Targeting low-druggability bromodomains: fragment based screening and inhibitor design against the BAZ2B bromodomain

Bromodomains are epigenetic reader domains that have recently become popular targets. In contrast to BET bromodomains, which have proven druggable, bromodomains from other regions of the phylogenetic tree have shallower pockets. We describe successful targeting of the challenging BAZ2B bromodomain using biophysical fragment screening and structure-based optimization of high ligand-efficiency fragments into a novel series of low-micromolar inhibitors. Our results provide attractive leads for development of BAZ2B chemical probes and indicate the whole family may be tractable.

Computational investigation of the Plasmodium falciparum fatty acid biosynthetic pathway toward the discovery of novel antimalarials

The structural peculiarities of a protein are related to its biological function. In the fatty acid elongation cycle, one small carrier protein shuttles and delivers the acyl intermediates from one enzyme to the other. The carrier has to recognize several enzymatic counterparts, specifically interact with each of them, and finally transiently deliver the carried substrate to the active site. Carry out such a complex game requires the players to be flexible and efficiently adapt their structure to the interacting protein or substrate. In a drug discovery effort, the structure-function relationships of a target system should be taken into account to optimistically interfere with its biological function. In this doctoral work, the essential role of structural plasticity in key steps of fatty acid biosynthesis in Plasmodium falciparum is investigated by means of molecular simulations. The key steps considered include the delivery of acyl substrates and the structural rearrangements of catalytic pockets upon ligand binding. The ground-level bases for carrier/enzyme recognition and interaction are also put forward. The structural features of the target have driven the selection of proper drug discovery tools, which captured the dynamics of biological processes and could allow the rational design of novel inhibitors. The model may be perspectively used for the identification of novel pathway-based antimalarial compounds.

Modelling coupled physical-biogeochemical processes in ice-covered oceans

The last decades have seen a large effort of the scientific community to study and understand the physics of sea ice. We currently have a wide - even though still not exhaustive - knowledge of the sea ice dynamics and thermodynamics and of their temporal and spatial variability. Sea ice biogeochemistry is instead largely unknown. Sea ice algae production may account for up to 25% of overall primary production in ice-covered waters of the Southern Ocean. However, the influence of physical factors, such as the location of ice formation, the role of snow cover and light availability on sea ice primary production is poorly understood. There are only sparse localized observations and little knowledge of the functioning of sea ice biogeochemistry at larger scales. Modelling becomes then an auxiliary tool to help qualifying and quantifying the role of sea ice biogeochemistry in the ocean dynamics. In this thesis, a novel approach is used for the modelling and coupling of sea ice biogeochemistry - and in particular its primary production - to sea ice physics. Previous attempts were based on the coupling of rather complex sea ice physical models to empirical or relatively simple biological or biogeochemical models. The focus is moved here to a more biologically-oriented point of view. A simple, however comprehensive, physical model of the sea ice thermodynamics (ESIM) was developed and coupled to a novel sea ice implementation (BFM-SI) of the Biogeochemical Flux Model (BFM). The BFM is a comprehensive model, largely used and validated in the open ocean environment and in regional seas. The physical model has been developed having in mind the biogeochemical properties of sea ice and the physical inputs required to model sea ice biogeochemistry. The central concept of the coupling is the modelling of the Biologically-Active-Layer (BAL), which is the time-varying fraction of sea ice that is continuously connected to the ocean via brines pockets and channels and it acts as rich habitat for many microorganisms. The physical model provides the key physical properties of the BAL (e.g., brines volume, temperature and salinity), and the BFM-SI simulates the physiological and ecological response of the biological community to the physical enviroment. The new biogeochemical model is also coupled to the pelagic BFM through the exchange of organic and inorganic matter at the boundaries between the two systems . This is done by computing the entrapment of matter and gases when sea ice grows and release to the ocean when sea ice melts to ensure mass conservation. The model was tested in different ice-covered regions of the world ocean to test the generality of the parameterizations. The focus was particularly on the regions of landfast ice, where primary production is generally large. The implementation of the BFM in sea ice and the coupling structure in General Circulation Models will add a new component to the latters (and in general to Earth System Models), which will be able to provide adequate estimate of the role and importance of sea ice biogeochemistry in the global carbon cycle.

The grain-scale distribution and behaviour of melt and fluid in crystalline analogue systems

The production, segregation and migration of melt and aqueous fluids (henceforth called liquid) plays an important role for the transport of mass and energy within the mantle and the crust of the Earth. Many properties of large-scale liquid migration processes such as the permeability of a rock matrix or the initial segregation of newly formed liquid from the host-rock depends on the grain-scale distribution and behaviour of liquid. Although the general mechanisms of liquid distribution at the grain-scale are well understood, the influence of possibly important modifying processes such as static recrystallization, deformation, and chemical disequilibrium on the liquid distribution is not well constrained. For this thesis analogue experiments were used that allowed to investigate the interplay of these different mechanisms in-situ. In high-temperature environments where melts are produced, the grain-scale distribution in “equilibrium” is fully determined by the liquid fraction and the ratio between the solid-solid and the solid-liquid surface energy. The latter is commonly expressed as the dihedral or wetting angle between two grains and the liquid phase (Chapter 2). The interplay of this “equilibrium” liquid distribution with ongoing surface energy driven recrystallization is investigated in Chapter 4 and 5 with experiments using norcamphor plus ethanol liquid. Ethanol in contact with norcamphor forms a wetting angle of about 25°, which is similar to reported angles of rock-forming minerals in contact with silicate melt. The experiments in Chapter 4 show that previously reported disequilibrium features such as trapped liquid lenses, fully-wetted grain boundaries, and large liquid pockets can be explained by the interplay of the liquid with ongoing recrystallization. Closer inspection of dihedral angles in Chapter 5 reveals that the wetting angles are themselves modified by grain coarsening. Ongoing recrystallization constantly moves liquid-filled triple junctions, thereby altering the wetting angles dynamically as a function of the triple junction velocity. A polycrystalline aggregate will therefore always display a range of equilibrium and dynamic wetting angles at raised temperature, rather than a single wetting angle as previously thought. For the deformation experiments partially molten KNO3–LiNO3 experiments were used in addition to norcamphor–ethanol experiments (Chapter 6). Three deformation regimes were observed. At a high bulk liquid fraction >10 vol.% the aggregate deformed by compaction and granular flow. At a “moderate” liquid fraction, the aggregate deformed mainly by grain boundary sliding (GBS) that was localized into conjugate shear zones. At a low liquid fraction, the grains of the aggregate formed a supporting framework that deformed internally by crystal plastic deformation or diffusion creep. Liquid segregation was most efficient during framework deformation, while GBS lead to slow liquid segregation or even liquid dispersion in the deforming areas.

Kristallisation der Arbutin-Synthase und der Strictosidin Glukosidase - zwei Enzyme aus dem sekundären Glykosidstoffwechsel von Rauvolfia serpentina

Kristallisation der Arbutin-Synthase und der Strictosidin Glukosidase - zwei Enzyme aus dem sekundären Glykosidstoffwechsel von Rauvolfia serpentina Die vorliegende Arbeit befasst sich mit der Kristallisation und der strukturellen Auswertung der Arbutin-Synthase (AS) und der Strictosidin Glukosidase (SG). Beide Enzyme stammen aus der Medizinalpflanze Rauvolfia serpentina. Für die Kristallisation der Arbutin-Synthase wurden ca. 2500 verschiedene Beding-ungen experimentell untersucht. Für einige dieser Experimente wurde das Enzym molekularbiologisch und chemisch verändert. Trotzdem konnten keine Kristalle erhalten werden. Die bei diesen Veränderungen erhaltenen Ergebnisse wurden anhand von Vergleichen mit Strukturen anderer Glykosyltransferasen der gleichen Familie analysiert. Bei der Reinigung der AS konnte mit verschiedenen Trennsystemen nie eine homogene Lösung produziert werden. Der wahrscheinliche Grund für diese schlechte Isolierbarkeit, und damit der wahrscheinliche Grund für die schwierige Kris-tallisation, liegt in der überdurchschnittlich hohen Anzahl an Cysteinen in der Proteinsequenz. Mit den Aminosäuren Cys171, Cys253 und Cys461 wurden drei Cysteine gefunden, die einem Strukturvergleich nach an der Proteinoberfläche liegen und möglicherweise durch Quervernetzungen mit anderen Proteinmolekülen ein heterogenes Gemisch bilden, das nicht geordnet kristallisieren kann. Durch gezielte Mutationen dieser drei Aminosäuren könnte die Kristallisation zukünftig ermöglicht werden. Für die SG waren bereits Bedingungen bekannt bei denen nicht vermessbare Enzymkristalle (Nadeln) wuchsen. In weit gefächerten Versuchen konnten diese Kristalle jedoch nicht zu 3D-Wachstum angeregt werden. Es wurden mit einem HTS-Screening neue Bedingungen zur Kristallisation gefunden. Anschließend konnten die native Struktur und der Strictosidin/Enzym-Komplex vermessen und aufgeklärt werden. Die SG gehört zur Familie 1 der Glukosidasen (GH-1) und besitzt die in dieser Familie konservierte (beta/alpha)8-Barrel-Faltung. Im Vergleich mit 16 bekannten Glykosidasen der Familie GH-1 wurde die Substratbindung untersucht. Dabei wurde die in der Familie konservierte Zuckerbindung vorgefunden, jedoch große Unterschiede in der Aglykonbindung entdeckt. Es wurden Bedingungen für die Konformationsänderung des Trp388 erkannt. Diese Konformationsänderung dirigiert den Aglykonteil des Substrates auf verschiedene Seiten der Substratbindungstasche und teilt so die Familie GH-1 in zwei Gruppen.

Konditionale Mutagenese von Desmoglein 2 in der Maus

Desmosomen sind hoch organisierte interzelluläre Verbindungen, die Zellverbänden eine mechanische Stabilität verleihen. Die Intermediärfilamentnetzwerke benachbarter Zellen werden mit Hilfe der desmosomalen Cadherine vom Desmoglein- und Desmocollin-Typ miteinander verknüpft. Diese Glykoproteine interagieren miteinander im Interzellularspalt zwischen benachbarten Zellen und stellen mit ihren zytoplasmatischen Domänen einen Ankerpunkt für desmosomale Brückenproteine dar, an welche wiederum die Proteine des Intermediärfilament-Zytoskeletts binden. Bei der Maus spielt das desmosomale Cadherin Desmoglein 2 (DSG2) bereits in frühen Stadien der Embryogenese eine entscheidende Rolle. Homozygote DSG2-Knockout-Mäuse sterben bereits vor der Implantation des Embryos ab. Im adulten Tier ist Dsg2 die am weitesten verbreitete Isoform, in Darm, Leber und Herzmuskel wird es zudem exklusiv exprimiert. Ziel dieser Arbeit war es, die Bedeutung von Dsg2 in differenzierten Gewebeverbänden adulter Tiere zu untersuchen. Im Rahmen dieser Doktorarbeit wurden mehrere transgene Mauslinien hergestellt, in denen mit Hilfe des Cre/loxP-Systems eine Deletion im DSG2-Gen konditional und gewebsspezifisch induziert werden konnte. Dazu wurden zuerst zwei loxP-Sequenzen und eine mit zwei FRT-Stellen flankierte Neomyzinresistenzgen-Kassette in das DSG2-Gen von embryonalen Stammzellen durch homologe Rekombination eines Targeting-Konstrukts inseriert. Diese Zellen wurden in Blastozysten injiziert und Mauslinien hergestellt. Mit Hilfe der Flpe-Rekombinase wurde anschließend die Resistenzenzgen-Kassette entfernt. Diese Stämme wurden mit Mäusen verpaart, die eine induzierbare und gewebsspezifische Synthese der Cre-Rekombinase ermöglichen. Im Darmepithel und der Leber konnte eine gewebsspezifische Rekombination des DSG2-Gens induziert werden. Untersuchungen der DSG2-mRNA zeigten, dass die DSG2-Rekombination in der Darmschleimhaut nahezu vollständig erfolgte. Immunfluoreszenz-Analysen an Gewebsfragmenten induzierter Tiere mit Isotyp-spezifischen Antikörpern, die im Rahmen dieser Arbeit hergestellt worden waren, zeigten jedoch keine signifikanten Unterschiede der Desmosomenzahl und -verteilung. Daher wurden eGFP-Hybride des zu erwartenden mutierten Dsg2-Proteins in Zellen exprimiert und mit wildtypischem Dsg2 verglichen. Es konnte hinsichtlich der Verteilung und Morphologie der Desmosomen keine Unterschiede zwischen beiden Dsg2-Proteinen festgestellt werden. Der Dsg2-Mutante fehlen wichtige Proteinbereiche, die für die trans-Interaktion der extrazellulären Domäne verantwortlich sind, die Haupt-N-Glykosylierungsstelle, sowie eine der insgesamt vier Kalzium-Bindestellen. Dies sind Eigenschaften, von denen man bisher annahm, dass sie eine zentrale Bedeutung für die desmosomale Adhäsion besitzen. Weitere Experimente werden zeigen, inwieweit die hergestellte Dsg2-Mutante in „Stresssituationen“, wie sie z.B. bei Regenerationsvorgängen oder der Tumorgenese auftreten, zu veränderten adhäsiven Eigenschaften führt.

La neoangiogenesi nel reimpianto autologo di tessuto ovarico in pazienti a rischio di fallimento ovarico precoce: ottimizzazione dei metodi di crioconservazione di corticle ovarica

Introduzione L’efficacia dei chemio/radioterapici ha aumentato notevolmente l’aspettativa di vita delle pazienti oncologiche, tuttavia, questi trattamenti possono compromettere la funzionalità ovarica. La crioconservazione di tessuto ovarico, con il successivo reimpianto, ha lo scopo di preservare la fertilità delle pazienti a rischio di fallimento ovarico precoce. Scopo dello studio Definire la migliore procedura di crioconservazione e reimpianto in grado di ottenere la neovascolarizzazione del tessuto reimpiantato nel minor tempo possibile al fine di diminuire la perdita follicolare causata dall’ischemia durante la procedura. Materiali e metodi Per ciascuna paziente (3) le biopsie ovariche, sono state prelevate laparoscopicamente e crioconservate secondo il protocollo di congelamento lento/scongelamento rapido. Campioni di corticale ovarica sono stati processati per l’analisi istologica, ultrastrutturale, immuistochimica e confocale per valutare la preservazione morfologiaca del tessuto. Le fettine di corticale ovarica sono state scongelate e reimpiantate ortotopicamente (2), nelle ovaia e in due tasche peritoneali, o eterotopicamente (1), in due tasche create nel sottocute sovrapubico. Risultati Le analisi di microscopia hanno mostrato il mantenimento di una discreta morfologia dello stroma, e dei vasi criopreservati e un lieve ma non significativo danneggiamento dei follicoli scongelati. Tutte le pazienti hanno mostrato la ripresa della funzionalità endocrina rispettivamente dopo 2/4 mesi dal reimpianto. Il color-doppler, inoltre ha rivelato un significativo aumento della vascolarizzazione ovarica rispetto alla quasi totale assenza di vascolarizzazione prima del reimpianto, quando le pazienti mostravano una conclamata menopausa. Conclusioni Lo studio ha confermato la ripresa della vascolarizzazione dell’ovaio in seguito a reimpianto avascolare di fettine di corticale, senza l’impiego di fattori esogeni o meccanici aggiuntivi, in tempi concordanti con i dati della letteratura. I risultati sono incoraggianti e l’avanzare degli studi e della ricerca potranno contribuire allo sviluppo di nuove metodologie di reimpianto che possano avere un successo clinico ed una sicurezza superiori a quelle finora ottenute.

Messung dynamischer Prozesse in der Nähe von Grenzflächen mit Hilfe neu entwickelter Lichtstreumethoden

Die vorliegende Arbeit behandelt die Entwicklung und Erprobung zweier neuer dynamischer Lichtstreumethoden: Die Resonanz verstärkte Lichtstreuung (REDLS: resonance enhanced dynamic light scattering) und die Wellenleiter verstärkte Lichtstreuung (WEDLS: waveguide enhanced dynamic light scattering). Beide Methoden verwenden eine Kombination aus evaneszenten Wellen und dynamischer Lichtstreuung: Bei der REDLS-Technik wird das evaneszentes Feld eines Oberflächenplasmons verwendet, bei der WEDLS-Technik handelt es sich um das evaneszente Feld von Metallfilm verstärkten Leckwellenleitermoden. Die neuen Methoden liefern Informationen über die Dynamik an Grenzflächen über ein breites Zeitfenster (einige Nanosekunden bis hin zu mehreren Sekunden) mit einer räumlichen Auflösung im sub-Mikrometerbereich. Sie erweitern somit das Gebiet der dynamischen Lichtstreuung in evaneszenter Geometrie, bei dem bislang nur die evanescent wave dynamic light scattering (EWDLS) - Technik zur Verfügung stand. Bei der EWDLS-Technik wird das evaneszente Feld der Totalreflexion als kohärenter Lichtstrahl für die dynamische Lichtstreuung verwendet. Ein Vergleich mit der EWDLS-Technik zeigt ein stark erhöhtes Signal/Rausch-Verhältnis bei den neu entwickelten Techniken aufgrund der resonanten Anregung. Zusätzlich ist es sowohl bei der REDLS- als auch bei der WEDLS-Technik möglich Grenzflächenmodifikationen und damit z.B. Adsorptionsprozesse zu detektieren. Der Einfluss einer Grenzfläche auf die Diffusion von PS-Latex-Partikeln wurde untersucht. Die Grenzfläche bestand im Fall der REDLS-Technik aus Gold, bei der WEDLS-Technik aus PMMA. Die Funktionsweise und die Gültigkeit der neu entwickelten Techniken wurde mit Hilfe von PS-Latex-Partikeln mit hydrodynamischen Radien von R =11nm bis hin zu R=204nm demonstriert.

Rupture forces of split aptamers

Rupture forces of ligand-receptor interactions, such as proteins-proteins, proteins-cells, and cells-tissues, have been successfully measured by atomic force spectroscopy (AFS). For these measurements, the ligands and receptors were chemically modified so that they can be immobilized on the tip and on a substrate, respectively. The ligand interact the receptor when the tip approaches the substrate. This interaction can be studied by measuring rupture force upon retraction. However, this technique is not feasible for measurements involving small molecules, since they form only few H-bonds with their corresponding receptors. Modifying small molecules for immobilization on surfaces may block or change binding sites. Thus, recorded rupture forces might not reflect the full scope of the involved small ligand-receptor interactions.rnIn my thesis, a novel concept that allows measuring the rupture force of small involved ligand-receptor interactions and does not require molecular modification for immobilization was introduced. The rupture force of small ligand-receptor interaction is not directly measured but it can be determined from measurements in the presence and in the absence of the ligand. As a model system, the adenosine mono phosphate (AMP) and the aptamer that binds AMP were selected. The aptamer (receptor) is a single stranded DNA that can partially self-hybridize and form binding pockets for AMP molecules (ligands). The bonds between AMP and aptamer are provided by several H-bonds and pair stacking.rnIn the novel concept, the aptamer was split into two parts (oligo a and oligo b). One part was immobilized on the tip and the other one on the substrate. Approaching the tip to the substrate, oligo a and oligo b partially hybridized and the binding pockets were formed. After adding AMP into the buffer solution, the AMP bound in the pockets and additional H-bonds were formed. Upon retraction of the tip, the rupture force of the AMP-split aptamer complex was measured. In the presence of excess AMP, the rupture force increased by about 10 pN. rnThe dissociation constant of the AMP-split aptamer complex was measured on a single molecular level (~ 4 µM) by varying the AMP concentrations and measuring the rupture force at each concentration. Furthermore, the rupture force was amplified when more pockets were added to the split aptamer. rnIn the absence of AMP, the thermal off-rate was slightly reduced compared to that in the presence of AMP, indicating that the AMP stabilized the aptamer. The rupture forces at different loading rates did not follow the logarithmic fit which was usually used to describe the dependence of rupture forces at different loading rates of oligonucleotides. Two distinguished regimes at low and high loading rates were obtained. The two regimes were explained by a model in which the oligos located at the pockets were stretched at high loading rates. rnThe contribution of a single H-bond formed between the AMP molecule and the split aptamer was measured by reducing the binding groups of the AMP. The rupture forces reduce corresponding to the reduction of the binding groups. The phosphate group played the most important role in the formation of H-bond network between the AMP molecule and the split aptamer. rn

Modeling and simulation of fibrinogen and its adsorption behavior

In this thesis different approaches for the modeling and simulation of the blood protein fibrinogen are presented. The approaches are meant to systematically connect the multiple time and length scales involved in the dynamics of fibrinogen in solution and at inorganic surfaces. The first part of the thesis will cover simulations of fibrinogen on an all atom level. Simulations of the fibrinogen protomer and dimer are performed in explicit solvent to characterize the dynamics of fibrinogen in solution. These simulations reveal an unexpectedly large and fast bending motion that is facilitated by molecular hinges located in the coiled-coil region of fibrinogen. This behavior is characterized by a bending and a dihedral angle and the distribution of these angles is measured. As a consequence of the atomistic detail of the simulations it is possible to illuminate small scale behavior in the binding pockets of fibrinogen that hints at a previously unknown allosteric effect. In a second step atomistic simulations of the fibrinogen protomer are performed at graphite and mica surfaces to investigate initial adsorption stages. These simulations highlight the different adsorption mechanisms at the hydrophobic graphite surface and the charged, hydrophilic mica surface. It is found that the initial adsorption happens in a preferred orientation on mica. Many effects of practical interest involve aggregates of many fibrinogen molecules. To investigate such systems, time and length scales need to be simulated that are not attainable in atomistic simulations. It is therefore necessary to develop lower resolution models of fibrinogen. This is done in the second part of the thesis. First a systematically coarse grained model is derived and parametrized based on the atomistic simulations of the first part. In this model the fibrinogen molecule is represented by 45 beads instead of nearly 31,000 atoms. The intra-molecular interactions of the beads are modeled as a heterogeneous elastic network while inter-molecular interactions are assumed to be a combination of electrostatic and van der Waals interaction. A method is presented that determines the charges assigned to beads by matching the electrostatic potential in the atomistic simulation. Lastly a phenomenological model is developed that represents fibrinogen by five beads connected by rigid rods with two hinges. This model only captures the large scale dynamics in the atomistic simulations but can shed light on experimental observations of fibrinogen conformations at inorganic surfaces.

Applications of GIS and remote sensing techniques for studying the housing patterns in Cairo Governorate

The main objective of this study is to reveal the housing patterns in Cairo as one of the most rapidly urbanizing city in the developing world. The study outlines the evolution of the housing problem and its influencing factors in Egypt generally and in Cairo specifically. The study takes into account the political transition from the national state economy to the open door policy, the neo-liberal period and finally to the housing situation after the January 2011 Revolution. The resulting housing patterns in Cairo Governorate were identified as (1) squatter settlements, (2) semi-informal settlements, (3) deteriorated inner pockets, and (4) formal settlements. rnThe study concluded that the housing patterns in Cairo are reflecting a multifaceted problem resulting in: (1) the imbalance between the high demand for affordable housing units for low-income families and the oversupply of upper-income housing, (2) the vast expansion of informal areas both on agricultural and desert lands, (3) the deterioration of the old parts of Cairo without upgrading or appropriate replacement of the housing structure, and (4) the high vacancy rate of newly constructed apartmentsrnThe evolution and development of the current housing problem were attributed to a number of factors. These factors are demographic factors represented in the rapid growth of the population associated with urbanization under the dictates of poverty, and the progressive increase of the prices of both buildable land and building materials. The study underlined that the current pattern of population density in Cairo Governorate is a direct result of the current housing problems. Around the depopulation core of the city, a ring of relatively stable areas in terms of population density has developed. Population densification, at the expense of the depopulation core, is characterizing the peripheries of the city. The population density in relation to the built-up area was examined using Landsat-7 ETM+ image (176/039). The image was acquired on 24 August 2006 and considered as an ideal source for land cover classification in Cairo since it is compatible with the population census 2006.rnConsidering that the socio-economic setting is a driving force of change of housing demand and that it is an outcome of the accumulated housing problems, the socio-economic deprivations of the inhabitants of Cairo Governorate are analyzed. Small administrative units in Cairo are categorized into four classes based on the Socio-Economic Opportunity Index (SEOI). This index is developed by using multiple domains focusing on the economic, educational and health situation of the residential population. The results show four levels of deprivation which are consistent with the existing housing patterns. Informal areas on state owned land are included in the first category, namely, the “severely deprived” level. Ex-formal areas or deteriorated inner pockets are characterized as “deprived” urban quarters. Semi-informal areas on agricultural land concentrate in the third category of “medium deprived” settlements. Formal or planned areas are included mostly in the fourth category of the “less deprived” parts of Cairo Governorate. rnFor a better understanding of the differences and similarities among the various housing patterns, four areas based on the smallest administrative units of shiakhat were selected for a detailed study. These areas are: (1) El-Ma’desa is representing a severely deprived squatter settlement, (2) Ain el-Sira is an example for an ex-formal deprived area, (3) El-Marg el-Qibliya was selected as a typical semi-informal and medium deprived settlement, and (4) El-Nozha is representing a formal and less deprived area.rnThe analysis at shiakhat level reveals how the socio-economic characteristics and the unregulated urban growth are greatly reflected in the morphological characteristics of the housing patterns in terms of street network and types of residential buildings as well as types of housing tenure. It is also reflected in the functional characteristics in terms of land use mix and its degree of compatibility. It is concluded that the provision and accessibility to public services represents a performance measure of the dysfunctional structure dominating squatter and semi-informal settlements on one hand and ample public services and accessibility in formal areas on the other hand.rn

Clinical and microbiological findings at sites treated with orthodontic fixed appliances in adolescents

INTRODUCTION: Fixed orthodontic appliances can alter the subgingival microbiota. Our aim was to compare the subgingival microbiota and clinical parameters in adolescent subjects at sites of teeth treated with orthodontic bands with margins at (OBM) or below the gingival margin (OBSM), or with brackets (OBR). METHODS: Microbial samples were collected from 33 subjects (ages, 12-18 years) in treatment more than 6 months. The microbiota was assessed by the DNA-DNA checkerboard hybridization method. RESULTS: Bacterial samples were taken from 83 OBR,103 OBSM, and 54 OBM sites. Probing pocket depths differed by orthodontic type (P <0.001) with mean values of 2.9 mm (SD, 0.6) at OBSM sites, 2.5 mm (SD, 0.6) at OBM sites, and 2.3 mm (SD, 0.5) at OBR sites. Only Actinomyces israelii (P <0.001) and Actinomyces naeslundii (P <0.001) had higher levels at OBR sites, whereas Neisseria mucosa had higher levels at sites treated with OBSM or OBM (P <0.001). Aggregatibacter actinomycetemcomitans was found in 25% of sites independent of the appliance. CONCLUSIONS: Different types of orthodontic appliances cause minor differences in the subgingival microbiota (A israelii and A naeslundii) and higher levels at sites treated with orthodontic brackets. More sites with bleeding on probing and deeper pockets were found around orthodontic bands.

Prospective clinical study evaluating the long-time adjunctive use of chlorhexidine after one-stage full-mouth SRP

OBJECTIVES: Scaling and root planing are the causal procedure in the treatment of periodontitis. Many attempts have been made to improve the outcome. The aim of this study was to verify the influence of the extended use of chlorhexidine after one-stage full-mouth (FM) SRP in patients with chronic periodontitis on the clinical outcome after 3 months. METHODS: Eighty-one patients with pockets > or =5 mm were treated by FM. All patients rinsed additionally with 0.2% chlorhexidine (CHX) twice daily over 3 months. Plaque index, bleeding on probing, probing depth (PD) and clinical attachment level (CAL) were recorded at baseline and after 1 and 3 months. RESULTS: In the test group, all variables were significantly improved after 1 and 3 months. Mean reduction of PD and CAL gain was 2.25 +/- 1.08 and 1.67 +/- 1.08 after 1 and 2.99 +/- 1.11 and 2.33 +/- 1.31 after 3 months respectively. CONCLUSIONS: Over 3 months of extended use of CHX mouth rinse after SRP showed slightly but statistically significant better results.

A residue close to ?1 loop F disrupts modulation of GABAA receptors by benzodiazepines while their binding is maintained

Benzodiazepines act at the major isoforms of GABA type A receptors where they potentiate the current evoked by the agonist GABA. The underlying mechanism of this potentiation is poorly understood, but hypothesized to be related to the mechanism that links agonist binding to channel opening in these ligand activated ion channels. The loop F of the ?(1) and the ?(2) subunit have been implicated in channel gating, and loop F of the ?(2) subunit in the modulation by benzodiazepines. We have identified the conservative point mutation Y168F located N-terminally of loop F in the ?(1) subunit that fails to affect agonist properties. Interestingly, it disrupts modulation by benzodiazepines, but leaves high affinity binding to the benzodiazepine binding site intact. Modulation by barbiturates and neurosteroids is also unaffected. Residue ?(1) Y168 is not located either near the binding pockets for GABA, or for benzodiazepines, or close to the loop F of the ?(2) subunit. Our results support the fact, that broader regions of ligand gated receptors are conformationally affected by the binding of benzodiazepines. We infer that also broader regions could contribute to signaling from GABA agonist binding to channel opening.

Comparison of gingival crevicular fluid sampling methods in patients with severe chronic periodontitis

The analysis of samplings from periodontal pockets is important in the diagnosis and therapy of periodontitis. In this study, three different sampling techniques were compared to determine whether one method yielded samples suitable for the reproducible and simultaneous determination of bacterial load, cytokines, neutrophil elastase, and arginine-specific gingipains (Rgps). Rgps are an important virulence factor of Porphyromonas gingivalis, the exact concentration of which in gingival crevicular fluid (GCF) has not been quantified.