Commercial production of fish meal from fish waste

The importance of fish meal production as a means of reducing fish waste currently being experienced in the fisheries subsector is discussed. Cost estimate for Nigeria establishing a fish meal manufacturing plant and suggestions on rational execution of the project are presented. If properly located and well managed, the project will serve to convert fish waste to cash in the industrial fishery

Plant nutrients and major ions in the Little Sea, Studland, Dorset

This short paper records some measurements made on the Little Sea, a shallow, coastal, acidic lake on Studland Heath, Dorset. The lake, formed about 100 years ago by dunes cutting off a sea inlet, has not received any input of agricultural fertilizers or other waste products for at least the last 30 years. It is a Site of Special Scientific Interest (SSSI). Samples of surface water were taken from the northern and southern ends of the lake at 3-monthly intervals, from July 1995 to April 1996. The first samples in July 1995 were taken during a period of drought; rain, sometimes very heavy, came in late September. With the exception of silicate, potassium and phosphate, there were no large changes in plant nutrient concentrations during the year. The concentration of nitrate-nitrogen was very low (close to the limits of analytical detection), but total phosphorus at ca. 30 mu g per litre was similar to concentrations found in some of the Cumbrian eutrophic lakes. The large number of algal species at low cell/colony concentrations suggested that the lake is mesotrophic. Sodium, chloride and magnesium in the lake water were close to the same proportions as those found in sea water. Dry and wet deposition of sea-salts on the lake surface and its catchment area probably is the major source of sodium, magnesium and chloride ions in the lake, and also accounts for about half of the mean potassium and sulphate concentrations.

Application of algal bioassays in the determination of eutrophic power of waste water (”Conclusions” only) [Translation from: 1g.Sanita pubbl. 31 257-267, 1975]

The best evidence for establishing the level of eutrophy of a water-body is its algal production which makes it possible to identify the type and the intensity of the eutrophication according to the kind and number of algal species present: when the number of algae exceeds half a million per litre then one speaks o an ”algal bloom”. The scope of the present research aims to verify if the alga Selenastrum capricornutum can be used as a test alga under our culture conditions and to determine the eutrophic level of the secondary effluent of a modern plant for the treatment of domestic discharge and to investigate the eventual ”limiting factors”. Finally this paper aims to study the effect on the secondary effluent of tertiary treatment carried out artificially in the laboratory.

Estudo de viabilidade técnica, econômica e ambiental preliminar da aplicação da tecnologia de Tratamento Térmico de Resíduos e Materiais Multifásicos-TTRM a resíduos de terra diatomácea de usina genérica de produção de biodiesel.

O cenário mundial de matriz energética apresenta dados crescentes de contribuição das energias renováveis. No Brasil, o governo tem realizado esforços para aumento da parcela de combustíveis renováveis, e com isso isso também para o aumento da produção de biodiesel. O principal processo de fabricação de biodiesel com seu polimento em via seca gera quantidades significativas de resíduos, dentre eles, o resíduo de terra diatomácea, com potenciais características de inflamabilidade. Em contrapartida existe a Política Nacional de Resíduos Sólidos com objetivos de não geração, redução, reutilização, reciclagem e redução de periculosidade dos resíduos, e envio para aterro somente de resíduos sem qualquer possibilidade viável de tratamento. O presente trabalho objetiva realizar um estudo de viabilidade técnica, econômica e ambiental preliminar da aplicação da tecnologia de Tratamento Térmico de Resíduos e Materiais Multifásicos - TTRM a resíduo de terra diatomácea - RTD de usina genérica de biodiesel. Foram utilizados como base para o estudo: os resultados dos testes da PETROBRAS e da ALBRECHT realizados em escala de bancada de laboratório e em planta piloto que simularam a aplicação do TTRM ao RTD; premissas técnicas; premissas operacionais; e dados econômicos de referência. Foram estabelecidos cenários específicos para o estudo da aplicabilidade e realizada análise de sensibilidade para os principais fatores da composição dos custos. Observou-se para este estudo preliminar que: na dimensão técnica o TTRM demonstrou ser aplicável; na dimensão econômica, os indicadores são positivos em sua totalidade no cenário esperado, mesmo após análise de sensibilidade com variações de 25% dos principais parâmetros de entrada do estudo de viabilidade; na dimensão ambiental o TTRM demonstrou ser uma alternativa que incorpora os conceitos para uma gestão alinhada com a Política Nacional de Resíduos Sólidos, seja na redução da periculosidade do resíduo, na potencial minimização da geração dos resíduos ou no reuso e reaproveitamento resíduos.

Cholesterol from prawn-head waste

A process is described for the isolation of Cholesterol from the fat obtained from prawn head-waste. Cholesterol of about 94% percent purity is obtained. The final yield on the basis of fat is about 2%.

Design of refrigerated sea water plant for preservation of fish

To study the feasibility of employing refrigerated sea water on board fishing vessels for the preservation of fish, a pilot model has been designed, the details of which are presented in this paper.

Optimisation of fuel usage and steam availability in the power and steam plant of a paper mill

This paper presents the results of a project aimed at minimising fuel usage while maximising steam availability in the power and steam plant of a large newsprint mill. The approach taken was to utilise the better regulation and plant wide optimisation capabilities of Advanced Process Control, especially Model Predictive Control (MPC) techniques. These have recently made their appearance in the pulp and paper industry but are better known in the oil and petrochemical industry where they have been used for nearly 30 years. The issue in the power and steam plant is to ensure that sufficient steam is available when the paper machines require it and yet not to have to waste too much steam when one or more of the machines suffers an outage. This is a problem for which MPC is well suited. It allows variables to be kept within declared constraint ranges, a feature which has been used, effectively, to increase the steam storage capacity of the existing plant. This has resulted in less steam being condensed when it is not required and in significant reductions in the need for supplementary firing. The incidence of steam being dump-condensed while also supplementary firing the Combined Heat & Power (CHP) plant has been reduced by 95% and the overall use of supplementary firing is less than 30% of what it was. In addition the plant runs more smoothly and requires less operator time. The yearly benefit provided by the control system is greater than £200,000, measured in terms of 2005 gas prices.

STUDIES ON THE PURIFICATION AND RECLAMATION OF WASTE-WATER FROM A MEDIUM-SIZED CITY BY AN INTEGRATED BIOLOGICAL POND SYSTEM

The feasibility of an inexpensive wastewater treatment system is evaluated in this study. An integrated biological pond system was operated for more than 3 years to purify the wastewater from a medium-sized city, Central China. The experiment was conducted in 3 phases with different treatment combinations for testing their purification efficiencies. The pond system was divided into 3 functional regions: influent purification, effluent upgrading and multi-utilization. These regions were further divided into several zones and subzones. Various kinds of aquatic organisms, including macrophytes, algae, microorganisms and zooplankton, were effectively cooperating in the wastewater treatment in this system. The system attained high reductions of BOD5, COD, TSS, TN, TP and other pollutants. The purification efficiencies of this system were higher than those of most traditional oxidation ponds or ordinary macrophyte ponds. The mutagenic effect and numbers of bacteria and viruses declined significantly during the process of purification. After the wastewater flowed through the upgrading zone, the concentrations of pollutants and algae evidently decreased. Plant harvesting did not yield dramatic effects on reductions of the main pollutants, though it did significantly affect the biomass productivity of the macrophytes. The effluent from this system could be utilized in irrigation and aquaculture. Some aquatic products were harvested from this system and some biomass was utilized for food, fertilizer, fodder and some other uses. The wastewater was reclaimed for various purposes.

Design and Operation of A 5.5 MWe Biomass Integrated Gasification Combined Cycle Demonstration Plant

The design and operation of a 5.5 MWe biomass integrated gasification combined cycle (IGCC) demonstration plant, which is located in Xinghua, Jiangsu Province of China, are introduced. It is the largest complete biomass gasification power plant that uses rice husk and other agricultural wastes as fuel in Asia. It mainly consists of a 20 MWt atmospheric circulating fluidized-bed gasifier, a gas-purifying system, 10 sets of 450 kW(e) gas engines, a waste heat boiler, a 1.5 MWe steam turbine, a wastewater treatment system, etc. The demonstration plant has been operating since the end of 2005, and its overall efficiency reaches 26-28%. Its capital cost is less than 1200 USD/kW, and its running cost is about 0.079 USD/kWh based on the biomass price of 35.7 USD/ton. There is a 20% increment on capital cost and 35% decrease on the fuel consumption compared to that of a 1 MW system without a combined cycle. Because only part of the project has been performed, many of the tests still remain and, accordingly, must be reported at a later opportunity.

Towards manipulation of post-biosynthetic events in secondary metabolism of plant cell cultures

Plant cell cultures have been suggested as a feasible technology for the production of a myriad of plant-derived metabolites. However, commercial application of plant cell culture has met limited success with only a handful of metabolites produced at the pilot- and commercial-scales. To improve the production of secondary metabolites in plant cell cultures, efforts have been devoted predominantly to the optimization of biosynthetic pathways by both process and genetic engineering approaches. Given that secondary metabolism includes-the synthesis. metabolism and catabolism of endogenous compounds by the specialized proteins, this review intends to draw attention to the manipulation and optimization of post-biosynthetic events that follow the formation of core metabolite structures in biosynthetic pathways. These post-biosynthetic events-the chemical and enzymatic modifications, transport, storage/secretion and catabolism/degradation have been largely unexplored in the past. Potential areas are identified where further research is needed to answer fundamental questions that have implications for advanced bioprocess design. Anthocyanin production by plant cell cultures is used as a case study for this discussion, as it presents a good example of compounds for which there are extensive research publications but still no commercial bioprocess. It is perceived that research on post-biosynthetic processes may lead to future opportunities for significant advances in commercial plant cell cultures. (C) 2002 Elsevier Science Inc. All rights reserved.