Intellectual Property Management in a Small Company

Opinnäytetyö keskittyi kriittisiin tapahtumiin, joita on tullut yhtiön tai sen edeltävän yhtiön, joka oli Mobile Screen TV – 4 ALL, tekemien aikaisempien patenttihakemusten yhteydessä . Tutkimus vertasi ja evaluoi yhtiön aikaisemmin tekemien keksintöjen suojausta. Toisaalta opinnäytetyön päämäärä oli tutkia ja selvittää monitapaus-menetelmällä yhtiön aikaisempia keksintöjä ja miten aineettoman oikeuden suojaus toteutui prosessien eri vaiheissa. Tämä päättötyötutkielma vei loppuun asti erittäin suuren patenttien ja hyödyllisyysmallien hakemusten tutkimuksen. LH Communications Oy on tehnyt monia niistä, mutta tutkimus sisälsi myös joitakin kilpailijoiden hakemuksia. Tässä tutkimuksessa oli kaksi pääkysymystä. Miten pieni yhtiö voisi suojella heidän uusia ideoitaan ja keksintöjään ja myös samalla pitää yhtiön talouden hyvällä tasolla. Tämä tutkimus käytti The Critical Incidents Technique (CIT), joka keskittyy kriittisiin tapahtumiin, selvittääkseen sopivia menetelmiä pienelle yhtiölle siitä, miten suojella uusia ajatuksia, ideoita ja keksintöjä ja samanaikaisesti olla tuottava niiden kanssa. Tutkimuksemme käsitteli kaikenlaisia tarvittavia käytäntöjä pienessä yhtiössä ja päähuomio pienessä yhtiössä tulee olla omien keksintöjen suojaamisessa. Paras suojaus on tehdä patentteja, mutta se tulee maksamaan hyvin paljon koko tapahtumasarjan aikana.

Mathematical models to describe the volumetric shrinkage rate of red beans during drying

The present study aimed to determine the volumetric shrinkage rate of bean (Phaseolus vulgaris L.) seeds during air-drying under different conditions of air, temperature and relative humidity, and to adjust several mathematical models to the empiric values observed, and select the one that best represents the phenomenon. Six mathematical models were adjusted to the experimental values to represent the phenomenon. It was determined the degree of adjustment of each model from the value of the coefficient of determination, the behavior of the distribution of the residuals, and the magnitude of the average relative and estimated errors. The rate of volumetric shrinkage that occurred in bean seeds during drying is between 25 and 37%. It basically depends on the final moisture content, regardless of the air conditions during drying. The Modified Bala & Woods' model best represented the process.

Method adjustment and equation set of maximum rainfall intensity, duration and frequency in the Mato Grosso do Sul State

Due to the lack of information concerning maximum rainfall equations for most locations in Mato Grosso do Sul State, the alternative for carrying out hydraulic work projects has been information from meteorological stations closest to the location in which the project is carried out. Alternative methods, such as 24 hours rain disaggregation method from rainfall data due to greater availability of stations and longer observations can work. Based on this approach, the objective of this study was to estimate maximum rainfall equations for Mato Grosso do Sul State by adjusting the 24 hours rain disaggregation method, depending on data obtained from rain gauge stations from Dourado and Campo Grande. For this purpose, data consisting of 105 rainfall stations were used, which are available in the ANA (Water Resources Management National Agency) database. Based on the results we concluded: the intense rainfall equations obtained by pluviogram analysis showed determination coefficient above 99%; and the performance of 24 hours rain disaggregation method was classified as excellent, based on relative average error WILMOTT concordance index (1982).

Management of commercial property derived risks in the market context of the Russian Federation

The objective of the thesis is to examine the current state of risk management and to determine an appropriate risk management policy for commercial property derived risks in the Russian branch of a Finnish retail trade company. The employed research methodologies are comparative in-depth interviews and empirical value at risk analysis, including portfolio risk decomposition to determine the inter-currency characteristics. For a multinational retail trade company, the commercial property derived risks open up as a diverse combination of financial and non-financial risks with four distinctive interest groups. The research results indicate that geographical diversification across currency regimes provides diversification benefits. The Russian ruble is the most significant single risk component when considering the net investments outside the euro-zone. Decreasing the Russian ruble and Swedish krona exposures are the most effective methods to reduce translation derived risk. Exchange rate volatility varies over time according to idiosyncratic currency regime characteristics, and cost-effective risk management requires comprehensive analysis of the business environment. Profound and proactive risk management methods are found to be pivotal for companies with cross-border operations in order to succeed among international competitors.

Intellectual Property Protection in China in the Cases of Outsourcing and own Manufacturing

The intellectual property (IP) environment in China is still very immature. There are several problems in legal, political, economic, social-cultural, competitive and labor environment which have hindered IP legal enforcement. Under such circumstances, IP misappropriation is a major concern especially for foreign small and medium-sized enterprises (SMEs) doing business in China. These circumstances require foreign companies, no matter whether they are multinational corporations (MNCs) or SMEs and have own manufacturing in China or not, to take strong IP actions. Therefore, the purpose of this study is to discuss how IP can be protected in China in the case of outsourcing and in the case of own manufacturing. The comparison will consider the process of outsourcing and own manufacturing consisting two stages: preparation stage and operation stage. In order to clarify the conceptual arguments, two illustrative case studies were studied. The case data bases on two semi-structured interviews of the managing directors, field notes and archival data. The findings propose that attention in IP protection should be given to following issues: integrating IP strategy into the company’s business strategy, protecting the most critical knowledge, regarding IP steps as a whole in the protection mechanism and making IP strategy as proactive as possible. The major difference between outsourcing and own manufacturing in IP protection is in the operation stage. Besides, the findings also provide managerial advice on IP protection, e.g. foreign managers should be prepared for IP risks in China, they should establish an own IP protection mechanism which matches the company’s situation and they should consider IP protection as an on-going process.

The potential of social networking sites in inpatriate adjustment

People make up one of the most important resources for a corporation and therefore it has to continuously seek an ever more diverse and international workforce. Inpatriation is another way of utilizing foreign expertise in a corporation. An inpatriate refers to a person that is on an international assignment at the headquarters of a corporation, where they have been sent either from a subsidiary abroad or from a third country outside the corporation. Strengthening the social network of the inpatriate and their family contributes to the adjustment process and furthermore the success of the work assignment. As social networking sites are currently the fastest developing personal networking tools in the world, it is interesting to see how they can help in inpatriate adjustment. The objective of this thesis is to explore the potential of social networking sites (SNS) in inpatriate adjustment. The main objective can be divided into three sub objectives: 1. What is SNS used for during the inpatriate assignment? 2. What are the inpatriates’ motivations to use SNS? 3. Could the three facets of adjustment (work, interaction and general) be gained through SNS? This qualitative study utilizes the theme interview data collection method and the thematic analysis approach for analysing the interview data. From the interviews with five Indian inpatriates in Finland the most mentioned uses of SNS were related to participating (sharing opinions, recommendations and discussing things and connecting to friends, family and colleagues) and consuming (collecting information for work and free time), the least mentioned use of SNS was producing (posting videos, photos and updates). An interesting finding was that the five interviewees did not use SNS for purely entertainment motives at all during their assignment. This thesis found that all three facets of adjustment could potentially be gained through SNS.

Startup IPR strategies: Why should startup companies protect their intellectual property?

This thesis studies intellectual property right (also: IPR) strategies from the perspective of high growth startup companies. Due to technology development and intellectualization of business, large part of companies’ assets are nowadays intangible. At the same time, the importance of protection instruments designed to protect these intangible assets, intellectual property rights, is increasing. Utilization of these instruments, however, requires understanding of the functioning of the IPR system, as well as financial resources. Startup companies aiming for growth need to be able compete with more established companies also in relation to intangible assets, but they might not have the required knowledge ot resources to fully utilize IPRs in their business. This research aims to understand what are the benefits a startup company can have from protecting their IPRs, and how can the company achieve those benefits. Based on a review of previous literature, altogether 11 benefits of IPR registration were recognized. To answer to the research questions, six half-structured interviews were conducted with experts form different fields, all with experience in working with startup companies and IPR issues. The interviews were analyzed using different methods of qualitative data analysis, mainly derived from grounded theory and case study methods. As a result, out of the 11 benefits recognized from earlier literature, 8 were recognized to be relevant for startup companies. The most central benefits were recognized to be linked with the financial lifecycle of the startup company, including increasing credibility of the startup and stimulating an investment. In addition it was noticed, that startup companies are mainly able to utilize these benefits at later stages of their lifecycle. However, to be able to utilize the benefits at later stages, the startup company needs to be aware of the functioning of the IPR system and might need to apply for appropriate protection already early on. As a result of this study, a three-step model was formed to describe different levels of IPR utilization. The first level of the model represents the minimum level of understanding that every startup company should have regarding IPRs. The second level views IPR strategy from a risk management perspective, including securing the minimum protection of the company’s own IPRs, contract management and establishing processes for handling IPR issues. The last stage reflects strategic use of IPRs. At this third stage intellectual property rights have a central role in the startup company’s business, and they are used in the company’s value creation.

The adjustment from Russia to Finland for corporate repatriates: How the repatriation experience influences readjustment in the workplace

To manage foreign operations, companies must often send their employees on international assignments. Repatriating these expatriates can be difficult because they have been forgotten during their posting, and their new experiences are not utilised. In addition to the possible difficulties in organisational repatriation, the returnee can suffer from readjustment problems after a lengthy stay abroad has changed their habits and even identity. This thesis examines the repatriation experience of Finnish assignees returning from Russia. The purpose of the study is to understand how the repatriation experience influences their readjustment to work in Finland. This experience is influenced by many factors including personal and situational changes, the repatriation process, job and organisational factors, and individual’s motives. The theoretical background of the study is founded on two models of repatriation adjustment. A refined, holistic theoretical framework for the study is created. It describes the formation of the repatriation experience and its importance for readjustment to work and retention. The qualitative research approach is suitable for the thesis which examines the returnees’ personal experiences and feelings: a qualitative case study aims to explain the phenomenon in-depth and comprehensively. The data was collected in summer 2013 through semi-standardised interviews with eight Finnish repatriates. They had returned from Russia within the last two years. The data was analysed by structuring the interview transcripts using template analysis. The results supported earlier literature and suggest that the re-entry remains a challenging phase for both the individual and the company. For some, adjusting to a new job was difficult for various reasons. The repatriates underwent personal change and development and felt it was for the better. Many repatriates criticised the company’s repatriation process upon return. Finding a suitable return job was not clear. Instead, the returnees had to be active in finding a new position. Many assignees had only modest career-related motives regarding the assignment and they had realistic expectations about the return. Therefore they were not extremely surprised or dissatisfied when they were not actively offered positions or support by the company. The significance of motives stood out even more than the theory predicted. As predicted, they are linked to the expectations of employees. Moreover, if the employees are motivated to remain in the company, they can tolerate partly a negative repatriation experience. Despite the complexity of the return and readjustment, the assignment as a whole was seen as a rewarding experience by all participants.

Modification of commercial poly-lactide for extrusion coated food packaging applications

Poly-L-lactide (PLLA) is a widely used sustainable and biodegradable alternative to replace synthetic non-degradable plastic materials in the packaging industry. Conversely, its processing properties are not always optimal, e.g. insufficient melt strength at higher temperatures (necessary in extrusion coating processes). This thesis reports on research to improve properties of commercial PLLA grade (3051D from NatureWorks), to satisfy and extend end-use applications, such as food packaging by blending with modified PLLA. Adjustment of the processability by chain branching of commercial poly-L-lactide initiated by peroxide was evaluated. Several well-defined branched structures with four arms (sPLLA) were synthesized using pentaerythritol as a tetra-functional initiator. Finally, several block copolymers consisting of polyethylene glycol and PLLA (i.e. PEGLA) were produced to obtain a well extruded material with improved heat sealing properties. Reactive extrusion of poly-L-lactide was carried out in the presence of 0.1, 0.3 and 0.5 wt% of various peroxides [tert-butyl-peroxybenzoate (TBPB), 2,5-dimethyl-2,5-(tert-butylperoxy)-hexane (Lupersol 101; LOL1) and benzoyl peroxide (BPO)] at 190C. The peroxide-treated PLLAs showed increased complex viscosity and storage modulus at lower frequencies, indicating the formation of branched/cross linked architectures. The material property changes were dependent on the peroxide, and the used peroxide concentration. Gel fraction analysis showed that the peroxides, afforded different gel contents, and especially 0.5 wt% peroxide, produced both an extremely high molar mass, and a cross linked structure, not perhaps well suited for e.g. further use in a blending step. The thermal behavior was somewhat unexpected as the materials prepared with 0.5 wt% peroxide showed the highest ability for crystallization and cold crystallization, despite substantial cross linking. The peroxide-modified PLLA, i.e. PLLA melt extruded with 0.3 wt% of TBPB and LOL1 and 0.5 wt% BPO was added to linear PLLA in ratios of 5, 15 and 30 wt%. All blends showed increased zero shear viscosity, elastic nature (storage modulus) and shear sensitivity. All blends remained amorphous, though the ability of annealing was improved slightly. Extrusion coating on paperboard was conducted with PLLA, and peroxide-modified PLLA blends (90:10). All blends were processable, but only PLLA with 0.3 wt% of LOL1 afforded a smooth high quality surface with improved line speed. Adhesion levels between fiber and plastic, as well as heat seal performance were marginally reduced compared with pure 3051D. The water vapor transmission measurements (WVTR) of the blends containing LOL1 showed acceptable levels, only slightly lower than for comparable PLLA 3051D. A series of four-arm star-shaped poly-L-lactide (sPLLA) with different branch length was synthesized by ring opening polymerization (ROP) of L-lactide using pentaerythritol as initiator and stannous octoate as catalyst. The star-shaped polymers were further blended with its linear resin and studied for their melt flow and thermal properties. Blends containing 30 wt% of sPLLA with low molecular weight (30 wt%; Mwtotal: 2500 g mol-1 and 15000 g mol-1) showed lower zero shear viscosity and significantly increased shear thinning, while at the same time slightly increased crystallization of the blend. However, the amount of crystallization increased significantly with the higher molecular weight sPLLA, therefore the star-shaped structure may play a role as nucleating agent. PLLA-polyethylene glycol–PLLA triblock copolymers (PEGLA) with different PLLA block length were synthesized and their applicability as blends with linear PLLA (3051D NatureWorks) was investigated with the intention of improving heat-seal and adhesion properties of extrusion-coated paperboard. PLLA-PEG-PLLA was obtained by ring opening polymerization (ROP) of L-lactide using PEG (molecular weight 6000 g mol-1) as an initiator, and stannous octoate as catalyst. The structures of the PEGLAs were characterized by proton nuclear magnetic resonance spectroscopy (1H-NMR). The melt flow and thermal properties of all PEGLAs and their blends were evaluated using dynamic rheology, and differential scanning calorimeter (DSC). All blends containing 30 wt% of PEGLAs showed slightly higher zero shear viscosity, higher shear thinning and increased melt elasticity (based on tan delta). Nevertheless, no significant changes in thermal properties were distinguished. High molecular weight PEGLAs were used in extrusion coating line with 3051D without problems.

Bully-victims: Prevalence, psychosocial adjustment, and responsiveness to intervention

In this thesis, a unique subgroup involved in the bullying phenomenon, the bully-victims, are identified and examined. Despite the increasing attention on the bully-victims in recent years, their prevalence, psychosocial adjustment, and response to anti-bullying programs has not been clearly determined. Three empirical studies were conducted in this thesis to examine the prevalence of bully-victims. Moreover, in study I, the psychosocial adjustment of bully-victims was compared with that of pure bullies, pure victims, and non-involved students. In study II, different forms of bullying and victimization were compared among pure bullies, pure victims, bully-victims, and non-involved students. In study III, the effectiveness of anti-bullying programs, in particular, the KiVa program, on bully-victims was demonstrated. Overall, bully-victims formed the smallest group comparing with pure bullies, pure victims, and non-involved students, and in general differed from pure bullies rather than pure victims in terms of subjective experience of maladjustment. They employed more verbal, physical, and cyberbullying perpetration, but not indirect bullying; and they were more victimized by verbal, physical, cyber, and indirect bullying. The KiVa anti-bullying program in Finland is effective in reducing the prevalence of bully-victims.