Mecanismos celulares, stress oxidativo e balanço protease-antiprotease na DPOC : revisão de literatura

Trabalho Final do Curso de Mestrado Integrado em Medicina, Faculdade de Medicina, Universidade de Lisboa, 2014

Novas terapêuticas não farmacológicas da perturbação do pós-stress traumático

Trabalho Final do Curso de Mestrado Integrado em Medicina, Faculdade de Medicina, Universidade de Lisboa, 2014

Avaliação de floculante natural à base de Moringa oleifera no tratamento de água produzida na indústria do petróleo: aplicação da técnica combinada floculação/flotação

The principal effluent in the oil industry is the produced water, which is commonly associated to the produced oil. It presents a pronounced volume of production and it can be reflected on the environment and society, if its discharge is unappropriated. Therefore, it is indispensable a valuable careful to establish and maintain its management. The traditional treatment of produced water, usualy includes both tecniques, flocculation and flotation. At flocculation processes, there are traditional floculant agents that aren’t well specified by tecnichal information tables and still expensive. As for the flotation process, it’s the step in which is possible to separate the suspended particles in the effluent. The dissolved air flotation (DAF) is a technique that has been consolidating economically and environmentally, presenting great reliability when compared with other processes. The DAF is presented as a process widely used in various fields of water and wastewater treatment around the globe. In this regard, this study was aimed to evaluate the potential of an alternative natural flocculant agent based on Moringa oleifera to reduce the amount of oil and grease (TOG) in produced water from the oil industry by the method of flocculation/DAF. the natural flocculant agent was evaluated by its efficacy, as well as its efficiency when compared with two commercial flocculant agents normally used by the petroleum industry. The experiments were conducted following an experimental design and the overall efficiencies for all flocculants were treated through statistical calculation based on the use of STATISTICA software version 10.0. Therefore, contour surfaces were obtained from the experimental design and were interpreted in terms of the response variable removal efficiency TOG (total oil and greases). The plan still allowed to obtain mathematical models for calculating the response variable in the studied conditions. Commercial flocculants showed similar behavior, with an average overall efficiency of 90% for oil removal, however it is the economical analysis the decisive factor to choose one of these flocculant agents to the process. The natural alternative flocculant agent based on Moringa oleifera showed lower separation efficiency than those of commercials one (average 70%), on the other hand this flocculant causes less environmental impacts and it´s less expensive

Obtenção, caracterização e utilização de um compósito com matriz de resina poliéster e carga de fibras de sisal

The constant search for sustainable alternatives has earned great effort of researchers in research and obtaining new materials, encouraging the rise of eco-friendly productive development and providing simple and practical solutions to economic profitability. In this sense, the use of materials derived from natural renewable sources, vegetables, has great potential applicability to sustainable development. As alternative materials plant fibers can be applied to production of a range of composite materials easing the use of materials derived from non-renewable this thesis were sisal mats used for achieving a composite matrix having as one orthophthalic polyester resin. The webs were subjected to surface treatment in boiling water for 15 minutes. The webs of sisal fibers used were, respectively, 5%, 10% and 15% of the composite weight. The composite was obtained and characterized mechanically and thermally to the chosen formulations. several plates of the composite to obtain the body of evidence for the characterization tests complying with the relevant rules were made. The obtained composites showed strength tensile and bending lower than the array, so it can be used where are required low load requests. The most significant result of the composite studied given to the impact energy absorption, far superior to the matrix used. Other properties were highlighted in oil absorption, and density. It proved the feasibility of obtaining the composite for the three formulations studied C5, C10 and C15 being the most feasible to C10. To demonstrate the feasibility of using composite were made a wall clock, a bench, a chair and a shelf, low mechanical stress structures. It was concluded that the sisal rugs exercised the load function in the composite.

Obtenção, caracterização e utilização de um compósito com matriz de resina poliéster e carga de fibras de sisal

The constant search for sustainable alternatives has earned great effort of researchers in research and obtaining new materials, encouraging the rise of eco-friendly productive development and providing simple and practical solutions to economic profitability. In this sense, the use of materials derived from natural renewable sources, vegetables, has great potential applicability to sustainable development. As alternative materials plant fibers can be applied to production of a range of composite materials easing the use of materials derived from non-renewable this thesis were sisal mats used for achieving a composite matrix having as one orthophthalic polyester resin. The webs were subjected to surface treatment in boiling water for 15 minutes. The webs of sisal fibers used were, respectively, 5%, 10% and 15% of the composite weight. The composite was obtained and characterized mechanically and thermally to the chosen formulations. several plates of the composite to obtain the body of evidence for the characterization tests complying with the relevant rules were made. The obtained composites showed strength tensile and bending lower than the array, so it can be used where are required low load requests. The most significant result of the composite studied given to the impact energy absorption, far superior to the matrix used. Other properties were highlighted in oil absorption, and density. It proved the feasibility of obtaining the composite for the three formulations studied C5, C10 and C15 being the most feasible to C10. To demonstrate the feasibility of using composite were made a wall clock, a bench, a chair and a shelf, low mechanical stress structures. It was concluded that the sisal rugs exercised the load function in the composite.

Influência dos ácidos graxos do tipo ômega-3 ou ômega-6 e o nanomaterial de carbono fulereno (C60) no estado antioxidante em suspensões celulares de cérebro de Cyprinus carpio (Pisces, Cyprinidae)

Os nanomateriais de carbono como o fulereno (C60) apresenta comportamentos bioquímicos distintos, podendo atuar como antioxidante ou pró-oxidante em diferentes sistemas biológicos. Outra evidência ao C60 refere-se a sua característica lipofilica, na qual oferece ação mais direta a diferentes tipos de membranas celulares. Do mesmo modo ácidos graxos poliinsaturados (AGPs) como o ômega-3 (DHA) e o ômega-6 (LA) são importantes para funções celulares da membrana, sendo considerados antioxidantes clássicos. Dessa forma este estudo avaliou em suspensões celulares de cérebro da carpa (Cyprinus carpio, Cyprinidae), o efeito de C60 após um pré-tratamento com DHA ou LA. Para tal avaliação os ensaios consistiram em um pré-tratamento com AGPs (48h) e após exposição a C60 (2h). Como resultados observamos que a viabilidade celular e a capacidade antioxidante total não apresentaram diferença (p> 0.05) entre todos os grupos. Em relação a valores de espécies ativas de oxigênio e dano lipídico foi observado redução nos seus valores nos grupos expostos ao C60 pré – tratados com AGPs (p<0.05). Em termos de cisteína, ocorre uma redução da sua concentração em todos os grupos expostos ao C60. Porém para glutationa a exposição ao C60 provoca um aumento de sua concentração nos grupo controle (sem AGPs) e no grupo pré – tratado com DHA. Dessa forma consideramos que o pré – tratamento com AGPs é benéfico às células, uma vez que um aumento nos níveis de glutationa e uma diminuição na concentração de espécies ativas de oxigênio e peroxidação lipídica foram observados nos grupos expostos ao C60. Sendo assim um bom estado nutritivo em termos da concentração de AGPs foi considerado benéfico na exposição ao fulereno.

Modulação da expressão da proteína XPA em resposta ao tratamento com azul de metileno fotossensibilizado

Reactive oxygen species (ROS) are produced by aerobic metabolism and react with biomolecules, such as lipids, proteins and DNA. In high concentration, they lead to oxidative stress. Among ROS, singlet oxygen (1O2) is one of the main ROS involved in oxidative stress and is one of the most reactive forms of molecular oxygen. The exposure of some dyes, such as methylene blue (MB) to light (MB+VL), is able to generate 1O2 and it is the principle involved in photodynamic therapy (PDT). 1O2 e other ROS have caused toxic and carcinogenic effects and have been associated with ageing, neurodegenerative diseases and cancer. Oxidative DNA damage is mainly repaired by base excision repair (BER) pathway. However, recent studies have observed the involvement of nucleotide excision repair (NER) factors in the repair of this type of injury. One of these factors is the Xeroderma Pigmentosum Complementation Group A (XPA) protein, which acts with other proteins in DNA damage recognition and in the recruitment of other repair factors. Moreover, oxidative agents such as 1O2 can induce gene expression. In this context, this study aimed at evaluating the response of XPA-deficient cells after treatment with photosensitized MB. For this purpose, we analyzed the cell viability and occurrence of oxidative DNA damage in cells lines proficient and deficient in XPA after treatment with MB+VL, and evaluated the expression of this enzyme in proficient and complemented cells. Our results indicate an increased resistance to treatment of complemented cells and a higher level of oxidative damage in the deficient cell lines. Furthermore, the treatment was able to modulate the XPA expression up to 24 hours later. These results indicate a direct evidence for the involvement of NER enzymes in the repair of oxidative damage. Besides, a better understanding of the effects of PDT on the induction of gene expression could be provided

Impacto da relação entre médico veterinário e proprietário no tratamento recebido por felinos domésticos

Dissertação de Mestrado Integrado em Medicina Veterinária

Tratamento térmico do titânio e suas consequências sobre as propriedades físico-químicas e de biocompatibilidade

The titanium and titanium alloys are widely used as biomaterial in biomedical device and so research have been developed aiming to improve and/or better to understand interaction biomaterial/biological environment. The process for manufacturing of this titanium implants usually involves a series of thermal and mechanical processes which have consequence on the final product. The heat treatments are usually used to obtain different properties for each application. In order to understand the influence of these treatments on the biological response of the surface, it was done, in this work, different heat treatments in titanium and analyzed their influence on the morphology, adhesion and proliferation of the pre-osteoblastic cells (MC3T3-E1). For such heat-treated titanium disks were characterized by optical microscopy, contact angle, surface energy, roughness, microhardness, X-ray diffraction and scanning through the techniques (BSE, EDS and EBSD). For the analysis of biological response were tested by MTT proliferation, adhesion by crystal violet and β1 integrin expression by flow cytometry. It was found that the presence of a microstructure very orderly, defined by a chemical attack, cells tend to stretch in the same direction of orientation of the material microstructure. When this order does not happen, the most important factor influencing cell proliferation is the residual stress, indicated by the hardness of the material. This way the disks with the highest level state of residual stress also showed increased cell proliferation

Using induced pluripotent stem cells to investigate the mechanistic link between Gaucher disease and Parkinson related synucleinopathies

Dissertação de Mestrado, Ciências Biomédicas, Departamento de Ciências Biomédicas e Medicina, Universidade do Algarve, 2015

Evaluation of the antioxidant activity and antitumor activity of marine invertebrates extracts

Dissertação de Mestrado, Biologia Marinha, Faculdade de Ciências e Tecnologias, Universidade do Algarve, 2014

Biological indicators of stress in pacu (Piaractus mesopotamicus) after capture

Os efeitos da captura (perseguição, contenção em puçá e exposição aérea) no perfil sanguíneo do cortisol, glicose, cloreto, sódio, potássio, cálcio e na osmolaridade, hematócrito, hemoglobina, número de células vermelhas (CV) e volume corpuscular médio (VCM) foram investigados no pacu (Piaractus mesopotamicus). Um total de 132 peixes (49,7 ± 11,7 g) foi submetido à captura com 3 ou 5 minutos de exposição aérea. Nove peixes de cada tratamento foram amostrados 5, 15, 30, 60 minutos e 24 horas depois e outros nove peixes foram amostrados antes da captura e considerados controle. A captura resultou em aumento do cortisol e glicose no sangue 30 e 5 minutos depois da captura, respectivamente, independente do tempo de exposição aérea. Ambos os indicadores recuperaram os valores controle em 24 horas. Nos dois grupos de peixes, o cloreto plasmático diminuiu 60 minutos após captura e não recuperou os valores controle, enquanto o sódio sérico aumentou entre 15 e 30 minutos recuperando a condição controle em 24 horas. Não houve alteração significativa nos valores de potássio, cálcio, osmolaridade ou no hematócrito, hemoglobina, CV e VCM como consequência da captura. Os estressores sequenciais aplicados no pacu durante a captura ativaram o eixo cérebro-pituitária-interrenal (respostas do cortisol e glicose), mas a ativação do eixo cérebro-sistema simpático-células cromafins foi aparentemente moderada (respostas iônicas e hematológicas).

Anxiety, stress and depression in young adults with type 1 Diabetes

Introdução: A vida dos jovens adultos com diabetes tipo 1 (DM1) tem muitas exigências e as consequências psicológicas da adesão contínua aos aspetos do tratamento pode afetar a qualidade de vida. Objetivos: Conhecer o suporte social, satisfação com a vida, ansiedade, stresse e depressão nos jovens adultos com DM1. Material e Métodos: Estudo quantitativo realizado com 278 jovens adultos com DM1 (18 - 35 anos). Resultados: Os jovens consideram ter bom suporte social. A média de satisfação com a vida é 6,6 ±1,7 (escala 0-10). A maior parte dos jovens não apresenta estados persistentes de ansiedade e de excitação e tensão (stresse), pelo que têm resistência à frustração e desilusão. A maioria dos jovens não apresenta sintomas de depressão, revelando auto-estima, sentimentos positivos, motivação, entusiasmo e perceção da probabilidade de alcançar objetivos de vida que sejam significativos. A análise fatorial das escalas de ansiedade, stresse e depressão permitiu encontrar 3 fatores que explicam 50% da variância total: stresse (36%), ansiedade (8%), depressão (6%). Conclusões: Os jovens adultos com DM1 têm bom suporte social e satisfação com a vida. A maior parte dos jovens não revela sintomas de ansiedade, stresse e depressão. O suporte social e a satisfação com a vida poderão contribuir para uma boa saúde mental.

Molecular mechanisms controlling physiological plasticity in marine mussels under the influence of natural and anthropogenic stress factors

Marine mussels are exceptionally well-adapted to live in transitional habitats where they are exposed to fluctuating environmental parameters and elevated levels of natural and anthropogenic stressors throughout their lifecycle. However, there is a dearth of information about the molecular mechanisms that assist in dealing with environmental changes. This project aims to investigate the molecular mechanisms governing acclimatory and stress responses of the Mediterranean mussel (Mytilus galloprovincialis) by addressing relevant life stages and environmental stressors of emerging concern. The experimental approach consisted of two phases to explore (i) the physiological processes at early life history and the consequences of plastic pollution and (ii) the adult physiology processes under natural habitats. As the first phase, I employed a plastic leachate (styrene monomer), and polystyrene microplastics to understand the modulation of cytoprotective mechanisms during the early embryo stages. Results revealed the onset of transcriptional impairments of genes involved in MXR-related transporters and other physiological processes induced by styrene and PS-MPs. In the second phase, as a preliminary analysis, microbiota profile of adult mussels at the tissue scale and its surrounding water was explored to understand microbiota structures that may reflect peculiar adaptations to the respective tissue functions. The broader experiment has been implemented to understand the variability of transcriptional profiles in the mussel digestive glands in the natural setting. All the genes employed in this study have shown possibilities to use as molecular biomarker responses throughout the year for monitoring the physiology of mussels living in a particular environment and, in turn, more properly detecting changes in the environment. As a whole, my studies provide insights into the interactions between environmental parameters, and intrinsic characters, and physiology of marine bivalves, and it could help to interpretation of responses correctly under stress conditions and climate change scenarios.

Effect Of Platform Connection And Abutment Material On Stress Distribution In Single Anterior Implant-supported Restorations: A Nonlinear 3-dimensional Finite Element Analysis.

Although various abutment connections and materials have recently been introduced, insufficient data exist regarding the effect of stress distribution on their mechanical performance. The purpose of this study was to investigate the effect of different abutment materials and platform connections on stress distribution in single anterior implant-supported restorations with the finite element method. Nine experimental groups were modeled from the combination of 3 platform connections (external hexagon, internal hexagon, and Morse tapered) and 3 abutment materials (titanium, zirconia, and hybrid) as follows: external hexagon-titanium, external hexagon-zirconia, external hexagon-hybrid, internal hexagon-titanium, internal hexagon-zirconia, internal hexagon-hybrid, Morse tapered-titanium, Morse tapered-zirconia, and Morse tapered-hybrid. Finite element models consisted of a 4×13-mm implant, anatomic abutment, and lithium disilicate central incisor crown cemented over the abutment. The 49 N occlusal loading was applied in 6 steps to simulate the incisal guidance. Equivalent von Mises stress (σvM) was used for both the qualitative and quantitative evaluation of the implant and abutment in all the groups and the maximum (σmax) and minimum (σmin) principal stresses for the numerical comparison of the zirconia parts. The highest abutment σvM occurred in the Morse-tapered groups and the lowest in the external hexagon-hybrid, internal hexagon-titanium, and internal hexagon-hybrid groups. The σmax and σmin values were lower in the hybrid groups than in the zirconia groups. The stress distribution concentrated in the abutment-implant interface in all the groups, regardless of the platform connection or abutment material. The platform connection influenced the stress on abutments more than the abutment material. The stress values for implants were similar among different platform connections, but greater stress concentrations were observed in internal connections.