The use of enzymes in organic solvents in polytransesterification reactions

The aim of this research project was to identify the factors affecting the porcine pancreatic lipase (PPL.)-catalysed polytransesterification of a diester and a diol in organic solvents. It was hoped that by modifying reaction conditions a commercially acceptable polymer molecular weight (Mn) of 20,000 daltons might be attained. Exploratory investigations were carried out using 1,4-butanediolibis(2,2,2- trichloroethyl) adipate and glutarate systems in diethyl ether, with and without molecular sieves. It was found that molecular sieves promoted the reaction by reducing hydrolysis of the ester end-groups, resulting in polymer molecular weights between 1.2 and 2.2 times greater than those obtainable without molecular sieves. Investigations were then concentrated on the PPL-catalysed polytransesterification of 1,4-butanediol with divinyl adipate. The particular advantage of this system is that the reaction is irreversible. The effects of varying substrate concentration, mass of drying agent, reaction solvent, reaction temperature, mass of enzyme and also enzyme immobilisation on the 1,4-butanediolidivinyl adipate system were investigated. The highest molecular weight polymer obtained for the PPL-catalysed polytransesterification of 1,4-butanedial with divinyl adipate in diethyl ether was Mn -8,000. In higher boiling ether solvents molecular weights as high as Mn -9,200 were obtained for this system at elevated temperatures. It was found that the major factor limiting polymerisation was the low solubility of the polymer in the solvent which resulted in precipitation of the polymer onto the surface of the enzyme.

The use of context in the classification of urban aerial imagery

Urban regions present some of the most challenging areas for the remote sensing community. Many different types of land cover have similar spectral responses, making them difficult to distinguish from one another. Traditional per-pixel classification techniques suffer particularly badly because they only use these spectral properties to determine a class, and no other properties of the image, such as context. This project presents the results of the classification of a deeply urban area of Dudley, West Midlands, using 4 methods: Supervised Maximum Likelihood, SMAP, ECHO and Unsupervised Maximum Likelihood. An accuracy assessment method is then developed to allow a fair representation of each procedure and a direct comparison between them. Subsequently, a classification procedure is developed that makes use of the context in the image, though a per-polygon classification. The imagery is broken up into a series of polygons extracted from the Marr-Hildreth zero-crossing edge detector. These polygons are then refined using a region-growing algorithm, and then classified according to the mean class of the fine polygons. The imagery produced by this technique is shown to be of better quality and of a higher accuracy than that of other conventional methods. Further refinements are suggested and examined to improve the aesthetic appearance of the imagery. Finally a comparison with the results produced from a previous study of the James Bridge catchment, in Darleston, West Midlands, is made, showing that the Polygon classified ATM imagery performs significantly better than the Maximum Likelihood classified videography used in the initial study, despite the presence of geometric correction errors.

The use of lubricants in iron powder metallurgy

This investigation has been concerned with the behaviour of solid internal lubricant during mixing, compaction, ejection, dewaxing and sintering of iron powder compacts. Zinc stearate (0.01%-4.0%) was added to irregular iron powder by admixing or precipitation from solution. Pressure/density relationships, determined by continuous compaction, and loose packed densities were used to show that small additions of zinc stearate reduced interparticle friction during loose packing and at low compaction pressures. Large additions decreased particle/die-wall friction during compaction and ejection but also caused compaction inhibition. Transverse rupture strengths were determined on compacts containing various stearate based lubricants and it was found that green strength was reduced by the interposition of a thin lubricant layer within inter~particle contacts. Only materials much finer than the iron powder respectively) were able to form such layers. Investigations were undertaken to determine the effect of the decomposition of these lubricants on the development of mechanical properties in dewaxed or sintered compacts. Physical and chemical influences on tensile strength were observed. Decomposition of lubricants was associated with reductions of strength caused by the physical effects of pressure increases and removal of lubricant from interparticle contacts. There were also chemical effects associated with the influence of gaseous decomposition products and solid residues on sintering mechanisms. Thermogravimetry was used to study the decomposition behaviour of various lubricants as free compounds and within compacts. The influence of process variables such as atmosphere type, flow-rate and compact density were investigated. In a reducing atmosphere the decomposition of these lubricants was characterised by two stages. The first involved the rapid decomposition of the hydrocarbon radical. The second, higher temperature, reactions depended on lubricant type and involved solid residues. The removal of lubricant could also markedly affect dimensional change.

The use of topiramate in mood stabilization

OBJECTIVE: To review data on the effectiveness of topiramate as a mood stabilizer. DATA SOURCES: Clinical literature accessed through MEDLINE (1985-September 2001) and the manufacturer. Key search terms included topiramate, mania, mood stabilizer, and bipolar disorder. DATA SYNTHESIS: The traditional standard therapy for bipolar disorder has been lithium. Other mood stabilizers are increasingly being used to manage this complex disorder. Studies that used topiramate in bipolar disorders were evaluated. CONCLUSIONS: The present data from open trials suggest that topiramate may possibly possess antimanic properties. Controlled, double-blind studies are required to confirm this efficacy

Agency Costs, Bankruptcy Costs and the Use of Debt in Multinational Restaurant Firms

The purpose of this paper is to understand whether multinational restaurant firms (MNRF’s) have higher agency and expected bankruptcy costs. Given this expectation, this may have an impact on the amount of debt incurred by MNRF’s. Overall, the findings are consistent with the existing literatue in terms of the positive relationship between MNRF’s and agency and bankruptcy cost. However, it was found that MNRF’s also have more total debt. This is surprising given the higher agency and bankruptcy costs. The importance of this research is that there may be considerations other than agency and bacnkruptcy costs affecting the capital structure decisions of MNRF’s.

The use of modelling in purchasing/supply management research

The purpose of this research to explore the use of modelling in the field of Purchasing and Supply Management (P/SM). We are particularly interested in identifying the specific areas of P/SM where there are opportunities for the use of modelling based methods. The paper starts with an overview of main types of modelling and also provides a categorisation of the main P/SM research themes. Our research shows that there are many opportunities for using descriptive, predictive and prescriptive modelling approaches in all areas of P/SM research from the ones with a focus on the actual function from a purely operational and execution perspective (e.g. purchasing processes and behaviour) to the ones with a focus on the organisational level from a more strategic perspective (e.g. strategy and policy). We conclude that future P/SM research needs to explore the value of modelling not just at the functional or operational level, but also at the organisation and strategic level respectively. We also acknowledge that while using empirical results to inform and improve models has advantages, there are also drawbacks, which relate to the value, the practical relevance and the generalisability of the modelling based approaches.

The Use of Nudges in Exergames to Moderate Player Exertion

Exergames are digital games with a physical exertion component. Exergames can help motivate fitness in people not inclined toward exercise. However, players of exergames sometimes over-exert, risking adverse health effects. These players must be told to slow down, but doing so may distract them from gameplay and diminish their desire to keep exercising. In this thesis we apply the concept of nudges—indirect suggestions that gently push people toward a desired behaviour—to keeping exergame players from over-exerting. We describe the effective use of nudges through a set of four design principles: natural integration, comprehension, progression, and multiple channels. We describe two exergames modified to use nudges to persuade players to slow down, and describe the studies evaluating the use of nudges in these games. PlaneGame shows that nudges can be as effective as an explicit textual display to control player over-exertion. Gekku Race demonstrates that nudges are not necessarily effective when players have a strong incentive to over-exert. However, Gekku Race also shows that, even in high-energy games, the power of nudges can be maintained by adding negative consequences to the nudges. We use the term "shove" to describe a nudge using negative consequences to increase its pressure. We were concerned that making players slow down would damage their immersion—the feeling of being engaged with a game. However, testing showed no loss of immersion through the use of nudges to reduce exertion. Players reported that the nudges and shoves motivated them to slow down when they were over-exerting, and fit naturally into the games.

The Role of ‘Edutainment’ in Education for Sustainable Development

The Sustainable Strategies Game (SSG) is being developed as ‘edutainment’ in response to the need to understand sustainable futures and advocate sustainability within workplaces in Higher Education. SSG seeks to both deliver experiential teaching and learning for business sustainability and enhance students’ learning experiences within Worcester Business School. This paper presents findings from action research undertaken to formally investigate two aspects of SSG within edutainment for ESD: firstly, it explores the value students obtain from game playing as an approach to sustainability learning. Secondly, it establishes students’ suggestions for evolutions to SSG, e.g. game design and additional features such as social media interventions or legal challenges, to increase its value as a tool for teaching and learning. Informal feedback following sessions playing SSG suggests games generally generate positive effects on students’ learning. Students highlighted SSG offered an enjoyable alternative approach to learning and could drive changes to sustainability thinking. Introducing such gameplay offers the potential to engage participants in collaborative behaviours and encourage consideration of profitability through strategies which carry less impact on the environment; vital to create a sustainable future. This paper presents qualitative evidence from game players that can enhance SSG as a tool to further improve students’ learning experience and its value as edutainment rather than entertainment within ESD.

Experience with the use of Acrobat in the CAJUN publishing project

Adobe's Acrobat software, released in June 1993, is based around a new Portable Document Format (PDF) which offers the possibility of being able to view and exchange electronic documents, independent of the originating software, across a wide variety of supported hardware platforms (PC, Macintosh, Sun UNIX etc.). The fact that Acrobat's imageable objects are rendered with full use of Level 2 PostScript means that the most demanding requirements can be met in terms of high-quality typography and device-independent colour. These qualities will be very desirable components in future multimedia and hypermedia systems. The current capabilities of Acrobat and PDF are described; in particular the presence of hypertext links, bookmarks, and yellow sticker annotations (in release 1.0) together with article threads and multi-media plugins in version 2.0, This article also describes the CAJUN project (CD-ROM Acrobat Journals Using Networks) which has been investigating the automated placement of PDF hypertextual features from various front-end text processing systems. CAJUN has also been experimenting with the dissemination of PDF over e-mail, via World Wide Web and on CDROM.

Rosarum monographia; or, A botanical history of roses to which is added, an appendix, for the use of cultivators, in which the most remarkable garden varieties are systematically arranged ...

Mode of access: Internet.

Re-imagining the theology of human sexuality in the Methodist Church: the use of narrative in theological methodology

This thesis proposes the development of a narrative methodology in the British Methodist Church. Such a methodology embraces and communicates both felt experience and critical theological thinking, thus producing and presenting a theology that might have a constructive transformative impact on wider society. In chapter one I explore the ways in which the Church speaks in public, identify some of the challenges it faces, and consider four models of engagement. If the Church is to engage in public discourses then I argue that its words need to be relevant and connect with people’s experiences. To ground the thinking I focus on the context of the British Methodist Church and explore how the Church engages in theological reflection through the lens of its thinking on issues of human sexuality. Chapter two reviews how theological reflection is undertaken in the British Methodist Church. I describe how the Methodist Quadrilateral of Scripture, tradition, reason and experience remains a foundational framework for theological reflection within the Methodist Church and consider the impact of institutional processes and the ways in which the Methodist people actually engage with theological thinking. The third and fourth chapters focus on how the British Methodist Church has produced its theology of human sexuality, giving particular attention to the use of personal and sexual stories in this process. I find that whilst there has been a desire to listen to the stories of the Methodist people, there has not been a corresponding interrogation or analysis of their stories so as to enable robust and constructive theological reflection on these experiences. Using resources from Foucauldian approaches to discourse analysis, I critique key statements and the processes involved in their production, offering an analysis of this body of theological thinking and indicating where possibilities for alternative ways of thinking and acting arise. The proposed methodology draws upon resources from social science methodologies, and in chapter five I look at the use of personal experience and relevant strategies of inquiry that prompt reflection on the hermeneutical process and employ narrative approaches in undertaking, analysing and presenting research. The exploration shows that qualitative research methodologies offer resources and methods of inquiry that could help the Church to engage with personal stories in its theological thinking in a robust, interrogative and imaginative way. In chapter six an examination of story and narrative is undertaken, to show how they have been understood as ways of knowing and how they relate to theological inquiry. Whilst acknowledging some of the limitations of narrative, I indicate how it offers constructive possibilities for theological reflection and could be a means for the British Methodist Church to engage in public discourse. This is explored further in chapter seven, which looks in more detail at how the British Methodist Church has used narrative in its theological thinking, and outlines areas requiring further attention in order for a narrative theological methodology to be developed, namely: attention to the question ‘whose experience?’; investigation of issues of power and the dynamics involved in the process of the production of theological thought; how personal stories and experiences are interrogated and how narrative is constructed; and how narrative might be employed within the Methodist Quadrilateral. The final chapter considers the advantages and limitations of such an approach, whether the development of such a method is possible in the Methodist Church today and its potential for helping the Church to engage in public discourse more effectively. I argue that this methodology can provoke new theological insights and enable new ways of being in the world

Some comments about the use of GHP in Alentejo (Portugal)

In this work we advocate the use of geothermal pumps to cool the isolated houses that can be observed in the plain of Alentejo. Passive cooling of the houses, made for centuries, becomes insufficient when it aims to promote tourism in the region. The climatic characteristics of the region and the relatively high values of the thermal conductivity of the ground favour this type of use. The available land around the houses provide places where you can drill or make trenches to put the pipes under the surface . Some values of pipe lengths were obtained using values appropriate for the region. The need to try to preserve the shape of the typical houses of the region discourages the use of solar panels placed on the roofs. The length and time of use of the equipment is another factor to take into account in the analysis of the costs.