Community structure of vascular plants in treefall gaps and fire-disturbed habitats in the Atlantic rainforest, southern Bahia, Brazil

The effects of disturbances on plant community structure in tropical forests have been widely investigated. However, a majority of these studies examined only woody species, principally trees, whereas the effects of disturbances on the whole assemblage of vascular plants remain largely unexplored. At the present study, all vascular plants < 5m tall were surveyed in four habitats: natural treefall gaps, burned forest, and their adjacent understorey. The burned area differed from the other habitats in terms of species composition. However, species richness and plant density did not differ between burned area and the adjacent understorey, which is in accordance to the succession model that predict a rapid recovery of species richness, but with a different species composition in areas under moderate disturbance. The treefall gaps and the two areas of understorey did not differ among themselves in terms of the number of individuals, number of species, nor in species composition. The absence of differences between the vegetation in treefall gaps and in understorey areas seems to be in agreement with the current idea that the species present in treefall gaps are directly related to the vegetation composition before gap formation. Only minimal differences were observed between the analyses that considered only tree species and those that considered all growth habits. This suggests that the same processes acting on tree species (the best studied group of plants in tropical forests) are also acting on the whole assemblage of vascular plants in these communities.

Population structure of Eschweilera coriacea (DC.) S. A. Mori in forest fragments in eastern Brazilian Amazonia

The population structure of a common canopy tree was examined in three sites to investigate the possible effects of forest fragmentation in eastern Amazonia. Evidence for the escape hypothesis of differential seed/seedling survival was evaluated. Two 1 ha plots were established at each site and all individuals of Eschweilera coriacea (DC.) S. A. Mori over 1 m tall were tagged, measured and mapped. Smaller individuals were recorded in the same way within subplots. Mature individuals were abundant at all sites with densities of 32-52 ha-1. The species exhibited substantial regeneration, although total population density varied fourfold among sites (1,256-4,805 individuals ha-1). Overall, juveniles were clumped while adults were randomly distributed. The difference between the dispersion pattern of adults and juveniles supported the escape hypothesis. However, no difference in population structure among sites could be related to the forest fragmentation.

Spatial variation in the structure and floristic composition of "restinga" vegetation in southeastern Brazil

We examined large-scale spatial variation of structural parameters and floristic composition in open Clusia scrub, a vegetation type of the Brazilian "restingas" (sandy coastal plain vegetation). This vegetation is organized in islands separated by sandy stretches with sparse herbaceous vegetation. We located 12 sample areas on three consecutive beach ridges, lying parallel to the coastline and at different distances from the ocean, in close proximity to two lagoons (Cabiúnas and Comprida). Each sample area was divided into three strips. We used the line intercept method to sample all woody plants ³ 50 cm tall. We used nested ANOVA to verify structural variation between different sampling scales. TWINSPAN analysis was performed to examine the variation in floristic composition between areas. The overall diversity index was 3.07. Six species are repeatedly dominant throughout the entire sampling area. There was homogeneity in relation to diversity and species richness between beach ridges but not within beach ridges. Floristic composition and structural parameters did not vary in relation to distance from the sea but floristic composition did vary as a function of proximity to Cabiúnas or Comprida lagoon. Differences in plant cover between sample areas may be related to the paleoformation of this sandy coastal plain.

Deoxygenation of fatty acids for production of fuels and chemicals

The decreasing fossil fuel resources combined with an increasing world energy demand has raised an interest in renewable energy sources. The alternatives can be solar, wind and geothermal energies, but only biomass can be a substitute for the carbon–based feedstock, which is suitable for the production of transportation fuels and chemicals. However, a high oxygen content of the biomass creates challenges for the future chemical industry, forcing the development of new processes which allow a complete or selective oxygen removal without any significant carbon loss. Therefore, understanding and optimization of biomass deoxygenation processes are crucial for the future bio–based chemical industry. In this work, deoxygenation of fatty acids and their derivatives was studied over Pd/C and TiO2 supported noble metal catalysts (Pt, Pt–Re, Re and Ru) to obtain future fuel components. The 5 % Pd/C catalyst was investigated in semibatch and fixed bed reactors at 300 °C and 1.7–2 MPa of inert and hydrogen–containing atmospheres. Based on extensive kinetic studies, plausible reaction mechanisms and pathways were proposed. The influence of the unsaturation in the deoxygenation of model compounds and industrial feedstock – tall oil fatty acids – over a Pd/C catalyst was demonstrated. The optimization of the reaction conditions suppressed the formation of by–products, hence high yields and selectivities towards linear hydrocarbons and catalyst stability were achieved. Experiments in a fixed bed reactor filled with a 2 % Pd/C catalyst were performed with stearic acid as a model compound at different hydrogen–containing gas atmospheres to understand the catalyst stability under various conditions. Moreover, prolonged experiments were carried out with concentrated model compounds to reveal the catalyst deactivation. New materials were proposed for the selective deoxygenation process at lower temperatures (~200 °C) with a tunable selectivity to hydrodeoxygenation by using 4 % Pt/TiO2 or decarboxylation/decarbonylation over 4 % Ru/TiO2 catalysts. A new method for selective hydrogenation of fatty acids to fatty alcohols was demonstrated with a 4 % Re/TiO2 catalyst. A reaction pathway and mechanism for TiO2 supported metal catalysts was proposed and an optimization of the process conditions led to an increase in the formation of the desired products.

Sellutehtaan TRS-hajapäästöjen hallinta

Diplomityön tavoitteena on selvittää TRS-hajapäästöjen muodostumista sekä päästöjen määrää UPM Kymmene Oyj:n Kaukaan sellu- ja paperitehtaalla. Työssä laaditaan TRS-hajapäästöjen mittausohjelma, minkä päivitetty massa- ja paperiteollisuuden BAT-vertailuasiakirja vaatii. Mittausohjelma täydentää tehdasintegraatin ilmapäästöjen valvontaohjelmaa. Hajapäästöjen lisäksi tavoitteena on selvittää häiriötilanteiden aiheuttamia TRS-päästömääriä. Kirjallisuusosassa selvitetään hajujen muodostumista sellun ja paperin valmistuksessa ja niiden käsittelyä ympäristövaikutusten minimoimiseksi. Lisäksi esitellään mittausmenetelmiä. Kokeellisessa osassa valituista kohteista mitataan TRS-pitoisuudet ja hajukaasujen virtaama, joiden perusteella lasketaan TRS-kuormitus. Kuormitus suhteutetaan sellutonnille. Osa kohteista on hajapäästökohteita ja osa kohteita, joista hajukaasut häiriötilanteissa johdetaan käsittelemättä ulos. Tulosten perusteella TRS-hajapäästöjä muodostuu sellun valmistuksessa noin 0,04 kgS/ADt ja jätevedenkäsittelyssä, pääasiassa lietteenkäsittelyssä 0,04 kgS/ADt. Hajapäästöjä syntyy eniten kohteissa, missä keräily on toteutettu kevyemmin tai sitä ei ole. Merkittävimmät kohteet Kaukaalla ovat lietteenkäsittely, koivukuitulinja ja mäntyöljylaitos. Havulinjan ja talteenotto-osaston hajapäästöt ovat muita osastoja vähäisemmät. Yhteensä sellutehtaan ja lietteenkäsittelyn TRS-hajapäästömäärä on 0,08 kgS/ADt, mikä on BAT vaihteluvälin (0,05-0,2 kgS/ADt) sisällä. TRS-häiriöpäästöjen osuus tehtaan TRS päästöistä voi häiriötilanteiden toistuessa nousta merkittäviksi. Tähän vaikuttaa merkittävästi häiriintyvä kohde.

Selvitys erilaisten mäntyöljynkeittoprosessien toiminnasta

Työn tavoitteena oli tutustua eri mäntyöljyprosessien toimintaan. Sulfaattisellun valmistuksessa syntyy sivutuotteena mäntyöljyä. Se tuo lisätuottoa sellutehtaalle. Nykypäivänä mäntyöljyn valmistukseen on kiinnitetty yhä enemmän huomiota uusien jalostusmahdollisuuksien vuoksi. Mäntyöljyä syntyy, kun mustalipeän pinnalta kuorittu suopa palstoitetaan sopivalla hapolla. Suopa koostuu puun uuteaineista eli hartsi- ja rasvahapoista sekä saippuattomista aineista. Suopa pitää erottaa mustalipeästä mahdollisimman hyvin, jotta se ei aiheuttaisi ongelmia sellutehtaan eri prosessin vaiheissa. Suopaa voidaan erottaa mustalipeästä säiliöerotuksena, sentrifugeilla tai hydrosykloneilla. Suovan palstoitusprosessi voi olla erä- tai jatkuvatoiminen prosessi. Jatkuvatoimisia prosesseja ovat: sentrifugi-, säiliödekantointi- ja HDS-prosessi. Mäntyöljyä voidaan käyttää kemianteollisuuden raaka-aineena tai siitä voidaan jalostaa biodieseliä. Tämä biodiesel on niin sanottua toisen polven biopolttoainetta eli se ei sisällä ravinnoksi kelpaavaa raaka-ainetta. Nykypäivänä markkinoilla on sekä eräkeitto- sekä jatkuvatoimisia prosesseja. Suovan erotussäiliöiden rinnalle on tullut uusi sentrifugeilla tapahtuva suovan erotussysteemi.

Avaliação do potencial fisiológica de sementes de beterraba

As informações disponíveis na literatura nacional sobre a avaliação do vigor de sementes de beterraba são escassas, embora essa cultura seja de grande importância. O objetivo do trabalho foi definir metodologia para avaliar o potencial fisiológico das sementes, comparando resultados obtidos em laboratório com a emergência de plântulas em campo. Sementes de beterraba, cultivar Top Tall Early Wonder, representadas por cinco lotes adquiridos no comércio, foram avaliadas quanto à viabilidade (teste de germinação) e ao vigor (testes de primeira contagem, velocidade de germinação, envelhecimento acelerado tradicional e com solução saturada de NaCl e emergência de plântulas em campo). O teste de envelhecimento acelerado com solução salina saturada manteve baixo o teor de água e não reduziu a intensidade de deterioração das sementes. Os testes de envelhecimento acelerado tradicional e com solução de NaCl, ambos a 42ºC, mostraram-se adequados para identificar diferenças no potencial fisiológico de sementes de beterraba.

Deterioração controlada em sementes de beterraba

O uso de testes de vigor é fundamental na avaliação do potencial fisiológico de sementes produzidas e comercializadas. O trabalho foi realizado com o objetivo de estudar o uso do teste de deterioração controlada na avaliação do potencial fisiológico de sementes de beterraba. Após lavagem dos frutos contendo as sementes em água corrente, oito lotes da cultivar Top Tall Early Wonder foram previamente avaliados pelos testes de germinação e de emergência de plântulas (EP). Para o ajuste do teor de água (TA) foram estudados os métodos de atmosfera úmida (AU) e substrato úmido (SU). O teste de deterioração controlada (DC) foi conduzido com 22 e 24% de água e exposição durante 12, 24 e 36 horas à temperatura de 45 ºC. Usou-se o delineamento experimental inteiramente casualizado, com oito repetições de 25 sementes, exceto o de EP, conduzido com quatro repetições de 50 sementes. Os dados foram analisados separadamente para cada combinação TA x períodos de deterioração e as médias comparadas usando-se o teste de Tukey (P<0,05). Análises de correlação simples foram estabelecidas entre os resultados dos testes de laboratório e a EP. O ajuste do TA de semente deve ser feito pelo método do SU. O teste de DC pode ser utilizado para avaliar o potencial fisiológico de sementes de beterraba, sendo indicada a combinação TA de 22%, a 45ºC, durante 24 horas.

Mäntyöljyn tislauksen esikäsittely

Raakamäntyöljy on selluteollisuuden sivutuote. Suopa erotetaan mustalipeästä ja palstoitetaan tuottaen siten raakamäntyöljyä. Raakamäntyöljy tislataan tavanomaisesti viiteen pääjakeeseen: rasvahapot, hartsihapot, mäntyöljytisle, esiöljy ja mäntyöljypiki. Näiden jakeiden lisäksi raakamäntyöljyssä on erityisesti mustalipeästä siihen erottuneita epäpuhtauksia, jotka haittaavat raakamäntyöljyn prosessointia. Epäpuhtauksia ovat orgaaniset ja epäorgaaniset yhdisteet, kuten metallit, suolat ja ligniini. Nämä epäpuhtaudet aiheuttavat haitallisia reaktioita prosessissa huonontaen siten lopputuotejakeiden laatua. Tämän lisäksi epäpuhtaudet aiheuttavat saostumia prosessilaitteissa alentaen siten prosessointitehokkuutta. Raakamäntyöljyn esikäsittelyllä tehostetaan tislauksen toimintaa. Työssä esitetään esikäsittelymenetelmistä mm. degumming-menetelmä, laimea happopesu, hiilidioksidikäsittely, valkaisu ja lämpökäsittely. Menetelmien pohjalta valitaan tätä työtä varten yksi menetelmä, jonka pohjalta suunnitellaan kokeellisessa osassa suoritettavat kokeet. Kokeellinen osuus koostuu esikokeista, varsinaisista kokeista ja lisäkokeista. Menetelmän tarkoituksena on saavuttaa epäpuhtauksille 90–95 % reduktioaste. Kokeiden onnistumista tutkitaan analysoimalla alkuperäinen raakamäntyöljy, sekä jokaisen kokeen jälkeen erotetut faasit. Työssä saavutettiin hyvä erotustehokkuus. Alkuperäisen tavoitteen mukaista reduktioastetta ei pystytty määrittämään eri analyysimenetelmien ja niiden analyysituloksissa ilmenneiden eroavaisuuksien vuoksi, mutta lisäkokeiden ansiosta pystyttiin vahvistamaan kyseisen koejärjestelmän optimaalinen poistoaste. Lisäksi työssä havaittiin että esikäsittelytulos on hyvin riippuvainen käsiteltävän raaka-aineen koostumuksesta.

Concordia Statue

The 8-foot tall Concordia statue made of bronze was unveiled in July of 1969. It was created by Canadian sculptress Eza Mayhew and weighs over 2500 lbs. Originally commissioned for Expo 67, it was later donated to Brock by Seagram's Distilling Company. The statue was placed just southeast of the Brock Tower, and still stands there today - between the Thistle Complex, Taro Hall, and Mackenzie Chown A Block. View facing northwest.

SchmonTower and Thistle East

The Schmon Tower can be seen here behind several tall trees located on the eastern edge of the Thistle Complex. This view is taken from approximately where Taro Hall stands.

Acquisition and transfer of experiential learning from rock climbing to the corporate workplace

There were three purposes to this study. The first purpose was to determine how learning can be influenced by various factors i~ the rock climbing experience. The second purpose was to examine what people can learn from the rock climbing experience. The third purpose was to investigate whether that learning can transfer from the rock climbing experience to the subjects' real life in the workplace. Ninety employees from a financial corporation in the Niagara Region volunteered for this study. All subjects were surveyed throughout a one-day treatment. Ten were purposefully selected one month later for interviews. Ten themes emerged from the subjects in terms of what was learned. Inspiration, motivation, and determination, preparation, goals and limitations, perceptions and expectations, confidence and risk taking, trust and support, teamwork, feedback and encouragement, learning from failure, and finally, skills and flow. All participants were able to transfer what was learned back to the workplace. The results of this study suggested that subjects' learning was influenced by their ability to: take risks in a safe environment, fail without penalty, support each other, plan without time constraints, and enjoy the company of fellow workers that they wouldn't normally associate with. Future directions for research should include different types of treatments such as white water rafting, sky diving, tall ship sailing, or caving.

Arsenic speciation by ion-exchange chromatography with on- line determination by hydride generation: electronic modification of the D.C. plasma by photon counting

A method using L-cysteine for the determination of arsenous acid (As(III)), arsenic acid (As(V)), monomethylarsonic acid (MMAA), and dimethylarsinic acid (DMAA) by hydride generation was demonstrated. The instrument used was a d.c. plasma atomic emission spectrometer (OCP-AES). Complete recovery was reported for As(III), As(V), and DMAA while 86% recovery was reported for MMAA. Detection limits were determined, as arsenic for the species listed previously, to be 1.2, 0.8, 1.1, and 1.0 ngemL-l, respectively. Precision values, at 50 ngemL-1 arsenic concentration, were f.80/0, 2.50/0, 2.6% and 2.6% relative standard deviation, respectively. The L-cysteine reagent was compared directly with the conventional hydride generation technique which uses a potassium iodide-hydrochloric acid medium. Recoveries using L-cysteine when compared with the conventional method provided the following results: similar recoveries were obtained for As(III), slightly better recoveries were obtained for As(V) and MMAA, and significantly better recoveries for DMAA. In addition, tall and sharp peak shapes were observed for all four species when using L-cysteine. The arsenic speciation method involved separation by ion exchange .. high perfonnance liquid chromatography (HPLC) with on-line hydride generation using the L.. cysteine reagent and measurement byOCP-AES. Total analysis time per sample was 12 min while the time between the start of subsequent runs was approximately 20 min. A binary . gradient elution program, which incorporated the following two eluents: 0.01 and 0.5 mM tri.. sodium citrate both containing 5% methanol (v/v) and both at a pH of approximately 9, was used during the separation by HPLC. Recoveries of the four species which were measured as peak area, and were normalized against As(III), were 880/0, 290/0, and 40% for DMAA, MMAA and As(V), respectively. Resolution factors between adjacent analyte peaks of As(III) and DMAA was 1.1; DMAA and MMAA was 1.3; and MMAA and As(V) was 8.6. During the arsenic speciation study, signals from the d.c. plasma optical system were measured using a new photon-signal integrating device. The_new photon integrator developed and built in this laboratory was based on a previously published design which was further modified to reflect current available hardware. This photon integrator was interfaced to a personal computer through an AID convertor. The .photon integrator has adjustable threshold settings and an adjustable post-gain device.

Proposal for Construction of Brock’s Monument, Queenston, newspaper fragment, 1824

Brock’s Monument is owned by Parks Canada and maintained by the Niagara Parks Commission in collaboration with the Friends of Fort George and Niagara National Historic Sites. It is located in Queenston Heights Park atop the Niagara Escarpment. On March 14, 1815, Parliament passed an act to erect a monument to the memory of General Isaac Brock. A design by engineer Francis Hall was selected. He envisioned a 135 ft. tall Tuscan column, made out of stone with a winding staircase inside. By the spring of 1824, work had begun on the monument. In June of that year, the cornerstone was laid and William Lyon Mackenzie was in attendance at the ceremony. It was on October 13th, 1824 (the anniversary of Brock’s death) that 6000 people traveled to Queenston to inter the remains of Brock and Lieutenant-Colonel Macdonell. This was the second burial for both. After 3 years the tower had reached 135 feet, but there was no inscription at the base, the fence around the observation deck had not been installed and there was no statue of Brock. Hall submitted a plan to finish the statue, but he was turned down and a simple ornament was placed where the Brock statue should have been. A massive blast of gunpowder destroyed the monument in 1840. It is alleged that an American sympathizer with the Upper Canada Rebellion set off the blast. Brock and Macdonell’s bodies were reburied in the Hamilton Family Cemetery in Queenston. The present monument was rebuilt in 1853. William Thomas (designer of St. Michael’s Cathedral in Toronto) was the architect. Brock and Macdonell were once again laid to rest in separate vaults at the statue. In 1968, Brock’s Monument was declared a national historical site. In 2005, it was closed to the public due to safety concerns, but it reopened in 2010. Source: http://www.thecanadianencyclopedia.com/articles/brocks-monument-queenston-heights

Maid of the Mist, Niagara, U.S.A.

The description of the image is "(6) Majestically Grand - the Falls from the 'Maid of the Mist,' Niagara, U.S.A.". The reverse of the image reads "You are on the deck of the small but sturdy little steamer that runs along near the foot of the falls. At this moment you are pretty nearly mid-stream, looking south. The American shore are up over your left shoulder. That tall, dark cliff at the extreme left of what you see is Goat Island. The people up there outlined against the sky look like dolls and no wonder; they are more than 160 feet above your head. Some of them are looking off over the unspeakable grandeurs of the Horseshoe Fall there at the right; some are without doubt looking down at the very boat and remarking that the passengers look like dolls. It is an awesome experience to go so near that never-ceasing downpour of waters from the sky. The air is full of the roar and iridescent spray, and it seems as if the boat must be drawn in under the overwhelming floods never to rise again. Yet, curiously enough, the river right around the boat is not so madly excited as you might expect. It seems more like some great creature, dazed, bewildered, stunned by some incredible experience and not yet quite aware of what has happened. (When it gets down into the Whirlpool Rapids, two miles below here, it is dramatically alive to its situation!) The gigantic curve of the cliffs, reaching in up-stream straight ahead, makes a contour line of over 3000 feet before it comes up against the Canadian banks on the west (right). Geologists say that the Falls ages ago must have been at least seven miles farther down the river (behind you) and have gradually won their way back. Even now the curve of the Horseshoe is worn away from two to four feet in a year. No wonder; 12, 000, 000 cubic feet of water (about 375, 000 tons) sweep over the rocks in one minute, and the same the next minute and the next and the next. See Niagara through the Stereoscope, with special maps locating all the landmarks about the Falls.