Numerical analysis of the modal coupling at low resonances in a Colombian Andean Bandola in C using the finite element method

The work presented in this thesis is concerned with the dynamical behavior of a CBandola's acoustical box at low resonances -- Two models consisting of two and three coupled oscillators are proposed in order to analyse the response at the first two and three resonances, respectively -- These models describe the first resonances in a bandola as a combination of the lowest modes of vibration of enclosed air, top and back plates -- Physically, the coupling between these elements is caused by the fluid-structure interaction that gives rise to coupled modes of vibration for the assembled resonance box -- In this sense, the coupling in the models is expressed in terms of the ratio of effective areas and masses of the elements which is an useful parameter to control the coupling -- Numerical models are developed for the analysis of modal coupling which is performed using the Finite Element Method -- First, it is analysed the modal behavior of separate elements: enclosed air, top plate and back plate -- This step is important to identify participating modes in the coupling -- Then, a numerical model of the resonance box is used to compute the coupled modes -- The computation of normal modes of vibration was executed in the frequency range of 0-800Hz -- Although the introduced models of coupled oscillators only predict maximum the first three resonances, they also allow to study qualitatively the coupling between the rest of the computed modes in the range -- Considering that dynamic response of a structure can be described in terms of the modal parameters, this work represents, in a good approach, the basic behavior of a CBandola, although experimental measurements are suggested as further work to verify the obtained results and get more information about some characteristics of the coupled modes, for instance, the phase of vibration of the air mode and the radiation e ciency

A visual and contextual comparative study of the work of Picasso and Chanel towards an understanding of the overlaps between Modern Art and Fashion.

From the beginning of the twentieth century, ``Modernism`` impacted and transformed art and clothing. Pablo Picasso and Gabrielle ``Coco`` Chanel were two of the most central characters in Modernism working simultaneously in their disciplines. Picasso`s innovations, particularly in abstract art and Chanel`s fashion designs, that dramatically departed from the previous corseted and highly deco-rative styles, were so significant that they have left an influence on contemporary art and fashion. This study will compare their visual works and documented evidence of their motivations, within the context of their cultural backgrounds, to reveal meaning in the occurrences of overlaps. This approach has ex-amined the historical, cultural background of the artist and designer`s environment from different per-spectives, adding to previous research in this area. Through this research, outcomes of the analysis have shown similarities and divergences in the wider genres of art and fashion and the practice of the artist and fashion designer. The reference list to this text, used in the survey, gives a comprehensive overview of pertinent publications disseminating Picasso and Chanel`s visual works, oral perspectives and cultural impact.

Analysis of the entrepreneurial profile of students attending higher education in Portugal: the Carland Entrepreneurship Index application

Background The societal changes have created new necessities in terms of health care and of professionals with diverse skills. The institutions of higher education should promote the development of an entrepreneurial profile in students which may boost the exploration of new opportunities. Objectives: To identify the entrepreneurial profile in the students in higher education and its relationship to some personal characteristics and training. Methods Correlational quantitative study, accomplished with 1,604 students from 18 institutions of polytechnic Institutes of Portugal. The collection of data occurred between July and November/2015. The Carland Entrepreneurship Index (CEI) entrepreneurial skills questionnaire was applied, along with the acquisition of socio-demographic variables of the students. Data was analysed with the SPSS 23.0. The study followed the ethical requirements. Results The (CEI) application, allowed us to note that 75.7 % of the students presented an entrepreneurial profile, 20.8 % a Micro entrepreneurial profile and 3.4 % a Macro entrepreneurial. Additionally, we verified that older students (r = 0.193, p < = 0.000), of the male gender (Female = 0.55; Male, M= 0.580 p < 0.000), that had already worked or would like to work for others, showed the greatest entrepreneurial potential (Yes M= 0.60; No 0.54; p < 0.000), along with those who participated in entrepreneurial contents during their training (Did not participate M= 0.53; Participated 0.58; p < 0.000). Conclusions The entrepreneurial profile is related with some social demographic characteristics of the students; however, the educational institutions may have a preponderant role in the development of that profile, which may contribute to a greater contribution in the wellbeing of the populations.

Petr Eben's oratorio Apologia Sokratus (1967) and ballet Curses and Blessings (1983): An interpretative analysis of the symbolism behind the text settings and musical style

The Czech composer Petr Eben (1927-2007) has written music in all genres except symphony, but he is highly recognized for his organ and choral compositions, which are his preferred genres. His vocal works include choral songs and vocal-instrumental works at a wide range of difficulty levels, from simple pedagogical songs to very advanced and technically challenging compositions. This study examines two of Eben‘s vocal-instrumental compositions. The oratorio Apologia Sokratus (1967) is a three-movement work; its libretto is based on Plato‘s Apology of Socrates. The ballet Curses and Blessings (1983) has a libretto compiled from numerous texts from the thirteenth to the twentieth centuries. The formal design of the ballet is unusual—a three-movement composition where the first is choral, the second is orchestral, and the third combines the previous two played simultaneously. Eben assembled the libretti for both compositions and they both address the contrasting sides of the human soul, evil and good, and the everlasting fight between them. This unity and contrast is the philosophical foundation for both compositions. The dissertation discusses the multileveled meanings behind the text settings and musical style of the oratorio and ballet in analyses focusing on the text, melodic and harmonic construction, and symbolism. Additional brief analyses of other vocal and vocal-instrumental compositions by Eben establish the ground for the examination of the oratorio and ballet and for understanding features of the composer‘s musical style. While the oratorio Apologia Sokratus was discussed in short articles in the 1970s, the ballet Curses and Blessings has never previously been addressed within Eben scholarship. The dissertation examines the significant features of Eben‘s music. His melodic style incorporates influences as diverse as Gregorian chant and folk tunes on the one hand, and modern vocal techniques such as Sprechgesang and vocal aleatoricism on the other. His harmonic language includes bitonality and polytonality, used to augment the tonal legacy of earlier times, together with elements of pitch collections and limited serial procedures as well as various secundal and quartal harmonic sonorities derived from them. His music features the vibrant rhythms of folk music, and incorporates other folk devices like ostinato, repetitive patterns, and improvisation.

Comprehensive economic and financial analysis of the enterprise activity: approaches, methods and implementation

This thesis intends to analyse the performance and the efficiency of companies and to identify the key factors that may explain it. A comprehensive analysis based on a set of economic and financial ratios was studied as an instrument which provides information on enterprise performance and its efficiency. It was selected a sample with 15 enterprises: 7 Portuguese and 8 Ukrainian ones, belonging to several industries. Financial and non-financial data was collected for 6 years, during the period of 2009 to 2014. Research questions that guided this work were: Are the enterprises efficient/profitable? What factors influence enterprises’ efficiency/performance? Is there any difference between Ukrainian and Portuguese enterprises’ efficiency/performance, which factors have more influence? Which industrial sector is represented by more efficient/profitable enterprises? The main results showed that in average enterprises were efficient; comparing by states Ukrainian enterprises are more efficient; industries have similar level of efficiency. Among factors that influence ATR positively are fixed and current assets turnover ratios, ROA; negatively influencing are EBITDA margin and liquidity ratio. There is no significant difference between models by country. Concerning profitability, enterprises have low performance level but in comparison of countries Ukrainian enterprises have better profitability in average. Regarding the industry sector, paper industry is the most profitable. Among factors influencing ROA are profit margin, fixed asset turnover ratio, EBITDA margin, Debt to equity ratio and the country. In case of profitability both countries have different models. For Ukrainian enterprises is suggested to pay attention on factors of Short-term debt to total debt, ROA, Interest coverage ratio in order to be more efficient; Profit margin and EBITDA margin to make their performance better. For Portuguese enterprises for improving efficiency the observation and improvement of fixed assets turnover ratio, current assets turnover ratio, Short-term financial debt to total debt, Leverage Ratio, EBITDA margin is suggested; for improving higher profitability track fixed assets turnover ratio, current assets turnover ratio, Debt to equity ratio, Profit margin and Interest coverage ratio is suggested.

Analysis of the isomerism effect on the mutual solubilities of bis(trifluoromethylsulfonyl)imide-based ionic liquids with water

The knowledge of the liquid-liquid equilibria (LLE) between ionic liquids (ILs) and water is of utmost importance for environmental monitoring, process design and optimization. Therefore, in this work, the mutual solubilities with water, for the ILs combining the 1-methylimidazolium, [C(1)im](+); 1-ethylimidazolium, [C(2)im](+); 1-ethyl-3-propylimidazolium, [C(2)C(3)im](+); and 1-butyl-2,3-dimethylimidazolium, [C(4)C(1)C(1)im](+) cations with the bis(trifluoromethylsulfonyl)imide anion, were determined and compared with the isomers of the symmetric 1,3-dialkylimidazolium bis(trifluoromethylsulfonyl)imide ([C(n)C(n)im][NTf2], with n=1-3) and of the asymmetric 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C(n)C(1)im][NTf2], with n = 2-5) series of ILs. The results obtained provide a broad picture of the impact of the IL cation structural isomerism, including the number of alkyl side chains at the cation, on the water-IL mutual solubilities. Despite the hydrophobic behaviour associated to the [NTf2](-) anion, the results show a significant solubility of water in the IL-rich phase, while the solubility of ILs in the water-rich phase is much lower. The thermodynamic properties of solution indicate that the solubility of ILs in water is entropically driven and highly influenced by the cation size. Using the results obtained here in addition to literature data, a correlation between the solubility of [NTf2]-based ILs in water and their molar volume, for a large range of cations, is proposed. The COnductor like Screening MOdel for Real Solvents (COSMO-RS) was also used to estimate the LLE of the investigated systems and proved to be a useful predictive tool for the a priori screening of ILs aiming at finding suitable candidates before extensive experimental measurements.

Bioorthogonal Noncanonical Amino Acid Tagging for Selective Analysis of the Pseudomonas aeruginosa Proteome

In natural environments, bacterial physiology is frequently characterized by slow metabolic rates and complex cellular heterogeneities. The opportunistic pathogen Pseudomonas aeruginosa provides one such example; P. aeruginosa forms untreatable chronic biofilm infections of the cystic fibrosis lung, where oxygen limitation can lead to states of metabolic dormancy. To better understand the biology of these states, in vitro experiments must be adapted to better recapitulate natural settings. However, low rates of protein turnover and cellular or phenotypic complexity make these systems difficult to study using established methods. Here we adapt the bioorthogonal noncanonical amino acid tagging (BONCAT) method for time- and cell-selective proteomic analysis to the study of P. aeruginosa. Analysis of proteins synthesized in an anoxic dormancy state led to the discovery of a new type of transcriptional regulator which we designated SutA. We performed detailed analyses of SutA’s role in transcription under slow growth states and we elucidated the structural basis for its regulatory behavior. Additionally, we used cell-selective targeting of BONCAT labeling to measure the dynamic proteomic response of an antibiotic-tolerant biofilm subpopulation. Overall this work shows the utility of selective proteomics as applied to bacterial physiology and describes the broad biological insight obtained from that application.

Thermogravimetric and kinetic analysis of the decomposition of solid recovered fuel from municipal solid waste

The thermal decomposition of a solid recovered fuel has been studied using thermogravimetry, in order to get information about the main steps in the decomposition of such material. The study comprises two different atmospheres: inert and oxidative. The kinetics of decomposition is determined at three different heating rates using the same kinetic constants and model for both atmospheres at all the heating rates simultaneously. A good correlation of the TG data is obtained using three nth-order parallel reactions.

Analysis of the failure of cracked biscuits

Cracks or checks in biscuits weaken the material and cause the product to break at low load levels that are perceived as injurious to product quality. In this work, the structural response of circular digestive biscuits, with diameter 72 mm and thickness 7.2 mm, simply supported around the circumference and loaded by a central concentrated force was investigated by experiment and theory. Tests were conducted to quantify the distribution in breakage strength for structurally sound biscuits, biscuits with natural checks and biscuits with a single known part-through crack. For sound biscuits the breakage force is Normally distributed with a mean of 12.5 N and standard deviation of 1.2 N. For biscuits with checks, the corresponding statistics are 9.6 N ± 2.62 N respectively. The presence of a crack weakens the biscuit and strength, as measured by breakage force falls almost linearly with crack length and crack depth. The orientation of the crack, whether radial or tangential, and its location (i.e. position of the crack mid-point on the biscuit surface) are also important. Deep, radial, cracks located close to the biscuit centre can reduce the strength by up to 50%. Two separate failure criteria were examined for sound and cracked biscuits respectively. The results from these tests were in good accord with theory. For a biscuit without defects, breakage occurred when maximum biscuit stress reached or exceeded the failure stress of 420 kPa. For a biscuit with cracks, breakage occurred as above or alternatively when its critical stress intensity factor of 18 kPam0.5 was reached.

An Analysis of the Early Prediction of Highway Construction Project Completion using the Contract Status Report

History has shown that projects move in and out of poor status through the life of the project. Predicting the success or failure of a project to complete on time because of its recent history on the contract status report could provide our project managers another tool for monitoring contract progress. In many instances, poor contract progress results in the loss of contract time and late completion of projects. This research evaluates the combinations of work type, point in time physical work begins, recent poor status, and contract bid amount as indicators of late project completion.

Economic feasibility analysis of the implementation of a high value-added molecule extraction system in an olive oil mill

The production of olive oil generates several by-products that can be seen as an additional business opportunity. Among them are the olive pits, already used for heat and/or electricity generation in some mills. They contain compounds that are commercially very interesting and, if recovered, contribute to the sustainability of the olive mills. The work presented in this paper is a preliminary evaluation of the economic feasibility of implementing a system based on a batch prototype with 1 m3 for the extraction of high value-added bioactive molecules from olive pits that are separated during the production of virgin olive oil. For the analysis, a small representative olive mill in Portugal was considered and the traditional Discounted Cash Flow Method was applied. Based on the assumptions made, the simple payback for implementation a system for the extraction of value-added molecules from the olive pits is around 7 years.