Aspectos da furação do titânio 6Al4V com broca de aço rápido sinterizado e broca de metal duro

Pós-graduação em Engenharia Mecânica - FEG

Análise das resistências de embutimento e de compressão para madeiras de pinus e eucalipto

The connections in the wood structures are the places with high concentrations of stresses and therefore are more fragile than the rest of the structure. The connections between pieces of wood can be made by metal pins (nails or screws). The compression and embedment strength has significant influence on the calculation of the connections. The main aim of this work was to evaluate the compression and embedment strength in the directions parallel, inclined at 45° and normal to the grain, using standard specimens according to ABNT NBR 7190/1997 standard. The compression and embedment strength were initially evaluated according to ABNT NBR 7190/1997, which admits the deformation of 2‰ as limit of embedment and the ratio between the ultimate strength and the area of application of load in the specimen for the compressive strength. Afterward, the embedment strength was evaluated by the EUROCEDE 5 /1995 European standard, which use the limit of 5 mm of the displacement for the embedment. Specimens of Pinus oocarpa, Cumaru and Pinus taeda were used in tests to calibration of equipment and specimens of Pinus taeda and Eucalipto citriodora were used to compare the results of strength. The results of strength were evaluated based on statistical analysis. The results of compressive strength for the Pinus taeda showed no significant differences in embedment strength in the directions parallel and normal to the grain. For the Eucalipto citriodora only in the direction parallel to grain the compression strength was not significant compared with the embedment strength. For both species, only the parallel compression strength and inclined at 45o to the grain, which were to the grain, which were admitted the strain of 2‰ were not significantly different compared with the compression strength determined according to ABNT NBR 7190/1997. The normal compression strength obtained according to ABNT NBR 7190/1997 and ultimate compression strength not ...

Influência do uso de hipoclorito de sódio 2,5% e extrato glicólico de sálvia 20% durante o preparo biomecânico sobre a resistência adesiva de retentores intra- radiculares: avaliação através do teste de push-out

The aim of this study it was to evaluate the use of irrigating solution used during root canal preparation on the adhesive cementation of prefabricated fiberglass pins. The bond strength between different regions of the root and the fiberglass pins cemented into the root canal were evaluated by push-out assay. For this study, 36 human teeth were used, all equally prepared. The irrigating solutions used for biomechanical preparation were: saline solution, sodium hypochlorite 2,5% and glycolic extract of salvia 20%. The dual cure resin cement was used for cementation of pins. After cementation, specimens were sectioned to give 3 slices of approximately 2 mm each (cervical, middle and apical), which were submitted to mechanical push-out test. Were performed ANOVA and Tukey's test with a significance level of 5%, for the analysis of mechanical test. Comparing the thirds we observed that the only solution that presented statistical difference in the bond strength was sodium hypochlorite, which showed higher values for the middle and apical third compared with the cervical third, but when compared without taking into consideration the dental thirds, solutions studied showed no differences in bond strength. Therefore, it was concluded that the solutions studied can be used during endodontic treatment without causing harmful effects on the final adhesive restoration

Arte & jóia: uma análise da joalheria contemporânea brasileira

Since the beginning human needs to produce elements artistics, in such way that can set their history and pass a language, be it as art, culture and / or as an identity. Within this context, the jewelry was being developed, its characteristics and aesthetics, in a period, being artistic, historic, marking this form a civilization, a document, with its innovations and concepts. Nowadays, with technology, trade and the need to search for creations and innovations in the jewelry section, was prepared and developed those that we call Art jewelry. This study brings a trajectory through the history of jewelry art and jewelry; specifying in the contemporary period the various types of jewelry such as author and industry, its artists and jewelers; parts exhibited in museums and designed for competitions, thus creating a analysis of contemporary jewelry

Procedimentos para a formulação da estratégia competitiva de empresas

Pós-graduação em Engenharia Mecânica - FEG

Visão contemporânea sobre pinos anatômicos

As an alternative to improve the adaptation of prefabricated posts in flared canals and weakened roots, the option is for relining prefabricated pin, known as a technique of anatomical post. This technique, which can be made with composite resin increases the adjustment post to the walls of the canal and reduces the cementing line, causing the retaining post is less dependent on the mechanical properties of the cementing agent. This article aims to provide an overview of anatomical posts, specifically in the last two decades, based on studies extracted from Scielo, Scopus and Pubmed, referring to the following terms of MeSH Data Base: custom made fiber post, indirect fiber glass posts, root canal therapy and post and core tecnique. According to the literature review in this article, it can be concluded that this technique has been used by several authors and has been shown effective and promising, it creates an individualized retainer with better adaptation and decreased mechanical imbrication cementing line .

Pinos transcorticais e gesso associados à aplicação local de plasma rico em plaquetas no tratamento de fratura do III metatarsiano em potro

In horses less than one year of age fractures of the third metacarpal bone (McIII) or metatarsal bone III (MtIII) are mainly attributed to trauma. Open reduction and internal fixation are the most common treatment method. A Quarter Horse filly with three months of age, which weighed 150kg presented a diaphyseal multifragmentar wedge fracture of right MtIII which was treated with transcortical pins and cast, associated with intralesional application of platelet rich plasma (PRP). After two years of surgery, the animal initiated a training program for racing, and six months later, the patient ran its first official match. The choice of therapeutic methods for treating fractures in horses should be one that provides an earlier repair and minor possibility of complications. Thus, the therapy association which was adopted was considered favorable, since allowed full reestablishment of locomotion of the patient and made possible its return to race.

Functional neurologic recovery in two dogs diagnosed with severe luxation of the vertebral column

Traumatic injuries to the vertebral column, spinal cord, and cauda equina nerve roots occur frequently in human and veterinary medicine and lead to devastating consequences. Complications include partial or complete loss of motor, sensory, and visceral functions, which are among the main causes of euthanasia in dogs. The present case report describes neurological functional recovery in two dogs that were treated surgically for severe spinal fracture and vertebral luxation. In the first case, a stray, mixed breed puppy was diagnosed with thoracolumbar syndrome and Schiff-Scherrington posture, as well as a T13 caudal epiphyseal fracture with 100% luxation between vertebrae T13 and L1; despite these injuries, the animal did show deep pain sensation in the pelvic limbs. Decompression through hemilaminectomy and spinal stabilization with vertebral body pins and bone cement were performed, and the treatment was supplemented with physiotherapy and acupuncture. In the second case, a mixed breed dog was diagnosed with a vertebral fracture and severe luxation between L6 and L7 after a vehicular trauma, but maintained nociception and perineal reflex. Surgical stabilization of the spine was performed using a modified dorsal segmental fixation technique Both patients showed significant recovery of neurological function. Complete luxation of the spinal canal observed radiographically does not mean a poor prognosis, and in some cases, motor, sensory, and visceral functions all have the potential for recovery. In the first case the determining factor for good prognosis was the presence of deep pain perception, and in the second case the prognosis was determined by the presence of sensitivity and anal sphincter tone during the initial neurological examination.

Caracterização microestrutural e propriedades mecânicas em pinos para transmissão mecânica de aço inoxidável martensítico e pinos fusíveis de latão em chave de alta tensão

Pós-graduação em Engenharia Mecânica - FEB

As aglomerações produtivas de calçados, folheados e de jóias do CRAJUBAR (CE): formação, produção, trabalho, implicações socioespaciais

Pós-graduação em Geografia - IGCE

Avaliação dos fatores críticos para a seleção e aplicação clínica dos pinos de fibra: relato de caso cliínico

Teeth that have lost much of their coronal tooth structure need intraradical devices to achieve a desired retention of the restorative material, restoring aesthetics and function to the patient. For this purpose, various types of intracanal posts have been studied, of wich the fiber posts have been highlighted with its increasing use in the dental market. The purpose of this study was to present a clinical case of using fiberglass post. As well as critically analyze the published works and points of controversy described by different authors related to factors such as different protocols cementation, surface treatments pins, fracture toughness and compression, the possibility of microleakage, diameter and length of the pin, and the various materials used in conjunction with the intracanal retainers. Thus, we concluded that fiber posts showed as an excellent alternative for anterior teeth, since have least 2 mm of tooth remaining.

Arte & jóia: uma análise entre as jóias como objeto de arte e a arte contemporânea

More than seven thousand years of jewelry and track social progress, cultural and religious history of man, which always sought to produce objects to decorate and entice; satisfying their desires, building an art and meanings within their time. It experiencing these possible adornments that jewelry was being developed, each with its own characteristics and peculiarities. Currently, with the technology, trade and the need to search for new creations and concepts in the field jewelry, was prepared and developed those what we call art jewelry. This article specifies the time that they were the jewels of the author and tender and makes an analysis between jewelry as art and contemporary art.

O uso místico da jóia: amuletos de proteção infantil no século XVII

Since the beginning of time man has used body ornaments, often-simple element of decoration, passing by the object ritualistic and religious icon, also as a symbol to the demonstration of status and power. Many of these objects have survived to today, but the vast majority is lost in time or was dismantled to reuse the material in new jewelry. The history of jewelry uses the pieces that have survived intact, documents and images of those jewels. This work uses of Visual Arts, more specifically the portrait art of, to analyze the mystical amulets of child`s protection jewel in works of painters Juan Pantoja dela Cruz and Diego Velásquez.

A joalheria no acervo do Museu de Arte Sacra de São Paulo

The jewels, be they used as decorations or some other specific function, are carriers of meaning, representatives of groups, peoples, territories or historical moments. In preliminary studies on the history of Brazilian jewelry, and the recent ascendancy of Brazil in the jewelry market, this research seeks to delve into the history of the production of religious jewelry from São Paulo in the Brazilian colonial period, through the collection of the São Paulo Museum of Sacred Art. This study aims to analyze the museum's collection of jewelry, in two respects: the pieces of jewelry and its pictorial representation in works of art.

ECODESIGN: designers brasileiros de adornos que trabalham com sustentabilidade

The ornaments have always been appreciated by human. And today is obviously the need to include the concepts of ecology in all areas. In this scenario ecodesign becomes a great ally for professionals who work in the making of ornaments, including jewelers. Aiming to decrease and the preservation of noble metals and the use of alternative materials, the ecodesign of adornment makes even more valued and attractive, it promotes sustainable consumption. Based on these concepts, this paper aims to investigate the Brazilian professionals who use sustainable ideas for making your accessories and social work related to this activity.