Exact dynamics of single-qubit-gate fidelities under the measurement-based quantum computation scheme

Measurement-based quantum computation is an efficient model to perform universal computation. Nevertheless, theoretical questions have been raised, mainly with respect to realistic noise conditions. In order to shed some light on this issue, we evaluate the exact dynamics of some single-qubit-gate fidelities using the measurement-based quantum computation scheme when the qubits which are used as a resource interact with a common dephasing environment. We report a necessary condition for the fidelity dynamics of a general pure N-qubit state, interacting with this type of error channel, to present an oscillatory behavior, and we show that for the initial canonical cluster state, the fidelity oscillates as a function of time. This state fidelity oscillatory behavior brings significant variations to the values of the computational results of a generic gate acting on that state depending on the instants we choose to apply our set of projective measurements. As we shall see, considering some specific gates that are frequently found in the literature, the fast application of the set of projective measurements does not necessarily imply high gate fidelity, and likewise the slow application thereof does not necessarily imply low gate fidelity. Our condition for the occurrence of the fidelity oscillatory behavior shows that the oscillation presented by the cluster state is due exclusively to its initial geometry. Other states that can be used as resources for measurement-based quantum computation can present the same initial geometrical condition. Therefore, it is very important for the present scheme to know when the fidelity of a particular resource state will oscillate in time and, if this is the case, what are the best times to perform the measurements.

Comparison of Two Staining Methods for Pollen Viability Studies in Sugarcane

The present work aimed to compare two staining methods for pollen viability evaluation in sugarcane. Pollen from four sugarcane genotypes were collected at three different times (6.00, 8.00 and 9.00 a.m.) and tested for viability using two staining methods (iodine and lactophenol blue). Three anthers, of each genotype were crushed in a glass slide with a drop of the respective stain (iodine 0.1 N and lactophenol blue). The percentage of pollen viability was obtained with an optic microscope (250×) and compared with the pollen germination at culture media where one raquis of each genotype was gentle shaken in a petridish. Three replicates (petri dishes) was performed for each genotype which were maintained at the temperature of 25 °C and air humidity around 95 % for 30 min. The factors (staining methods, genotypes and times) and their interactions were evaluated by the analysis of variance, F test (P < 0.01) and the means compared by the t test (P < 0.05). The lactophenol blue staining was more sensible than the iodine staining method to detect the decrease of pollen viability which occurs naturally in sugarcane. The iodine staining method was more stable and easier than lactophenol to perform the inflorescence classification at any evaluated time (6.00, 8.00 and 9.00 a. m.). Both staining methods overestimated the viability obtained by the germination at culture media when performed at 6.00 a.m. © 2012 Society for Sugar Research & Promotion.

Luminescence Enhancement of Carboxyl-Coated CdTe Quantum Dots by Silver Nanoparticles

Metallic nanoparticles (NPs) have been used to improve the sensibility of biosensors and bioassays either by enhancing radiative emission or inducing quenching process on fluorescent probes. The aim of this research was to study the interaction of silver and silver-pectin NPs with water-dispersed carboxyl-coated cadmium telluride (CdTe) quantum dots (QDs). Metallic NPs were observed to change the emission of these fluorophores through local field effects. In a solution-base platform, an increase of 82 % was observed for the CdTe emission due to the interaction of QDs and silver-pectin NPs. QDs interaction with silver NPs without pectin was also investigated and a smaller emission enhancement of 20 % was detected. We observed that the NPs' nature and QDs' surface charge and concentration are important parameters for NPs-QDs interaction. Moreover, the presence of the pectin polymer shows to be a key component to the observed fluorescence enhancement. © 2013 Springer Science+Business Media New York.

Evaluation of two genera of benthic foraminifera for down-core paleotemperature studies in the western south atlantic

Neste estudo, compara-se a composição de isótopos de oxigênio de dois gêneros de foraminíferos bentônicos (Uvigerina e Cibicidoides) de amostras de topo de testemunho com a composição isotópica moderna da água do mar (d¹⁸O). Baseados em uma nova relação entre d¹⁸O e salinidade para a latitude média do Atlântico Sul ocidental, estimou-se a composição isotópica da calcita em equilíbrio (d¹⁸O_eq) a partir de duas equações diferentes: (1) O'Neil et al. (1969), modificada por McCorkle et al. (1997) e (2) Kim & O'Neil (1997). Utilizando (1), a pequena diferença entre d¹⁸O_eq e d¹⁸O de Uvigerina sugere que este gênero precipita as suas testas próximo ao equilíbrio com a água. Já os dados de d¹⁸O de Cibicidoides são 0,82 ‰ menores que a composição isotópica prevista. Ao contrário, utilizando (2) os dados de d¹⁸O de Cibicidoides mostram uma concordância excelente com a composição isotópica esperada, enquanto que os dados de d¹⁸O de Uvigerina são 0,69 ‰ maiores que os valores de equilíbrio previstos. A partir das evidências apresentadas neste trabalho e em estudos prévios sugerimos a utilização do gênero Cibicidoides e a aplicação da equação de Kim & O'Neil (1997) para pesquisas de paleotemperatura. Na ausência de suficientes espécimens de Cibicidoides sugerimos a utilização de d¹⁸O deUvigerina aplicando um fator de correção de -0,69 ‰.

Genetic Variability and Geographical Diversity of the Main Chagas' Disease Vector Panstrongylus megistus (Hemiptera: Triatominae) in Brazil Based on Ribosomal DNA Intergenic Sequences

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Técnica do Grupo de Renormalização Numérico (GRN) aplicada em quantum dots

Pós-graduação em Física - IGCE

Susceptibility of Rhipicephalus (Boophilus) microplus to ivermectin (200, 500 and 630 mu g/kg) in field studies in Brazil

The present study aimed to determine the susceptibility of 17 Rhipicephalus (Boophilus) microplus populations, originating in the Southeast and Southern regions of Brazil, to different ivermectin concentrations (200, 500 and 630 mu g/kg), administered through subcutaneous or topical (pour-on) routes. R. (B.) microplus populations from the states of Minas Gerais (seven populations), Sao Paulo (seven populations) and Parana (three populations) were chosen for the tests. The selected cattle were allocated to treatment groups on day 0, and block formation was based on the arithmetic mean of female ticks (4.5-8.0 mm long) counted on three consecutive days (-3, -2 and -1). To evaluate the therapeutic and residual efficacies of these formulations, tick counts (females ranging from 4.5 to 8.0 mm long) were performed on days 3,7 and 14 post-treatment, and continued on a weekly basis thereafter until the end of each experiment. The results obtained throughout this study, utilizing field efficacy studies, allowed us to conclude that the resistance of R. (B.) microplus against 200 and 500 mu g/kg ivermectin is widely disseminated because all tick populations that had contact with these specific concentrations were diagnosed as resistant. However, it is possible to infer that R. (B.) microplus resistance against 630 mu g/kg ivermectin was also widespread, diagnosed at six of ten analyzed properties. Resistance of these ectoparasites to 630 mu g/kg ivermectin is most likely emerging in three other populations of R. (B.) microplus. Strategies of resistance management need to be quickly determined to keep the selection pressure at a minimum level in Brazil. (C) 2014 Elsevier B.V. All rights reserved.

Dendrimers as potential platform in nanotechnology-based drug delivery systems

The dendrimers of poly (amidoamine) (PAMAM) are nanoparticles which have proven succeed in transporting drugs due to high solubility, low toxicity and ability to control drugs release. Studies have explored the biological potential of dendrimers such as to transport genes, development of vaccines, antiviral, antibacterial and anticancer therapies. This review of literature on the PAMAM dendrimers discusses the architecture and general construction of dendrimers and intrinsic properties of the PAMAM. This study also describes how the PAMAM interact with many drugs and the potential of these macromolecules as well as drug nanocarriers in transdermal routes of administration, ocular, respiratory, oral and intravenous administration. Dendrimers promises good future prospects for the biomedicine.

Evaluation of maturity levels in the management of product development: case studies in the capital goods industry

In recent approaches to the management of product development process (PDP), maturity levels have attracted the attention of practitioners and researchers. The CMMI model contributes to evaluate the maturity levels and improvement of the product development process management. This paper, based on CMMI model, analyzes the practices adopted in two companies of the capital goods industry, which develop and manufacture equipment upon request. It was observed that on account of market conditioning factors and different practices adapted to PDP management, these companies are at different maturity levels. One company is at the initial level of maturity while the other at the most advanced one. It was also noted that the application of CMMI model can provide improvement to PDP management, as well as present guidelines to achieve higher maturity levels, adequate to companies' needs.

Optimization of Amplifier Placements in Switch-Based Optical Networks

Wavelength division multiplexing (WDM) offers a solution to the problem of exploiting the large bandwidth on optical links; it is the current favorite multiplexing technology for optical communication networks. Due to the high cost of an optical amplifier, it is desirable to strategically place the amplifiers throughout the network in a way that guarantees that all the signals are adequately amplified while minimizing the total number amplifiers being used. Previous studies all consider a star-based network. This paper demonstrates an original approach for solving the problem in switch-based WDM optical network assuming the traffic matrix is always the permutation of the nodes. First we formulate the problem by choosing typical permutations which can maximize traffic load on individual links; then a GA (Genetic Algorithm) is used to search for feasible amplifier placements. Finally, by setting up all the lightpaths without violating the power constaints we confirm the feasibility of the solution.

Structural, morphological, and magnetic characterization of In1-xMnxAs quantum dots grown by molecular beam epitaxy

In this paper, we present a method to order low temperature (LT) self-assembled ferromagnetic In1-xMnxAs quantum dots (QDs) grown by molecular beam epitaxy (MBE). The ordered In1-xMnxAs QDs were grown on top of a non-magnetic In0.4Ga0.6As/GaAs(100) QDs multi-layered structure. The modulation of the chemical potential, due to the stacking, provides a nucleation center for the LT In1-xMnxAs QDs. For particular conditions, such as surface morphology and growth conditions, the In1-xMnxAs QDs align along lines like chains. This work also reports the characterization of QDs grown on plain GaAs(100) substrates, as well as of the ordered structures, as function of Mn content and growth temperature. The substitutional Mn incorporation in the InAs lattice and the conditions for obtaining coherent and incoherent structures are discussed from comparison between Raman spectroscopy and x-ray analysis. Ferromagnetic behavior was observed for all structures at 2K. We found that the magnetic moment axis changes from [110] in In1-xMnxAs over GaAs to [1-10] for the ordered In1-xMnxAs grown over GaAs template. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4745904]

The influence of different indium-composition profiles on the electronic structure of lens-shaped InxGa1-xAs quantum dots

We present effective-mass calculations of the bound-state energy levels of electrons confined inside lens-shaped InxGa1-xAs quantum dots (QDs) embedded in a GaAs matrix, taking into account the strain as well as the In gradient inside the QDs due to the strong In segregation and In-Ga intermixing present in the InxGa1-xAs/GaAs system. In order to perform the calculations, we used a continuum model for the strain, and the QDs and wetting layer were divided into their constituting monolayers, each one with a different In concentration, to be able to produce a specific composition profile. Our results clearly show that the introduction of such effects is very important if one desires to correctly reproduce or predict the optoelectronic properties of these nanostructures.

Exact dynamics of single-qubit-gate fidelities under the measurement-based quantum computation scheme

Measurement-based quantum computation is an efficient model to perform universal computation. Nevertheless, theoretical questions have been raised, mainly with respect to realistic noise conditions. In order to shed some light on this issue, we evaluate the exact dynamics of some single-qubit-gate fidelities using the measurement-based quantum computation scheme when the qubits which are used as a resource interact with a common dephasing environment. We report a necessary condition for the fidelity dynamics of a general pure N-qubit state, interacting with this type of error channel, to present an oscillatory behavior, and we show that for the initial canonical cluster state, the fidelity oscillates as a function of time. This state fidelity oscillatory behavior brings significant variations to the values of the computational results of a generic gate acting on that state depending on the instants we choose to apply our set of projective measurements. As we shall see, considering some specific gates that are frequently found in the literature, the fast application of the set of projective measurements does not necessarily imply high gate fidelity, and likewise the slow application thereof does not necessarily imply low gate fidelity. Our condition for the occurrence of the fidelity oscillatory behavior shows that the oscillation presented by the cluster state is due exclusively to its initial geometry. Other states that can be used as resources for measurement-based quantum computation can present the same initial geometrical condition. Therefore, it is very important for the present scheme to know when the fidelity of a particular resource state will oscillate in time and, if this is the case, what are the best times to perform the measurements.

Inverse problems in classical and quantum physics

The subject of this thesis is in the area of Applied Mathematics known as Inverse Problems. Inverse problems are those where a set of measured data is analysed in order to get as much information as possible on a model which is assumed to represent a system in the real world. We study two inverse problems in the fields of classical and quantum physics: QCD condensates from tau-decay data and the inverse conductivity problem. Despite a concentrated effort by physicists extending over many years, an understanding of QCD from first principles continues to be elusive. Fortunately, data continues to appear which provide a rather direct probe of the inner workings of the strong interactions. We use a functional method which allows us to extract within rather general assumptions phenomenological parameters of QCD (the condensates) from a comparison of the time-like experimental data with asymptotic space-like results from theory. The price to be paid for the generality of assumptions is relatively large errors in the values of the extracted parameters. Although we do not claim that our method is superior to other approaches, we hope that our results lend additional confidence to the numerical results obtained with the help of methods based on QCD sum rules. EIT is a technology developed to image the electrical conductivity distribution of a conductive medium. The technique works by performing simultaneous measurements of direct or alternating electric currents and voltages on the boundary of an object. These are the data used by an image reconstruction algorithm to determine the electrical conductivity distribution within the object. In this thesis, two approaches of EIT image reconstruction are proposed. The first is based on reformulating the inverse problem in terms of integral equations. This method uses only a single set of measurements for the reconstruction. The second approach is an algorithm based on linearisation which uses more then one set of measurements. A promising result is that one can qualitatively reconstruct the conductivity inside the cross-section of a human chest. Even though the human volunteer is neither two-dimensional nor circular, such reconstructions can be useful in medical applications: monitoring for lung problems such as accumulating fluid or a collapsed lung and noninvasive monitoring of heart function and blood flow.

Nuclear structure studies in the xenon and radon region and the discovery of a new radon isotope by Penning trap mass spectrometry

Heutzutage gewähren hochpräzise Massenmessungen mit Penning-Fallen tiefe Einblicke in die fundamentalen Eigenschaften der Kernmaterie. Zu diesem Zweck wird die freie Zyklotronfrequenz eines Ions bestimmt, das in einem starken, homogenen Magnetfeld gespeichert ist. Am ISOLTRAP-Massenspektrometer an ISOLDE / CERN können die Massen von kurzlebigen, radioaktiven Nukliden mit Halbwertszeiten bis zu einigen zehn ms mit einer Unsicherheit in der Größenordnung von 10^-8 bestimmt werden. ISOLTRAP besteht aus einem Radiofrequenz-Quadrupol zum akkumulieren der von ISOLDE gelieferten Ionen, sowie zwei Penning-Fallen zum säubern und zur Massenbestimmung der Ionen. Innerhalb dieser Arbeit wurden die Massen von neutronenreichen Xenon- und Radonisotopen (138-146Xe und 223-229Rn) gemessen. Für elf davon wurde zum ersten Mal die Masse direkt bestimmt; 229Rn wurde im Zuge dieses Experimentes sogar erstmalig beobachtet und seine Halbwertszeit konnte zu ungefähr 12 s bestimmt werden. Da die Masse eines Nuklids alle Wechselwirkungen innerhalb des Kerns widerspiegelt, ist sie einzigartig für jedes Nuklid. Eine dieser Wechselwirkungen, die Wechselwirkung zwischen Protonen und Neutronen, führt zum Beispiel zu Deformationen. Das Ziel dieser Arbeit ist eine Verbindung zwischen kollektiven Effekten, wie Deformationen und Doppeldifferenzen von Bindungsenergien, sogenannten deltaVpn-Werten zu finden. Insbesondere in den hier untersuchten Regionen zeigen deltaVpn-Werte ein sehr ungewöhnliches Verhalten, das sich nicht mit einfachen Argumenten deuten lässt. Eine Erklärung könnte das Auftreten von Oktupoldeformationen in diesen Gebieten sein. Nichtsdestotrotz ist eine quantitative Beschreibung von deltaVpn-Werten, die den Effekt von solchen Deformationen berücksichtigt mit modernen Theorien noch nicht möglich.