Chemical composition of corn and sorghum grains cultivated in oxisol with different application methods and doses of zinc

A.P. Puga, R.M. Prado, B. Mattiuz, D.W. Vale, and I.M. Fonseca. 2013. Chemical composition of corn and sorghum grains cultivated in Oxisol according to different application methods and doses of zinc. Cien. Inv. Agr. 40(1):97-108. In general, tropical soils present low concentrations of zinc (Zn), and the deficiency of Zn is recognized as a world nutritional problem for cereal production and human beings. Therefore, the main goal of this study was to assess the effects of different methods of Zn application on the quality of corn and sorghum grains grown in Oxisol. Two experiments were set up in the experimental area of UNESP (campus of Jaboticabal, Brazil). The following nine treatments were applied: three doses of Zn by banded application (seed furrows), three doses of Zn by incorporation into soil (0-20 cm depth), foliar application, seed application, and control (no Zn applied). The treatments were arranged in randomized blocks with four replicates. The contents of Zn, carbohydrates and proteins were determined for corn and sorghum grains. Regardless of the method, Zn application promoted higher contents of this micronutrient in corn and sorghum grains. The banded application method of Zn in soil promoted greater contents of total carbohydrates, starch and protein in both cultures. The incorporation of Zn into the soil method provided higher contents of soluble carbohydrates in both corn and sorghum grains.

Influence of Nd:YAG Laser on the Bond Strength of Self-etching and Conventional Adhesive Systems to Dental Hard Tissues

Purpose: The aim of this study was to investigate the influence of Nd:YAG laser on the shear bond strength to enamel and dentin of total and self-etch adhesives when the laser was applied over the adhesives, before they were photopolymerized, in an attempt to create a new bonding layer by dentin-adhesive melting.Material and Methods: One-hundred twenty bovine incisors were ground to obtain flat surfaces. Specimens were divided into two substrate groups (n=60): substrate E (enamel) and substrate D (dentin). Each substrate group was subdivided into four groups (n=15), according to the surface treatment accomplished: X (Xeno III self-etching adhesive, control), XL (Xeno III + laser Nd:YAG irradiation at 140 mJ/10 Hz for 60 seconds + photopolymerization, experimental), S (acid etching + Single Bond conventional adhesive, Control), and SL (acid etching + Single Bond + laser Nd:YAG at 140 mJ/10 Hz for 60 seconds + photopolymerization, experimental). The bonding area was delimited with 3-mm-diameter adhesive tape for the bonding procedures. Cylinders of composite were fabricated on the bonding area using a Teflon matrix. The teeth were stored in water at 37 degrees C/48 h and submitted to shear testing at a crosshead speed of 0.5 mm/min in a universal testing machine. Results were analyzed with three-way analysis of variance (ANOVA; substrate, adhesive, and treatment) and Tukey tests (alpha=0.05). ANOVA revealed significant differences for the substrate, adhesive system, and type of treatment: lased or unlased (p<0.05). The mean shear bond strength values (MPa) for the enamel groups were X=20.2 +/- 5.61, XL=23.6 +/- 4.92, S=20.8 +/- 4.55, SL=22.1 +/- 5.14 and for the dentin groups were X=14.1 +/- 7.51, XL=22.2 +/- 6.45, S=11.2 +/- 5.77, SL=15.9 +/- 3.61. For dentin, Xeno III self-etch adhesive showed significantly higher shear bond strength compared with Single Bond total-etch adhesive; Nd:YAG laser irradiation showed significantly higher shear bond strength compared with control (unlased).Conclusion: Nd:YAG laser application prior to photopolymerization of adhesive systems significantly increased the bond strength to dentin.

Doses de nitrogênio em cobertura no feijoeiro em sucessão a gramíneas no cultivo de inverno-primavera

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

A comparative study of production performance and animal health practices in organic and conventional dairy systems

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Design and Characterization of Silicone and Surfactant Based Systems for Topical Drug Delivery

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

THREE TIME SCALE SINGULAR PERTURBATION PROBLEMS AND NONSMOOTH DYNAMICAL SYSTEMS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Apparent protein and energy digestibility and amino acid availability of corn and co-products in extruded diets for nile tilapia, oreochromis niloticus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Formulations of Melia azedarach to control diabrotica speciosa (germar) (coleoptera: chrysomelidae) larvae in corn and plant enhancement

We evaluated oil and powder formulations of Melia azedarach for controlling larvae of Diabrotica speciosa (Germar) in corn and plant enhancement. Five concentrations of each formulation were evaluated and compared to fipronil (negative control) and distilled water (positive control). After treatment, the number of surviving insects (larvae, pupae, and adults), the adult body weight, the sex ratio, and the longevity were recorded, while the height, dry weight of aerial part and roots, and number of leaves of plants were measured. The oil formulation at 4.0 mL reduced the larvae population of D. speciosa similarly to the insecticide fipronil, which resulted in greater height, dry weight of the root system, and number of leaves. Powder formulation at concentrations of 40, 80, and 160 mg caused larval mortality above 80%; however, these concentrations did not prevent reduction of plant height and dry weight of aerial part. Further studies assessing the residual period of M. azedarach control against D. speciosa larvae and its phytotoxicity, which are common traits associated with azadirachtin application, are necessary to subsidize the next steps of this alternative control strategy.

Weakly bound states of two- and three-boson systems in the crossover from two to three dimensions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Site and extent of amino acid digestion in dairy cattle fed with corn and its byproducts

The study was conducted to evaluated the site and extent of dry matter (DM), crude protein (CP), methionine (Met), lysine (Lys), and threonine (Thr) digestion of corn and byproducts obtained from corn germ mixed with different amounts of extruded or non-extruded ether extract (EE) in dairy cattle. Treatments consisted in eight types of feed and two processing in a 4 x 2 factorial design. There were four feeds: corn grain cracked (Corn), corn germ meal with 1% EE (CG1), corn germ meal with 7% EE (CG7), and corn germ meal with 10% EE (CG10). The feeds were processed in one of two ways: extruded (Ex) and not extruded. In situ techniques were used to determine DM, CP, Met, Lys, and Thr partial and total tract digestion. A basic diet was compounded of corn germ meal, soybean meal and coastcross hay in a 70: 30 roughage to concentrate ratio. There was no interaction (P>0.05) between feeds and processing method. Extrusion improved (P<0.05) total tract digestibility of corn DM but not CP. Intestinal digestibility was similar (P>0.05) for corn and corn germ meal mixed with 7 and 10% EE, regardless of EE processing method. The CP total tract digestibility of corn germ meal with 1% non-extruded EE was 16.62% higher (P<0.05) than that of the extruded form. The best total CP digestibility was obtained for corn germ meal with 7% EE, independently of the processing method. The effects of EE processing method on partial and total digestibility differed between amino acid. Corn and corn byproduct extrusion may improve dry matter digestibility, but do not necessarily influence crude protein digestion. Ruminal and intestinal digestibility of Met, Lys, and Thr depends on both feed type and processing method. Therefore, amino acid availability should be considered individually.

Entropic information for travelling solitons in Lorentz and CPT breaking systems

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Socio-eco-efficiency of integrated and non-integrated systems of crop, forestry and livestock in the Ipameri city, at brazilian Cerrado

Pós-graduação em Ciências Ambientais - Sorocaba

Editorial dynamics and control of aerospace and vertical transportation systems

This Special Issue presents a selection of papers initially presented at the 11th International Conference on Vibration Problems (ICOVP-2013), held from 9 to 12 September 2013 in Lisbon, Portugal. The main topics of this Special Issue are linear and, mainly, nonlinear dynamics, chaos and control of systems and structures and their applications in different field of science and engineering. According to the goal of the Special Issue, the selected contributions are divided into three major parts: “Vibration Problems in Vertical Transportation Systems”, “Nonlinear Dynamics, Chaos and Control of Elastic Structures” and “New Strategies and Challenges for Aerospace and Ocean Structures Dynamics and Control”.

RB30-245 Water Supply and Sewage Disposal Systems for Farm Homes

When the well "goes dry" or when the windmill or pump breaks down, every one in the household immediately appreciates the value fo plenty of water. In other words, "You never miss the water until the well runs dry." Fortunately, in most sections of this state, plenty of pure water may be obtained by sinking wells of moderate depth, yet surprisingly few farm homes are supplied with running water in the kitchen even though the barn yards are equipped with hydrants and tanks. It is the purpose of this bulletin to present a number of water supply and sewage disposal systems which have been used in Nebraska and surrounding states and which add greatly to the comfort and convenience of the farm home.