The role of complexity metrics in a multi-institutional dosimetry audit of VMAT

OBJECTIVE: To demonstrate the benefit of complexity metrics such as the modulation complexity score (MCS) and monitor units (MUs) in multi-institutional audits of volumetric-modulated arc therapy (VMAT) delivery.

METHODS: 39 VMAT treatment plans were analysed using MCS and MU. A virtual phantom planning exercise was planned and independently measured using the PTW Octavius(®) phantom and seven29(®) 2D array (PTW-Freiburg GmbH, Freiburg, Germany). MCS and MU were compared with the median gamma index pass rates (2%/2 and 3%/3 mm) and plan quality. The treatment planning systems (TPS) were grouped by VMAT modelling being specifically designed for the linear accelerator manufacturer's own treatment delivery system (Type 1) or independent of vendor for VMAT delivery (Type 2). Differences in plan complexity (MCS and MU) between TPS types were compared.

RESULTS: For Varian(®) linear accelerators (Varian(®) Medical Systems, Inc., Palo Alto, CA), MCS and MU were significantly correlated with gamma pass rates. Type 2 TPS created poorer quality, more complex plans with significantly higher MUs and MCS than Type 1 TPS. Plan quality was significantly correlated with MU for Type 2 plans. A statistically significant correlation was observed between MU and MCS for all plans (R = -0.84, p < 0.01).

CONCLUSION: MU and MCS have a role in assessing plan complexity in audits along with plan quality metrics. Plan complexity metrics give some indication of plan deliverability but should be analysed with plan quality.

ADVANCES IN KNOWLEDGE: Complexity metrics were investigated for a national rotational audit involving 34 institutions and they showed value. The metrics found that more complex plans were created for planning systems which were independent of vendor for VMAT delivery.

Neurology assessment by objective structured video examination (OSVE)

Summary
Background
The ability to carry out a neurological examination and make an appropriate differential diagnosis is one of the mainstays of our final Bachelor of Medicine (MB) exam; however, with the introduction of objective structured clinical examinations (OSCEs) it has become impossible to arrange for adequate numbers of suitable real patients to participate in the exam.

Context
It is vital that newly qualified doctors can perform a basic neurological examination, interpret the physical signs and formulate a differential diagnosis.

It is vital that newly qualified doctors can perform a basic neurological examination

Innovation
Since 2010 we have introduced an objective structured video examination (OSVE) of a neurological examination of a real patient as part of our final MB OSCE exam. The students view clips of parts of the examination process. They answer questions on the signs that are demonstrated and formulate a differential diagnosis.

Implications
This type of station is logistically a lot easier to organise than a large number of real patients at different examination sites. The featured patients have clearly demonstrated signs and, as every student sees the same patient, are perfectly standardised. It is highly acceptable to examiners and performed well as an assessment tool. There are, however, certain drawbacks in that we are not examining the student's examination technique or their interaction with the patient. Also, certain signs, in particular the assessment of muscle tone and power, are more difficult for a student to estimate in this situation

Rapid, objective detection of cataract-induced blur using a bull's eye photodetector.

PURPOSE: To determine whether optical aberrations caused by cataract can be detected and quantified objectively using a newly described focus detection system (FDS). SETTING: The Wilmer Opthalmological Institute, The Johns Hopkins University School of Medicine, Baltimore, Maryland, USA. METHODS: The FDS uses a bull's eye photodetector to measure the double-pass blur produced from a point source of light. To determine the range and level of focus, signals are measured with a series of trial lenses in the light path selected to span the point of best focus to generate focus curves. The best corrected visual acuity (BCVA), refractive error, lens photograph grades, and FDS signals were obtained in 18 patients scheduled to have cataract surgery. The tests were repeated 6 weeks after surgery. RESULTS: The mean FDS outcome measures improved after cataract surgery, with increased peak height (P=.001) and decreased peak width (P=.001). Improvement in signal strength (integral of signal within +/-1.5 diopters of the point of best focus) strongly correlated with improvement in peak height (R(2)=.88, P<.0001) and photographic cataract grade (R(2)=.72, P<.0001). The mean BCVA improved from 20/50 to 20/26 (P<.0001). The improvement in BCVA correlated more closely with FDS signal strength (R(2)=.44, P=.001) than with cataract grade (R(2)=.25, P=.06). CONCLUSIONS: Improvement in FDS outcome measures correlated with cataract severity and improvement in visual acuity. This objective approach may be useful in long-term studies of cataract progression.

Economic, environmental and mixed objective functions in non-linear process optimization using simulated annealing and tabu search

Screening of topologies developed by hierarchical heuristic procedures can be carried out by comparing their optimal performance. In this work we will be exploiting mono-objective process optimization using two algorithms, simulated annealing and tabu search, and four different objective functions: two of the net present value type, one of them including environmental costs and two of the global potential impact type. The hydrodealkylation of toluene to produce benzene was used as case study, considering five topologies with different complexities mainly obtained by including or not liquid recycling and heat integration. The performance of the algorithms together with the objective functions was observed, analyzed and discussed from various perspectives: average deviation of results for each algorithm, capacity for producing high purity product, screening of topologies, objective functions robustness in screening of topologies, trade-offs between economic and environmental type objective functions and variability of optimum solutions.

A multi-objective approach for the motion planning of redundant manipulators

Kinematic redundancy occurs when a manipulator possesses more degrees of freedom than those required to execute a given task. Several kinematic techniques for redundant manipulators control the gripper through the pseudo-inverse of the Jacobian, but lead to a kind of chaotic inner motion with unpredictable arm configurations. Such algorithms are not easy to adapt to optimization schemes and, moreover, often there are multiple optimization objectives that can conflict between them. Unlike single optimization, where one attempts to find the best solution, in multi-objective optimization there is no single solution that is optimum with respect to all indices. Therefore, trajectory planning of redundant robots remains an important area of research and more efficient optimization algorithms are needed. This paper presents a new technique to solve the inverse kinematics of redundant manipulators, using a multi-objective genetic algorithm. This scheme combines the closed-loop pseudo-inverse method with a multi-objective genetic algorithm to control the joint positions. Simulations for manipulators with three or four rotational joints, considering the optimization of two objectives in a workspace without and with obstacles are developed. The results reveal that it is possible to choose several solutions from the Pareto optimal front according to the importance of each individual objective.

Reformulação de um Sistema de Gestão de Consumos de Energia

Atualmente a energia é considerada um vetor estratégico nas diversas organizações. Assim sendo, a gestão e a utilização racional da energia são consideradas instrumentos fundamentais para a redução dos consumos associados aos processos de produção do sector industrial. As ações de gestão energética não deverão ficar pela fase do projeto das instalações e dos meios de produção, mas sim acompanhar a atividade da Empresa. A gestão da energia deve ser sustentada com base na realização regular de diagnósticos energéticos às instalações consumidoras e concretizada através de planos de atuação e de investimento que apresentem como principal objetivo a promoção da eficiência energética, conduzindo assim à redução dos respetivos consumos e, consequentemente, à redução da fatura energética. Neste contexto, a utilização de ferramentas de apoio à gestão de energia promovem um consumo energético mais racional, ou seja, promovem a eficiência energética e é neste sentido que se insere este trabalho. O presente trabalho foi desenvolvido na Empresa RAR Açúcar e apresentou como principais objetivos: a reformulação do Sistema de Gestão de Consumos de Energia da Empresa, a criação de um modelo quantitativo que permitisse ao Gestor de Energia prever os consumos anuais de água, fuelóleo e eletricidade da Refinaria e a elaboração de um plano de consumos para o ano de 2014 a partir do modelo criado. A reformulação do respetivo Sistema de Gestão de Consumos resultou de um conjunto de etapas. Numa primeira fase foi necessário efetuar uma caraterização e uma análise do atual Sistema de Gestão de Consumos da Empresa, sistema composto por um conjunto de sete ficheiros de cálculo do programa Microsoft Excel©. Terminada a análise, selecionada a informação pertinente e propostas todas as melhorias a introduzir nos ficheiros, procedeu-se à reformulação do respetivo SGE, reduzindo-se o conjunto de ficheiros de cálculo para apenas dois ficheiros, um onde serão efetuados e visualizados todos os registos e outro onde serão realizados os cálculos necessários para o controlo energético da Empresa. O novo Sistema de Gestão de Consumos de Energia será implementado no início do ano de 2015. Relativamente às alterações propostas para as folhas de registos manuais, estas já foram implementadas pela Empresa. Esta aplicação prática mostrou-se bastante eficiente uma vez que permitiu grandes melhorias processuais nomeadamente, menores tempos de preenchimento das mesmas e um encurtamento das rotas efetuadas diariamente pelos operadores. Através do levantamento efetuado aos diversos contadores foi possível identificar todas as áreas onde será necessário a sua instalação e a substituição de todos os contadores avariados, permitindo deste modo uma contabilização mais precisa de todos os consumos da Empresa. Com esta reestruturação o Sistema de Gestão de Consumos tornou-se mais dinâmico, mais claro e, principalmente, mais eficiente. Para a criação do modelo de previsão de consumos da Empresa foi necessário efetuar-se um levantamento dos consumos históricos de água, eletricidade, fuelóleo e produção de açúcar de dois anos. Após este levantamento determinaram-se os consumos específicos de água, fuelóleo e eletricidade diários (para cada semana dos dois anos) e procedeu-se à caracterização destes consumos por tipo de dia. Efetuada a caracterização definiu-se para cada tipo de dia um consumo específico médio com base nos dois anos. O modelo de previsão de consumos foi criado com base nos consumos específicos médios dos dois anos correspondentes a cada tipo de dia. Procedeu-se por fim à verificação do modelo, comparando-se os consumos obtidos através do modelo (consumos previstos) com os consumos reais de cada ano. Para o ano de 2012 o modelo apresenta um desvio de 6% na previsão da água, 12% na previsão da eletricidade e de 6% na previsão do fuelóleo. Em relação ao ano de 2013, o modelo apresenta um erro de 1% para a previsão dos consumos de água, 8% para o fuelóleo e de 1% para a eletricidade. Este modelo permitirá efetuar contratos de aquisição de energia elétrica com maior rigor o que conduzirá a vantagens na sua negociação e consequentemente numa redução dos custos resultantes da aquisição da mesma. Permitirá também uma adequação dos fluxos de tesouraria à necessidade reais da Empresa, resultante de um modelo de previsão mais rigoroso e que se traduz numa mais-valia financeira para a mesma. Foi também proposto a elaboração de um plano de consumos para o ano de 2014 a partir do modelo criado em função da produção prevista para esse mesmo ano. O modelo apresenta um desvio de 24% na previsão da água, 0% na previsão da eletricidade e de 28% na previsão do fuelóleo.

Kaizen como filosofia de melhoria contínua na direção de serviços administrativos da SONAE

Com as atuais exigências do mercado, as empresas têm de dar respostas cada vez mais rigorosas aos clientes, como entregas mais regulares e quantidades mais reduzidas, preços mais baixos e tempos de resposta e entregas menores. Processos e produtos mais flexíveis e inovadores são a chave para a sobrevivência e sucesso de muitas empresas: cumprindo os prazos, aumentando a produtividade dos processos, respondendo rapidamente às necessidades do mercado, reduzindo o stock em toda a cadeia, reduzindo tempo e custos operacionais e integrando todas as estruturas de forma a facilitar a troca de informação, refere Russel e Taylor III, (2003). Nos últimos anos temos assistido a uma constante mudança cultural nas empresas, onde a motivação e o desempenho dos seus colaboradores são tidos como essenciais. No grupo SONAE, as práticas existentes continuam a orientar para uma cultura verdadeiramente inovadora. A implementação da metodologia Kaizen foi uma autêntica revolução em que foram desenvolvidas inúmeras ideias, assentando numa forte mudança cultural. O presente estudo pretende clarificar todo o processo de melhoria contínua através da implementação de ferramentas que lhe estão associadas, bem como as auditorias a esses mesmos procedimentos. Cada vez mais, são identificadas estratégias de melhoria contínua baseadas na filosofia Kaizen como forma de fazer face aos novos desafios. Com a implementação do Kaizen, este projeto terá como principal objetivo averiguar se os funcionários estão a obter resultados positivos nas suas funções diárias, bem como nas tarefas em conjunto com os colegas da sua equipa ou de outras equipas. Assim surge o interesse de um estudo de caso realizado na Direção de Serviços Administrativos da SONAE.

Caracterização das estruturas de qualidade e segurança do doente

RESUMO - Título: “Caracterização das Estruturas de Qualidade e Segurança do Doente” A segurança dos doentes assume-se, hoje em dia, como prioridade máxima e é um paradigma de qualidade dos cuidados de saúde. Definida como um conjunto de medidas destinadas a melhorar a segurança e a qualidade de prestação de cuidados de saúde, surge a gestão de risco. Assim, um programa de gestão de risco poderá ser definido como um conjunto de procedimentos e de objetivos pré-definidos com o intuito de promover uma cultura de segurança no seio das organizações de saúde. A nível nacional, no processo de busca da excelência, é necessário estabelecer exigências que formalizem os mecanismos que as instituições de saúde e os seus profissionais terão que utilizar para assegurar que os cuidados de saúde que prestam aos cidadãos, respondem aos critérios da qualidade definidos pelo Departamento da Qualidade na Saúde. Tornou-se, então, pertinente verificar as estratégias que existem sobre a gestão de risco, a nível nacional, e por outro lado, como é que as unidades de saúde têm estruturada esta área nas suas organizações. Como tal, com este estudo pretendeu-se caracterizar as Estruturas de Qualidade e Segurança do Doente, tendo como população as unidades de saúde da região de Lisboa e Vale do Tejo. Foi utilizada uma abordagem metodológica do tipo observacional descritiva, que integrou a aplicação de um questionário. De forma geral, foi possível concluir que todas as unidades de saúde (N=7) afirmam ter implementada a gestão do risco, no entanto há unidades que não fazem a avaliação e identificação do risco (N=4) e a maioria não realizam auditorias clínicas regularmente (N=5). Considera-se que estes resultados podem contribuir para a criação de oportunidades para as organizações e para os profissionais, com o objetivo de melhorar a prestação de cuidados, com consequente melhoria na segurança do doente.

Objective analysis of gait coordination for total knee arthroplasty outcome

Introduction: Coordination is a strategy chosen by the central nervous system to control the movements and maintain stability during gait. Coordinated multi-joint movements require a complex interaction between nervous outputs, biomechanical constraints, and pro-prioception. Quantitatively understanding and modeling gait coordination still remain a challenge. Surgeons lack a way to model and appreciate the coordination of patients before and after surgery of the lower limbs. Patients alter their gait patterns and their kinematic synergies when they walk faster or slower than normal speed to maintain their stability and minimize the energy cost of locomotion. The goal of this study was to provide a dynamical system approach to quantitatively describe human gait coordination and apply it to patients before and after total knee arthroplasty. Methods: A new method of quantitative analysis of interjoint coordination during gait was designed, providing a general model to capture the whole dynamics and showing the kinematic synergies at various walking speeds. The proposed model imposed a relationship among lower limb joint angles (hips and knees) to parameterize the dynamics of locomotion of each individual. An integration of different analysis tools such as Harmonic analysis, Principal Component Analysis, and Artificial Neural Network helped overcome high-dimensionality, temporal dependence, and non-linear relationships of the gait patterns. Ten patients were studied using an ambulatory gait device (Physilog®). Each participant was asked to perform two walking trials of 30m long at 3 different speeds and to complete an EQ-5D questionnaire, a WOMAC and Knee Society Score. Lower limbs rotations were measured by four miniature angular rate sensors mounted respectively, on each shank and thigh. The outcomes of the eight patients undergoing total knee arthroplasty, recorded pre-operatively and post-operatively at 6 weeks, 3 months, 6 months and 1 year were compared to 2 age-matched healthy subjects. Results: The new method provided coordination scores at various walking speeds, ranged between 0 and 10. It determined the overall coordination of the lower limbs as well as the contribution of each joint to the total coordination. The difference between the pre-operative and post-operative coordination values were correlated with the improvements of the subjective outcome scores. Although the study group was small, the results showed a new way to objectively quantify gait coordination of patients undergoing total knee arthroplasty, using only portable body-fixed sensors. Conclusion: A new method for objective gait coordination analysis has been developed with very encouraging results regarding the objective outcome of lower limb surgery.

A Multi-Objective Genetic Algorithm with Side Effect Machines for Motif Discovery

Understanding the machinery of gene regulation to control gene expression has been one of the main focuses of bioinformaticians for years. We use a multi-objective genetic algorithm to evolve a specialized version of side effect machines for degenerate motif discovery. We compare some suggested objectives for the motifs they find, test different multi-objective scoring schemes and probabilistic models for the background sequence models and report our results on a synthetic dataset and some biological benchmarking suites. We conclude with a comparison of our algorithm with some widely used motif discovery algorithms in the literature and suggest future directions for research in this area.

Investigation of the Relationship between Sexual Orientation and Objective Height, along with Predictors of Height Distortion

Studies that have used mostly self-reported height have found that men with a same-sex orientation and women with an other-sex orientation are shorter, on average, than men with an other-sex orientation and women with a same-sex orientation, respectively. This thesis examined whether an objective height difference exists or whether a psychosocial account (e.g., distortion of self-reports) may explain these putative height differences. Also, this thesis examined whether certain individual differences (e.g, gender roles and socially desirable responding) predict height distortion. Eight hundred and thirteen participants, recruited at Brock University, the Niagara Community and through surrounding LGBT events, completed self-reported height, measures of gender roles and socially desirable responding, and had their height measured. Using hierarchical linear regressions, it was found that Same-Sex/Both-Sex Oriented men were shorter, on average, than predominantly Other-Sex Oriented men; however, there was no difference in objective height between Same-Sex/Both-Sex Oriented women and predominantly Other-Sex Oriented women. These findings contribute to existing biological theories of men's sexual orientation development and do not contribute to biological theories of women's sexual orientation development. Height distortion was not related to sexual orientation and only marginally related to sex. Predictors of height distortion were Impression Management, in both men and women, and Unmitigated Agency, in men. These findings highlight the complexity of sexual orientation development in men and women. These findings also highlight the role of certain psychosocial factors in how people perceive their bodies and/or how they want their bodies to be perceived by others.

Multi-Objective Genetic Algorithms for the Single Allocation Hub Location Problem

Hub Location Problems play vital economic roles in transportation and telecommunication networks where goods or people must be efficiently transferred from an origin to a destination point whilst direct origin-destination links are impractical. This work investigates the single allocation hub location problem, and proposes a genetic algorithm (GA) approach for it. The effectiveness of using a single-objective criterion measure for the problem is first explored. Next, a multi-objective GA employing various fitness evaluation strategies such as Pareto ranking, sum of ranks, and weighted sum strategies is presented. The effectiveness of the multi-objective GA is shown by comparison with an Integer Programming strategy, the only other multi-objective approach found in the literature for this problem. Lastly, two new crossover operators are proposed and an empirical study is done using small to large problem instances of the Civil Aeronautics Board (CAB) and Australian Post (AP) data sets.

The effects of consistency and inconsistency between attentional focus and task objective in learning a golf putting task

Converging evidence has demonstrated learning advantages when an individual is instructed to focus their attention externally. However, many of the motor tasks utilized in past research had clear external objectives (i.e., putting accuracy), creating a compatible relationship between an external focus of attention (i.e., outcome) and an external task objective (i.e., putting accuracy). The present study examined whether or not the consistency of instructions and task objective would differentially impact the acquisition of a golf putting task. Participants performed a putting task in a control condition or in one of four experimental conditions resulting from the factorial interaction of task instructions (internal or external) and task objective (internal or external). The retention and transfer data revealed that participants who received an external task objective demonstrated superior outcome scores. Participants who received technique information paired with outcome information demonstrated superior technique scores.

A Scalability Study and New Algorithms for Large-Scale Many-Objective Optimization

Many real-world optimization problems contain multiple (often conflicting) goals to be optimized concurrently, commonly referred to as multi-objective problems (MOPs). Over the past few decades, a plethora of multi-objective algorithms have been proposed, often tested on MOPs possessing two or three objectives. Unfortunately, when tasked with solving MOPs with four or more objectives, referred to as many-objective problems (MaOPs), a large majority of optimizers experience significant performance degradation. The downfall of these optimizers is that simultaneously maintaining a well-spread set of solutions along with appropriate selection pressure to converge becomes difficult as the number of objectives increase. This difficulty is further compounded for large-scale MaOPs, i.e., MaOPs possessing large amounts of decision variables. In this thesis, we explore the challenges of many-objective optimization and propose three new promising algorithms designed to efficiently solve MaOPs. Experimental results demonstrate the proposed optimizers to perform very well, often outperforming state-of-the-art many-objective algorithms.

Validité de construit d’un test d’évaluation de la stabilité lombo-pelvienne, le soulèvement actif de la jambe tendue (SAJT) version objective

Introduction : L’évaluation clinique du contrôle neuromusculaire des muscles du tronc est criante en réhabilitation et en entraînement. L’objectif principal de cette étude a été d’évaluer la reproductibilité intra et inter-évaluateur d’un test clinique le soulèvement actif de la jambe tendue (SAJT) chez une population active et saine. Méthode : Chaque sujet (18 joueurs de tennis) a été testé à deux reprises par 2 physiothérapeutes avec le SAJT. Résultats : La reproductibilité intra-évaluateur s’est avérée élevée à très élevée (ICC = 0.81 à 0.93) tandis la reproductibilité inter-évaluateur s’est avérée cliniquement non viable. Conclusion : À notre connaissance, le SAJT est le premier test clinique reproductible évaluant le contrôle neuromusculaire du tronc avec des compensations musculaires et cinétiques chez des sujets actifs et sains. Une formation plus importante des évaluateurs aurait certainement amélioré la reproductibilité inter-évaluateur.