Avaliação do potencial mutagênico e bioacumulador de metais pesados de Baccharis trimera Less e Equisetum hyemale L

Pós-graduação em Biociências - FCLAS

Control of white spot lesion adjacent to orthodontic bracket with use of fluoride varnish or chlorhexidine gel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Assessment of a new infrared laser transillumination technology (808nm) for the detection of occlusal caries-an in vitro study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dynamic Features for Iris Recognition

The human eye is sensitive to visible light. Increasing illumination on the eye causes the pupil of the eye to contract, while decreasing illumination causes the pupil to dilate. Visible light causes specular reflections inside the iris ring. On the other hand, the human retina is less sensitive to near infra-red (NIR) radiation in the wavelength range from 800 nm to 1400 nm, but iris detail can still be imaged with NIR illumination. In order to measure the dynamic movement of the human pupil and iris while keeping the light-induced reflexes from affecting the quality of the digitalized image, this paper describes a device based on the consensual reflex. This biological phenomenon contracts and dilates the two pupils synchronously when illuminating one of the eyes by visible light. In this paper, we propose to capture images of the pupil of one eye using NIR illumination while illuminating the other eye using a visible-light pulse. This new approach extracts iris features called "dynamic features (DFs)." This innovative methodology proposes the extraction of information about the way the human eye reacts to light, and to use such information for biometric recognition purposes. The results demonstrate that these features are discriminating features, and, even using the Euclidean distance measure, an average accuracy of recognition of 99.1% was obtained. The proposed methodology has the potential to be "fraud-proof," because these DFs can only be extracted from living irises.

Quantum oscillations of spin polarization in a GaAs/AlGaAs double quantum well

5 We employ the circular-polarization-resolved magnetophotoluminescence technique to probe the spin character of electron and hole states in a GaAs/AlGaAs strongly coupled double-quantum-well system. The photoluminescence (PL) intensities of the lines associated with symmetric and antisymmetric electron states present clear out-of-phase oscillations between integer values of the filling factor. and are caused by magnetic-field-induced changes in the population of occupied Landau levels near to the Fermi level of the system. Moreover, the degree of circular polarization of these emissions also exhibits the oscillatory behavior with increasing magnetic field. Both quantum oscillations observed in the PL intensities and in the degree of polarizations may be understood in terms of a simple single-particle approach model. The k . p method was used to calculate the photoluminescence peak energies and the degree of circular polarizations in the double-quantum-well structure as a function of the magnetic field. These calculations prove that the character of valence band states plays an important role in the determination of the degree of circular polarization and, thus, resulting in a magnetic-field-induced change of the polarization sign.

Carotenoids and polyphenols in nutricosmetics, nutraceuticals, and cosmeceuticals

The market for cosmeceuticals continues with significant annual growth, but today consumers are more aware of nutritional products that contribute to both skin health and disease prevention. In the last 10 years, pharmacists, chemists, nutritionists, and physicians have been working together to develop new nutritional applications to satisfy peoples needs and demands. As a recent result of convergence phenomenon between cosmetics and food industries, nutricosmetics is a blurry area unfamiliar to many consumers and sometimes even to foods and cosmetics experts. Characterized by oral supplementation of nutrients, nutricosmetics are also known as beauty pills,beauty from within, and even oral cosmetics. The major claim is the antiaging effect, reducing wrinkles by fighting free radicals generated by solar radiation. Among the ingredients used in nutricosmetics, antioxidants represent the most crucial. The best-known antioxidants are carotenoids (beta-carotene, lycopene, lutein, zeaxanthin, and astaxanthin) and polyphenols (anthocyanidins, catechins, flavonoids, tannins, and procyanidins). This study presents an overview about the concept of nutricosmetics and gives us information about the difference between nutricosmetics, nutraceuticals, and cosmeceuticals. The article also discusses about carotenoids and polyphenols, two classes of ingredients often employed in such products.

Untersuchungen zum nichtphotochemischen Lochbrennen auf Einzelmolekülebene am Modellsystem Terrylen in p-Terphenyl

Die Arbeit beschreibt Untersuchungen zum nichtphoto- chemischen Lochbrennen, das bei 1.4 Kelvin in Form von rein lichtinduzierten Frequenzsprüngen einzelner in p-Terphenyleingebetteter Terrylenmoleküle beobachtet werden kann. Dabei zeigen alle Chromophore aus der X1-Einbaulage ein exzellent reproduzierbares Verhalten, sowohl im bistabilen primären Photozyklus wie auch in dem daran angegliederten sekundärenPhotozyklus, welcher aus drei weiteren spektralen Positionen besteht. Aus den Ergebnissen der nach der genauen Charakterisierung dieser Eigenschaft des Systems durchgeführten Experimente - Fluoreszenzspektroskopie der Photoprodukte, Stark-Effekt-Messungen und Polarisationsmodulation - wird ein Modell für die den lichtinduzierten Änderungen der Absorptionsfrequenzzugrundeliegenden Konformationsänderungender Wirt/Gast- Struktur abgeleitet und diskutiert. Die mittlerweile verfügbaren Ergebnisse von diesbezüglichen molekular- dynamischen Simulationen einer Theoriegruppe ausBordeaux, die alle grundlegenden Annahmen dieses Modellsbestätigen und eine noch genauere mikroskopische Beschreibung des Systems liefern, werden zur Abrundung der Darstellung ebenfalls vorgestellt. Außerdem geht die Dissertation auf die durchgeführten Einzelmolekül- untersuchungen an Terrylen in p-Terphenyl bei Raumtemperatur ein und stellt das im Rahmen der Arbeit aufgebaute temperaturvariable laserscannende Konfokalmikroskop im Detail vor.

Elektrophysiologische Charakterisierung und PKC-vermittelte Regulation des humanen Transporters für basische Aminosäuren hCAT-1

ZusammenfassungDer humane kationische Aminosäure-Transporter hCAT-1 (CAT für cationic amino acid transporter) gehört zur Familie der Na+- und pH-unabhängigen Transporter für basische Aminosäuren (BAS). Die vorliegende Arbeit befasst sich mit unterschiedlichen Aspekten des hCAT-1-vermittelten Transportes, die in zwei Teilabschnitten behandelt werden. Im ersten Abschnitt wurden die Transporteigenschaften von hCAT-1-exprimierenden X. laevis-Oozyten mit Hilfe von elektrophysiologischen Methoden untersucht und mit denen der Isoformen hCAT-2A und -2B verglichen. Dabei zeigte sich, dass es durch die Expression von hCAT-2A und -2B in Oozyten zur Bildung eines BAS-Potentiales kommt, jedoch nicht durch die Expression von hCAT-1. Hierfür dürfte die hohe Transstimulierbarkeit des hCAT-1-Proteins verantwortlich sein. Obwohl das Membranpotential einer Zelle die Akkumulation von BAS durch die hCAT-Proteine beeinflusst, war bei sehr hohen extrazellulären BAS-Konzentrationen die Akkumulation durch hCAT-1 und -2B im Gegensatz zu hCAT-2A nicht vom Membranpotential abhängig, da unter diesen Bedingungen der Efflux limitierend wirkte. Mit Hilfe der voltage clamp-Methode wurden die L-Arginin-induzierten Maximalströme (Vmax) und die Leitfähigkeiten der hCAT-Proteine bestimmt. Die so ermittelten Vmax-Werte sind nur halb so groß wie die durch Flux-Studien bestimmten. Daher muss von einem Gegentransport an positiver Ladung (Substrat) ausgegangen werden. Weiterhin konnte gezeigt werden, dass die hCAT-Isoformen zwei unterschiedliche Leitfähigkeitszustände für BAS besitzen, die von der intrazellulären BAS-Konzentration abhängig sind. Eine Leitfähigkeitszunahme durch Zugabe von extrazellulärem L-Arginin konnte bei allen hCAT-Isoformen in depletierten Oozyten beobachtet werden. In BAS-beladenen Oozyten führte die Zugabe von L-Arginin dagegen zu keiner (hCAT-1 und hCAT-2B) bzw. zu einer geringen (hCAT-2A) Zunahme der Leitfähigkeit der Transporter. Im Substratgleichgewicht jedoch nahm die Leitfähigkeit der drei untersuchten hCAT-Isoformen in Abhängigkeit von der Substratkonzentration zu. Überraschenderweise wurden für die untersuchten hCAT-Isoformen Leck-Ströme in Abwesenheit von BAS nachgewiesen. An hCAT-2B-exprimierenden Oozyten wurde eine erhöhte Leitfähigkeit für K+-Ionen gezeigt. Die physiologische Bedeutung dieser Kanalfunktion ist jedoch noch völlig ungeklärt. Im zweiten Abschnitt wurde der Mechanismus der Proteinkinase C (PKC)-vermittelten Inhibition der hCAT-1-Transportaktivität untersucht. Hierfür wurden hCAT-1.EGFP-Konstrukte in Oozyten und in U373MG Glioblastom-Zellen exprimiert. Mit Hilfe konfokaler Mikroskopie und Western-Blot-Analysen von biotinylierten Zelloberflächen-Proteinen wurde gezeigt, dass die PKC-vermittelte Reduktion der hCAT-1-Transportaktivität auf einer Reduktion der hCAT-Expression an der Zelloberfläche beruht. Ähnliche Ergebnisse wurden auch mit dem endogen in humanen DLD-1 Kolonkarzinom-Zellen exprimierten hCAT-1 erzielt. Der PKC-Effekt war auch noch nach Entfernung der putativen PKC-Erkennungsstellen am hCAT-1-Protein vorhanden. Daher reguliert die PKC die hCAT-1-Transportaktivität vermutlich über einen indirekten Mechanismus, d. h. nicht über eine direkte Phosphorylierung des hCAT-1-Proteins. Die Veränderung der Zelloberflächenexpression stellt einen neuen Regulationsmechanismus für die CAT-Proteine dar, der erklären kann, warum sich Modifikationen in der CAT-Proteinexpression oft nicht in entsprechenden Veränderungen der Transportaktivität widerspiegeln.

The coupling between electron transfer and Protein/Solvent Dynamics in Photosynthetic Reaction Centers: Spectroscopic Studies in Amorphous Matrices

We investigated at the molecular level protein/solvent interactions and their relevance in protein function through the use of amorphous matrices at room temperature. As a model protein, we used the bacterial photosynthetic reaction center (RC) of Rhodobacter sphaeroides, a pigment protein complex which catalyzes the light-induced charge separation initiating the conversion of solar into chemical energy. The thermal fluctuations of the RC and its dielectric conformational relaxation following photoexcitation have been probed by analyzing the recombination kinetics of the primary charge-separated (P+QA-) state, using time resolved optical and EPR spectroscopies. We have shown that the RC dynamics coupled to this electron transfer process can be progressively inhibited at room temperature by decreasing the water content of RC films or of RC-trehalose glassy matrices. Extensive dehydration of the amorphous matrices inhibits RC relaxation and interconversion among conformational substates to an extent comparable to that attained at cryogenic temperatures in water-glycerol samples. An isopiestic method has been developed to finely tune the hydration level of the system. We have combined FTIR spectral analysis of the combination and association bands of residual water with differential light-minus-dark FTIR and high-field EPR spectroscopy to gain information on thermodynamics of water sorption, and on structure/dynamics of the residual water molecules, of protein residues and of RC cofactors. The following main conclusions were reached: (i) the RC dynamics is slaved to that of the hydration shell; (ii) in dehydrated trehalose glasses inhibition of protein dynamics is most likely mediated by residual water molecules simultaneously bound to protein residues and sugar molecules at the protein-matrix interface; (iii) the local environment of cofactors is not involved in the conformational dynamics which stabilizes the P+QA-; (iv) this conformational relaxation appears to be rather delocalized over several aminoacidic residues as well as water molecules weakly hydrogen-bonded to the RC.

Chemie an funktionalen Polymer-Opalen

In dieser Arbeit wird die Herstellung und Anwendung von funktionalen Polymer-Opalen beschrieben. Für die Synthese von funktionalen monodipsersen Kolloiden, den Bausteinen der Opale, wird die emulgatorfreie Emulsionspolymerisation (SFEP) verwendet. Je nach einzubauendem funktionalem Molekül werden verschiedene Varianten der SFEP verwendet, wie z. B. Homopolymerisation, Copolymerisation, Polymerisation mit Fremdstoffen und die Herstellung von Kern-Schale-Kolloiden. Die so hergestellten monodispersen Kolloide formen durch Selbstorganisation über horizontale (Aufpipettieren, Rakeln, Sprühen) oder vertikale Kristallisation (Ziehmaschine)hochqualitative künstliche Opale. Die eingebauten Funktionalitäten öffnen den Weg zu einer Vielzahl von Anwendungen. Über die Spaltung von funktionalen Estergruppen kann eine lichtinduzierte Strukturierung durchgeführt werden. Der Einbau von Epoxidgruppen ermöglicht eine makroskopische Vernetzung wodurch die mechanische Stabilität der Struktur erhöht wird. Der Einsatz von Reaktivestern kann zur Oberflächen- funktionalisierung verwendet werden. Durch Replizierung der Struktur zum inversen Opal können weitere funktionale Materialien eingeführt werden, was die Einsatzmöglichkeiten noch erweitert.

Electrical scanning probe microscopy on organic optoelectronic structures

In the field of organic optoelectronics, the nanoscale structure of the materials has huge im-pact on the device performance. Here, scanning force microscopy (SFM) techniques become increasingly important. In addition to topographic information, various surface properties can be recorded on a nanometer length scale, such as electrical conductivity (conductive scanning force microscopy, C-SFM) and surface potential (Kelvin probe force microscopy, KPFM).rnrnIn the context of this work, the electrical SFM modes were applied to study the interplay be-tween morphology and electrical properties in hybrid optoelectronic structures, developed in the group of Prof. J. Gutmann (MPI-P Mainz). In particular, I investigated the working prin-ciple of a novel integrated electron blocking layer system. A structure of electrically conduct-ing pathways along crystalline TiO2 particles in an insulating matrix of a polymer derived ceramic was found and insulating defect structures could be identified. In order to get insights into the internal structure of a device I investigated a working hybrid solar cell by preparing a cross cut with focused ion beam polishing. With C-SFM, the functional layers could be identified and the charge transport properties of the novel active layer composite material could be studied. rnrnIn C-SFM, soft surfaces can be permanently damaged by (i) tip induced forces, (ii) high elec-tric fields and (iii) high current densities close to the SFM-tip. Thus, an alternative operation based on torsion mode topography imaging in combination with current mapping was intro-duced. In torsion mode, the SFM-tip vibrates laterally and in close proximity to the sample surface. Thus, an electrical contact between tip and sample can be established. In a series of reference experiments on standard surfaces, the working mechanism of scanning conductive torsion mode microscopy (SCTMM) was investigated. Moreover, I studied samples covered with free standing semiconducting polymer nano-pillars that were developed in the group of Dr. P. Theato (University Mainz). The application of SCTMM allowed non-destructive imag-ing of the flexible surface at high resolution while measuring the conductance on individual pillarsrnrnIn order to study light induced electrical effects on the level of single nanostructures, a new SFM setup was built. It is equipped with a laser sample illumination and placed in inert at-mosphere. With this photoelectric SFM, I investigated the light induced response in function-alized nanorods that were developed in the group of Prof. R. Zentel (University Mainz). A block-copolymer containing an anchor block and dye moiety and a semiconducting conju-gated polymer moiety was synthesized and covalently bound to ZnO nanorods. This system forms an electron donor/acceptor interface and can thus be seen as a model system of a solar cell on the nanoscale. With a KPFM study on the illuminated samples, the light induced charge separation between the nanorod and the polymeric corona could not only be visualized, but also quantified.rnrnThe results demonstrate that electrical scanning force microscopy can study fundamental processes in nanostructures and give invaluable feedback to the synthetic chemists for the optimization of functional nanomaterials.rn

Optical interface based on a nanofiber atom-trap

In this thesis, I present the realization of a fiber-optical interface using optically trapped cesium atoms, which is an efficient tool for coupling light and atoms. The basic principle of the presented scheme relies on the trapping of neutral cesium atoms in a two-color evanescent field surrounding a nanofiber. The strong confinement of the fiber guided light, which also protrudes outside the nanofiber, provides strong confinement of the atoms as well as efficient coupling to near-resonant light propagating through the fiber. In chapter 1, the necessary physical and mathematical background describing the propagation of light in an optical fiber is presented. The exact solution of Maxwell’s equations allows us to model fiber-guided light fields which give rise to the trapping potentials and the atom-light coupling in the close vicinity of a nanofiber. Chapter 2 gives the theoretical background of light-atom interaction. A quantum mechanical model of the light-induced shifts of the relevant atomic levels is reviewed, which allows us to quantify the perturbation of the atomic states due to the presence of the trapping light-fields. The experimental realization of the fiber-based atom trap is the focus of chapter 3. Here, I analyze the properties of the fiber-based trap in terms of the confinement of the atoms and the impact of several heating mechanisms. Furthermore, I demonstrate the transportation of the trapped atoms, as a first step towards a deterministic delivery of individual atoms. In chapter 4, I present the successful interfacing of the trapped atomic ensemble and fiber-guided light. Three different approaches are discussed, i.e., those involving the measurement of either near-resonant scattering in absorption or the emission into the guided mode of the nanofiber. In the analysis of the spectroscopic properties of the trapped ensemble we find good agreement with the prediction of theoretical model discussed in chapter 2. In addition, I introduce a non-destructive scheme for the interrogation of the atoms states, which is sensitive to phase shifts of far-detuned fiber-guided light interacting with the trapped atoms. The inherent birefringence in our system, induced by the atoms, changes the state of polarization of the probe light and can be thus detected via a Stokes vector measurement.

Fluctuation spectroscopy of single plasmonic nanostructures

Plasmonic nanoparticles are great candidates for sensing applications with optical read-out. Plasmon sensing is based on the interaction of the nanoparticle with electromagnetic waves where the particle scatters light at its resonance wavelength. This wavelength depends on several intrinsic factors like material, shape and size of the nanoparticle as well as extrinsic factors like the refractive index of the surrounding medium. The latter allows the nanoparticle to be used as a sensor; changes in the proximate environment can be directly monitored by the wavelength of the emitted light. Due to their minuscule size and high sensitivity this allows individual nanoparticles to report on changes in particle coverage.rnrnTo use this single particle plasmon sensor for future sensing applications it has to meet the demand for detection of incidents on the single molecule level, such as single molecule sensing or even the detection of conformational changes of a single molecule. Therefore, time resolution and sensitivity have to be enhanced as today’s measurement methods for signal read-out are too slow and not sensitive enough to resolve these processes. This thesis presents a new experimental setup, the 'Plasmon Fluctuation Setup', that leads to tremendous improvements in time resolution and sensitivity. This is achieved by implementation of a stronger light source and a more sensitive detector. The new setup has a time resolution in the microsecond regime, an advancement of 4-6 orders of magnitude to previous setups. Its resonance wavelength stability of 0.03 nm, measured with an exposure time of 10 ms, is an improvement of a factor of 20 even though the exposure time is 3000 times shorter than in previous reports. Thus, previously unresolvable wavelength changes of the plasmon sensor induced by minor local environmental alteration can be monitored with extremely high temporal resolution.rnrnUsing the 'Plasmon Fluctuation Setup', I can resolve adsorption events of single unlabeled proteins on an individual nanorod. Additionally, I monitored the dynamic evolution of a single protein binding event on a millisecond time scale. This feasibility is of high interest as the role of certain domains in the protein can be probed by a study of modified analytes without the need for labels possibly introducing conformational or characteristic changes to the target. The technique also resolves equilibrium fluctuations in the coverage, opening a window into observing Brownian dynamics of unlabeled macromolecules. rnrnA further topic addressed in this thesis is the usability of the nanoruler, two nanospheres connected with a spacer molecule, as a stiffness sensor for the interparticle linker under strong illumination. Here, I discover a light induced collapse of the nanoruler. Furthermore, I exploit the sensing volume of a fixed nanorod to study unlabeled analytes diffusing around the nanorod at concentrations that are too high for fluorescence correlation spectroscopy but realistic for biological systems. Additionally, local pH sensing with nanoparticles is achieved.

Diblock copolymer - nanocrystal hybrids for optoelectronic applications

Small, smaller, nano - it is a milestone in the development of new materials and technologies. Nanoscience is now present in our daily lives: in the car industry with self-cleaning surfaces, in medicine with cancer therapies, even our clothes and cosmetics utilize nanoparticles. The number and variety of applications has been growing fast in recent years, and the possibilities seem almost infinite. Nanoparticles made of inorganic materials have found applications in new electronic technologies, and organic nanomaterials have been added to resins to produce very strong but light weight materials.rnThis work deals with the combination of organic and inorganic materials for the fabrication of new, functional hybrid systems. For that purpose, block copolymers were made with a long, solubility-enhancing and semiconducting block, and a short anchor block. They were synthesized by either RAFT polymerization or Siegrist polycondensation. For the second block, an active ester was grafted on and subsequently reacted with the anchor molecules in a polymer analogue reaction. The resulting block copolymers had different properties; poly(para-phenylene vinylene) showed self-assembly in organic solvents, which resulted in gelling of the solution. The fibers from a diluted solution were visible through microscopy. When polymer chains were attached to TiO2 nanorods, the hybrids could be integrated into polymer fibers. A light-induced charge separation was demonstrated through KPFM. The polymer charged positively and the charge could travel along the fibers for several hundred nanometers. Polymers made via RAFT polymerization were based on poly(vinyltriphenylamine). Ruthenium chromophores which carried anchor groups were attached to the second block. These novel block copolymers were then attached to ZnO nanorods. A light-induced charge separation was also demonstrated in this system. The ability to disperse inorganic nanoparticles within the film is another advantage of these block copolymers. This was shown with the example of CdSe tetrapods. Poly(vinyltriphenylamine dimer) with disulfide anchor groups was attached to CdSe tetrapods. These four-armed nanoparticles are supposed to show very high charge transport. A polymer without anchor groups was also mixed with the tetrapods in order to investigate the influence of the anchor groups. It was shown that without them no good films were formed and the tetrapods aggregated heavily in the samples. Additionally, a large difference in the film qualities and the aggregation of the tetrapods was found in the sample of the polymer with anchor groups, dependent on the tetrapod arm length and the polymer loading. These systems are very interesting for hybrid solar cells. This work also illustrates similar systems with quantum dots. The influence of the energy level of the polymer on the hole transport from the polymer to the quantum dots, as well as on the efficiency of QLEDs was studied. For this purpose two different polymers were synthesized with different HOMO levels. It was clearly shown that the polymer with the adjusted lower HOMO level had a better hole injection to the quantum dots, which resulted in more efficient light emitting diodes.rnThese systems all have in common the fact that novel, and specially designed polymers, were attached to inorganic nanocrystals. All of these hybrid materials show fascinating properties, and are helpful in the research of new materials for optoelectronic applications.

Oberflächenstrukturierte amphiphile Polyphenylendendrimere zur Imitation natürlicher Transportproteine

In dieser Arbeit werden formstabile, amphiphile, oberflächenstrukturierte Polyphenylendendrimere (PPDs) mit verschiedenen Oberflächenpolaritäten beschrieben. Die physikalisch-chemischen Eigenschaften dieser Makromoleküle wurden studiert, welche ein gutes Verständnis der Nanoumgebung amphiphiler PPDs lieferten. Auch lichtinduzierte Polaritätsänderung wurde untersucht. Mit dem Konzept einer gleichmäßigen Verteilung polarer Bereiche auf der Peripherie hydrophober PPPs gelang es, Transportsysteme für Fettsäuren und Zytostatika zu erzeugen, welche charakteristische Merkmale natürlicher Transportproteine wie Albumin in sich vereinen. Hierzu zählen eine stabile dreidimensionale Form, die Ausbildung von Bindungstaschen sowie eine definierte strukturierte Oberfläche aus hydrophilen und hydrophoben Bereichen. Die Verfügbarkeit von lipophilen Bindungstaschen übertrifft sogar die des Albumins. Im Gegensatz zu Polymeren kann die Wirkstoffaufnahme bei PPDs exakt bestimmt werden. Die Anpassung der peripheren Gruppen beeinflusst den zellulären Aufnahmemechanismus. Es konnten effiziente Zellaufnahmen in A549-Zellen sowie der Transport und die intrazelluläre Freisetzung von Doxorubicin erreicht werden. Manche PPDs bieten eine Größe und Architektur, die es ermöglicht, Endothelzellen des Gehirns zu durchdringen. Es wurde auch der andere Extremfall untersucht, indem alle polaren Gruppen auf einer Hemisphäre akkumuliert wurden. Zur Darstellung solcher Janus-Dendrimere wurde ein neues Synthesekonzept herausgearbeitet und die erhaltenen Janus-Dendrimere mittels Lichtstreuung untersucht, wobei definierte perlenschnurartige Aggregate gefunden wurden. Weiterhin wurden semifluorierte Amphiphile vorgestellt, welche die Möglichkeit zur Selbstorganisation durch Nanophasenseparation bieten.