Development and validation of HPLC method for quantitative analysis of triamcinolone in biodegradable microparticles

A simple, rapid, selective and specific high performance liquid chromatographic (HPLC) method for quantitative analysis of the triamcinolone in polylactide-co-glycolide acid (PLGA) microparticles was developed. The chromatographic parameters were reversed-phase C18 column, 250mm x 4.6mm, with particle size 5 μm. The column oven was thermostated at 35°C ± 2°C. The mobile phase was methanol/water 45:55 (v/v) and elution was isocratic at a flow-rate of 1 mL.mL-1. The determinations were performed using a UV-Vis detector at 239 nm. The injected sample volume was 10 μL. The standard curve was linear (r2 > 0.999) in the concentration range 100-2500 ng.mL-1. The method showed adequate precision, with a relative standard deviation (RSD) was smaller than 3%. The accuracy was analyzed by adding a standard drug and good recovery values were obtained for all drug concentrations used. The method showed specificity and selectivity with linearity in the working range and good precision and accuracy, making it very suitable for quantitation of triamcinolone in PLGA microparticles.

Finite element analysis of warpage in laminated aluminium alloy plates for machining of primary aeronautic parts

The aim of this paper consists in presenting a method of simulating the warpage in 7xxx series aluminium alloy plates. To perform this simulation finite element software MSC.Patran and MSC.Marc were used. Another result of this analysis will be the influence on material residual stresses induced on the raw material during the rolling process upon the warpage of primary aeronautic parts, fabricated through machining (milling) at Embraer. The method used to determinate the aluminium plate residual stress was Layer Removal Test. The numerical algorithm Modified Flavenot Method was used to convert layer removal and beam deflection in stress level. With such information about the level and profile of residual stresses become possible, during the step that anticipate the manufacturing to incorporate these values in the finite-element approach for modelling warpage parts. Based on that warpage parameter surely the products are manufactured with low relative vulnerability propitiating competitiveness and price. © 2007 American Institute of Physics.

SEM analysis of the in situ early bacterial colonization on two novel feldspathic ceramics submitted to different types of glazing

Aim: The aim of this study was to evaluate in situ, the early bacterial colonization on feldspar-ceramics submitted to different glazing. Methods and Materials: Fourteen standardized disc specimens (diameter: 5 mm, thickness: 1.5 mm) of each of two micro-particulate feldspathic ceramics (VM7 and VM13, Vita) were produced according to manufacturers' specifications for a total of 28 specimens (24 for the analysis of biofilm and 4 for topographic analysis analyzing the ceramic surfaces). Specimens from each type of ceramic were submitted to two different glazing methods composing four groups: VM7 glazed using glazing liquid Vita Akzent® 25 (G1) and glaze firing (G2), VM13 glazed using glazing liquid (G3) and glaze firing (G4). Six individuals (n=6) wore oral appliances with four ceramic specimens, fixed on the buccal face of the appliances. After 8 hours, each sample was evaluated for the presence (1) or absence (0) of bacterial colonization under a scanning electron microscope (SEM) on five randomly selected fields. The value for each sample was cumulative of the results observed in the fields. One sample from each group was evaluated under a SEM to verify the topographic pattern. Results: There was no difference with regard to bacterial colonization between the feldspar-ceramics and between the glazing types (Kruskal-Wallis non-parametric test). Conclusion: Feldspar-ceramics submitted to firing or glaze firing with Vita Akzent® 25 present a similar condition for in situ bacterial colonization. The similar topographic pattern of the ceramic surfaces seems to have influenced the bacterial colonization.

Comparative analysis of regionalism in Latin America and Asia-Pacific

Includes bibliography

Module for the analysis of growth in international commerce (MAGIC Plus): user guide (updated)

Includes bibliography

A simple and environmentally friendly reflectometric method for the rapid quantitative analysis of captopril in pharmaceutical formulations

This paper describes a simple, environmentally friendly and rapid quantitative spot test procedure for the determination of captopril (CPT) in bulk drug and in pharmaceutical formulations by using diffuse reflectance spectroscopy. The proposed method is based on the reflectance measurements of the orange compound (λ max 490 nm) produced by the spot test reaction between CPT and p-chloranil (CL). Under optimal conditions, calibration curves were obtained for CPT by plotting the optical density of the reflectance signal (A R) vs. the log of the mol L -1 concentration, from 6.91×10 -3 to 1.17×10 -1, with a good coefficient of determination (R 2 = 0.9992). The common excipients used as additives in pharmaceuticals do not interfere in the proposed method. The method was applied to determine CPT in commercial pharmaceutical formulations. The results obtained by the proposed method are compared favorably with those obtained by an official procedure at 95% confidence level. The method validation results showed that the sensitivity and selectivity of the methods were adequated for drug monitoring in industrial quality control laboratories. © 2011 Moment Publication.

Reinventing development: utopias devised by committees and seeds of change in the real world

Includes bibliography

Analysis of inteins in the Candida parapsilosis complex for simple and accurate species identification

Inteins are coding sequences that are transcribed and translated with flanking sequences and then are excised by an autocatalytic process. There are two types of inteins in fungi, mini-inteins and full-length inteins, both of which present a splicing domain containing well-conserved amino acid sequences. Full-length inteins also present a homing endonuclease domain that makes the intein a mobile genetic element. These parasitic genetic elements are located in highly conserved genes and may allow for the differentiation of closely related species of the Candida parapsilosis (psilosis) complex. The correct identification of the three psilosis complex species C. parapsilosis, Candida metapsilosis, and Candida orthopsilosis is very important in the clinical setting for improving antifungal therapy and patient care. In this work, we analyzed inteins that are present in the vacuolar ATPase gene VMA and in the threonyl-tRNA synthetase gene ThrRS in 85 strains of the Candida psilosis complex (46 C. parapsilosis, 17 C. metapsilosis, and 22 C. orthopsilosis). Here, we describe an accessible and accurate technique based on a single PCR that is able to differentiate the psilosis complex based on the VMA intein. Although the ThrRS intein does not distinguish the three species of the psilosis complex by PCR product size, it can differentiate them by sequencing and phylogenetic analysis. Furthermore, this intein is unusually present as both mini- and full-length forms in C. orthopsilosis. Additional population studies should be performed to address whether this represents a common intraspecific variability or the presence of subspecies within C. orthopsilosis. Copyright © 2013, American Society for Microbiology. All Rights Reserved.

Women's participation in economic activity as a strategic factor of change in fertility: the cases of Mexico and Costa Rica

Includes bibliography

Comparative analysis of fertility in seven Latin American countries

Los temas que se incluiran en un estudio comparativo sobre la fecundidad en algunos paises latinoamericanos, basado en los resultados de la Encuesta Mundial de Fecundidad, se describen junto con las variables y las categorias adoptadas. Los niveles y tendencias de la fecundidad se hallan adecuadamente descritos por la tasa global de fecundidad en los anos previos a la encuesta. Los diferenciales socio-economicos mas importantes serian la magnitud de la localidad de residencia, la educacion de ambos conyuges, la situacion ocupacional del marido, la participacion de la mujer en la actividad economica y la movilidad geografica. Variables importantes para determinar la formacion de la familia es la nupcialidad (numero y duracion de las uniones y edad a la primera union) y duracion de los intervalos intergenesicos, que a su vez pueden variar segun el tipo de resultados del embarazo y del empleo de planificacion familiar. El deseo de tener mas hijos juega un papel importante en ultima instancia en la determinacion del comportamiento reproductivo.

Comparative analysis of fertility in seven Latin American countries; programmed analytical tabulations

Capítulo 2 del documento "Comparative analysis of fertility in seven Latin American countries"

A comparative analysis of productivity in Brazilian and Mexican manufacturing industries

This article analyses productivity trends in Brazilian and Mexican manufacturing industries between 1995 and 2009, a period in which international competition intensified sharply. A total of 14 manufacturing industries are considered, using two methods based on: (i) the Leontief (1951) model to measure the consumption of intermediate goods used in production; and (ii) the analysis of total factor productivity (TFP). The studies performed show that manufacturing trends have diverged in the two countries. In Mexico, an increased need for imported goods and services was offset by a reduction in domestic goods and service requirements, and an increase in the TFP of production. In the case of Brazil, the fact that manufactured goods markets are more isolated from foreign trade seems to have contributed to a weak productivity performance.

MALDI Imaging Analysis of Neuropeptides in the Africanized Honeybee (Apis mellifera) Brain: Effect of Ontogeny

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Exploratory analysis of differences in sperm morphology in Nelore and Gir (Bos indicus) bulls

The aim of this study was to evaluate the effects of breed and season on semen quality parameters of zebu bulls. Data (1,632 registers) of semen production from Gir (n = 4) and Nelore (n = 15) bulls were collected between October 2005 and November 2009. The ejaculates were collected twice a week during various seasons (summer, fall, winter, and spring) and evaluated for the following semen parameters: ejaculate volume, sperm concentration, sperm motility, forward progressive motility (FPM), and sperm morphology. Factor analysis was used to determine the relationship among variables. The effect of breed (Gir and Nelore) and season and their cross effect on each parameter and extracted factor were tested using ANOVA. A negative correlation (P < 0.05) was observed between FPM and proximal droplet, as well as with abnormal loose head, abnormal small head, pouch formation, abnormal mid-peace, and strongly folded tail. Gir bull sperm showed more major defects, detached acrosome, and minor FPM (P < 0.01), whereas Nelore bulls showed a higher number of sperm with normally loose head.