Influence of Current Pulse Shape on Directly Modulated Systems Performance in Metro Area Optical Networks

Due to the fact that a metro network market is very cost sensitive, direct modulated schemes appear attractive. In this paper a CWDM (Coarse Wavelength Division Multiplexing) system is studied in detail by means of an Optical Communication System Design Software; a detailed study of the modulated current shape (exponential, sine and gaussian) for 2.5 Gb/s CWDM Metropolitan Area Networks is performed to evaluate its tolerance to linear impairments such as signal-to-noise-ratio degradation and dispersion. Point-to-point links are investigated and optimum design parameters are obtained. Through extensive sets of simulation results, it is shown that some of these shape pulses are more tolerant to dispersion when compared with conventional gaussian shape pulses. In order to achieve a low Bit Error Rate (BER), different types of optical transmitters are considered including strongly adiabatic and transient chirp dominated Directly Modulated Lasers (DMLs). We have used fibers with different dispersion characteristics, showing that the system performance depends, strongly, on the chosen DML?fiber couple.

Real-time reliability test for a CPV module based on a power degradation model

Models based on degradation are powerful and useful tools to evaluate the reliability of those devices in which failure happens because of degradation in the performance parameters. This paper presents a procedure for assessing the reliability of concentrator photovoltaic (CPV) modules operating outdoors in real-time conditions. With this model, the main reliability functions are predicted. This model has been applied to a real case with a module composed of GaAs single-junction solar cells and total internal reflection (TIR) optics

Cup Anemometer's loss of performance due to ageing process, and its effect on Annual energy Production (AEP) estimates

The deviation of calibration coefficients from five cup anemometer models over time was analyzed. The analysis was based on a series of laboratory calibrations between January 2001 and August 2010. The analysis was performed on two different groups of anemometers: (1) anemometers not used for any industrial purpose (that is, just stored); and (2) anemometers used in different industrial applications (mainly in the field—or outside—applications like wind farms). Results indicate a loss of performance of the studied anemometers over time. In the case of the unused anemometers the degradation shows a clear pattern. In the case of the anemometers used in the field, the data analyzed also suggest a loss of performance, yet the degradation does not show a clear trend. A recalibration schedule is proposed based on the observed performances variations

Performance analysis of a 7-kW crystalline silicon generator after 17 years of operation in Madrid

The degradation observed on a 7-kWp Si-x photovoltaic array after 17 years of exposure on the roof of the Solar Energy Institute of the Polytechnic University of Madrid is presented. The mean peak power degradation has been 9% over this time, or an equivalent to 0.53% per year, whereas peak power standard deviation has remained constant. The main visual defects are backsheet delamination at the polyester/polyvinyl fluoride outer interface and cracks in the terminal boxes and at the joint between the frame and the laminate. Insulation resistance complies well with the requirements of the International Electrotechnical Commission 61215 tests.

Observed degradation in photovoltaic plants affected by hot-spots

A number of findings have shown that the test procedures currently available to determine the reliability and durability of photovoltaic (PV) modules are insufficient to detect certain problems. To improve these procedures, ongoing research into the actual performance of the modules in the field is required. However, scientific literature contains but few references to field studies of defective modules. This article studies two different localized heating phenomena affecting the PV modules of two large-scale PV plants in Spain. The first problem relates to weak solder joints whilst the second is due to microcracks on the module cells. For both cases, the cause is identified, and consideration is given with regard to the effect on performance, the potential deterioration over time, and a way to detect the problems identified. The findings contained in this paper will prove to be of considerable interest to maintenance personnel at large-scale PV plants and also to those responsible for setting module quality standards and specifications, and even the PV module manufacturers themselves.

Sol-gel TiO2 nanoparticles prompt photocatalytic cement for pollution degradation

TiO2 nanoparticles (TiO2NPs) prepared by the sol–gel method have been incorporated to cement paste with the aim of creating a photocatalytic system capable of compensating, through degradation of hazardous molecules, the envi- ronmental impact associated to the production of the clinker. Doping was carried out at different mass ratios with TiO2NPs precursor solutions within a fresh ce- ment paste, which was then characterized using scanning electron microscopy (SEM). The photocatalytic performance was evaluated by the degradation of Methylene Blue (MB) using a 125W UV lamp as irradiating source. Main cement properties such as hydration degree and C-S-H content are affected by TiO2NPs doping level. Cement containing TiO2NPs exhibited an increasing photocatalytic activity for increasing doping, while the pure cement paste control could hardly degrade MB. The kinetics of the system where also studied and their second order behavior related to microstructural aspects of the system.

Unearthing the roots of degradation of Quercus pyrenaica coppices: an integrative perspective from clonal structure to carbon budgets

Quercus pyrenaica es una especie rebrotadora de raíz intensa e históricamente aprovechada en monte bajo para la obtención de leñas, carbón y pastos. Debido al éxodo rural y a la aparición de nuevas fuentes energéticas, este aprovechamiento fue abandonado en la década de 1970. Desde entonces, las bajas producciones de madera y bellota y el puntisecado de los pies evidencian el generalizado estancamiento de estas masas. Uno de los mayores retos actuales de la selvicultura en el ámbito mediterráneo es encontrar usos alternativos para estos montes abandonados, siendo la conversión a monte alto una de las alternativas preferidas. Se han realizado resalveos de conversión, sin embrago, éstos se aplican sin un conocimiento integral de las causas de la degradación. En esta tesis doctoral, estudiamos un hipotético desequilibrio entre la parte radical y la parte aérea (R:S) de las cepas de rebollo como causa subyacente de su decaimiento. En una parcela experimental, aprovechada al menos desde el siglo XII, se realizaron análisis genéticos a priori para elucidar la estructura genética del rodal, y así estudiar la influencia del tamaño clonal en el funcionamiento de las cepas. Las cepas de mayor tamaño presentaron un menor crecimiento diametral de sus pies, así como mayores tasas de respiración radical, estimadas a partir de flujos internos de CO2 a través del xilema (FT) y de los flujos de CO2 del suelo. Estos resultados sugieren que el desequilibrio R:S aumenta con el tamaño clonal, dado que la eliminación periódica de órganos aéreos, al mismo tiempo que las raíces permanecen intactas, da lugar a un gran desarrollo del sistema radical que consume gran parte de los carbohidratos no estructurales (NSC) en respiración de mantenimiento, comprometiendo así el desarrollo de órganos aéreos. Se excavaron y pesaron dos cepas compuestas por cuatro y ocho pies, las cuales mostraron ratios R:S (0.5 y 1, respectivamente) superiores a los registrados en pies de origen sexual. Al igual que en otras especies rebrotadoras de raíz, se observaron altas concentraciones de NSC en las raíces (> 20% en primavera) y una gran proporción de albura en el sistema radical (52%) que alberga una notable reserva de NSC (87 kg en la cepa de mayor tamaño). En el sistema radical de dicha cepa, estimada mediante dataciones radiocarbónicas en 550 años de edad, se contaron 248 uniones radicales. La persistencia de sistemas radicales grandes, viejos, y altamente interconectados sugiere que la gran cantidad de recursos almacenados y consumidos en las raíces compensan un pobre desarrollo aéreo con una alta resiliencia vegetativa. Para un mejor entendimiento de los balances de carbono y del agotamiento de NSC en las cepas de rebollo, se midieron los flujos internos y externos de CO2 en troncos y los flujos de CO2 del suelo, y se estimó la respiración de órganos aéreos (RS) y subterráneos (RR). Estacionalmente, RS y RR reflejaron las dinámicas de flujo de savia y de crecimiento del tronco, y estuvieron determinadas principalmente por los flujos externos de CO2, dada la escasa contribución de FT a RS y RR (< 10% y < 2%, respectivamente). En una escala circadiana, la contribución de FT a RS aumentó hasta un 25% en momentos de alta transpiración. Las bajas concentraciones de CO2 en el xilema ([CO2] hasta un 0.11%) determinaron comparativamente unos bajos FT, probablemente causados por una limitada respiración del xilema y una baja resistencia a la difusión radial del CO2 impuestos por la sequía estival. Los pulsos de [CO2] observados tras las primeras lluvias de otoño apoyan esta idea. A lo largo del periodo vegetativo, el flujo medio de CO2 procedente del suelo (39 mol CO2 day-1) fue el mayor flujo respiratorio, tres y cuatro veces superior a RS (12 mol CO2 day-1) y RR (8-9 mol CO2 day-1), respectivamente. Ratios RR/RS menores que la unidad evidencian un importante peso de la respiración aérea como sumidero de carbono adicional. Finalmente, se ensayó el zanjado de raíces y el anillamiento de troncos como tratamientos selvícolas alternativos con el objetivo de aumentar las reservas de NSC en los troncos de las cepas. Los resultados preliminares desaconsejan el zanjado de raíces por el alto coste derivado posiblemente de la cicatrización de las heridas. El anillado de troncos imposibilitó el transporte de NSC a las raíces y aumentó la concentración de almidón por encima de la zona anillada, mientras que sistema radical se mantiene por los pies no anillados de la cepa. Son necesarias más mediciones y datos adicionales para comprobar el mantenimiento de esta respuesta positiva a largo plazo. Para concluir, destacamos la necesidad de estudios multidisciplinares que permitan una comprensión integral de la degradación de los rebollares ibéricos para poder aplicar a posteriori una gestión adecuada en estos montes bajos abandonados. ABSTRACT Quercus pyrenaica is a vigorous root-resprouting species intensively and historically coppiced for firewood, charcoal and woody pastures. Due to the rural exodus and the appearance of new energy sources, coppicing was abandoned towards 1970. Since then, tree overaging has resulted in stand stagnation displayed by slow stem growth, branch dieback, and scarce acorn production. The urgent need to find new alternative uses for abandoned coppices is recognized as one of the biggest challenges which currently faces Mediterranean silviculture; conversion into high forest by thinning is one of the preferred alternatives. For this aim, thinning has been broadly applied and seldom tested, although without a comprehensive understanding of the causes of stand stagnation. In this PhD study, we test the hypothesis of an imbalance between above- and below-ground organs, result of long term coppicing, as the underlying cause of Q. pyrenaica decay. In an experimental plot coppiced since at least the 12th century, genetic analyses were performed a priori to elucidate inconspicuous clonal structure of Q. pyrenaica to evaluate how clonal size affects the functioning of these multi-stemmed trees. Clonal size negatively affected diametric stem growth, whereas root respiration rates, measured by internal fluxes of CO2 through xylem (FT) and soil CO2 efflux, increased with clonal size. These results suggest root-to-shoot (R:S) imbalance intensifying with clonal size: periodic removal of aboveground organs whilst belowground organs remain undisturbed may have led to massive root systems which consume a great proportion of non-structural carbohydrates (NSC) for maintenance respiration, thus constraining aboveground performance. Furthermore, excavation of two multi-stemmed trees, composed by four and eight stems, revealed R:S ratios (0.5 and 1, respectively) greater than those reported for sexually regenerated trees. Moreover, as similarly observed in several root-resprouting species, NSC allocation to roots was favored ([NSC] > 20% in spring): a large proportion of sapwood maintained throughout the root system (52%) stored a remarkable NSC pool of 87 kg in the case of the largest clone. In this root system of the eight-stemmed tree, 248 root connections were counted and, by radiocarbon dating, its age was estimated to be 550-years-old. Persistence of massive, old and highly interconnected root systems suggests that enhanced belowground NSC storage and consumption reflects a trade-off between vegetative resilience and aboveground development. For a better understanding of tree carbon budget and the potential role of carbon starvation in Q. pyrenaica decay, internal and external stem CO2 fluxes and soil CO2 effluxes were monitored to evaluate respiratory costs above- and below-ground. On a seasonal scale, stem and root respiration (RS and RR) mirrored sap flow and stem growth dynamics. Respiration was determined to the greatest extent by external fluxes of CO2 to the atmosphere or soil, since FT accounted for a low proportion of RS and RR (< 10% and < 2%, respectively). On a diel scale, the contribution of FT to RS increased up to 25% at high transpiration rates. Comparatively low FT was determined by the low concentration of xylem CO2 registered ([CO2] as low as 0.11%), likely as a consequence of constrained xylem respiration and reduced resistance to CO2 radial diffusion imposed by summer drought. Xylem [CO2] pulses following first autumn rains support this idea. Averaged over the growing season, soil CO2 efflux was the greatest respiratory flux (39 mol CO2 day-1), three and four times greater than RS (12 mol CO2 day-1) and RR (8-9 mol CO2 day-1), respectively. Ratios of RR/RS below one evidence an additional and important weight of aboveground respiration as a tree carbon sink. Finally, root trenching and stem girdling were tested as complimentary treatments to thinning as a means to improve carbon reserves in stems of clonal trees. Preliminary results discouraged root trenching due to the high cost likely incurred for wound closure. Stem girdling successfully blocked NSC translocation downward, increasing starch concentrations above the girdled zone whilst the root system is fed by non-girdled stems within the clone. Further measurements and ancillary data are necessary to verify that this positive effect hold over time. To conclude, the need of multidisciplinary approaches for an integrative understanding on the functioning of abandoned Q pyrenaica coppices is highlighted for an appropriate management of these stands.

RNA analysis by ion-pair reversed-phase high performance liquid chromatography

Ion-pair reversed-phase high performance liquid chromatography (IP RP HPLC) is presented as a new, superior method for the analysis of RNA. IP RP HPLC provides a fast and reliable alternative to classical methods of RNA analysis, including separation of different RNA species, quantification and purification. RNA is stable under the analysis conditions used; degradation of RNA during the analyses was not observed. The versatility of IP RP HPLC for RNA analysis is demonstrated. Components of an RNA ladder, ranging in size from 155 to 1770 nt, were resolved. RNA transcripts of up to 5219 nt were analyzed, their integrity determined and they were quantified and purified. Purification of mRNA from total RNA is described, separating mouse rRNA from poly(A)+ mRNA. IP RP HPLC is also suitable for the separation and purification of DIG-labeled from unlabeled RNA. RNA purified by IP RP HPLC exhibits improved stability.

Hydroperoxide lyase depletion in transgenic potato plants leads to an increase in aphid performance

Hydroperoxide lyases (HPLs) catalyze the cleavage of fatty acid hydroperoxides to aldehydes and oxoacids. These volatile aldehydes play a major role in forming the aroma of many plant fruits and flowers. In addition, they have antimicrobial activity in vitro and thus are thought to be involved in the plant defense response against pest and pathogen attack. An HPL activity present in potato leaves has been characterized and shown to cleave specifically 13-hydroperoxides of both linoleic and linolenic acids to yield hexanal and 3-hexenal, respectively, and 12-oxo-dodecenoic acid. A cDNA encoding this HPL has been isolated and used to monitor gene expression in healthy and mechanically damaged potato plants. HPL gene expression is subject to developmental control, being high in young leaves and attenuated in older ones, and it is induced weakly by wounding. HPL enzymatic activity, nevertheless, remains constant in leaves of different ages and also after wounding, suggesting that posttranscriptional mechanisms may regulate its activity levels. Antisense-mediated HPL depletion in transgenic potato plants has identified this enzyme as a major route of 13-fatty acid hydroperoxide degradation in the leaves. Although these transgenic plants have highly reduced levels of both hexanal and 3-hexenal, they show no phenotypic differences compared with wild-type ones, particularly in regard to the expression of wound-induced genes. However, aphids feeding on the HPL-depleted plants display approximately a two-fold increase in fecundity above those feeding on nontransformed plants, consistent with the hypothesis that HPL-derived products have a negative impact on aphid performance. Thus, HPL-catalyzed production of C6 aldehydes may be a key step of a built-in resistance mechanism of plants against some sucking insect pests.

Influence of thymol and silver nanoparticles on the degradation of poly(lactic acid) based nanocomposites: thermal and morphological properties

Biopolymers, such as poly(lactic acid) (PLA), have been proposed as environmentally-friendly alternatives in applications such as food packaging. In this work, silver nanoparticles and thymol were used as active additives in PLA matrices, combining the antibacterial activity of silver with the antioxidant performance of thymol. The combined action of both additives influenced PLA thermal degradation in ternary systems. DSC results showed that the addition of thymol resulted in a clear decrease of the glass transition temperature (Tg) of PLA, suggesting its plasticizing effect in PLA matrices. Slight modifications in mechanical properties of dog-bone bars were also observed after the addition of the active components, especially in the elastic modulus. FESEM analyses showed the good distribution of active additives through the PLA matrix, obtaining homogenous surfaces and highlighting the presence of silver nanoparticles successfully embedded into the bulk matrix. Degradation of these PLA-based nanocomposites with thymol and silver nanoparticles in composting conditions indicated that the inherent biodegradable character of this biopolymer was improved after this modification. The obtained nanocomposites showed suitable properties to be used as biodegradable active-food packaging systems with antioxidant and antimicrobial effects.

New and rebuilt brake master cylinder survey and performance evaluation. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Assessment of created wetland performance in Illinois /

Wetlands are extremely valuable natural features that have decreased significantly in number over time in Illinois and the United States ... Their important functions include flood protection, water conservation in times of drought, groundwater recharge, improvement of water quality through sediment reduction and contaminant removal, and providing habitat for native animals and plants, including many sensitive and state-listed threatened and endangered species ... Due to a federal "no net loss" policy on wetlands adopted through executive order by President George H. Bush in 1990, as well as a prevailing heightened interest in conservation in general, there is currently considerable interest in the restoration and creation of wetlands. Both Section-404 of the Clean Water Act of 1972 and the Swampbuster Provision of the Food Securities Act of 1985 require compensation or mitigation for the loss of wetlands. A number of federal and state programs such as Section 319 of the Clean Water Act and the Conservation Reserve Program within the Natural Resources Conservation Service (NRCS) encourage wetland restoration and creation. In addition, various conservation organizations, such as The Nature Conservancy and Ducks Unlimited are very active in wetland restoration. Despite wetland restoration efforts and the national goal of no net loss, wetlands and wetland functions continue to be lost due to degradation of existing wetlands ... Unfortunately, no reliable information exists on the quality of existing wetlands or on trends in wetland quality over time ... The functional quality of existing wetlands is likely decreasing in many areas due to the combined effects of habitat fragmentation, alteration of hydrology, invasive species, and continued input of nutrients and pollutants. Furthermore, it is still debatable whether created or restored wetlands can adequately replace the suite of ecological functions provided by natural wetlands ... and the failure of many wetland compensation projects contributes to a continued national net loss of wetland functions ... The need for post-construction site monitoring and assessment of created and restored wetlands to evaluate functional success is widely recognized. ... At this time, there is little agreement on how to assess the success on quality of wetland restorations or creations.

Optimization of integrated chemical-biological degradation of a reactive azo dye using response surface methodology

The integrated chemical-biological degradation combining advanced oxidation by UV/H2O2 followed by aerobic biodegradation was used to degrade C.I. Reactive Azo Red 195A, commonly used in the textile industry in Australia. An experimental design based on the response surface method was applied to evaluate the interactive effects of influencing factors (UV irradiation time, initial hydrogen peroxide dosage and recirculation ratio of the system) on decolourisation efficiency and optimizing the operating conditions of the treatment process. The effects were determined by the measurement of dye concentration and soluble chemical oxygen demand (S-COD). The results showed that the dye and S-COD removal were affected by all factors individually and interactively. Maximal colour degradation performance was predicted, and experimentally validated, with no recirculation, 30 min UV irradiation and 500 mg H2O2/L. The model predictions for colour removal, based on a three-factor/five-level Box-Wilson central composite design and the response surface method analysis, were found to be very close to additional experimental results obtained under near optimal conditions. This demonstrates the benefits of this approach in achieving good predictions while minimising the number of experiments required. (c) 2006 Elsevier B.V. All rights reserved.

Investigation of the oxidative degradation mechanisms and melt stabilisation of a new generation metallocene polytehylene

The two main objectives of the research work conducted were firstly, to investigate the processing and rheological characteristics of a new generation metallocene catalysed linear low density polyethylene (m-LLDPE), in order to establish the thermal oxidative degradation mechanism, and secondly, to examine the role of selected commercial stabilisers on the melt stability of the polymers. The unstabilised m-LLDPE polymer was extruded (pass I) using a twin screw extruder, at different temperatures (210-285°C) and screw speeds (50-20rpm) and was subjected to multiple extrusions (passes, 2-5) carried out under the same processing conditions used in the first pass. A traditional Ziegler/Natta catalysed linear low density polyethylene (z-LLDPE) produced by the same manufacturer was also subjected to a similar processing regime in order to compare the processability and the oxidative degradation mechanism (s) of the new m-LLDPE with that of the more traditional z-LLDPE. The effect of some of the main extrusion characteristics of the polymers (m-LLDPE and z-LLDPE) on their melt rheological behaviour was investigated by examining their melt flow performance monitored at two fixed low shear rate values, and their rheological behaviour investigated over the entire shear rates experienced during extrusion using a twin-bore capillary rheometer. Capillary rheometric measurements, which determine the viscous and elastic properties of polymers, have shown that both polymers are shear thinning but the m-LLDPE has a higher viscosity than z-LLDPE and the extent of reduction in viscosity of the former when the extrusion temperature was increased from 210°C to 285°C was much higher than in the case of the z-LLDPE polymer. This was supplied by the findings that the m-LLDPE polymer required higher power consumption under all extrusion conditions examined. It was fUliher revealed that the m-LLDPE undergoes a higher extent of melt fracture, the onset of which occurs under much lower shear rates than the Ziegler-based polymer and this was attributed to its higher shear viscosity and narrower molecular weight distribution (MWD). Melt flow measurements and GPC have shown that after the first extrusion pass, the initial narrower MWD of m-LLDPE is retained (compared to z-LLDPE), but upon further multiple extrusion passes it undergoes much faster broadening of its MWD which shifts to higher Mw polymer fractions, paliicularly at the high screw speeds. The MWD of z-LLDPE polymer on the other hand shifts towards the lower Mw end. All the evidence suggest therefore the m-LLDPE undergoes predominantly cross-linking reactions under all processing conditions whereas z-LLDPE undergoes both cross-linking and chain scission reactions with the latter occurring predominantly under more severe processing conditions (higher temperatures and screw speeds, 285°CI200rpm). The stabilisation of both polymers with synergistic combinations of a hindered phenol (Irganox 1076) and a phosphite (Weston 399) at low concentrations has shown a high extent of melt stabilisation in both polymers (extrusion temperatures 210-285°C and screw speeds 50-200rpm). The best Irganox 1076/Weston 399 system was found to be at an optimum 1:4 w/w ratio, respectively and was found to be most effective in the z-LLDPE polymer. The melt stabilising effectiveness of a Vitamin E/Ultranox 626 system used at a fraction of the total concentration of Irganox 1076/Weston 399 system was found to be higher in both polymers (under all extrusion conditions). It was found that AOs which operate primarily as alkyl (Re) radical scavengers are the most effective in inhibiting the thermal oxidative degradation of m-LLDPE in the melt; this polymer was shown to degrade in the melt primarily via alky radicals resulting in crosslinking. Metallocene polymers stabilised with single antioxidants of Irganox HP 136 (a lactone) and Irganox E201 (vitamin E) produced the highest extent of melt stability and the least discolouration during processing (260°C/1 OOrpm). Furthermore, synergistic combinations of Irganox HP I 36/Ultranox 626 (XP-60) system produced very high levels of melt and colour stability (comparable to the Vitamin E based systems) in the mLLDPE polymer. The addition of Irganox 1076 to an Irganox HP 136/Ultranox 626 system was found not to result in increasing melt stability but gave rise to increasing discolouration of the m-LLDPE polymer. The blending of a hydroxylamine (lrgastab FS042) with a lactone and Vitamin E (in combination with a phosphite) did not increase melt stability but induced severe discolouration of resultant polymer samples.

The performance of cement stabilised minestone

This study is concerned with the durability of cement stabilised minestone (CSM). Minestone is dominated by the clay-bearing mudrocks and shales of the Coal Measures. Consequently, engineering problems are often encountered due to the likelihood of these rocks undergoing volume change and degradation when exposed to fluctuations in moisture content. In addition, iron sulphides (chiefly pyrite) are frequently present in minestone as diagenetic minerals which on excavation have the potential to oxidise forming sulphate minerals. The oxidation of sulphides may in itself contribute to volume increase in pyritic rocks and sulphate minerals may combine with the products of cement hydration to produce further expansion. The physical and chemical properties of a wide range of minestones are determined and attempts are made to correlate these with the engineering performance of cement stabilised specimens subjected to short-term immersion in water. Criteria, based on these raw material indices are proposed with a view to eliminating minestones which are unsuitable. A long-term durability study is also described. In this, the geochemical stability of pyrite in CSM was examined together with the role played by the sulphur bearing mineralogy in determining the engineering performance of CSM's exposed to conditions of increased moisture availability. The nature of a number of disrupted CSM pavements which have been examined are also discussed.