Direct correlation between non-random distribution of cations and ion transport mechanism in soda-lime silicate glasses

We report a direct correlation between dissimilar ion pair formation and alkali ion transport in soda-lime silicate glasses established via broad band conductivity spectroscopy and local structural probe techniques. The combined Raman and Nuclear Magnetic Resonance (NMR) spectroscopy techniques on these glasses reveal the coexistence of different anionic species and the prevalence of Na+-Ca2+ dissimilar pairs as well as their distributions. The spectroscopic results further confirm the formation of dissimilar pairs atomistically, where it increases with increasing alkaline-earth oxide content These results, are the manifestation of local structural changes in the silicate network with composition which give rise to different environments into which the alkali ions hop. The Na+ ion mobility varies inversely with dissimilar pair formation, i.e. it decreases with increase of non-random formation of dissimilar pairs. Remarkably, we found that increased degree of non-randomness leads to temperature dependent variation in number density of sodium ions. Furthermore, the present study provides the strong link between the dynamics of the alkali ions and different sites associated with it in soda-lime silicate glasses. (C) 2014 Elsevier B.V. All rights reserved.

Synthesis and evaluation of 2,5-di(4-aryloylaryloxymethyl)-1,3,4-oxadiazoles as anti-cancer agents

A series of 2,5-di(4-aryloylaryloxymethyl)-1,3,4-oxadiazoles 9a-j were obtained via multistep synthesis from hydroxybenzophenones 4a-e. The cytotoxicity of compounds 9a-j was evaluated against human leukemia cell lilies (K562 and CEM). The compounds exhibited moderate to good anti-cancer activity with compounds 9b and 9i having a chloro group exhibiting the best activity (IC50 = 10 mu M). Compound 9i exhibited activity against both the cell lines and 9b only exhibited activity against CEM. Further, a lactate dehydrogenase (LDH) assay and DNA fragmentation studies of the compounds 9a-j were also performed. (C) 2013 Elsevier Masson SAS. All rights reserved.

Vacancy mediated clipping of multi-layered graphene: A precursor for 1, 2 and 3D carbon structures

Using first principles calculations, we show that the overlapping defects in bi-layer graphene (both AA-and AB-stacked) interact forming inter-layer covalent bonds, giving rise to two-dimensional (2D) clipped structures, without explicit use of functional groups. These clipped structures can be transformed into one-dimensional (1D) double wall nanotubes (DWCNT) or multi-layered three dimensional (3D) bulk structures. These clipped structures show good mechanical strength due to covalent bonding between multi-layers. Clipping also provides a unique way to simultaneously harness the conductivity of both walls of a double wall nanotube through covalently bonded scattering junctions. With additional conducting channels and improved mechanical stability, these clipped structures can lead to a myriad of applications in novel devices. (C) 2015 Elsevier Ltd. All rights reserved.

Thermoelectric properties of Co substituted synthetic tetrahedrite

Transition metal atom (Co) substituted synthetic tetrahedrite compounds Cu12-xCoxSb4S13 (x = 0, 0.5, 1.0, 1.5, 2.0) were prepared by solid state synthesis. X-Ray Diffraction (XRD) patterns revealed tetrahedrite as the main phase, whereas for the compounds with x = 0, 0.5 a trace of impurity phase Cu3SbS4 was observed. The surface morphology showed a large grain size with low porosity, which indicated appropriate compaction for the hot pressed samples. The phase purity, as monitored by Electron Probe Micro Analysis (EPMA) is in good agreement with the XRD data. The elemental composition for all the compounds almost matched with the nominal composition. The X-ray Photoelectron Spectroscopy (XPS) data showed that Cu existed in both +1 and +2 states, while Sb exhibited +3 oxidation states. Elastic modulus and hardness showed a systematic variation with increasing Co content. The electrical resistivity and Seebeck coefficient increased with increase in the doping content due to the decrease in the number of carriers caused by the substitution of Co2+ on the Cu1+ site. The positive Seebeck coefficient for all samples indicates that the dominant carriers are holes. A combined effect of resistivity and Seebeck coefficient leads to the maximum power factor of 1.76 mW m(-1) K-2 at 673 K for Cu11.5Co0.5Sb4S13. This could be due to the optimization in the carrier concentration by the partial substitution of Co2+ on both the Cu1+ as well as Cu2+ site at the same doping levels, which is also supported by the XPS data. The total thermal conductivity systematically decreased with increase of doping content as it is mainly influenced by the decrease of carrier thermal conductivity. The maximum thermoelectric figure of merit zT = 0.98 was obtained at 673 K for Cu11.5Co0.5Sb4S13. (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

epsilon-expansions near three dimensions from conformal field theory

We formally extend the CFT techniques introduced in arXiv: 1505.00963, to phi(2d0/d0-2) theory in d = d(0) dimensions and use it to compute anomalous dimensions near d(0) = 3, 4 in a unified manner. We also do a similar analysis of the O(N) model in three dimensions by developing a recursive combinatorial approach for OPE contractions. Our results match precisely with low loop perturbative computations. Finally, using 3-point correlators in the CFT, we comment on why the phi(3) theory in d(0) = 6 is qualitatively different.

The influence of current density on the morphology and corrosion properties of MAO coatings on AZ31B magnesium alloy

Micro-arc oxidation (MAO) coatings were prepared on AZ31B magnesium alloy using alkaline silicate electrolyte at different current densities (0.026, 0.046 and 0.067 A/cm(2)). Field Emission Scanning Electron Microscopy (FESEM) analysis of the coating revealed an irregular porous structure with cracked morphology. Compositional analysis carried out for MAO coating showed the presence of almost an equal amount of Mg and 0 (34 wt.%) apart from other elements such as F, Si and AI. The cross-sectional FESEM images clearly portrayed that the MAO coating was dense along with the presence of very few fine pores. The surface roughness (R-a) of the coatings increased with an increase in the current density. Potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) studies were carried out for both the bare and MAO coated AZ31B Mg alloy in 3.5% NaCl solution. The corrosion potential (E-corr) and corrosion current density (i(corr)) values obtained for the bare substrate were -1.49 V and 46 mu A/cm(2), respectively. The coating prepared at 0.046 A/cm(2) exhibited the lowest i(corr) value of 7.79 x 10(-10) A/cm(2) and highest polarization resistance (41.6 M Omega cm(2)) attesting to the better corrosion resistance of the coating compared to other samples. EIS results also indicated almost similar corrosion behavior for the MAO coatings. Mott-Schottky analysis showed n-type and p-type semiconductor behavior for the oxide layer present on the bare magnesium alloy and MAO coatings respectively. (C) 2016 Published by Elsevier B.V.

Efecto de diferentes niveles de energía conservando la relación energía-proteína en piensos de inicio y finalización en pollos de engorde

En el presente estudio se compararon cuatro dietas con diferentes niveles de energía 2,940, 3,040, 3,140 y 3,240 (Kcal EM/Kg de alimento), los cuales fueron ajustados a los requerimientos nutricionales en cuanto a la relación caloría proteína recomendados por la Hubbard Farm, Inc. (1991). Durante un periodo de 56 días los broilers fueron evaluados en la granja avícola "Buenos Aires" que pertenece a la Tip Top Industrial S.A. se utilizaron 803 pollos de engorde de un día de nacidos de la línea Hubbard, los que fueron distribuidos aleatoriamente en tres unidades experimentales proporcionales a los cuatro tratamientos existentes, estos distribuidos en un diseño completamente al azar y sometidos a la prueba de Tukey el que proporciona la superioridad existente entre tratamientos. Se encontraron diferencias significativas (P<0.05) entre tratamientos en las variables peso vivo, ganancia de peso y conversión alimenticia pero no así para el consumo alimenticio. Los tratamientos T1 T2, T3 y T4 presentaron mortalidad al final del periodo de 2.57, 4.41, 7.88 y 10.89 (%) respectivamente y rendimiento en la canal del 84.45 % para todos los tratamientos. Se concluyó que las dietas más energéticas proporcionaban las mejores conversiones alimenticias y las mayores ganancias de peso. Y a medida que se incrementaba el nivel energético en las dietas los costos alimenticios también se incrementaban. La fórmula más económica es el T1 (2940 Kcal EM/Kg de alimento, 21.63 y 18.89 % de proteína para inicio y finalización) durante todas las semanas de estudio. El momento óptimo para la matanza es la sexta semana para el T 1 (2940 Kcal EM/Kg de alimento, 21.63 y 18.89 % de proteínas) y T2 (3040 Kcal EM/Kg de alimento, 22.36 y 19.15 % de proteínas) por efecto de los costos alimenticios.

Estudio de tres concentraciones de GA3, dos concentraciones de BAP y las consistencias líquida y semisólida del medio nutritivo en la micropropagación de clones de yuca (Manihot esculenta Crantz)

El presente trabajo se realizó en el Laboratorio de Cultivo de Tejidos Vegetales del Programa Recursos Genéticos Nicaragüenses (REGEN), ubicado en la Universidad Nacional Agraria (UNA). El experimento se evaluó en dos fases, en la primera fase se estudió el comportamiento in vitro de ápices de los clones de yuca (Manihot esculenta Crantz) MCol-22, Okra y Portland cultivados en un medio nutritivo MS (Murashige y Skoog, 1962) con concentraciones de 0.00 mg/1 y 0.040 mg/1 de BAP (6-bencil aminopurina) y concentraciones de 0.05 mg/1 0.10 mgfl y 0.20 mg/1 de GA3 (ácido giberélico). En la segunda fase se evaluó el comportamiento de cuatro clones (C6-1141, MCol-1505, MCol-2215 y MMex-59) en las consistencias de medio nutritivo semisólida y líquida. A través del estudio se determinó que el genotipo es un factor muy importante sobre la respuesta organogénica de los tejidos cultivados in vitro. Sin embargo, es posible definir medios nutritivos para grupos de clones, facilitando así el proceso de micropropagación de especies de importancia económica como la yuca. Los clones que sobresalieron en la primera fase fueron el Portland y MCol- 22. Con respecto al efecto del BAP la concentración 0.04 mg/1 predominó sobre la concentración 0.00 mg/1, para todas las variables evaluadas en el ensayo. Así mismo, la concentración 0.10 mg/1 de GA 3 resultó la más efectiva. Por otra parte, de las consistencias de medios nutritivos evaluados en la segunda fase, se determinó que la consistencia semisólida dió mejor resultado sobre el número de raíces y la consistencia líquida tuvo mayor influencia sobre la variable altura de planta.

Erizaintzako prestakuntzaren eboluzio historikoa Gipuzkoan. Praktiketako gaitasunen diseinua egungo beharrei egokitzeko.

397 pag.

Testing inflationary cosmology with the BICEP1 and BICEP2 experiments

Recent observations of the temperature anisotropies of the cosmic microwave background (CMB) favor an inflationary paradigm in which the scale factor of the universe inflated by many orders of magnitude at some very early time. Such a scenario would produce the observed large-scale isotropy and homogeneity of the universe, as well as the scale-invariant perturbations responsible for the observed (10 parts per million) anisotropies in the CMB. An inflationary epoch is also theorized to produce a background of gravitational waves (or tensor perturbations), the effects of which can be observed in the polarization of the CMB. The E-mode (or parity even) polarization of the CMB, which is produced by scalar perturbations, has now been measured with high significance. Con- trastingly, today the B-mode (or parity odd) polarization, which is sourced by tensor perturbations, has yet to be observed. A detection of the B-mode polarization of the CMB would provide strong evidence for an inflationary epoch early in the universe’s history.

In this work, we explore experimental techniques and analysis methods used to probe the B- mode polarization of the CMB. These experimental techniques have been used to build the Bicep2 telescope, which was deployed to the South Pole in 2009. After three years of observations, Bicep2 has acquired one of the deepest observations of the degree-scale polarization of the CMB to date. Similarly, this work describes analysis methods developed for the Bicep1 three-year data analysis, which includes the full data set acquired by Bicep1. This analysis has produced the tightest constraint on the B-mode polarization of the CMB to date, corresponding to a tensor-to-scalar ratio estimate of r = 0.04±0.32, or a Bayesian 95% credible interval of r < 0.70. These analysis methods, in addition to producing this new constraint, are directly applicable to future analyses of Bicep2 data. Taken together, the experimental techniques and analysis methods described herein promise to open a new observational window into the inflationary epoch and the initial conditions of our universe.

Upconversion luminescence and optical power limiting effect based on two- and three-photon absorption processes of ZnO crystal

Near-infrared to UV and visible upconversion luminescence was observed in single-crystalline ZnO under an 800 nm infrared femtosecond laser irradiation. The optical properties of the crystal reveal that the UV and VIS emission band are due to the exciton transition (D0X) bound to neutral donors and the deep luminescent centers in ZnO, respectively. The relationship between the upconversion luminescence intensity and the pump power of the femtosecond laser reveals that the UV emission belongs to three-photon sequential band-to-band excitation and the VIS emission belongs to two-photon simultaneous defect-absorption induced luminescence. A saturation phenomenon and polarization-dependent effect are also observed in the upconversion process of ZnO. A very good optical power limiting performance at 800 nm has been demonstrated. The two- and three-photon absorption coefficients of ZnO crystal were measured to be 0.2018 cm GW(-1) and 7.102 x 10(-3) cm(3) GW(-2), respectively. The two- and three-photon cross sections were calculated to be 1.189 x 10(-51) cm(4) s and 1.040 x 10(-80) cm(6) s(2), respectively. (c) 2007 Elsevier B.V. All rights reserved.

Estudo comparativo da citotoxicidade de cimentos obturadores sobre culturas de células endoteliais da linhagem ECV 304

Este estudo teve como objetivo avaliar, in vitro, a citotoxicidade dos cimentos endodônticos Densell Endo, Pulp-Fill, Endofill, Sealer 26, Pulp Canal Sealer e GuttaFlow após 12, 24 e 72 horas de tempo de contato, utilizando-se uma linhagem de células endoteliais ECV-304. Para a avaliação da viabilidade celular, utilizou-se o teste de citotoxicidade MTT. Para cada cimento foram preparados 12 corpos de prova que foram distribuídos em seis grupos experimentais de acordo com as marcas comerciais, sendo quatro para cada tempo. Foi criado um grupo controle que não foi submetido à ação de cimento. Para avaliação do efeito dos cimentos sobre as células endoteliais, os corpos de prova foram inseridos nos poços da placa cultura, incubados a 37C em presença de 5% de CO2 e 100% de umidade. Os testes MTT foram realizados, em quadruplicata, após 12, 24 e 72 horas de contato das amostras com o tapete celular. Foi utilizada a prova Two-Way Anova com o teste Post Hoc de Bonferroni com nível de significância de 5%. Na análise de 12 horas, foi possível observar que o cimento GuttaFlow apresentou média de absorbância de 0,055, seguido do Sealer 26 (média = 0,038). Os cimentos Pulp Canal Sealer e Densell Endo apresentaram a mesma média de absorbância (0,031). O Pulp Fill e o Endofill foram os cimentos que apresentaram maior citotoxicidade (média de absorbância = 0,024 e 0,021, respectivamente). O grupo controle apresentou média de absorbância de 0,158. Em 24 horas observou-se que os cimentos GuttaFlow e Sealer 26 apresentaram as maiores médias de absorbância (0,041 e 0,037, respectivamente), seguidos pelo cimento Pulp Canal Sealer que apresentou média de absorbância de 0,035. Já os cimentos Densell Endo e Pulp Fill apresentaram médias de absorbância de 0,033 e 0,032, respectivamente. O cimento Endofill apresentou uma média de 0,026 e o grupo controle de 0,086. Quando analisados em 72 horas, o cimento Pulp Canal Sealer obteve média de absorbância de 0,049, seguido dos cimentos GuttaFlow e Pulp Fill, ambos com 0,048. Os cimentos Densell Endo, Sealer 26 e Endofill apresentaram respectivamente, médias de 0,044, 0,040 e 0,036. O grupo controle diferenciou-se significativamente de todos os grupos em todos os tempos. Quando analisadas as médias gerais de absorbância dos grupos analisados observou-se que o cimento GuttaFlow se apresentou como o cimento com menor índice de citotoxicidade, apresentando média de absorbência de 0,048. Logo após, apresentando médias de absorbância iguais (0,038) encontraram-se os cimentos Pulp Canal Sealer e Sealer 26; seguidos do Densell Endo e do Pulp Fill, com 0,036 e 0,035, respectivamente. O grupo controle apresentou média de absorbância de 0,098. Portanto, tendo como base os resultados obtidos, pôde-se concluir que o cimento Endofill foi o que apresentou maior citotoxicidade e o cimento GuttaFlow, o menos citotóxico.

Análisis del nivel de sedentarismo mediante acelerometría y cuestionario IPAQ en personas con hipertensión primaria y sobrepeso u obesidad

Antecedentes: La hipertensión arterial y el sobrepeso u obesidad son considerados factores de riesgo cardiovascular, asociados de forma clara con el sedentarismo en la población adulta. La valoración del sedentarismo se puede realizar a través de métodos objetivos y subjetivos. Objetivos: Analizar el nivel de sedentarismo, mediante el cuestionario internacional de actividad física (AF) (IPAQ, método subjetivo) y acelerometría (método objetivo) en personas con HTA primaria y sobrepeso u obesidad. Determinar si existen diferencias entre ambos métodos de valoración y entre sexos. Métodos: Se llevaron a cabo las dos pruebas de valoración a 48 participantes del estudio EXERDIET-HTA (edad 51,9 ± 8,1 años). 1) Cuestionario IPAQ en versión corta que mide la AF realizada durante los últimos siete días. Los datos se clasificaron en tiempo sedentario, ligero, moderado o intenso según las recomendaciones generales de la Organización Mundial de la Salud. 2) Acelerometría triaxial durante siete días portado en la muñeca no dominante. El tiempo dedicado a conductas sedentarias, así como las diferentes intensidades de AF (ligera, moderada, vigorosa y muy vigorosa), Kcal, METs y tiempo de sueño se calcularon para los días laborables y de fin de semana. Resultados: IPAQ presentó una media de 6 h/día en comportamientos sedentarios en ambos sexos. No se presentaron diferencias entre sexos. El 85,4% resulta sedentario. Acelerometría: Los participantes presentan 1,7±0,2 MET de media al día, considerado un valor metabólico de gasto calórico ligero. El tiempo de sueño diario fue de 6,6h. El gasto calórico diario se corresponde con comportamientos sedentarios entre semana para hombres y mujeres (2038,5±801,6 kcal) y sólo los hombres incrementan el gasto el fin de semana (P=0,036). Se observó que las mujeres realizan más minutos de AF a intensidad moderada que los hombres durante toda la semana (P=0,029). Se observaron diferencias de actividad entre los días entre semana y el fin de semana, con más tiempo de sedentarismo entre semana (P=0,040) y más AF ligera el fin de semana (P=0,003), resultando esta diferencia debida al cambio de actividad en los hombres pero no en las mujeres. Todos los participantes superan los 150 minutos de AF moderada que se recomienda en las guías mundiales según la acelerometría. Conclusiones: Las personas hipertensas y con sobrepeso u obesidad presentan en general conductas sedentarias. Los patrones de sueño podrían estar relacionados con la enfermedad. Sería necesario reducir las conductas sedentarias como prevención de la obesidad y del desarrollo prematuro de enfermedades cardiovasculares, fomentando la práctica regular de AF y mejorando los hábitos de alimentación.

Deposition of ZnO thin films on (100) γ-LiAlO2 substrate

Optical properties for ZnO thin films grown on (100) γ-LiAlO2 (LAO) substrate by pulsed laser deposition method were investigated. The c-axis oriented ZnO films were grown on (100) γ-LiAlO2 substrates at the substrate temperature of 550 Celsius degrees. The transmittance of the films was over 85%. Peaks attributed to excitons were shown in absorption spectra, which indicated that thin films had high crystallinity. Photoluminescence spectra with the maximum peak at 540 nm were observed at room temperature, which seemed to be ascribed to oxygen vacancy in the ZnO films caused by diffusion of Li from the substrates into the films during the deposition.

Surface relief resonant Brewster niters with multiple channels

In this paper, a new type of resonant Brewster filters (RBF) with surface relief structure for the multiple channels is first presented by using the rigorous coupled-wave analysis and the S-matrix method. By tuning the depth of homogeneous layer which is under the surface relief structure, the multiple channels phenomenon is obtained. Long range, extremely low sidebands and multiple channels are found when the RBF with surface relief structure is illuminated with Transverse Magnetic incident polarization light near the Brewster angle calculated with the effective media theory of sub wavelength grating. Moreover, the wavelengths of RBF with surface relief structure can be easily shifted by changing the depth of homogeneous layer while its optical properties such as low sideband reflection and narrow band are not spoiled when the depth is changed. Furthermore, the variation of the grating thickness does not effectively change the resonant wavelength of RBF, but have a remarkable effect on its line width, which is very useful for designing such filters with different line widths at desired wavelength.