système de réfrigération à éjecteur. En définitive et après avoir développé les modèles numériques et thermodynamiques, une autre étude a proposé un modèle pour le système de réfrigération solaire à éjecteur intégrant ceux de ses composantes. Plusieurs études paramétriques ont été entreprises afin d’évaluer les effets de certains paramètres (surchauffe du réfrigérant, débit calorifique du caloporteur et rayonnement solaire) sur sa performance. La méthodologie proposée est basée sur les lois de la thermodynamique classique et sur les relations de la thermodynamique aux dimensions finies. De nouvelles analyses exergétiques basées sur le concept de l’exergie de transit ont permis l'évaluation de deux indicateurs thermodynamiquement importants : l’exergie produite et l’exergie consommée dont le rapport exprime l’efficacité exergétique intrinsèque. Les résultats obtenus à partir des études appliquées à l’éjecteur et au système global montrent que le calcul traditionnel de l’efficacité exergétique selon Grassmann n’est désormais pas un critère pertinent pour l'évaluation de la performance thermodynamique des éjecteurs pour les systèmes de réfrigération.