Researcher attitudes to data sharing : cultural change requires better motivations

While undertaking the ANDS RDA Gold Standard Record Exemplars project, research data sharing was discussed with many QUT researchers. Our experiences provided rich insight into researcher attitudes towards their data and the sharing of such data. Generally, we found traditional altruistic motivations for research data sharing did not inspire researchers, but an explanation of the more achievement-oriented benefits were more compelling.

Fast pyrolysis for better utilization of tamarind seed from renewable energy point of view

The conversion of tamarind seeds into pyrolytic oil by fixed bed fire-tube heating reactor has been taken into consideration in this study. The major components of the system were fixed bed fire-tube heating reactor, liquid condenser and collectors. The raw and crushed tamarind seed in particle form was pyrolized in an electrically heated 10 cm diameter and 27 cm high fixed bed reactor. The products are oil, char and gases. The parameters varied were reactor bed temperature, running time, gas flow rate and feed particle size. The parameters were found to influence the product yields significantly. The maximum liquid yield was 45 wt% at 4000C for a feed size of 1.07cm3 at a gas flow rate of 6 liter/min with a running time of 30 minute. The pyrolysis oil was obtained at these optimum process conditions were analyzed for physical and chemical properties to be used as an alternative fuel.

Traffic-related fine and ultrafine particle exposures of professional drivers and illness : An opportunity to better link exposure science and epidemiology to address an occupational hazard?

Exposures to traffic-related air pollution (TRAP) can be particularly high in transport microenvironments (i.e. in and around vehicles) despite the short durations typically spent there. There is a mounting body of evidence that suggests that this is especially true for fine (b2.5 μm) and ultrafine (b100 nm, UF) particles. Professional drivers, who spend extended periods of time in transport microenvironments due to their job, may incur exposures markedly higher than already elevated non-occupational exposures. Numerous epidemiological studies have shown a raised incidence of adverse health outcomes among professional drivers, and exposure to TRAP has been suggested as one of the possible causal factors. Despite this, data describing the range and determinants of occupational exposures to fine and UF particles are largely conspicuous in their absence. Such information could strengthen attempts to define the aetiology of professional drivers' illnesses as it relates to traffic combustion-derived particles. In this article, we suggest that the drivers' occupational fine and UF particle exposures are an exemplar case where opportunities exist to better link exposure science and epidemiology in addressing questions of causality. The nature of the hazard is first introduced, followed by an overview of the health effects attributable to exposures typical of transport microenvironments. Basic determinants of exposure and reduction strategies are also described, and finally the state of knowledge is briefly summarised along with an outline of the main unanswered questions in the topic area.

Towards a better understanding of fashion clothing involvement

This study is concerned with consumer involvement in fashion clothing. Amidst the consumer objects that facilitate everyday life, fashion clothing is an important and meaningful object for many consumers. In the extant consumer literature few studies have attempted to examine fashion clothing involvement, particularly in terms of its causes and outcomes. This study then focuses on building a reliable nomological network to bring a greater understanding to this facet of consumer behaviour. To achieve this, materialism and gender are examined as drivers of fashionclothinginvolvement. Recreational shopper identity, ongoing information search, market mavenism, and purchase decision involvement are explored as outcomes of fashion clothing involvement. Data were gathered using an Australian Generation Y sample resulting in 200 completed questionnaires. The results support the study’s model and its hypotheses and show that materialism and gender are significant drivers of fashion clothing involvement. While also, recreational shopper identity, ongoing information search, market mavenism and purchase decision involvement are significant outcomes of fashion clothing involvement.

Porno? Chic!: how pornography changed the world and made it a better place

Porno? Chic! examines the relationship between the proliferation of pornography and sexualised culture in the West and social and cultural trends which have advanced the rights of women and homosexuals. Brian McNair addresses this relationship with an analysis of trends in sexualised culture since 2002 linked to a transnational analysis of change in sexual politics and sex/gender relations in a range of societies, from the sexually liberalised societies of advanced capitalism to those in which women and homosexuals remain tightly controlled by authoritarian, patriarchal regimes. In this accessible, jargon-free book, Brian McNair examines why those societies in which sexualised culture is the most liberalised and pervasive are also those in which the socio-economic and political rights of women and homosexuals have advanced the most.

More is not necessarily better. A biomechanical study on distal screw numbers in volar locking distal radius plates

INTRODUCTION: Currently available volar locking plates for the treatment of distal radius fractures incorporate at least two distal screw rows for fixation of the metaphyseal fragment and have a variable-angle locking mechanism which allows placement of the screws in various directions There is, however no evidence that these plates translate into better outcomes or have superior biomechanical properties to first generation plates, which had a single distal screw row and fixed-angle locking. The aim of our biomechanical study was to compare fixed-angle single-row plates with variable-angle multi-row plates to clarify the optimal number of locking screws. MATERIALS AND METHODS: Five different plate-screw combinations of three different manufacturers were tested, each group consisting of five synthetic fourth generation distal radius bones. An AO type C2 fracture was created and the fractures were plated according to each manufacturer's recommendations. The specimens then underwent cyclic and load-to-failure testing. An optical motion analysis system was used to detect displacement of fragments. RESULTS: No significant differences were detected after cyclic loading as well as after load-to-failure testing, neither in regard to axial deformation, implant rigidity or maximum displacement. The fixed-angle single-row plate showed the highest pre-test rigidity, least increase in post-testing rigidity and highest load-to-failure rigidity and least radial shortening. The radial shortening of plates with two distal screw rows was 3.1 and 4.3 times higher, respectively, than that of the fixed-angle single-row plate. CONCLUSION: The results of our study indicate that two distal screw rows do not add to construct rigidity and resistance against loss of reduction. Well conducted clinical studies based on the findings of biomechanical studies are necessary to determine the optimal number of screws necessary to achieve reproducibly good results in the treatment of distal radius fractures.

Using neo-Piagetian theory, formative in-Class tests and think alouds to better understand student thinking : a preliminary report on computer programming

It is acknowledged around the world that many university students struggle with learning to program (McCracken et al., 2001; McGettrick et al., 2005). In this paper, we describe how we have developed a research programme to systematically study and incrementally improve our teaching. We have adopted a research programme with three elements: (1) a theory that provides an organising framework for defining the type of phenomena and data of interest, (2) data on how the class as a whole performs on formative assessment tasks that are framed from within the organising framework, and (3) data from one-on-one think aloud sessions, to establish why students struggle with some of those in-class formative assessment tasks. We teach introductory computer programming, but this three-element structure of our research is applicable to many areas of engineering education research.

Gene transfer vectors targeted to human prostate cancer : do we need better preclinical testing systems?

Destruction of cancer cells by genetically modified viral and nonviral vectors has been the aim of many research programs. The ability to target cytotoxic gene therapies to the cells of interest is an essential prerequisite, and the treatment has always had the potential to provide better and more long-lasting therapy than existing chemotherapies. However, the potency of these infectious agents requires effective testing systems, in which hypotheses can be explored both in vitro and in vivo before the establishment of clinical trials in humans. The real prospect of off-target effects should be eliminated in the preclinical stage, if current prejudices against such therapies are to be overcome. In this review we have set out, using adenoviral vectors as a commonly used example, to discuss some of the key parameters required to develop more effective testing, and to critically assess the current cellular models for the development and testing of prostate cancer biotherapy. Only by developing models that more closely mirror human tissues will we be able to translate literature publications into clinical trials and hence into acceptable alternative treatments for the most commonly diagnosed cancer in humans.

A study on the effects of routing symbol design on process model comprehension

Process modeling grammars are used to create models of business processes. In this paper, we discuss how different routing symbol designs affect an individual's ability to comprehend process models. We conduct an experiment with 154 students to ascertain which visual design principles influence process model comprehension. Our findings suggest that design principles related to perceptual discriminability and pop out improve comprehension accuracy. Furthermore, semantic transparency and aesthetic design of symbols lower the perceived difficulty of comprehension. Our results inform important principles about notational design of process modeling grammars and the effective use of process modeling in practice.

Brokering innovation to better leverage R&D investment

What is the contribution of innovation brokers in leveraging research and development (R&D) investment to enhance industry-wide capabilities? The case of the Australian Cooperative Research Centre for Construction Innovation (CRC CI) is considered in the context of motivating supply chain firms to improve their organizational capabilities in order to acquire, assimilate, transfer and exploit R&D outcomes to their advantage, and to create broader industry and national benefits. A previous audit and analysis has shown an increase in business R&D investment since 2001. The role of the CRC CI in contributing to growth in the absorptive capacity of the Australian construction industry as a whole is illustrated through two programmes: digital modelling building information modelling (BIM) and construction site safety. Numerous positive outcomes in productivity, quality, improved safety and competitiveness were achieved between 2001 and 2009.

Does fundamental indexation lead to better risk-adjusted returns? New evidence from Australian Securities Exchange

We investigate the claims of superiority of fundamental indexation strategy over capitalisation-weighted indexation by using data for Australian Securities Exchange (ASX) listed stocks. Whilst our results are in line with the outperformance observed in other geographical markets, we find that the excess returns from fundamental indexation in Australian market are much higher. On a rolling 5-year basis, the fundamental index always outperforms the capitalisation-weighted index. Our results suggest that superior performance of fundamental indexation could not be entirely attributed to value, size, or momentum effects. The outperformance persists even after adjusting for slightly higher transaction costs related to turnover.

‘Hot chicks’, ‘better parties’ or academic stuff : perceptions of a regional university campus using Repertory Grid Analysis and Importance-performance Analysis

In the increasingly competitive Australian tertiary education market, a consumer orientation is essential. This is particularly so for small regional campuses competing with larger universities in the state capitals. Campus management need to carefully monitor both the perceptions of prospective students within the catchment area, and the (dis)satisfaction levels of current students. This study reports the results of an exploratory investigation into the perceptions held of a regional campus, using two techniques that have arguably been underutilised in the education marketing literature. Repertory Grid Analysis, a technique developed almost fifty years ago, was used to identify attributes deemed salient to year 12 high school students at the time they were applying for university places. Importance-performance analysis (IPA), developed three decades ago, was then used to identify attributes that were determinant for a new cohort of first year undergraduate students. The paper concludes that group applications of Repertory Grid offer education market researchers a useful means for identifying attributes used by high school students to differentiate universities, and that IPA is a useful technique for guiding promotional decision making. In this case, the two techniques provided a quick, economical and effective snapshot of market perceptions, which can be used as a foundation for the development of an ongoing market research programme.

Pursuing better childhoods and futures through curriculum : utopian visions in the development of Australia’s early years learning framework

In recent years, globalised curriculum discourses have given rise to local curriculum texts that convey and produce particularised imaginings and narratives, as well as hopes for, and expectations of, young children, their childhoods and their futures. In this article, the authors employ concepts from utopian studies and Deleuzeguattarian concepts of assemblage, rhizomes and lines (supple, rigid and lines of flight) to undertake a preliminary and partial rhizomatic mapping of utopian visions of better childhoods and futures evident in the development of the Early Years Learning Framework, Australia’s first national curriculum for early childhood settings. Drawing on the perspective of policy makers, News Corporation, the public, politicians, academics and practitioners who shaped the development of the Framework, the authors seek alternatives to the well-rehearsed dichotomies that so often characterise and confine curriculum politics and debates, and ways of exploring spaces between the possible and not (yet) possible.

Investing for impact : Constructing a better built environment

This publication, Investing for Impact, is a key outcome of Project 2.7 Leveraging R&D Investment for the Australian Built Environment. This information will be included in a more comprehensive book being prepared for publication in 2014 (Taylor and Francis). It draws together research findings and case studies from CIB Task Group 85 members from across the globe, highlighting their diversity and similarities. The evaluation of international case studies on the role and impact of R&D on national development has allowed us to demonstrate examples from different sectors of the built environment of R&D investment models that provide return on investment and other benefits for companies, governments and the general community.