Estudo comparativo do comportamento da infecção de camundongos, através da inoculação subcutânea e intraperitoneal, utilizando-se duas cepas do Trypanosona cruzi

Foram utilizados camundongos brancos, pesando em média 18g e duas cepas de Trypanosoma cruzi, morfologicamente distintas: Y com predominância de formas sangüíneas delgadas e Bolívia com predomínio de formas largas. Os lotes de animais receberam 2 x 10³, 2 x 10(4) e 2 x 10(5) tripanossomos por animal e as vias de inoculação utilizadas foram a intraperitoneal e a subcutânea. Nos animais foi observado o curso de infecção. Os resultados obtidos revelaram que, nos experimentos em que se utilizou a cepa Y, existem algumas diferenças significantes, com infecções mais uniformes e virulentas, após inoculação subcutânea de 2 x 10³ e 2 x 10(4) formas sangüíneas de T. cruzi. Entretanto, isto não ocorreu com a cepa Bolívia, pois os animais apresentaram o mesmo padrão de parasitemia e os demais caracteres morfológicos, quer se utilizasse a via subcutânea ou intraperitoneal. Tal fato permite sugerir a existência de interrelação entre os fatores via de inoculação traduzida pela maior ou menor presença de macrófagos no sítio de inoculação, e a morfologia das formas sangüíneas representada pela maior ou menor capacidade de penetração celular.

Ocorrência de Campylobater spp entre manipuladores de alimentos em cozinhas hospitalares de localidade urbana da região Sul do Brasil

Pesquisa realizada em cozinhas hospitalares e institucionais do Município de Florianópolis, SC (Brasil) sobre a presença de Campylobacter em fezes de manipuladores de alimentos, demonstrou que a média de portadores foi de 6,2%. De um total de 177 indivíduos pesquisados, os manipuladores assintomáticos, em cozinhas institucionais apresentaram índice de contaminação superior àquele registrado em cozinhas hospitalares, ou seja, 10,5 e 2,2%, respectivamente. Dentre os portadores, constatou-se uma estreita relação entre manipuladores do sexo masculino e faixa etária, que ficou entre 20 e 35 anos de idade. Observou-se forte indicativo, sugerindo maior prevalência de Campylobacter spp em fezes de manipuladores do sexo masculino do que aquele do sexo feminino. Constatou-se, igualmente, uma certa tendência vinculando o grau de escolaridade do manipulador com seu estado de portador.

Nanofiltration of surface water for the removal of endocrine disruptors

The assessment of surface water nanofiltration (NF) for the removal of endocrine disruptors (EDs) Nonylphenol Ethoxylate (IGEPAL), 4-Nonylphenol (NP) and 4-Octylphenol (OP) was carried out with three commercial NF membranes - NF90, NF200, NF270. The permeation experiments were conducted in laboratory flat-cell units of 13.2 x 10(-4) m(2) of surface area and in a DSS Lab-unit M20 with a membrane surface area of 0.036 m2. The membranes hydraulic permeabilities ranged from 3.7 to 15.6 kg/h/m(2)/bar and the rejection coefficients to NaCl, Na2SO4 and Glucose are for NF90: 97%, 99% and 97%, respectively; for NF200: 66%, 98% and 90%, respectively and for NF270: 48%, 94% and 84%, respectively. Three sets of nanofiltration experiments were carried out: i) NF of aqueous model solutions of NP, IGEPAL and OP running in total recirculation mode; ii) NF of surface water from Rio Sado (Settibal, Portugal) running in concentration mode; iii) NF of surface water from Rio Sado inoculated with NP, IGEPAL and OP running in concentration mode. The results of model solutions experiments showed that the EDs rejection coefficients are approximately 100% for all the membranes. The results obtained for the surface water showed that the rejection coefficients to natural organic Matter (NOM) are 94%, 82% and 78% for NF90, NF200 and NF 270 membranes respectively, with and without inoculation of EDs. The rejection coefficients to EDs in surface water with and without inoculation of EDs are 100%, showing that there is a fraction of NOM of high molecular weight that retains the EDs in the concentrate and that there is a fraction of NOM of low molecular weight that permeates through the NF membranes free of EDs.

OC/EC ratio observations in Europe: Re-thinking the approach for apportionment between primary and secondary organic carbon

This study explores a large set of OC and EC measurements in PM(10) and PM(2.5) aerosol samples, undertaken with a long term constant analytical methodology, to evaluate the capability of the OC/EC minimum ratio to represent the ratio between the OC and EC aerosol components resulting from fossil fuel combustion (OC(ff)/EC(ff)). The data set covers a wide geographical area in Europe, but with a particular focus upon Portugal, Spain and the United Kingdom, and includes a great variety of sites: urban (background, kerbside and tunnel), industrial, rural and remote. The highest minimum ratios were found in samples from remote and rural sites. Urban background sites have shown spatially and temporally consistent minimum ratios, of around 1.0 for PM(10) and 0.7 for PM(2.5).The consistency of results has suggested that the method could be used as a tool to derive the ratio between OC and EC from fossil fuel combustion and consequently to differentiate OC from primary and secondary sources. To explore this capability, OC and EC measurements were performed in a busy roadway tunnel in central Lisbon. The OC/EC ratio, which reflected the composition of vehicle combustion emissions, was in the range of 03-0.4. Ratios of OC/EC in roadside increment air (roadside minus urban background) in Birmingham, UK also lie within the range 03-0.4. Additional measurements were performed under heavy traffic conditions at two double kerbside sites located in the centre of Lisbon and Madrid. The OC/EC minimum ratios observed at both sites were found to be between those of the tunnel and those of urban background air, suggesting that minimum values commonly obtained for this parameter in open urban atmospheres over-predict the direct emissions of OC(ff) from road transport. Possible reasons for this discrepancy are explored. (C) 2011 Elsevier Ltd. All rights reserved.

On the solubility of three disperse anthraquinone dyes in supercritical carbon dioxide: new experimental data and correlation

Solubility measurements of quinizarin. (1,4-dihydroxyanthraquinone), disperse red 9 (1-(methylamino) anthraquinone), and disperse blue 14 (1,4-bis(methylamino)anthraquinone) in supercritical carbon dioxide (SC CO2) were carried out in a flow type apparatus, at a temperature range from (333.2 to 393.2) K and at pressures from (12.0 to 40.0) MPa. Mole fraction solubility of the three dyes decreases in the order quinizarin (2.9 x 10(-6) to 2.9.10(-4)), red 9 (1.4 x 10(-6) to 3.2 x 10(-4)), and blue 14 (7.8 x 10(-8) to 2.2 x 10(-5)). Four semiempirical density based models were used to correlatethe solubility of the dyes in the SC CO2. From the correlation results, the total heat of reaction, heat of vaporization plus the heat of solvation of the solute, were calculated and compared with the results presented in the literature. The solubilities of the three dyes were correlated also applying the Soave-Redlich-Kwong cubic equation of state (SRK CEoS) with classical mixing rules, and the physical properties required for the modeling were estimated and reported.

Influence of reconstruction parameters during filtered backprojection and ordered-subset expectation maximization in the measurement of the left-ventricular volumes and function during gated SPECT

A crucial method for investigating patients with coronary artery disease (CAD) is the calculation of the left ventricular ejection fraction (LVEF). It is, consequently, imperative to precisely estimate the value of LVEF--a process that can be done with myocardial perfusion scintigraphy. Therefore, the present study aimed to establish and compare the estimation performance of the quantitative parameters of the reconstruction methods filtered backprojection (FBP) and ordered-subset expectation maximization (OSEM). Methods: A beating-heart phantom with known values of end-diastolic volume, end-systolic volume, and LVEF was used. Quantitative gated SPECT/quantitative perfusion SPECT software was used to obtain these quantitative parameters in a semiautomatic mode. The Butterworth filter was used in FBP, with the cutoff frequencies between 0.2 and 0.8 cycles per pixel combined with the orders of 5, 10, 15, and 20. Sixty-three reconstructions were performed using 2, 4, 6, 8, 10, 12, and 16 OSEM subsets, combined with several iterations: 2, 4, 6, 8, 10, 12, 16, 32, and 64. Results: With FBP, the values of end-diastolic, end-systolic, and the stroke volumes rise as the cutoff frequency increases, whereas the value of LVEF diminishes. This same pattern is verified with the OSEM reconstruction. However, with OSEM there is a more precise estimation of the quantitative parameters, especially with the combinations 2 iterations × 10 subsets and 2 iterations × 12 subsets. Conclusion: The OSEM reconstruction presents better estimations of the quantitative parameters than does FBP. This study recommends the use of 2 iterations with 10 or 12 subsets for OSEM and a cutoff frequency of 0.5 cycles per pixel with the orders 5, 10, or 15 for FBP as the best estimations for the left ventricular volumes and ejection fraction quantification in myocardial perfusion scintigraphy.

Body dissatisfaction in Brazilian schoolchildren: prevalence and associated factors

OBJECTIVE: To examine the prevalence of body dissatisfaction and associated factors in 8- to 11-year-old schoolchildren. METHODS: A cross-sectional study including children aged 8- to 11-years enrolled in public and private schools in Porto Alegre, Southern Brazil, was carried out from August to December, 2001. A total of 901 subjects were selected through cluster sampling. Participants answered a questionnaire aimed at measuring body dissatisfaction and self-esteem and questions about family and social pressures on weight change. Height and weight were measured. The relationship between body dissatisfaction and the variables studied was measured by logistic regression. RESULTS: The prevalence of body dissatisfaction was 82%. Fifty-five percent of the girls wanted a thinner body size, and 28% desired a larger one; the estimates for the boys were 43% and 38%, respectively. Children with the lowest self-esteem (OR=1.80; 95% CI: 1.13-2.89) and who thought their parents (OR=6.10; 95% CI: 2.95-12.60) and friends (OR=1.81; 95% CI: 1.02-3.20) expected them to be thinner showed a higher chance of presenting body dissatisfaction. CONCLUSIONS: Body dissatisfaction was highly prevalent among the evaluated schoolchildren, especially in those with lower self-esteem and who thought their parents and friends expected them to be thinner.

Direitos das crianças institucionalizadas: um estudo de caso num centro de acolhimento temporário

Dissertação de 2º Ciclo conducente ao grau de Mestre em Ciências da Educação, especialização em Intervenção Precoce.

Formation of oriented nickel aggregates in rutile single crystals by Ni implantation

The magnetic and electrical properties of Ni implanted single crystalline TiO2 rutile were studied for nominal implanted fluences between 0.5 x 10(17) cm(-2) and 2.0 x 10(17) cm(-2) with 150 keV energy, corresponding to maximum atomic concentrations between 9 at% and 27 at% at 65 nm depth, in order to study the formation of metallic oriented aggregates. The results indicate that the as implanted crystals exhibit superparamagnetic behavior for the two higher fluences, which is attributed to the formation of nanosized nickel clusters with an average size related with the implanted concentration, while only paramagnetic behavior is observed for the lowest fluence. Annealing at 1073 K induces the aggregation of the implanted nickel and enhances the magnetization in all samples. The associated anisotropic behavior indicates preferred orientations of the nickel aggregates in the rutile lattice consistent with Rutherford backscattering spectrometry-channelling results. Electrical conductivity displays anisotropic behavior but no magnetoresistive effects were detected. (C) 2013 Elsevier B.V. All rights reserved.

Captura de culicídeos em área urbana: avaliação do método das caixas de repouso

OBJETIVO: Avaliar a ocorrência de população adulta de culicídeos em área urbana e medir a sensibilidade do método de coleta em caixa de repouso MÉTODOS: Foram coletados mosquitos entre 1999 e 2000, em duas cidades do Estado de São Paulo: Ocauçu e Uchoa. Em cada uma delas, sortearam-se 15 quadras, e em cada quadra um domicílio, onde foram instaladas duas caixas de repouso, no intra e no peridomicílio. Realizaram-se coletas mensais por domicílio, durante 13 meses, utilizando aspiradores manuais no intra e peridomicílio e no interior das caixas. Os espécimes capturados foram levados ao laboratório para triagem e identificação por espécie e sexo. RESULTADOS: Dos 2.112 espécimes de culicídeos coletados, 99,7% corresponderam a quatro espécies: Culex quinquefasciatus, Aedes aegypti, Cx. declarator e Cx. coronator. A distribuição percentual dessas espécies foi, respectivamente, em Ocauçu: 83,3%, 3,2%, 10,8% e 2,4%, e em Uchoa: 83,8%, 8,4%, 4,4% e 3,0%. Das fêmeas do gênero Culex, 34,3% foram coletadas nas caixas de repouso e 59,9% encontravam-se no intradomicílio. Das fêmeas de Ae. aegypti, 17,6% foram coletadas nas caixas de repouso e 82,4% encontraram-se no intradomicílio. CONCLUSÕES: A grande maioria dos espécimes coletados pertenciam a quatro espécies de culicídeos, sendo Cx. quinquefasciatus a mais freqüente. Proporcionalmente, as fêmeas de Ae. aegypti ocuparam mais o intradomicílio do que as do gênero Culex. A caixa de repouso apresenta potencial de utilização como dispositivo de vigilância, mas precisa ser mais bem avaliada.

Practical Quality Control: Comparision of Methods on the Quantification of Stationary Phases in Paper and Thin-Layer Chromatographic Systems

Introduction: Paper and thin layer chromatography methods are frequently used in Classic Nuclear Medicine for the determination of radiochemical purity (RCP) on radiopharmaceutical preparations. An aliquot of the radiopharmaceutical to be tested is spotted at the origin of a chromatographic strip (stationary phase), which in turn is placed in a chromatographic chamber in order to separate and quantify radiochemical species present in the radiopharmaceutical preparation. There are several methods for the RCP measurement, based on the use of equipment as dose calibrators, well scintillation counters, radiochromatografic scanners and gamma cameras. The purpose of this study was to compare these quantification methods for the determination of RCP. Material and Methods: 99mTc-Tetrofosmin and 99mTc-HDP are the radiopharmaceuticals chosen to serve as the basis for this study. For the determination of RCP of 99mTc-Tetrofosmin we used ITLC-SG (2.5 x 10 cm) and 2-butanone (99mTc-tetrofosmin Rf = 0.55, 99mTcO4- Rf = 1.0, other labeled impurities 99mTc-RH RF = 0.0). For the determination of RCP of 99mTc-HDP, Whatman 31ET and acetone was used (99mTc-HDP Rf = 0.0, 99mTcO4- Rf = 1.0, other labeled impurities RF = 0.0). After the development of the solvent front, the strips were allowed to dry and then imaged on the gamma camera (256x256 matrix; zoom 2; LEHR parallel-hole collimator; 5-minute image) and on the radiochromatogram scanner. Then, strips were cut in Rf 0.8 in the case of 99mTc-tetrofosmin and Rf 0.5 in the case of 99mTc-HDP. The resultant pieces were smashed in an assay tube (to minimize the effect of counting geometry) and counted in the dose calibrator and in the well scintillation counter (during 1 minute). The RCP was calculated using the formula: % 99mTc-Complex = [(99mTc-Complex) / (Total amount of 99mTc-labeled species)] x 100. Statistical analysis was done using the test of hypotheses for the difference between means in independent samples. Results:The gamma camera based method demonstrated higher operator-dependency (especially concerning the drawing of the ROIs) and the measures obtained using the dose calibrator are very sensitive to the amount of activity spotted in the chromatographic strip, so the use of a minimum of 3.7 MBq activity is essential to minimize quantification errors. Radiochromatographic scanner and well scintillation counter showed concordant results and demonstrated the higher level of precision. Conclusions: Radiochromatographic scanners and well scintillation counters based methods demonstrate to be the most accurate and less operator-dependant methods.

Electrodeposition and characterization of nickel–copper metallic foams for application as electrodes for supercapacitors

Nickel-copper metallic foams were electrodeposited from an acidic electrolyte, using hydrogen bubble evolution as a dynamic template. Their morphology and chemical composition was studied by scanning electron microscopy and related to the deposition parameters (applied current density and deposition time). For high currents densities (above 1 A cm(-2)) the nickel-copper deposits have a three-dimensional foam-like morphology with randomly distributed nearly-circular pores whose walls present an open dendritic structure. The nickel-copper foams are crystalline and composed of pure nickel and a copper-rich phase containing nickel in solid solution. The electrochemical behaviour of the material was studied by cyclic voltammetry and chronopotentiometry (charge-discharge curves) aiming at its application as a positive electrode for supercapacitors. Cyclic voltammograms showed that the Ni-Cu foams have a pseudocapacitive behaviour. The specific capacitance was calculated from charge-discharge data and the best value (105 F g(-1) at 1 mA cm(-2)) was obtained for nickel-copper foams deposited at 1.8 A cm(-2) for 180 s. Cycling stability of these foams was also assessed and they present a 90 % capacitance retention after 10,000 cycles at 10 mA cm(-2).

Direct electroanalytical determination of fluvastatin in a pharmaceutical dosage form: batch and flow analysis

The reduction of luvastatin (FLV) at a hanging mercury-drop electrode (HMDE) was studied by square-wave adsorptive-stripping voltammetry (SWAdSV). FLV can be accumulated and reduced at the electrode, with a maximum peak current intensity at a potential of approximately 1.26V vs. AgCl=Ag, in an aqueous electrolyte solution of pH 5.25. The method shows linearity between peak current intensity and FLV concentration between 1.0 10 8 and 2.7 10 6 mol L 1. Limits of detection (LOD) and quantification (LOQ) were found to be 9.9 10 9 mol L 1 and 3.3 10 8 mol L 1, respectively. Furthermore, FLV oxidation at a glassy carbon electrode surface was used for its hydrodynamic monitoring by amperometric detection in a flow-injection system. The amperometric signal was linear with FLV concentration over the range 1.0 10 6 to 1.0 10 5 mol L 1, with an LOD of 2.4 10 7 mol L 1 and an LOQ of 8.0 10 7 mol L 1. A sample rate of 50 injections per hour was achieved. Both methods were validated and showed to be precise and accurate, being satisfactorily applied to the determination of FLV in a commercial pharmaceutical.

Jornadas de trabalho na enfermagem: entre necessidades individuais e condições de trabalho

OBJETIVO: Analisar fatores associados à jornada de trabalho profissional e à jornada de trabalho total (profissional + doméstica) em profissionais de enfermagem. MÉTODOS: Estudo transversal realizado em hospital universitário no município de São Paulo, SP, entre 2004 e 2005. Participaram 696 trabalhadores (enfermeiros, técnicos e auxiliares de enfermagem), predominantemente mulheres (87,8%), que trabalhavam em turnos diurnos e/ou noturnos. Foi aplicado questionário autopreenchível sobre dados sociodemográficos, condições de trabalho e de vida; e versões traduzidas e adaptadas para o português das escalas de demanda-controle-apoio social no trabalho, de desequilíbrio esforço-recompensa, do Questionário Genérico de Avaliação de Qualidade de Vida e do Índice de Capacidade para o Trabalho. Foram utilizados modelos de regressão logística para a análise dos dados. RESULTADOS: Ser o único responsável pela renda familiar, o trabalho noturno e o desequilíbrio esforço-recompensa foram as únicas variáveis associadas tanto à jornada profissional (OR = 3,38; OR = 10,43; OR = 2,07, respectivamente) quanto à jornada total (OR = 1,57; OR = 3,37; OR = 2,75, respectivamente). Nenhuma das variáveis ligadas às jornadas de trabalho se associou significativamente ao baixo Índice de Capacidade para o Trabalho. O tempo insuficiente para o repouso se mostrou estatisticamente associado às jornadas profissional (OR = 2,47) e total (OR = 1,48). O tempo insuficiente para o lazer se mostrou significativamente associado à jornada profissional (OR = 1,58) e valor limítrofe para a jornada total (OR = 1,43). CONCLUSÕES: A responsabilidade financeira, o trabalho noturno e o desequilíbrio esforço-recompensa são variáveis que merecem ser contempladas em estudos sobre as jornadas de trabalho em equipes de enfermagem. Sugere-se que estudos sobre o tema abordem a renda individual do trabalhador, detalhando melhor a relação entre os esforços e recompensas, e principalmente discussões que considerem as relações de gênero.

Fatores maternos e neonatais associados ao mecônio no líquido amniótico em um centro de parto normal

OBJETIVO: Analisar a frequência e os fatores maternos e neonatais associados ao mecônio no líquido amniótico no parto. MÉTODOS: Estudo transversal com 2.441 nascimentos em um centro de parto normal hospitalar em São Paulo, SP, em março e abril de 2005. A associação entre mecônio no líquido amniótico e as variáveis independentes (idade materna, paridade, ter ou não cesariana prévia, idade gestacional, antecedentes obstétricos, uso de ocitocina no trabalho de parto, dilatação cervical na admissão, tipo do parto atual, peso do RN, índice de Apgar de 1º e 5º minutos de vida) foi expressa como razão de prevalência. RESULTADOS: Verificou-se mecônio no líquido amniótico em 11,9% dos partos; 68,2% desses foram normais e 38,8%, cesarianas. O mecônio esteve associado a: primiparidade (RP = 1,49; IC95% 1,29;1,73), idade gestacional ≥ 41 semanas (RP = 5,05; IC95% 1,93;13,25), ocitocina no parto (RP = 1,83, IC95% 1,60;2,10), cesariana (RP = 2,65; IC95% 2,17;3,24) e índice de Apgar < 7 no 5º minuto (RP = 2,96, IC95% 2,94;2,99). A mortalidade neonatal foi 1,6/1.000 nascidos vivos; mecônio no líquido amniótico foi encontrado em 50% das mortes neonatais e associado a maiores taxas de partos cirúrgicos. CONCLUSÕES: Emprego de ocitocina, piores condições do recém-nascido logo após o parto e aumento de taxas de cesariana foram fatores associados ao mecônio. A utilização rotineira de ocitocina no intraparto poderia ser revista por sua associação com mecônio no líquido amniótico.