SiC Multilayer Structures as Light Controlled Photonic Active Filters

Tunable wavelength division multiplexing converters based on amorphous SiC multilayer photonic active filters are analyzed. The configuration includes two stacked p-i-n structures (p(a-SiC:H)-i'(a-SiC:H)-n(a-SiC:H)-p(a-SiC:H)-i(a-Si:H)-n(a-Si:H)) sandwiched between two transparent contacts. The manipulation of the magnitude is achieved through appropriated front and back backgrounds. Transfer function characteristics are studied both theoretically and experimentally. An algorithm to decode the multiplex signal is established. An optoelectronic model supports the optoelectronic logic architecture. Results show that the light-activated device combines the demultiplexing operation with the simultaneous photodetection and self-amplification of an optical signal. The output waveform presents a nonlinear amplitude-dependent response to the wavelengths of the input channels. Depending on the wavelength of the external background and irradiation side, it acts either as a short- or a long-pass band filter or as a band-stop filter. A two-stage active circuit is presented and gives insight into the physics of the device.

ROM-less RNS-to-binary converter moduli {22N − 1, 22N + 1, 2N − 3, 2N + 3}

In this paper, a novel ROM-less RNS-to-binary converter is proposed, using a new balanced moduli set {22n-1, 22n + 1, 2n-3, 2n + 3} for n even. The proposed converter is implemented with a two stage ROM-less approach, which computes the value of X based only in arithmetic operations, without using lookup tables. Experimental results for 24 to 120 bits of Dynamic Range, show that the proposed converter structure allows a balanced system with 20% faster arithmetic channels regarding the related state of the art, while requiring similar area resources. This improvement in the channel's performance is enough to offset the higher conversion costs of the proposed converter. Furthermore, up to 20% better Power-Delay-Product efficiency metric can be achieved for the full RNS architecture using the proposed moduli set. © 2014 IEEE.

Modeling of a solid-state bipolar blumlein generator for N stages

This paper models an n-stage stacked Blumlein generator for bipolar pulses for various load conditions. Calculation of the voltage amplitudes in time domain at the load and between stages is described for an n-stage generator. For this, the reflection and transmission coefficients are mathematically modeled where impedance discontinuity occurs (i.e., at the junctions between two transmission lines). The mathematical model developed is assessed by comparing simulation results to experimental data from a two-stage Blumlein solid-state prototype.

Optimal offering strategies for wind power producers considering uncertainty and risk

This paper provides a two-stage stochastic programming approach for the development of optimal offering strategies for wind power producers. Uncertainty is related to electricity market prices and wind power production. A hybrid intelligent approach, combining wavelet transform, particle swarm optimization and adaptive-network-based fuzzy inference system, is used in this paper to generate plausible scenarios. Also, risk aversion is explicitly modeled using the conditional value-at-risk methodology. Results from a realistic case study, based on a wind farm in Portugal, are provided and analyzed. Finally, conclusions are duly drawn.

Uncertainty in a mixed duopoly with quadratic costs

In this paper, we consider a mixed market with uncertain demand, involving one private firm and one public firm with quadratic costs. The model is a two-stage game in which players choose to make their output decisions either in stage 1 or stage 2. We assume that the demand is unknown until the end of the first stage. We compute the output levels at equilibrium in each possible role. We also determine ex-ante and ex-post firms’ payoff functions.

Cork stoppers industry: defining appropriate mould colonization

Aims: The main aims of this work were the study of cork slabs moulds colonization and the evaluation of the moulds diversity during cork processing steps, in different cork stoppers factories. Simultaneously, it was envisaged to perform an evaluation of the air quality. Methods and Results: Moulds were isolated and identified from cork slabs and cork samples in four cork stoppers factories. The identification was based on morphological characters and microscopic observation of the reproductive structures. Airborne spore dispersion was assessed using a two stage Andersen sampler. It was observed that Chrysonilia sitophila was always present on cork slabs during the maturing period, but mould diversity appeared to be associated to the different factory configurations and processing steps. Conclusions: Spatial separation of the different steps of the process, including physical separation of the maturation step, is essential to guarantee high air quality and appropriate cork slabs colonization, i.e. C. sitophila dominance. The sorting and cutting of the edges of cork slabs after boiling and before the maturing step is also recommended. Significance and Impact of the Study: This study is very important for the cork stopper industry as it gives clear indications on how to keep high quality manufacturing standards and how to avoid occupational health problems.

Cork stoppers industry: defining appropriate mould colonization

Aims: The main aims of this work were the study of cork slabs moulds colonization and the evaluation of the moulds diversity during cork processing steps, in different cork stoppers factories. Simultaneously, it was envisaged to perform an evaluation of the air quality. Methods and Results: Moulds were isolated and identified from cork slabs and cork samples in four cork stoppers factories. The identification was based on morphological characters and microscopic observation of the reproductive structures. Airborne spore dispersion was assessed using a two stage Andersen sampler. It was observed that Chrysonilia sitophila was always present on cork slabs during the maturing period, but mould diversity appeared to be associated to the different factory configurations and processing steps. Conclusions: Spatial separation of the different steps of the process, including physical separation of the maturation step, is essential to guarantee high air quality and appropriate cork slabs colonization, i.e. C. sitophila dominance. The sorting and cutting of the edges of cork slabs after boiling and before the maturing step is also recommended. Significance and Impact of the Study: This study is very important for the cork stopper industry as it gives clear indications on how to keep high quality manufacturing standards and how to avoid occupational health problems.

Time-domain optimization of amplifiers based on distributed genetic algorithms

Thesis presented in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the subject of Electrical and Computer Engineering

Depressão : detecção, diagnóstico e tratamento. Estudo de prevalência e despite das perturbações depressivas e tratamento

RESUMO:A depressão clínica é uma patologia do humor, dimensional e de natureza crónica, evoluindo por episódios heterogéneos remitentes e recorrentes, de gravidade variável, correspondendo a categorias nosológicas porventura artificiais mas clinicamente úteis, de elevada prevalência e responsável por morbilidade importante e custos sociais crescentes, calculando-se que em 2020 os episódios de depressão major constituirão, em todo o mundo, a segunda causa de anos de vida com saúde perdidos. Como desejável, na maioria dos países os cuidados de saúde primários são a porta de entrada para o acesso à recepção de cuidados de saúde. Cerca de 50% de todas as pessoas sofrendo de depressão acedem aos cuidados de saúde primários mas apenas uma pequena proporção é correctamente diagnosticada e tratada pelos médicos prestadores de cuidados primários apesar dos tratamentos disponíveis serem muito efectivos e de fácil aplicabilidade. A existência de dificuldades e barreiras a vários níveis – doença, doentes, médicos, organizações de saúde, cultura e sociedade – contribuem para esta generalizada ineficiência de que resulta uma manutenção do peso da depressão que não tem sido possível reduzir através das estratégias tradicionais de organização de serviços. A equipa comunitária de saúde mental e a psiquiatria de ligação são duas estratégias de intervenção com desenvolvimento conceptual e organizacional respectivamente na Psiquiatria Social e na Psicossomática. A primeira tem demonstrado sucesso na abordagem clínica das doenças mentais graves na comunidade e a segunda na abordagem das patologias não psicóticas no hospital geral. Todavia, a efectividade destas estratégias não se tem revelado transferível para o tratamento das perturbações depressivas e outras patologias mentais comuns nos cuidados de saúde primários. Novos modelos de ligação e de trabalho em equipa multidisciplinar têm sido demonstrados como mais eficazes e custo-efectivos na redução do peso da depressão, ao nível da prestação dos cuidados de saúde primários, quando são atinentes com os seguintes princípios estratégicos e organizacionais: detecção sistemática e abordagem da depressão segundo o modelo médico, gestão integrada de doença crónica incluindo a continuidade de cuidados mediante colaboração e partilha de responsabilidades intersectorial, e a aposta na melhoria contínua da qualidade. Em Portugal, não existem dados fiáveis sobre a frequência da depressão, seu reconhecimento e a adequação do tratamento ao nível dos cuidados de saúde primários nem se encontra validada uma metodologia de diagnóstico simples e fiável passível de implementação generalizada. Foi realizado um estudo descritivo transversal com os objectivos de estabelecer a prevalência pontual de depressão entre os utentes dos cuidados de saúde primários e as taxas de reconhecimento e tratamento pelos médicos de família e testar metodologias de despiste, com base num questionário de preenchimento rápido – o WHO-5 – associado a uma breve entrevista estruturada – o IED. Foram seleccionados aleatoriamente 31 médicos de família e avaliados 544 utentes consecutivos, dos 16 aos 90 anos, em quatro regiões de saúde e oito centros de saúde dotados com 219 clínicos gerais. Os doentes foram entrevistados por psiquiatras, utilizando um método padronizado, o SCAN, para diagnóstico de perturbação depressiva segundo os critérios da 10ª edição da Classificação Internacional de Doenças. Apurou-se que 24.8% dos utentes apresentava depressão. No melhor dos cenários, menos de metade destes doentes, 43%, foi correctamente identificada como deprimida pelo seu médico de família e menos de 13% dos doentes com depressão estavam bem medicados com antidepressivo em dose adequada. A aplicação seriada dos dois instrumentos não revelou dificuldades tendo permitido a identificação de pelo menos 8 em cada 10 doentes deprimidos e a exclusão de 9 em cada 10 doentes não deprimidos. Confirma-se a elevada prevalência da patologia depressiva ao nível dos cuidados primários em Portugal e a necessidade de melhorar a capacidade diagnóstica e terapêutica dos médicos de família. A intervenção de despiste, que foi validada, parece adequada para ser aplicada de modo sistemático em Centros de Saúde que disponham de recursos técnicos e organizacionais para o tratamento efectivo dos doentes com depressão. A obtenção da linha de base de indicadores de prevalência, reconhecimento e tratamento das perturbações depressivas nos cuidados de saúde primários, bem como a validação de instrumentos de uso clínico, viabiliza a capacitação do sistema para a produção de uma campanha nacional de educação de grande amplitude como a proposta no Plano Nacional de Saúde 2004-2010.------- ABSTRACT: Clinical depression is a dimensional and chronic affective disorder, evolving through remitting and recurring heterogeneous episodes with variable severity corresponding to clinically useful artificial diagnostic categories, highly prevalent and producing vast morbidity and growing social costs, being estimated that in 2020 unipolar major depression will be the second cause of healthy life years lost all over the world. In most countries, primary care are the entry point for access to health care. About 50% of all individuals suffering from depression within the community reach primary health care but a smaller proportion is correctly diagnosed and treated by primary care physicians though available treatments are effective and easily manageable. Barriers at various levels – pertaining to the illness itself, to patients, doctors, health care organizations, culture and society – contribute to the inefficiency of depression management and pervasiveness of depression burden, which has not been possible to reduce through classical service strategies. Community mental health teams and consultation-liaison psychiatry, two conceptual and organizational intervention strategies originating respectively within social psychiatry and psychosomatics, have succeeded in treating severe mental illness in community and managing non-psychotic disorders in the general hospital. However, these strategies effectiveness has not been replicated and transferable for the primary health care setting treatment of depressive disorders and other common mental pathology. New modified liaison and multidisciplinary team work models have been shown as more efficacious and cost-effective reducing depression burden at the primary care level namely when in agreement with principles such as: systematic detection of depression and approach accordingly to the medical model, chronic llness comprehensive management including continuity of care through collaboration and shared responsibilities between primary and specialized care, and continuous quality improvement. There are no well-founded data available in Portugal for depression prevalence, recognition and treatment adequacy in the primary care setting neither is validated a simple, teachable and implementable recognition and diagnostic methodology for primary care. With these objectives in mind, a cross-sectional descriptive study was performed involving 544 consecutive patients, aged 16-90 years, recruited from the ambulatory of 31 family doctors randomized within the 219 physicians working in eight health centres from four health regions. Screening strategies were tested based on the WHO-5 questionnaire in association with a short structured interview based on ICD-10 criteria. Depression ICD-10 diagnosis was reached according to the gold standard SCAN interview performed by trained psychiatrists. Any depressive disorder ICD-10 diagnosis was present in 24.8% of patients. Through the use of favourable recognition criteria, 43% of the patients were correctly identified as depressed by their family doctor and about 13% of the depressed patients were prescribed antidepressants at an adequate dosage. The serial administration of both instruments – WHO-5 and short structured interview – was feasible, allowing the detection of eight in ten positive cases and the exclusion of nine in ten non-cases. In Portugal, at the primary care level, high depressive disorder prevalence is confirmed as well as the need to improve depression diagnostic and treatment competencies of family doctors. A two-stage screening strategy has been validated and seems adequate for systematic use in health centres where technical and organizational resources for the effective management of depression are made available. These results can be viewed as primary care depressive disorders baseline indicators of prevalence, detection and treatment and, along with clinical useful instruments, the health system is more capacitated for the establishment of a national level large education campaign on depression such as proposed in the National Health Plan 2004-2010.

Incentive-based demand response programs designed by asset-light retailers for day-ahead market

Following the deregulation experience of retail electricity markets in most countries, the majority of the new entrants of the liberalized retail market were pure REP (retail electricity providers). These entities were subject to financial risks because of the unexpected price variations, price spikes, volatile loads and the potential for market power exertion by GENCO (generation companies). A REP can manage the market risks by employing the DR (demand response) programs and using its' generation and storage assets at the distribution network to serve the customers. The proposed model suggests how a REP with light physical assets, such as DG (distributed generation) units and ESS (energy storage systems), can survive in a competitive retail market. The paper discusses the effective risk management strategies for the REPs to deal with the uncertainties of the DAM (day-ahead market) and how to hedge the financial losses in the market. A two-stage stochastic programming problem is formulated. It aims to establish the financial incentive-based DR programs and the optimal dispatch of the DG units and ESSs. The uncertainty of the forecasted day-ahead load demand and electricity price is also taken into account with a scenario-based approach. The principal advantage of this model for REPs is reducing the risk of financial losses in DAMs, and the main benefit for the whole system is market power mitigation by virtually increasing the price elasticity of demand and reducing the peak demand.

PV inverters for module level applications

Dissertação para obtenção do Grau de Mestre em Energias Renováveis – Conversão Eléctrica e Utilização Sustentáveis

Transimpedance amplifier for integrated SpO2 optic sensor

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Application of OSN in membrane cascade for purification of the API Amoxicillin

Dissertação para obtenção do Grau de Mestre em Engenharia Química e Bioquímica

Challenges of converting nonprofit in for-profit-reasons decision making and key success factores of a conversion

Due to external constraints (opposed by the market and legal system) and internal changes nonprofit organizations have been converting to for-profit entities combining commercial revenue and social value creation. To create an understanding of the conversion process considering its challenges, the reasons, the decision-making process and key success factors of a conversion are examined. Therefore, a two-step research procedure is used combining literature research and a multiple case study approach based on expert interviews with known companies. The outcome is a helpful guideline (including a decision matrix) for social entrepreneurs that might face a conversion.

Practice variations in the production of health

This study investigates three questions related to medical practice variation. First, it tests whether average length of stay across Portuguese National Health Service hospitals varies when controlling for differences in patients’ characteristics. Second, it looks at hospital-level characteristics in order to find out whether these are able to explain differences in average length of stay across hospitals. Finally, it proposes a best practice average length of stay for each of the six episodes of care analyzed. To perform the analysis, administrative data from the Diagnosis-Related groups’ data set for the year of 2012 was used. A replication of a hierarchical two-stage model with hospital fixed effects was carried out. The results show that after taking patients’ characteristics into account, variation in average length of stay across hospitals exists. This variation cannot be explained by hospital-level characteristics.