Effect of the surface chemical groups of activated carbons on their surface adsorptivity to aromatic adsorbates based on π-π interactions

Three activated carbons with different surface chemical groups were used to analyse the influence of these groups on their adsorption capacities towards aromatic-type molecules whose adsorption is based on π-π interactions with surface arene centres. The three activated carbons studied were a low-functionalized carbon (Merck), an oxygen-rich carbon obtained by HNO3 oxidation of Merck, and a nitrogen-rich carbon also prepared from Merck by mild HNO3 oxidation followed by treatment with a dicyanodiamide/dimethyl formamide mixture at 300 °C. The nature of the surface chemical groups of the three activated carbons was investigated by both physical and chemical techniques (TPD, XPS, Boehm analysis and pH potentiometric titration). A systematic study of the adsorptions of a series of analogous aromatic adsorbates on the three activated carbons was carried out to study the adsorption mechanisms. In all cases the adsorption mechanism is based on π-π interactions between the aromatic moiety of the adsorbates and the arene centres of the graphite sheets. The differences in the normalized adsorption capacities of the adsorbents for a set of adsorbates indicate that the π-donor or π-withdrawing character of the functional groups have a clear influence on the basicity of the arene centres.

Novel biomass conversion routes:ammonia from biomass, and marine macroalgae for energy

This thesis presents a techno-economic investigation of the generation of electricity from marine macroalgae (seaweed) in the UK (Part 1), and the production of anhydrous ammonia from synthesis gas (syngas) generated from biomass gasification (Part 2). In Part 1, the study covers the costs from macroalgae production to the generation of electricity via a CHP system. Seven scenarios, which varied the scale and production technique, were investigated to determine the most suitable scale of operation for the UK. Anaerobic digestion was established as the most suitable technology for macroalgae conversion to CHP, based on a number of criteria. All performance and cost data have been taken from published literature. None of the scenarios assessed would be economically viable under present conditions, although the use of large-scale electricity generation has more potential than small-scale localised production. Part 2 covers the costs from the delivery of the wood chip feedstock to the production of ammonia. Four cases, which varied the gasification process used and the scale of production, were investigated to determine the most suitable scale of operation for the UK. Two gasification processes were considered, these were O2-enriched air entrained flow gasification and Fast Internal Circulating Fluidised Bed. All performance and cost data have been taken from published literature, unless otherwise stated. Large-scale (1,200 tpd) ammonia production using O2-enriched air entrained flow gasification was determined as the most suitable system, producing the lowest ammonia-selling price, which was competitive to fossil fuels. Large-scale (1,200 tpd) combined natural gas/biomass syngas ammonia production also generated ammonia at a price competitive to fossil fuels.

Physicochemical properties of WOx/ZrO2 catalysts for palmitic acid esterification

A series of WOx/ZrO2 with various tungsten loadings was prepared via incipient-wetness impregnation of zirconium hydroxide. The resulting thermally processed materials were characterised by XRD, XPS, porosimetry, NH3-TPD and pyridine FTIR spectroscopy to elucidate their composition, morphology and acidity, and subsequently tested in the esterification of palmitic acid with methanol. Catalytic performance was strongly dependent upon calcination temperature and W surface density. Esterification activity increased with increasing surface W density, reaching a maximum at 8.9Wnm-2 corresponding to near monolayer coverage. Subsequent growth of crystalline WO3 lowered activity, consistent with a decrease in the density of active surface sites. Calcination temperatures as high as 800°C increased surface acidity and hence catalytic activity. The formation of polymeric tungstate species on zirconia is necessary to generate the Brönsted acid sites responsible for palmitic acid esterification under mild conditions. © 2014 Elsevier B.V.

Catalytic systems based on carbon fiber materials for the low-temperature oxidation of carbon monoxide

New heterogenized catalytic systems for the low-temperature oxidation of CO were synthesized by supporting solutions of Pd, Cu, and Fe salts on carbon fibrous materials (carbopon and busofit). The carbon supports were studied by elemental analysis, SEM, TGA, and TPD. The effects of the nature of the support, the concentration and composition of the active component, and the conditions of preparation on the efficiency of the catalytic system were studied. It was ascertained that attenuation of hydrophilic properties of the support led to the decrease in system activity. The investigation of the catalysts by XPS showed that sample treatment in the reaction medium results in redistribution of the components of the active phase in the near-surface layer of the catalyst. The catalytic system based on carbon fibrous material carbopon prepared by supporting active components (Pd, Cu, and Fe salts) in three stages with intermediate activation in the reaction medium ensures 95% conversion of CO under respiratory conditions, and is promising for the design of the main element of breathing masks on its basis.

The influence of surface functionalization of activated carbon on palladium dispersion and catalytic activity in hydrogen oxidation

Stone-fruit activated carbon (SAC) and modified versions containing acidic oxygen and basic nitrogen groups have been used to prepare palladium catalysts by wet impregnation. Carbon supports and catalysts are investigated by thermo-gravimetric analysis, TPD, oxygen chemisorption, TEM and XPS. The influence of the nature of the functional groups on the dispersion and oxidation state of palladium and its activity in hydrogen oxidation is investigated. Pd dispersion is found to increase with the basic strength of functional groups on the support. XPS reveals that introduction of amine groups in SAC results in an increased proportion of Pd0, resistant to re-oxidation. Palladium catalysts supported on activated carbon modified by diethylamine groups are found to exhibit the highest metal dispersion and greatest activity in hydrogen oxidation. © 2007 Elsevier B.V. All rights reserved.

Zirconium phosphate supported tungsten oxide solid acid catalysts for the esterification of palmitic acid

A series of zirconium phosphate supported WOx solid acid catalysts with W loadings from 1–25 wt% have been prepared on high surface area zirconium phosphate by a surface grafting method. Catalysts were characterized by N2 adsorption, FTIR, Raman, UV-Vis, 31P MAS NMR, pyridine TPD and X-ray methods. Spectroscopic measurements suggest a Keggin-type structure forms on the surface of zirconium phosphate as a ([triple bond, length as m-dash]ZrOH2+)(ZrPW11O405−) species. All catalysts show high activity in palmitic acid esterification with methanol. These materials can be readily separated from the reaction system for re-use, and are resistant to leaching of the active heteropolyacid, suggesting potential industrial applications in biodiesel synthesis. © The Royal Society of Chemistry 2006.

A Fast XPS study of the surface chemistry of ethanol over Pt{1 1 1}

The adsorption and reaction of ethanol over Pt{1 1 1} has been investigated by Fast XPS and TPD. Ethanol adsorbs molecularly at 100 K, with a saturation coverage of 0.44 ML giving rise to C 1s components with binding energies of 283.7 eV (CH3–) and 284.8 eV (–H2COH). Ethanol multilayers desorb above 150 K, while ∼60% of the monolayer desorbs intact above 200 K in competition with decomposition pathways. Reaction initially proceeds via progressive dehydrogenation to form a metastable acetyl intermediate with components at 283.5 eV (CH3–) and 285.2 eV (-C=O), which in turn undergoes decarbonylation above 250 K to chemisorbed CO and methyl groups. A significant fraction of the latter are hydrogenated above 270 K, desorbing as CH4, with the remainder further decomposing to liberate H2 and surface CHx moeities.

Serum α-tocopherol has a nonlinear inverse association with periodontitis among US adults

Background: Previous experimental models suggest that vitamin E may ameliorate periodontitis. However, epidemiologic studies show inconsistent evidence in supporting this plausible association. Objective: We aimed to investigate the association between serum α-tocopherol (αT) and γ-tocopherol (γT) and periodontitis in a large cross-sectional US population. Methods: This study included 4708 participants in the 1999–2001 NHANES. Serum tocopherols were measured by HPLC and values were adjusted by total cholesterol (TC). Periodontal status was assessed by mean clinical attachment loss (CAL) and probing pocket depth (PPD). Total periodontitis (TPD) was defined as the sum of mild, moderate, and severe periodontitis. All measurements were performed by NHANES. Results: Means ± SDs of serum αT:TC ratio from low to high quartiles were 4.0 ± 0.4, 4.8 ± 0.2, 5.7 ± 0.4, and 9.1 ± 2.7 μmol/mmol. In multivariate regression models, αT:TC quartiles were inversely associated with mean CAL (P-trend = 0.06), mean PPD (P-trend < 0.001), and TPD (P-trend < 0.001) overall. Adjusted mean differences (95% CIs) between the first and fourth quartile of αT:TC were 0.12 mm (0.03, 0.20; P-difference = 0.005) for mean CAL and 0.12 mm (0.06, 0.17; P < 0.001) for mean PPD, whereas corresponding OR for TPD was 1.65 (95% CI: 1.26, 2.16; P-difference = 0.001). In a dose-response analysis, a clear inverse association between αT:TC and mean CAL, mean PPD, and TPD was observed among participants with relatively low αT:TC. No differences were seen in participants with higher αT:TC ratios. Participants with γT:TC ratio in the interquartile range showed a significantly lower mean PPD than those in the highest quartile. Conclusions: A nonlinear inverse association was observed between serum αT and severity of periodontitis, which was restricted to adults with normal but relatively low αT status. These findings warrant further confirmation in longitudinal or intervention settings.

The devil is in the detail:tobacco industry political influence in the Dutch implementation of the 2001 EU Tobacco Products Directive

Introduction - The Dutch implementation of the black border provision in the 2001 European Union Tobacco Products Directive (TPD) is studied to examine the implications of tobacco industry involvement in the implementation phase of the policy process. Methods - A qualitative analysis was conducted of Dutch government documents obtained through Freedom of Information Act requests, triangulated with in-depth interviews with key informants and secondary data sources (publicly available government documents, scientific literature, and news articles). Results - Tobacco manufacturers’ associations were given the opportunity to set implementation specifications via a fast-track deal with the government. The offer of early implementation of the labelling section of the TPD was used as political leverage by the industry, and underpinned by threats of litigation and arguments highlighting the risks of additional public costs and the benefits to the government of expediency and speed. Ultimately, the government agreed to the industry's interpretation, against the advice of the European Commission. Conclusions - The findings highlight the policy risks associated with corporate actors’ ability to use interactions over technical product specifications to influence the implementation of health policy and illustrate the difficulties in limiting industry interference in accordance with Article 5.3 of the Framework Convention on Tobacco Control (FCTC). The implementation phase is particularly vulnerable to industry influence, where negotiation with industry actors may be unavoidable and the practical implications of relatively technical considerations are not always apparent to policymakers. During the implementation of the new TPD 2014/40/EU, government officials are advised to take a proactive role in stipulating technical specifications.

Support enhanced α-pinene isomerization over HPW/SBA-15

A family of mesoporous SBA-15 supported H3PW12O40 (HPW) catalysts were synthesized by wet-impregnation and compared with fumed silica analogues for the solventless isomerization of α-pinene under mild conditions. Structural and acidic properties of supported HPW materials were characterized by powder XRD, HRTEM, XPS, TGA, N2 porosimetry, DRIFTS, and ammonia and propylamine chemisorption and TPD. The high area, mesoporous SBA-15 architecture facilitates the formation of highly dispersed (isolated or low dimensional) HPW clusters and concomitant high acid site densities (up to 0.54 mmol g−1) relative to fumed silica wherein large HPW crystallites are formed even at low HPW loadings. α-Pinene exhibits a volcano dependence on HPW loading over the SBA-15 support due to competition between the number and accessibility of acid sites to the non-polar reactant, with the superior acid site accessibility for HPW/SBA-15 conferring a 10-fold rate enhancement with respect to HPW/fumed silica and pure HPW. Monocyclic limonene and terpinolene products are favoured over polycyclic camphene and β-pinene by weaker polyoxometallate analogues over SBA-15.

Making coke a more efficient catalyst in the oxidative dehydrogenation of ethylbenzene using wide-pore transitional aluminas

The thermal activation of a silica-stabilized γ-Alumina impacts positively on the oxidative dehydrogenation of ethylbenzene (EB) to styrene (ST). A systematic thermal study reveals that the transition from γ-alumina into transitional phases at 1050C leads to an optimal enhancement of both conversion and selectivity under pseudo-steady state conditions; where active and selective coke have been deposited. The effect is observed in the reaction temperature range of 450-475C at given operation conditions resulting in the highest ST yield, while at 425C this effect is lost due to incomplete O2 conversion. The conversion increase is ascribed to the ST selectivity improvement that makes more O2 available for the main ODH reaction. The fresh aluminas and catalytically active carbon deposits on the spent catalysts were characterized by gas adsorption (N 2 and Ar), acidity evaluation by NH3-TPD and pyridine adsorption monitored by FTIR, thermal and elemental analyses, solubility in CH2Cl2 and MALDI-TOF to correlate the properties of both phases with the ST selectivity enhancement. Such an increase in selectivity was interpreted by the lower reactivity of the carbon deposits that diminished the COx formation. The site requirements of the optimal catalyst to create the more selective coke is related to the higher density of Lewis sites per surface area, no mixed Si-Al Brønsted sites are formed while the acid strength of the formed Lewis sites is relatively weaker than those of the bare alumina. © 2013 Elsevier B.V. All rights reserved.

Serum α-tocopherol has a nonlinear inverse association with periodontitis among US adults

Previous experimental models suggest that vitamin E may ameliorate periodontitis. However, epidemiologic studies show inconsistent evidence in supporting this plausible association. We aimed to investigate the association between serum α-tocopherol (αT) and γ-tocopherol (γT) and periodontitis in a large cross-sectional US population. This study included 4708 participants in the 1999–2001 NHANES. Serum tocopherols were measured by HPLC and values were adjusted by total cholesterol (TC). Periodontal status was assessed by mean clinical attachment loss (CAL) and probing pocket depth (PPD). Total periodontitis (TPD) was defined as the sum of mild, moderate, and severe periodontitis. All measurements were performed by NHANES. Means ± SDs of serum αT:TC ratio from low to high quartiles were 4.0 ± 0.4, 4.8 ± 0.2, 5.7 ± 0.4, and 9.1 ± 2.7 μmol/mmol. In multivariate regression models, αT:TC quartiles were inversely associated with mean CAL (P-trend = 0.06), mean PPD (P-trend < 0.001), and TPD (P-trend < 0.001) overall. Adjusted mean differences (95% CIs) between the first and fourth quartile of αT:TC were 0.12 mm (0.03, 0.20; P-difference = 0.005) for mean CAL and 0.12 mm (0.06, 0.17; P < 0.001) for mean PPD, whereas corresponding OR for TPD was 1.65 (95% CI: 1.26, 2.16; P-difference = 0.001). In a dose-response analysis, a clear inverse association between αT:TC and mean CAL, mean PPD, and TPD was observed among participants with relatively low αT:TC. No differences were seen in participants with higher αT:TC ratios. Participants with γT:TC ratio in the interquartile range showed a significantly lower mean PPD than those in the highest quartile. A nonlinear inverse association was observed between serum αT and severity of periodontitis, which was restricted to adults with normal but relatively low αT status. These findings warrant further confirmation in longitudinal or intervention settings.

De relatie tussen de professionele ruimte van leraren en hun deelname aan professionaliseringsactiviteiten: de modererende rol van motivatie

Meinen, E. (2016). De relatie tussen de professionele ruimte van leraren en hun deelname aan professionaliseringsactiviteiten:de modererende rol van motivatie. Mei, 23, 2016, Heerlen, Nederland: Open Universiteit

Catalizzatori polifunzionali per la sintesi di Metil Isobutil Chetone

In this work, we have examined the activity and selectivity of new catalysts for the single-stage production of methyl isobutyl ketone (MIBK, 4- methyl-2-pentanone) from acetone (both in liquid and gas phase), using a fixed bed reactor operated in the temperature range between 373 and 473 K. The main reaction pathways for the synthesis of MIBK from acetone are given in Fig.1. The first step is the self condensation of acetone to diacetone alcohol (DAA, 4-hydroxy-4-methyl-2-pentanone); the second step is the dehydration of DAA to mesityl oxide (MO, 4-methyl-3-penten-2-one); the final step is the selective hydrogenation of the carbon–carbon double bond of MO to form MIBK. The most commonly observed side reactions are over-condensations and unselective hydrogenations (also shown in Fig.1). Two types of catalysts were studied: i)Pd supported on MgO-SiO2 mixed oxides with ratio of Mg to Si, synthetized using Ohnishi’s method and ii)Pd supported on alumina doped with 5% or 10% of MgO. The different Mg-Si and Mg-Al catalysts were characterized by different techniques (XRD, BET, SEM, NH3-TPD and CO2-TPD) and tested under different conditions in the condensation of acetone to diacetone alcohol and its dehydration to mesityl oxide to enhance the activity. Palladium was chosen as metal component, and its hydrogenation activity was studied. A low hydrogenation activity negatively affects the acetone conversion and promotes the production of mesityl oxide. Hydrogenation conditions being too severe may favor the unwanted hydrogenation of acetone to 2-propanol and of MIBK to methyl isobutyl carbinol (MIBC, 4-methyl-2-pentanol) but this effect is less detrimental to the MIBK selectivity than an unsufficient hydrogenation activity.

Erros de comunicação entre Protésicos e Médicos Dentistas

Este trabalho consiste numa revisão de literatura sobre os erros de comunicação entre dois grupos de profissionais, cujos trabalhos na área da Medicina Dentária se complementam: o Médico Dentista (MD) e o Técnico de Prótese Dentária (TPD). A comunicação entre estes dois grupos é o um fator muito importante e deve existir uma boa sinergia para que o trabalho seja executado com o maior rigor e qualidade possível. Esta pressupõe aspetos funcionais, biomecânicos, estruturais e estéticos, da reabilitação a realizar, potenciando deste modo a máxima de qualquer tratamento médico: a satisfação do paciente. O objetivo que se propõe é expor os erros decorrentes de falhas de comunicação e alertar os MD e TPD para a mudança do nível de colaboração. É também objetivo desmistificar a postura dos MD em relação à Prótese Dentária. O culminar deste trabalho de equipa traduz-se na promoção da Saúde Oral e melhor qualidade de vida dos pacientes. As falhas na comunicação são o principal entrave ao sucesso da reabilitação protética, pois impedem a conjugação dos conhecimentos científicos e técnicos de ambos os profissionais perpetuando erros ao longo das etapas de fabrico. Com base numa pesquisa relacionada com a comunicação entre MD e TPD, utilizando-se as palavras-chave “dentist technician relationship”, “dentist technician communication”, “dentist technician survey”, “dental fixed architecture” e “dental technicians fabrication”, através dos motores de busca Pubmed, Scielo e Science Direct, foi realizada uma revisão de literatura com o intuito de avaliar a comunicação entre TPD e MD. Procurou-se caracterizar que tipos de erros que podem ser cometidos, bem como formas para melhorar a comunicação. Após a revisão, constatou-se que existe uma grande deficiência a nível de comunicação entre MD e TPD e que tal facto induz a que um trabalho perca em termos de qualidade. Também se verificou que os erros cometidos são a nível académico e profissional, proporcionando a que o trabalho final resulte na insatisfação do paciente, bem como dos profissionais envolvidos.